Used Rotary Trimmer for sale (3,903)

Condition: good (used), Rotary actuator for air flaps, air flap rotary actuator -Hollow shaft mounting: approx. Ø 32 mm -24 VAC -Protection class: IP 54 Nsdpfxeb A H N Rs Aanolk -20 Nm 90° Price: per piece Quantity: 1 available -Weight: 1.8 kg

Condition: reconditioned (used), Year of construction: 1989, functionality: fully functional, volume flow: 12.6 m³/h, overall weight: 200 kg, total length: 1,250 mm, total width: 415 mm, total height: 450 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 25 rpm, rotational speed (min.): 20 rpm, torque: 390 Nm, 2 pieces of unused rotary valve dosing sluices. Both sluices have been completely overhauled. New bearings and seals have been installed. Nodpfjx N A N Tsx Aanjlk ! Price per item ! Manufacturer: Kreisel Industries GmbH Type: ZS315-1 Size inlet / outlet: 300 x 300 mm Housing material: cast iron / Rotor: welded steel sheet Overall height: 450 mm Number of cells: 7 Cell dimensions: length 300 mm / width 100 mm / height 40 mm Weight: 200 kg per piece The geared motors are also unused old stock. Manufacturer: Thurm DDR Year of manufacture: 1990 Function tested! Bearings can be relubricated from both sides externally. Sluice 1 Drive power: 0.75 kW Speed: 20 rpm Theoretical delivery rate: 10 m³/hour Sluice 2 Drive power: 1.1 kW Speed: 25 rpm Theoretical delivery rate: 12.6 m³/hour

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2500x2100x1800 mm Weight 1700 kg Total power requirement 7,5 kw Nlodjv A E Sfepfx Aansk

Condition: good (used), functionality: fully functional, rotary table diameter: 650 mm, table diameter: 650 mm, Glauchau Horizontal Spindle Ring Grinder Njdexxyvmjpfx Aanjlk With 650mm dia. Magnetic Chuck

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 5603, year of last overhaul: 1987, input voltage: 380 V, total length: 33,000 mm, total width: 2,894 mm, total height: 2,300 mm, conveyor belt width: 2,000 mm, input current: 1,000 A, input frequency: 50 Hz, Rotary oven, manufactured in 1977, refurbished in 1987. Taken out of operation due to redundancy. Njdjx Itv Ijpfx Aanelk

Condition: used, Year of construction: 1997, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 76, workpiece weight (max.): 20 kg, power: 70 kW (95.17 HP), total length: 6,000 mm, total width: 3,500 mm, total height: 2,300 mm, input voltage: 400 V, air pressure: 6 bar, suction capacity: 12,000 m³/h, 1) Camam machine 1997y - 2x inside x 2x outside moulder (11kW motor) - 2x inside x 2x outside paper sanding (5kW motor) total power 74 kW 2) Camam machine 2002y - 2x inside x 2x outside moulder (11kW motor) Nledpfxov Unhge Aanek - 1x inside x 1x outside paper sanding (5kW motor) total power 60kW Machine suitable for bended elements (ex backrests), narrow longitudinal elements (legs), pieces height 120 mm, depth 65mm, rotation speed 8m/min

Condition: good (used), Rotary actuator for air flaps, air flap rotary actuator -Hollow shaft mount: Ø 32 mm Nljdpsb A R Szefx Aanjk -230 VAC -Protection class: IP 54 -20 Nm 90° -Weight: 1.7 kg

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Nledpfx Aasw R Syijnek

Condition: excellent (used), Year of construction: 2009, Ref:11043 . 2009 Horizon HT-30 Trimmer Excellent condition - Only 2.2m cuts! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Comprising; HT-30 Trimmer with stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Including A & B top plates, spare knives & tools. Nodpfjx Nfnlsx Aanelk Specification: Book Size, Max: 300 x 300 mm Min: 100 x 142 mm Pile capacity : 2 -- 51 mm Mechanical speed, Max: 200 cycles/hr. Production example, 1,000 books/hr. with 5 x 10 mm books in pile. Voltage frequency: 3-Ph, 200/220/400V, 50/60Hz.

Condition: ready for operation (used), Year of construction: 2013, Injection Unit Nledsx D H Awopfx Aanok Injection pressure 1703 bar, 1297 bar, 1030 bar Screw speed 400 r/min, 320 r/min (current) Nozzle pressure 51.9 kN Screw diameter 25 mm Clamping Unit Opening stroke 458 mm Ejector stroke 100 mm Ejector force for / back 39.8 kN Clamping force 800 kN This Engel Insert 200V/60 rotary was manufactured in 2013. A vertical injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Engel Insert 200V/60 rotary vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, functionality: unexamined, total height: 230 mm, overall weight: 1,000 kg, total width: 900 mm, total length: 1,070 mm, type of input current: AC, input voltage: 220 V, - Used optical rotary table, diameter 800 mm - Manufacturer: Carl Zeiss Jena DDR - T-slot width: 18 mm Nledpox Nd Rlofx Aanek - Optical display in degrees, minutes, and seconds - Sale exclusively to commercial customers, with any warranty excluded

Condition: excellent (used), operating hours: 1,500 h, - rotary shear type MEWA UC 201 Njdpfox E Tz Sjx Aanelk - Electric drive 2 x 75 kW - Rotor length approx. 2 meter - width of the knives 70 mm - with chain conveyor for the outlet of the product It is a very powerful machine for shredding materials as tires or light scrap.

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Manual switch -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg Nedpfxjcp Nvyo Aanjlk

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Nlsdpfsw R St Nex Aanjk

Year of construction: 2025, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. Nledox Exiuopfx Aanok With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2008, condition: ready for operation (used), Technical data: 3x Heidelberg carbide trimmer blade set Nedpfx Aajhbnl Nenjlk

Year of construction: 2011, condition: used, functionality: unexamined, For sale: rotary – centrifugal screener. The screener was used in a pellet production line with a throughput of approx. 8 t/h. Manufacturer: AFAU, Name: TAMIZADOR, Model: TR-20, Year of manufacture: 2011, Nlsdpfxewyc Hae Aansk Machine outer diameter: 1550 mm Screen diameter: approx. 1350 mm, Overall height: 680 mm Rated motor power: 1.5 kW The screener has been dismantled and is ready for transport. Contact me for more photos and details. Machines can be inspected in Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: used, Ball-turning and radius-turning device KRETZ Ball and radius turning device Nledpfxox A Imne Aansk Manufacturing No.: A1.13.355 Year of construction: presumably 1990 Ball diameter: Ø 5 to Ø 125 mm Rotational movement via handwheel with gear transmission to drive shaft - Fine adjustment via knurled handwheel with scale - Coarse adjustment of guide rod (Ø 20 mm) in clamping block - HSS turning tool Ø 6 mm - Clamping attachment (height 17.5 mm) for securing in tool holder Weight: 3.3 kg in good condition

Condition: used, Year of construction: 2004, Three knife trimmer Kolbus HD 142.P Year 2004 Description: - Co-Pilot with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Exchangeable cutting tables (standard set) Nledownbv Aspfx Aanek - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Kolbus: HD 142.P Maximum size (cutted): 305 x 420 x 80 mm (WxHxT) Minimum size (cutted): 100 x 100 x 2 mm (WxHxT) Maximum size (uncutted): 310 x 430 x 80 mm (WxHxT) Maximum pile height: 80 mm Max. mechanical speed: 3.900 cuts/h Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Year of construction: 1991, For sale a screening bucket of the renowned Van Dalfsen brand, model HPL 2000 SP20. Specification: • Type: Screening bucket (rotary) • Model: HPL 2000 SP20 Nlodpfx Aswpl Rmjanek • Drive: hydraulic • Working width: approx. • Technical condition: good, functional • Ideal for screening soil, compost, rubble, stones, etc. - Solid construction, ready to work - Suitable for excavators, loaders.

Condition: used, Turntable, welding rotator, Bettinelli TR 210, Used machine Manufacturer: Bettinelli s.p.a. Italy Nedpfxjxxk H As Aanslk Type: TR 210 Overall dimensions: Width: 950 mm Depth: 950 mm Height: 830 mm Electrical data: 400V; 1.1 kW; 5.9A; 900 rpm Table diameter: 950 mm

Condition: used, Technical details: table load: 3 t Nodpsxz E Exsfx Aanslk table diameter: 1280 mm table rotating: 0-180 Grad table - inclinable: nein / no Grad machine weight approx.: 1,376 kg dimensions LxWxH: 1,4 x 1,7 x 0,18 m positioning rotary table Load capacity tested up to 3 tons. Currently operates in 2 positions at 180 degrees. Can be modified up to a maximum of 270°. *

Condition: used, Three Knife Trimmer with automatic infeed belt for Inline or Offline production Dreimesserautomat / Three Knife Trimmer Wohlenberg 44 FM 50 Baujahr / Year 1988 - Serial-No. 3296-013 Format / Size max.  315 x 440mm  Thicknes max. 100mm Speed max. 3000 cycles per hour Nljdpfjxz Tkiex Aanok Automatischer Einlauf / Specification automatic feeding Bandauslage / Belt delivery Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2009, condition: used, Manufacturer: TERRA SELECT Model: T4 Engine: PERKINS 60 kW (80 hp) Transport Measurement: L. 9,500 mm x W. 2,550 mm x H. 3,950 mm Operational Meas: L. 11,800 mm x W. 6,800 mm x H. 3,300 mm Year: 2009 Hourly Production: 70 m³/h Screening: DRUM L. 4,200 mm x D. 1,600 mm Hopper Capacity: 3.40 m³ Njdpfsunx R Iex Aanolk Discharge belts: L. 3,400 mm x L. 800 mm Tank: 160 L Weight: 10,200 kg

Year of construction: 1962, condition: ready for operation (used), A heavy-duty rotary table is offered that was completely overhauled in 2024. Control cabinet: new, motors/components: new, table size X/Y: 3200mm/3200mm, max. table load: 40000kg. Travel distance table slide: 1750mm. Control: Siemens, measuring systems: Heidenhain, control cabinet in transport fixture, regularly maintained, documentation: original plans, wiring diagrams 2024, terminal plan, operating manual, machine weight: approx. 30000kg. Inspection is possible by arrangement. Nedpfxjx I Rrae Aanslk