Used Rotary Indexing Table for sale (18,714)

Condition: used, Year of construction: 2017, Rotary Indexing Table Manufacturer: Expert Tünkers Model: EDX810/0250/8 Fpedjyl Swwopfx Aa Nog Year of manufacture: 2017 8-station table (45° indexing steps)

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units rotary table diameter: 400 mm rotary indexing table: 60° pitch Fsdpfx Aonvdmwea Nopg weight: 2,6 to 1 switch cabinet 1 coolant tank

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder Fpodpfx Asgd D U Eoa Nog - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Fodpfx Aer I E Itoa Nepg Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Rotary Table WMW Type D 315 k Rotary table with mechanical drive, crank, and scale Dividing head, indexing table Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Crank with index plate and sector arm - Scale ring for reading at the crank - Readable degree graduation on the rotary table - Pivotable worm gear for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table surface - Cardan drive - Built-in index plate: 17-25-30-39-47-57 - Rotary table drive suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E - Dividing head (index plate = 20) suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition Fpodpfx Aasxcbpis Nog

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) Fpjdpfxexf Uyte Aa Neg - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg

Condition: used, Turntable, 180° indexing table, rotary table with base made from aluminium system profiles Positioning table, rotary indexing table, 180° BOSCH REXROTH aluminium system profile Rotary plate diameter under the assembly: Ø 220 mm Rotary plate base plate made of steel (L x W x H): 760 x 760 x 20 mm Build height (rotary plate only): 70 mm (from base plate to top of rotary plate) Aluminium frame profile: 60 x 90 mm - Very stably mounted rotary table, manually rotatable - Rotary plate with position query via electric position switch for 1 position - 2 manual index locking positions with release lever, with end stop damper - Electromechanical position locking - Superstructure made of aluminium (painted orange) - Stable base made of aluminium system profile Fpedpfx Aexf Uudea Nsg - Height-adjustable feet for leveling Frame dimensions (L x W x H): 760 x 760 x 800 mm Space requirement (L x W x H): 1000 x 950 x 1560 mm Weight: 335 kg Good condition

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Fjdpfx Aodzp T Nsa Nspg Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: used, No. 720: Seldom used pneumatic rotary indexing table, 270 mm, 8 positions No. 721: Machine vice, jaw width 125 mm, clamping width 250 mm, rotatable, 360-degree scale Fpedpfjyvqc Iex Aa Njg No. 722: Bending roll, 350 mm diameter, throat 50 x 60 mm, bending groove 20 mm diameter No. 723: Mounting plate, 500 mm diameter x 30 mm, flange 230 x 30 mm, second side 120 x 25 mm, mounting holes 6 positions No. 724: Flange 350 x 55 mm, collar 230 x 5 mm, 4 x M16 PCD 275 mm, bore 40 mm, bottom side recess 200 x 15 mm No. 725: Press brake tool, 90 degrees, bending length 250 mm, tool length 550 mm No. 726: Flange 250 x 30 mm, 4 bolts PCD 130 mm, 3 holes PCD 210 mm, bore 102 mm, lower side collar 200 x 5 mm No. 727: Festo feed unit BV 100200 with control block, max. belt width 60 mm, max. feed 200 mm No. 109: Electromechanical rotary indexing table, 8 stations, table 850 x 850 x 830 mm, 2 control cabinets Prices on request All dimensions are non-binding; if you require exact measurements, please inquire.

Condition: used, Motor-driven indexer and rotary table, also known as indexing table with 15° indexing lock. Manufacturer: WALTER, Type: TARM 125 Serial No.: 1156, Year of manufacture: approx. 1985 Indexing lock: 15° Flange mount: short taper DIN 55022 size 5, Ø 82 mm Internal diameter of chuck flange: Ø 44 mm Continuous internal diameter: Ø 40 mm Construction height to flange mount without taper: 163 mm Fodpsyhq A Defx Aa Nopg Horizontal clamping surface: 260 x 215 mm Vertical clamping surface: 195 x 160 mm Center height vertical: 125 mm Motor speed: 0 to 500 rpm Power supply: 380 Volt, 50 Hz - external control required (control unit not included) - can be used vertically and horizontally - usable as indexer or rotary transfer table - one direction of rotation continuous, the other direction with 15° indexing lock Space requirement L x W x H: 500 x 215 x 177 mm Weight: 42 kg Good condition

Condition: used, Year of construction: 2015, functionality: fully functional, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Manufacturer: DrillMatic Fpodpsukg Srsfx Aa Nog Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Index values: 3 4 6 8 12 Year of manufacture: 2015 Weight: 66 kg Table size: 400x620mm

Condition: used, Year of construction: 2012, Motor: 0.75 kW Technical data: see illustration. Fodpfx Aoxcty Tsa Njpg

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW Fjdpsxbgfmefx Aa Nopg For technical data, see illustration.

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW Fpodpfx Aasxbgfgo Nog For technical data, see illustration.

Condition: good (used), Indexing table HAU RK 6-1200, 6 work piece spindles and 4 polishing units type PES, 11 kW each, max. width polishing wheel 300 mm, incl. oscilation, electr. driven hight adjustment, liquide compound feeding system (spray guns + pressure tank, control cabinet Fpedpfx Ae R Ecgoa Nog Price and additional information on request.

Year of construction: 2000, condition: ready for operation (used), Two custom made but expandable and convertible rotary indexing tables for the soldering process are available: 1) Load capacity: approx. 10kg-15kg, mounting points: 4, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2000mm, weight: approx. 500kg, year of manufacture: approx. 2000. The battery is empty. An on site inspection is possible. Fpsdsx R Dtpopfx Aa Nsg

Condition: ready for operation (used), Year of construction: 2021, Two almost identical rotary indexing tables are available, 1x TT315-04-270-RH-20-3 KA57 DRN100L4-M2A and 1x TT315-04-270-RH-20-1 KA57 DRN100L4-M5B, diameter output flange: 360mm, overall height (screw-on surface output flange) 243.5, center diameter: 90mm, max. recommended mounting plate size Ø: 2800mm, weight of output flange: 193kg, load on output flange axial force: 32kN, radial force: 17kNm, tilting moment: 5kNm. mounting plate size Ø: 2800mm, rotary table weight: 193kg, load output flange axial force: 32kN, radial force: 17kN, tilting moment: 5kNm, load center column axial force: 28kN, tilting moment: 4kNm, accuracies partial accuracy: ±22mm, axial runout at output flange: ±0.01mm, radial runout at output flange: ±0.01mm. With documentation, on-site inspection is possible. Fedpfx Aswaa H Rsa Njpg

Condition: used, Year of construction: 2001, functionality: fully functional, NC rotary table Fibro 10.36.8 with face gear, year 2001 well maintained, very good condition, little used Pitch 120 teeth +/- 1" With hydraulic locking via face gearing, table top does not lift off Rotary table height 380 mm with substructure height 245 mm (total height 625 mm) Table size Ø 1180 mm Top table plate Ø 1300 mm, Table load approx. 5000 kg Table surface smooth, with dirt grooves with Siemens servo drive 1FT6105-8WF71-4EG2 and bevel gearbox Table speed max. 20 rpm with bevel gearboxes itot = 72 Tangential torque with motor operation 7200 Nm Total weight 3.800 kg without fixators, without installation and commissioning Fpsdpfx Aasyg N Hro Nog

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Manufacturer: Hau Fpjdpfxoh Ug Ule Aa Nog Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, control cabinet

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Fedpfx Ajqmfv Sja Nopg Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, 5.5 kW motors, gripper clamping system, switch cabinet

Condition: good (used), Table size:1500x1500mm Capacity : 6t Fpodpfxsfvqmxs Aa Nog Dimension: 1600x2500x2000mm Hydraulic

Condition: ready for operation (used), Positioning table, welding rotator, rotary work table, Used machine Manufacturer: Weiss GMBH Type: TC 700 T Overall dimensions: Width: 870 mm Fsdow Havfjpfx Aa Njpg Depth: 900 mm Height: 820 mm Weight: 871 kg Electrical specifications: 400V; 6.8A; 3.4 kW Table diameter: 700 mm

Condition: new, table diameter 715 mm table load 500 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1 UpM Fpodpfxjyv Nxzs Aa Nog T-slots 6 x M16 Tilt Angle 90-180-110 ° Tilting Speed 30 sn min./90° weight of the machine ca. 675 kg

Condition: new, table diameter 900 mm table load 1.000 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1,1 UpM T-slots 6 x M16 Tilt Angle 90-180-105 ° Tilting Speed 30 sn min./90° Fpjdoyv I Rispfx Aa Nsg dimensions 2100x920x1100 mm weight of the machine ca. 930 kg

Condition: like new (used), Kitagawa MR200 rotary table Fjdpfx Aoy H Ewnea Njpg Condition: new, unused The table has been kept in storage and not used