Used Rotary Board Cutter for sale (9,999)

Condition: used, Year of construction: 1992, max. grinding diameter 0 mm grinding length 0 mm workpiece length 970 mm total power requirement 12 kW weight of the machine ca. 5 t Hjdet Hwpaopfx Abhep dimensions of the machine ca. m

Condition: used, Year of construction: 1994, workpiece diameter 110 mm grinding length 410 mm clamping length 20 mm Hodpfx Abet Hw Nmjhep total power requirement 0,25 kW weight of the machine ca. 500 kg dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: used, Year of construction: 2006, Offer in progress! Hedpfx Abjwftufohsp

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available Hedpfou Su Apox Abhsp This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1990, Motor output 5 kW Weight 1.500 kg Control cnc Hodpfx Abjwgnz Nehjp

Condition: new, Year of construction: 2026, functionality: fully functional, The basic components of the grinding machine include: base, slides, column with grinding wheel spindle, rotary table, and control cabinet. The table is driven by a mechanical transmission and a gearbox-frequency converter unit, and performs a rotary motion. The rotary speed of the table is adjusted using a potentiometer on the machine's control panel. In manual operation, the machine will have the ability to perform pulsed rotary movement of the table, controlled from the operator's panel. The transverse feed is performed by the column and spindle moving along the rolling guides of the base. This movement is realized using a ball screw with a belt drive and an asynchronous motor controlled by a frequency inverter. The vertical feed is performed by the spindle moving along the sliding guides of the column. A ball screw is used to drive the vertical feed. The continuous feed of the column is stepless. These values are set from the control panel. The machine will be equipped with a direct digital readout on the vertical axis with a resolution of 0.001 mm. An electronic handwheel for vertical axis feed during manual operation and an operator panel (programmable display) will be placed on the operator's panel. The grinding machine will have smooth adjustment of the grinding wheel spindle speed and the table speed. The machine will be able to operate in an automatic cycle with the possibility of programming the number of sparking passes and other parameters necessary for grinding in an automatic cycle. Safe operation of the grinding machine is ensured by a semi-enclosed cabin and all electrical and mechanical safeguards in accordance with CE standards. 1 Table working surface Ø800 mm 2 Maximum distance between the table surface and the spindle axis during manual spindle feed 350 mm 3 Minimum distance between the table surface and the spindle axis 125 mm 4 Maximum weight of the workpiece 2500 N 5 Range of steplessly adjustable table speed 2-100 m/min 6 Maximum horizontal column feed 450 mm 7 Range of steplessly adjustable column feed speed 0.2 – 3 m/min 8 Grinding wheel feed per: 1 encoder unit 0.001 mm Hjdpfx Aszfyvyjbhop 9 Minimum automatic grinding wheel feed 0.001 mm 10 Maximum automatic grinding wheel feed 0.040 mm 11 Speed of accelerated grinding wheel feed 1 m/min 12 Grinding wheel spindle speed 1000 – 2500 RPM 13 Diameter of new grinding wheel 400 mm 14 Diameter of worn grinding wheel 250 mm 15 Bore for mounting the grinding wheel 127 mm 16 Width of grinding wheel nominal / maximum 50 mm

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Hsdpfx Abot Hwq Rjhop Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.

Condition: used, Year of construction: 1982, x-travel 0 mm Hjdpfx Aot Hwr Ujbhep y-travel 0 mm table length 600 mm table width 400 mm total power requirement 2 kW weight of the machine ca. 1500 kg

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine Hodpjif Ek Rsfx Abhep • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) Hedpfx Abjfnlkwshep The machine is CE certified.

Condition: excellent (used), Here we offer you a Johansson coordinate measuring machine. This coordinate measuring machine is designed for measuring large workpieces. Johansson Cordimatic 7000 measuring machine with Renishaw retrofit (control system, rotary/swivel probe & probe changing library) Johansson Cordimatic 7000 measuring machine with Renishaw rotary/swivel head PH10T Hedpfezd N Shjx Abhep Measuring range: 28" x 17" x 13.5" Granite table size: 42" x 28" x 8" Equipped with: Computer Metrologic 1 joystick pendant control Metrologic software manuals Joystick and control system from RENISHAW SPA2 servo power amplifier UCC2 controller Type: Johansson Cordimatic 7000 coordinate measuring machine Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by phone.

Year of construction: 2002, condition: good (used), MEP CONDOR 90 CNC MR automatic CNC-controlled miter saw for cutting aluminum profiles, with automatic feed. Used, in excellent condition. Hsdpjikztpjfx Abhjp

Condition: good (used), 580 USED Revent rotary oven for 60x80 sheets. The oven is in good condition, dismantled. EXTERNAL DIMENSIONS (in cm): -W: 248 -L: 176 -H: 245 Hodpfxjlk Ef Ij Abhsp EQUIPMENT: - used oil burner, - stainless steel housing. The DIMSANTLED device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN, RUSSIAN.

Condition: good (used), 522 USED Sveba Dahlen bakery, trolley, rotary oven. EXTERNAL DIMENSIONS (in cm.) - W: 145 - L: 160 - H: 260 TECHNICAL DATA - dimensions of the trolley: 60/80 Hodpeikf Iusfx Abhsp EQUIPMENT: - gas or oil burner, - 2 trolleys. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Hedszddq Hspfx Abhsp Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: ready for operation (used), Design: drop through rotary valve, top connection: round flange, drive: SEW gear motor, with pneumatic air purge shaft sealing unit, filter regulator, pressure gauge, and hose connections, suitable for plastics, food products, pet food, animal feed, pharmaceuticals, infant formula, chemicals, biomass, aquaculture, dairy products, cosmetics, paints and coatings, minerals, recycling, batteries, and tires. Inspection on site is possible. The machine is not under power. Hodpfx Abezhw Sqehep

Year of construction: 2009, condition: ready for operation (used), Equipment: height-adjustable conveyor, lid sorting and feeding system, conveyor belt with infeed and outfeed section, stainless steel construction, safety enclosure with interlocked safety doors, integrated electrical control cabinet and operator panel, the machine is designed to process Pano TO 100mm PP HOmao closures without liners. Inspection on site is possible. Hjdjzhw Tnopfx Abhop

Condition: excellent (used), Fill 3D Ultrasonic Cutter Here we offer a Fill 3D ultrasonic cutting system. FILL 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasound-actuated cutting systems. Your advantages: Ergonomic loading and unloading Simple creation of cutting programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic cutter with low space requirements and simple kinematics. The Siemens CNC 840 D control system allows the cutting device to be programmed like a machine tool. Tool corrections or path changes can be easily carried out directly on the machine. As standard, the machine is equipped with a 20 kHz ultrasonic cutting unit. However, it can also be equipped with alternative systems. The cutter is equipped with a separate rotary axis to allow cutting of tight radii and to save other axis movements (5 + 1 axes). Technical data: Machine data Part length max. 1,000 mm Part width max. 900 mm Part height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control Siemens Sinumerik 840D sl Technical data overall system: Fill 5-axis guided CFRP cutting system Type: SM - 03 Electricity: Supply voltage: 3 x 400 V AC Supply frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3,920 mm Width: approx. 3,400 mm Height: approx. 3,500 mm Weight: Total weight: approx. 1,500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Type: Fill 5-axis guided CFRP cutting system Type: SM - 03 Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information are subject to change!) Hedpfx Abezdy Iajhep We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Professional dividing table / dividing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. This set is designed for milling machines and precision machining requiring angular division and indexing of parts. Technical data: • Dividing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm • Precise angular scale • Dividing plate with indexing crank • Robust cast iron construction • Ability to perform accurate angular divisions Applications: • Milling polygons Hsdpfjza Hidex Abhep • Manufacturing gears • Machining shafts and rotating components • Drilling holes at a specific angle • Tooling and production work Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck operates smoothly and securely clamps the part • Scales and dividing mechanism are clear and functional The set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The item being sold is exactly the one shown in the pictures.

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: 221-0404, Please refer to the images for the description. Manufacturer: JAUDT Dosiertechnik Maschinenfabrik GmbH Type: 6305 (scraper wheel lock) Year of manufacture: 2021 Order number: 221-0404 Serial number: 0463888 Dimensions: 350 × 350 mm (according to drawing ZSR 350x350/670) Weight: approx. 350 kg Motor: SEW-Eurodrive DRN100L8, 1.1 kW, IE3 Complete documentation in German is available. Hjdpezhmilefx Abhep If you have any questions, please do not hesitate to contact us.

Condition: good (used), 415 USED FN Aerotherm rotary rack oven. EXTERNAL DIMENSIONS (in cm): Hsdpfx Abszd Ay Eehep -W: 150, -D: 283 (with hood 350), -H: 241. Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN, RUSSIAN.

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Hjdpfx Absyz Adnjhep Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Year of construction: 2013, condition: good (used), LINK LABEL ISH 330 Cross Cutter → Year of manufacture: 2013 This machine is designed for precise cross-cutting of both printed and unprinted materials and is particularly well-suited for short production runs, variable cut lengths, and processing transparent substrates. Technical Specifications Unwinding System Hodpjycv Eyefx Abhjp → Integrated unwind unit → Loop control for stable web tension → Roll end sensor included Maximum Roll Diameter → 550 mm Maximum Web Width → 330 mm Cutting Length → Variable, programmable via touch screen → Skip function included → Intermediate cut programmable from 0.10 mm to 50.00 mm Maximum Speed → Up to 500 cuts per minute Drive and Control → Computer-controlled drive system → Touch screen operation Material Handling → Suitable for transparent materials → Suitable for printed and unprinted materials → Optical sensor for register control Delivery System → Delivery conveyor for shingled output → Pulse separation system for reliable product separation Infeed and Web Control → Pneumatic pressure rollers → Web tension control via integrated vacuum system → Vacuum pump included Electrical and Air Requirements Power Supply → 220 V → 10 A Compressed Air → Minimum 6 bar Dimensions and Weight Overall Dimensions (L x W x H) → 1,980 x 900 x 1,038 mm Machine Weight → Approx. 250 kg Why This Machine? The ISH 330 Cross Cutter stands out with its high cutting precision, flexible length programming, and superior web control. Its optical register system and vacuum-controlled web tension ensure reliable, consistent results even at high speeds and when working with challenging substrates such as transparent films. With its compact footprint and intuitive touch screen operation, it is the ideal choice for efficient finishing in modern label production environments.

Condition: good (used), 413 USED Unitherm rotary oven for 60x80 sheets. EXTERNAL DIMENSIONS (in cm): -W: 136, -D: 283 (with hood 275), Hsdpfszdyiqex Abhep -H: 290. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN, RUSSIAN.

Condition: excellent (used), emtest / AMETEK Automotive EMC Testing and Simulation System Manufacturer: emtest / AMETEK System: Automotive On-Board Network and EMC Testing System Hjdpfxjy Rlbhj Abhep For sale is a professional testing and simulation system for automotive, electronics, and EMC applications. The system is housed in a mobile 19" industrial cabinet and consists of several testing and simulation modules, including control software. System Components AutoWave Serial Number: P2133255901 VDS 200Q100.2-400 Voltage Drop Simulator Serial Number: P2135256067 PFM 200N100.1 Serial Number: P2124253356 Software autowave.control V7.4.5 Software license included The software is used to control the AutoWave system and the connected components. Communication is via Ethernet. A laptop or PC is not included in the scope of delivery. Interfaces Ethernet IEEE 488 USB Frame Bus In / Out Analog In DC Output Connectors CEE Power Connector Emergency Stop Switch Application Areas Automotive On-Board Network Simulation Voltage Drop Tests EMV/EMC Testing Electronics and Component Testing Research and Development Quality Assurance Technical Notes Four-Quadrant Voltage Drop Simulator Suitable for Automotive Testing Profiles Supports common testing standards such as LV124, LV148, ISO 7637-2, and ISO 16750. Output range according to documentation: -20 V to +80 V Bandwidth up to 250 kHz Condition Used equipment from industrial use. Optical condition, see pictures. The device can be switched on, displays are active. Scope of Delivery emtest / AMETEK testing system in an industrial cabinet AutoWave module VDS 200Q100.2-400 module PFM 200N100.1 module autowave.control V7.4.5 software Software license Connection and fan units Accessories as shown in the pictures Inspection possible by appointment. Loading can be arranged. Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. We will be happy to answer further questions by telephone.