Used Round Cylinder for sale (11,395)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Predjwwt Ddjpfx Abpea Manufacturer: FACCIN, Model 4 EDL 1617 Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Working width: 1500 mm Top roller diameter: 175 mm Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens PLC control system Electric drive for top roller for increased efficiency Safety trip wire with emergency stop and CE certification Centralized lubrication Cone bending device Optional Equipment Included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, TECHNICAL SPECIFICATIONS: Number of rolls FOUR Geometry linear guides Maximum plate width mm 3000 Top roll diameter mm 390 Bottom roll diameter mm 370 Side rolls diameter mm 295 Installed power HP 40 Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control Podpfxegd T R Do Abpjra • Cone bending device with electronic tilting

Condition: used, The used adjustable rounding cutter from Leitz is a cutting tool for professional woodworking. It is suitable for creating and machining rounded profiles on the top and bottom of wooden workpieces. The adjustable design supports flexible routing tasks in various applications. Technical data: - Blades: Z4 - Cutting circle (ø): 155.5 mm Pjdpfxszr I Tms Abpsra - Bore: 40 mm - Marking: MEC - Length: 2 x 35 mm - Material: Steel, aluminium

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Pjdpjwzzivsfx Abpsra Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: used, Technical data: - Cutter: HW - Cutting diameter (ø): 157 mm - Bore: 35 mm - Length: 30 mm Podszryh Ajpfx Abpsra - Material: Steel

Condition: used, Second-hand SAD-30/100 pneumatic cylinders Predpfx Aezrxpfjbpsa

Condition: used, Pneumatic cylinder FESTO DNU-40-125-PPV-A 14137 Prjdpfx Abezrxnbjpoa

Condition: used, Technical data: Podjzrxm Depfx Abpjra - Piston diameter: 50 mm - Stroke: 100 mm

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, Equipment: CE marking, documentation/manual, - Year of manufacture: 2020 - Made in Bulgaria - DTR, CE TECHNICAL SPECIFICATIONS: – Height of workpieces: 8-45 mm – Minimum length of workpiece: 100 mm – Minimum width of workpiece: 100 mm – Edge thickness: 0.4-3.0 mm – Feed rate: 9.5 m/min – Cutting unit - motor power: 1 x 0.27 kW – Milling unit: 2 x 0.35 kW – Milling unit: 12,000 rpm – Corner rounding unit - minimum length of workpieces: 250 mm Prjdpfxow H Ryuj Abpea – Corner rounding unit - motor power: 1 x 0.35 kW – Corner rounding unit: 12,000 rpm – Pre-milling unit: 1x 1.1; 1 x 0.75 kW – Pre-milling unit: 12,000 rpm – Edge trimming unit: – Glue removal unit: – Polishing unit - motor power: 2x0.18 kW – Polishing unit: 2800 rpm – Extendable support with rollers: – Diameter of dust extraction nozzles: 120 mm – Compressed air pressure: 6.5 bar – Total power: 6.7 kW – Dimensions - L x W x H: 4130x1220x1470 mm – Weight: 1180 kg

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW For technical data, see illustration. Prjdpfx Aboxbgg Repsa

Condition: used, Year of construction: 2012, Motor: 0.75 kW Technical data: see illustration. Prodpsxctw Sefx Abpja

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston Ø: approx. 80 mm -Piston rod: Ø 32 mm -Stroke: 148 mm Predpsd Erv Hofx Abpja -Piston rod mounting: Ø 43 mm -Cylinder mounting: Ø 30 mm -Quantity: 2 available -Price: per piece -Dimensions: 600/135/H135 mm -Weight: 13 kg

Condition: good (used), Year of construction: 2021, Lifting strap, lifting belt, crane strap, lifting sling, round sling, double woven hose -Manufacturer: SHZ, Round sling with double jacket | EN 1492-2 -Type/Loading capacity: WLL 10,000 kg SF 7 -Length: 3.0 m Prsdjzrl Iujpfx Abpoa -Circumference: 6.00 m -Quantity: 7x round slings available -Price: per piece -Transport dimensions: Ø 500 x 100 mm -Weight: 5.6 kg/pc.

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. YAMA S15 HAPPY – Compact Crawler Excavator for Professional Applications The modern YAMA S15 HAPPY mini excavator is engineered to meet the highest standards. It is the ideal choice for professional users in the construction industry, electrical and plumbing installations, renovation companies, as well as service providers in related fields. The model is equipped with a swing boom, significantly facilitating work in confined areas—making it ideal for precise operations in hard-to-reach locations. The mini excavators are manufactured under the supervision of European technicians and according to European standards. The robust design and high-quality components ensure reliable operation even under demanding conditions. TECHNICAL DATA: Operating weight: 1,500 kg Bucket capacity (standard): 0.03 m³ Engine: Laidong, 3-cylinder diesel Engine output: 18.4 kW / 25 HP Cooling: Equipped with oil cooler Fuel tank: 15 liters Maximum climbing ability: 35° Hydraulic system: Gear pump Hydraulic pressure: 16 MPa Hydraulic flow: 25 l/min Travel speed: up to 2 km/h Platform swing speed: 9–10 rpm Digging force: 13 kN Ground pressure: 30 kPa DIMENSIONS: Overall length: 2,550 mm Overall width: 1,100 mm Overall height: 2,170 mm Ground clearance: 380 mm Track width: 230 mm Track gauge: 920 mm Total track length: 1,300 mm Bucket width (standard): 380 mm Dozer blade: – Width: 1,160 mm – Height: 210 mm – Maximum lift height: 325 mm – Maximum lowering depth: 175 mm WORKING RANGE: Maximum digging depth: 1,800 mm Maximum vertical digging depth: 1,320 mm Maximum reach: 2,400 mm Reach at ground level: 3,227 mm Maximum dumping height: 1,750 mm Maximum digging height: 2,740 mm Minimum swing radius: 1,550 mm PRICE: Pjdpfxoyk Txgo Abpsra Net: €10,400 Gross: €12,376

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, - Capacity 1050 x 3 mm - Roller diameter 90 mm - Conical bending - Swing-out upper roller Podjq H D S Rjpfx Abpsra - Brake motor - Foot control - Emergency stop - Documentation - 400 V

Year of construction: 2006, condition: used, manufacture IEMCA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale. Podpszqgikjfx Abpera

Condition: good (used), HYDRAULIC CYLINDERS 7.26m STROKE (2PIECES) Predpfx Abodkq Ewepea AND BIG VARIATE OF OTHER HYDRAULIC CYLINDERS

Condition: new, Two cabinets with 12 drawers: ejectors – round and flat. Price per item only €10. Prsdpfjxz Rx Dox Abpoa

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 19115035, type of input current: three-phase, The cylindrical milling machine can be used to produce finished diameters ranging from 40 to 160 mm. The four cutter heads are continuously adjustable and each carries a finishing cutter and a roughing cutter. The drive motor for the cutter head has a power output of 30 kW, and the feed motor has a power output of 3 kW. Pedpfxjzlhame Abpsra

Condition: good (used), functionality: fully functional, Sturdy, mobile roundwood and timber cross conveyor. Predpfx Aszum Uuebpea Equipped with 5 chain strands. Electric drive for mobility. Track width 1.60 m.

Year of construction: 2000, condition: ready for operation (used), A hydraulic 4-roll plate rolling machine Promau (Prümau) is available. Working width: 3000mm, bending capacity: 13mm, pre-bending capacity: 10mm, rolls: 4. An on-site inspection is possible. Prodpfszhw Tuex Abpea

Year of construction: 2011, condition: ready for operation (used), An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible. Psdpfjydd Acox Abpsra

Condition: new, Year of construction: 2026, roller diameter: 140 mm, roller length: 1,570 mm, Equipment: cone bending device, hardened rollers, swiveling upper roller, - Capacity: 1570 x 4.5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamping) - Hardened rollers Pedogg Nv Iepfx Abpera - Tapered rollers - Brake motor - Emergency stop - Documentation - 400V

Condition: used, In einem sehr guten Zustand, Letter Press Cylinder DIE Cutter Heidelberg S in good working condition. Stanzzylinder / Automatic DIE-Cutter Cylinder Heidelberg S Serial-No. 13934 Size max. 540 x 720mm Speed min. max. 4.000 sph Punching pressure: 60T Pjdszna S Hspfx Abpsra Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, PRICE REDUCED AGAIN!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. This would certainly be of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer, which is a newer, smaller-form-factor HP model. Max. diameter: 350mm Max. test piece height: 500mm (higher measurements are possible, up to a maximum of 1000mm when measured in two halves...) Self-centering of the workpiece: +/- 5mm Max. weight of test piece: 40 kg The system has been used very little and has had only two owners. The first owner, from whom I purchased it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password...). Prjdpozcqy Esfx Abpsa Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. There is also a sample/sample lens (hemisphere) for calibration! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets using a freight carrier. It is already securely fastened to the pallets. The Talyrond 265 and the desk will be well-protected with bubble wrap, etc., and secured with stretch film for transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide excellent service for many years to come!!