Used Rotary Evaporator for sale (3,951)

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : Redpfxexaac As Aazen - 1 control (integrated) - 1 wired remote control

Condition: new, table diameter 340 mm table load 290 horizontal kg Rjdpfx Aaexaafqjzjn table load capacity 190 vertikal kg turning speeds 0,6 - 6,0 U/min spindle bore 60,0 mm swivelling range 0 - 90 Grad weight of the machine ca. 62 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90 Grad turning speeds 0,2 - 2,0 U/min turning speeds 1,2 - 12,0 U/min bore 20,0 mm weight of the machine ca. 50 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch Rjdpfjxaatnjx Aazsn

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 30 mm, overall weight: 9,280 kg, ENGEL e-insert 310V/100 rotary, equipped with RD 1.600 rotary table and ENGEL easix articulated robot, as well as CC300 microcomputer for centralized control of the machine and robot. Standard mold installation specifications: minimum mold height 250 mm, opening stroke 350 mm, maximum platen distance 600 mm. Hydraulic drive option ECODRIVE - SHV2. Materials to be processed: POM 30–40% GF, Hostaform C9021. Rjdpfx Asyb Smkeazjn ENGEL e-insert: The vertical machine for specialized tasks requiring increased precision. This machine concept offers optimal conditions for overmolding or assembling pre-fabricated components (metal, glass, electronic modules, plastics), ensuring part retention in the mold and reducing cycle times. Included in the package: highest injection process precision due to the servo-electric injection unit, as well as outstanding energy efficiency from ENGEL ecodrive.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, rotary table diameter: 1,000 mm, grinding height: 500 mm, table diameter: 1,000 mm, CNC rotary table grinding machine with 1000 mm magnetic chuck, turret carrier with 3 grinding spindles (external, face, and internal grinding spindle). CNC control Sinumerik 840C, Simodrive 611 drives, coolant tank, currently still in operation, now being dismantled. Delivery also possible as overhauled and with new electrics upon agreement. Total weight 20,000 kg. Rsdpfxswv Sc Ao Aazon

Year of construction: 2026, condition: new, functionality: fully functional, ROTARY CUTTER RC250 The Rotary Cutter is built for fast, precise shredding in demanding kitchens and processing plants. From root vegetables to fruits, it turns raw produce into uniform filaments in seconds. A two-dimensional centrifugal cutting system keeps the thickness consistent, while the 304 stainless-steel Rjdjx Sdruspfx Aazsn The body ensures durability and hygiene. Separate drive and cutting chambers reduce contamination risk and ease maintenance.

Condition: ready for operation (used), Year of construction: 2002, A rotary table skin packaging machine Zappe is available. Packaging format X/Y: 400mm/500mm. An on-site inspection is possible. Rjdeyarqtjpfx Aazen

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW Rodpfox Hyfyox Aazsn

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm Rsdpsubbryefx Aazon - feed speed 6-34m/min - complete electrical cabinet + control panel Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel

Condition: excellent (used), Gericke model CSM722 Inline Centrifugal/Rotary Sifter. Stainless Steel. Rsdpfeyfhf Dsx Aazen

Condition: used, Year of construction: 2004, Compressor type: Oil-injected rotary screw compressor with integrated refrigerant dryer Motor power: 15 kW (20 HP) Power supply: 380 V / 50 Hz Operating pressure: 7.5 bar Free Air Delivery (FAD): 798 m³/h (approximately 13.3 m³/min) Redpfx Aewgca Tsazen Noise level: 68 dB(A) Tank capacity: 400 liters Dimensions (L × W × H): 1,000 × 660 × 1,400 mm Weight: 450 kg Cooling: Air-cooled Integrated dryer: Yes Control system: Elektronikon®

Condition: good (used), Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder from lathe Kern CD 480 -Type: BDG 6360-0-05-W031-1024-65// Rodegccucopfx Aazon -Price: complete -Dimensions: 100/90/80 mm -Weight: 4.3 kg

Condition: as good as new (ex-display), Falling-film evaporator – unused – The machine consists of three units that need to be connected in series: - Evaporator (58 pipes), Length: 12.000 mm - Condenser (19 pipes), Length: 15.000 mm - Condenser (48 pipes), Length: ca. 15.000 mm Rjdjd Hb Acepfx Aazjn All units are unused and made of stainless steel (AISI 304 / 1.4301). The evaporator was designed for the production of protein powder (dairy industry) and represents the final element of a drying chain. It evaporates the remaining water in the dryer and thus leads to a high concentration of the end product. Since the units have never been in use, they are in excellent quality. Sale without electrical components or control panel.

Condition: good (used), 1 x PA 182 Rotary Traysealer Redpeydnimsfx Aazen Located in Melksham, Wiltshire

Condition: new, Screw compressor AGRE Model Sonetteo 7,5+ 10 Screw compressor compact unit incl. refrigerant dryer and DL tank 270 lt. Belt driven. Space saving. Inexpensive. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Mounted refrigeration dryer. Rjdshun Tzjpfx Aazsn Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Infologic² Basic control unit Refrigerant dryer: Mounted, refrigerant R513A Tank: 270 lt. horizontal painted 11 bar Motor power: 5,5 kW Pressure: 10 bar Delivery rate: 780 lt./min incl. time controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: new, AGRE ALUP ALLEGRO 14+ 13 270 Speed controlled. Space-saving. Inexpensive. Rsdpfx Aaoixt I Hszjn Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Convincing compressed air quality. Cyclone separator and refrigeration dryer built in. Equipment in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High frequency motor, with 1:1 direct drive Control: Speed controlled with frequency converter Control: Graphic control C55DD Refrigerant dryer: Integrated, refrigerant R513A Filtration: incl. cyclone separator Container: horizontal, painted Performance data: Volume flow at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 16.2 kW Rated power motor 15 kW Oil quantity 5.2 lt Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm weight 400 kg Compressed air outlet G 3/4'' Capacity compressed air tank 270 lt

Condition: new, AGRE ALUP SCK 10-10 270+ Belt driven. Space saving. Inexpensive. Easy operation. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Built-in refrigerant dryer. Sound-insulated screw compressor with V-belt drive on compressed air receiver 270 l with built-in refrigeration dryer, integrated cyclone separator, with electronic condensate drain and C55 graphic control. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air cooled Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Aircontrol 5.0 Refrigerant dryer: attached, refrigerant R513A Filtration: incl. cyclone separator Tank: horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min operating pressure min. / max. 5,5 / 10,0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated power motor; IP55 7.5 kW Oil quantity 4 lt Dimensions and weight: L x W x H = 1530 x 662 x 1531mm weight: 310 kg Compressed air outlet: G 1/2'' Rjdpoixt H Nsfx Aazjn Compressed air tank capacity: 270 lt

Year of construction: 2015, condition: used, functionality: fully functional, We are offering this used UNIBLOC Type 551 rotary lobe pump in stainless steel, year of manufacture 2015. Manufacturer: BOCKW Type: CB 3-132 M/4 D Serial number: 523.753.2/11 Rated power: 7.5 kW Rated frequency: 50 Hz Rated voltage (Delta): 400 ± 5 V Rated voltage (Star): 690 ± 5 V Rated current: 15.5 / 9.0 A Power factor cos φ: 0.80 Speed: 233 min⁻¹ Protection class: IP 56 Weight: 98 kg Year of manufacture: 03/15 Standard: IEC 60034 UNIBLOC rotary lobe pump in stainless steel for food applications. The transfer pump was previously installed in a tanker truck. Also ideal for viscous products as well as water, wine, soft drinks, beer, sparkling wine, milk, etc. Type 551, 7.5 kW electric motor with frequency control attached. 233 RPM. Operating manual included. The pump has been cleaned and is ready for immediate use. If you have any questions or require further information, please feel free to send us a message or call us. Rodjx Tq E Dspfx Aazen

Condition: good (used), Year of construction: 1990, Lumsden 92ML Rotary Surface Grinder 48" Magnetic Chuck Year 1990 - Latest ones made Segmental wheel diameter - 711mm / 28" Segments per set - 12 Table diameter and grinding capacity - 1219mm / 48" Max height of wheel to table - 572mm / 22.5" Min height of wheel to table - 114mm / 4.5" Max height of wheel to magnetic table - 457mm / 18" Spindle speed 550rpm Table speeds - 18 & 6 rpm Automatic feed 10 rates - 0.1 - 1.0mm/min (0.004 - 0.040 ins/min) Power elevation - 635mm/min (25ins/min) Spindle motor - 50-75hp at 960rpm Table motor - 6 /.5hp at 1440/480rpm Feed motor - 0.25hp at 1440rpm Elevation motor - 1hp at 720rpm Coolant pump motor - 1hp at 1440rpm Overall height of machine - 3048mm Floor space 4394 x 3353mm Rsdovwc I Hopfx Aazon Weight approx 12,200kgs / 12ton

Condition: good (used), 60" Table Complete with coolant tank and sizing Specification - Segmental wheel diameter - 864mm / 34" Segments per set - 16 Table diameter and grinding capacity - 1524mm / 60" Magnetic Table diameter - 1524mm / 60" Max. height of wheel to table - 272mm / 22.5" Min. height of wheel to table - 114mm / 4.5" Spindle speed - 450rpm Table speeds - 16 &5.5rpm Automatic feed 10 rates - 0.1-1.0mm/min (0.004-0.040ins/min) Power elevation - 635mm/min (25ins/min) Spindle motor - 60-100h.p at 960rpm Table motor - 6/2.5h.p at 1440/480rpm Feed motor - 1/4h.p at 1440rpm Rsdpfx Aouzlnzjazon Elevation motor - 1hp at 720rpm Coolant pump motor - 1hp at 1440rpm Overall height of machine - 3073mm/ 10.1" Floor space - 4394mm/14.5" x 3607mm / 11.10" Approx weight - 16700kgs

Year of construction: 1988, condition: used, Eubama S5 Rotary Transfer Machine Serial Number 5531 Rsdpfodg Da Isx Aazsn Year 1988 Pristine Condition Not been used for 15 years

Condition: used, Year of construction: 2003, Manufacturer: IMA Kilian Model : E150 plus Version : 26-EU-B Year: 2003 Number of stations: 26 Die type: B Punch type: EU-B / IPT-B Punch configuration : Rsdpfx Asx R A Ulsazsn die diameter: 30.16 mm height of dies: 22.22 mm max tablet diameter: 16 mm max filling: 15 mm max main compression: 80 kN max precompression: 23 kN Production rate: 7,800 – 160,000 tablets / h Technical documentation available Weight: 1500kg  

Condition: used, Manufacturer: Winkworth Model: CT 213 Type : Rotary mixer for drums Maximum product size : Ø 40 x 55 cm Product fixing : Manual Speed variation : Mechanical Mixing speed : 18 – 105 rpm Timer Mode: manual / automatic Materials: Stainless steel Rjdpox R A N Aefx Aazjn Tuscan motor 0.37 kW – ATEX Class EExd II B T4

Condition: used, Manufacturer : DMN Model : BL 200/1 Type : Rotary valve External diameter : 345 mm Nominal diameter : 205 mm Leroy Somer motor : 0,75 KW Atex class : EX II 20 Rsdpex R Axwefx Aazjn Tightness : Air purge

Condition: used, Year of construction: 1999, GEA Courtoy R 090/18 rotary tablet press with electrical cabinet R090XT13 Number of positions / stations: 18 Punch type: EU D Max. compression force: 100 kN Max. precompression force: 10 kN Production speed: 15,900 – 79,200 tablets / hour. Ø Max. tablet diameter: 25 mm Rodpfx Aajx R Amhezjn Outer diameter of dies: 56 mm Die height: 23.81 mm Ø Punch body diameter: 25.35 mm Height of the press: 1955 mm Net weight: 1800 Kg Full technical file. Feeding device / Loading hopper / Discharge chute / Allen Bradley control system. Small size. Equipment in excellent condition and low operating hours.