Used Sandblast for sale (332)

Condition: used, maximum load weight: 13,330 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, loading space length: 6,150 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, Year of construction: 2026, Equipment: ABS, - 2 steerable axle sets ECO/low-maintenance with disc brakes, each with a load capacity of 9,000 kg - Dual-circuit EBS pneumatic braking system according to EC guidelines, with ALB control and parking brake as a spring-loaded accumulator, automatic linkage adjusters. Duomatic brake connection - Air suspension with raising and lowering function - Chassis: Stable welded construction made of high-strength fine-grained steel sheets, formed and welded to prevent twisting. The longitudinal and transverse beams form a single plane with the main frame. - Tires: 4 x 385/55 R22.5 on steel rims - Fixed drawbar with DIN towing eye 40 mm (length-adjustable drawbar) - Electrical system: According to StVZO guidelines, in a protected installation, 5-chamber tail lights integrated into the underrun protection, Euro plug, 15-pin socket, 2 red position lights above the rear portal. ABS with connection cable. 1 marker light mounted on each side of the rear frame. - Floor: Made of 24 mm thick vehicle construction panels, film-coated underneath to prevent moisture penetration, with a non-slip screen-printed texture on top, laid flat and sealed around the edges. - Front wall: Made of special vehicle construction plastic panels, closed up to the roof, with a central strut laid flat. Without a front wall cover at the top front. - Side walls: ZIKUN flap swivel mechanism, continuous sideboard, horizontally divided. By folding down the lower sideboard, the upper wall is mechanically swung onto the roof. The lever kinematics, supported by a spring pull, is attached to the front wall. Sideboard upper parts made of special aluminum composite panels, 25 mm. - Fixed roof consisting of steel stringers with permanently glued aluminum sheets, powder-coated in white RAL9010 on the outside - Steel impact rail welded on both sides as a forklift protection. Rubber impact buffer mounted at the rear under the rear door - PVC quarter fenders on the axles - 1 set of mud flaps for the fenders - 2 wheel chocks with holder - Lateral underrun protection, galvanized and foldable brackets, aluminum planks with rounded end pieces Dcedpfx Aozp Ak Uoigok - Continuous splash guard under the underrun protection at the rear - Complete body sandblasted, primed and painted in a single color - Chassis: MAN graphite black - Outer frame and body: RAL 9010 pure white - Inspection 60001-0002 TÜV approval trailer/semi-trailer - Drawbar fork length-adjustable - Central lubrication strip for slewing ring and drawbar - 2-leaf rear door made of aluminum sandwich panels with internal rotating bar locks. The doors have a smooth surface - Clad the front wall in the lower area with a 280 mm high aluminum profile as impact protection. - 2 x retractable access steps in the lower part of the folding wall on the left and right, approx. 600 mm long - Integrated cargo securing system with CRS system (4 rows) in the roof and floor, including 4 load securing bars with 6 horizontal spring telescopic rods (CRS system Ancra-Jungfalk, Dekra tested according to VDI 2700 Code XL) - Interior light as an LED spotlight, switched via parking lights, with a separate switch - Additional interior lighting as an LED spotlight mounted at the rear - 2 x pallet stopper on the left and right - Tire pressure monitoring system according to ECE R 141 - Additional camera on the trailer for rear view video system, camera at the rear above the rear door

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. Dsdpfx Aiey Urtfogock The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 17/2022, A shot blasting chamber (shot blasting booth, sandblasting booth) is a specialized, enclosed space designed for cleaning and modifying the surfaces of large-sized components and steel structures. It enables the removal of rust, paint, and scale using a pressurized abrasive jet. Dsdszlrwvjpfx Aigeck

Condition: good (used), Year of construction: 2017, suction capacity: 16,600 m³/h, negative pressure: 5,600 Pa, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Dcedpottah Uefx Aigjk Model: DFO4-24 Year of production - 2017 Cartridge filter cartridges, oval - DFO ULTRA-WEB FR - 24 pieces Filtration area of 430 m2 45 Kw fan. Fan model : ART 631 N4T Built-in frequency converter and RITTAL SK 3305540 control cabinet air conditioner. Capacity 16600 m3/h Inlet diameter - 1 x 350mm , 2 x 300 mm Dust emptying cell sluice. Comes with a silencer and technical and electrical documentation. Also on offer on request new filter cartridges tailored according to the purpose of the device.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Dcjdpfx Asy U Auyeigsk Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. Dcedpjy U Autofx Aigsk • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: like new (used), “2 Pcs. Weserhütte EB 1.000 x 700 / 650mm” for Sale Manufacturer: Weserhütte Type: EB 1.000 x 700 / 650 Dcodpog I R R Asfx Aigjk Inlet size: 1.000 x 700 / 650mm Electrical Motor: Included See PDF-file below for more detailed information. Crusher is in good working condition. Crusher can be sandblasted and painted.

Condition: good (used), “Neyrtec / Neyrpic 820 x 640mm” for Sale Manufacturer: Neyrtec / Neyrpic Inlet size: 820 x 640mm Electrical Motor: Included Dodpfx Aohu Hpisigsck Crusher will be sandblasted and painted.

Condition: like new (used), Manufacturer: Krupp Type: 6 Djdpfx Ajg Sxrveigsck Inlet size: 1.000 x 630 mm Electrical Motor: Included See PDF-file below for more detailed information. Crusher is sandblasted and painted.

Condition: good (used), Power: 7,8 kW. Amperage: 52 A. Voltage: 150 V. 100% ED Magnet L x W: 1.780 x 1.380 mm. Conveyor belt: 1.400 mm. AA. : Ca. 2.800 mm. With transformer rectifier of 380V. primary. Dcjdpfxog Stwme Aigok Overband separator will be overhauled, sandblasted, painted.

Condition: like new (used), “Pallmann PS 4-7,5 F – Granulator / Roll Crusher” for Sale Find our complete stock on our website. Manufacturer: Pallmann Type: PS 4 – 7,5 F Mach. No.: 2264036 Dcsdpfxeglvv Uj Aigek Electrical Motor: 75 kW Included Included frame. Shredder will be overhauled, sandblasted and painted.

Condition: like new (used), Manufacturer: Löhnert / Berger Type: SKM 20 Electrical Motor: Included See PDF-file below for more detailed information. Will be sandblasted and painted. Dcedpfxjg Snrxj Aigek

Year of construction: 2012, condition: like new (used), “LuT LTP 1000/700 SK” for Sale Find our complete stock on our website Manufacturer: LuT Type: LTP 1000/700 SK Year of Manufacture: 2012 Rotor Dia. x W.: 1.000 x 700mm Included: – 55 kW Electrical Motor Dcsdpfxjglvxwo Aigek – Inlet – Hydraulic pump with control panel – 500 kg Service Crane Spare-parts in stock! Crusher can be sandblasted and painted.

Condition: good (used), Manufacturer: Aubema Type: 2508 Rotor Dia.: 800mm Rotor Width: 800mm Electrical Motor: Included Dsdpfxehu Hpbs Aigsck Will be overhauled, sandblasted and painted.

Condition: good (used), Manufacturer: Takraf / Zemag Roll Dia.: 1.250mm Dsdpfx Aisg Sntyogsck Roll Width: 2.000mm Electrical Motor: Included Will be overhauled, sandblasted and painted. See PDF-file below for more detailed information.

Condition: used, Manufacturer: Schauenburg Type: 1440 / 2 Mach. No.: 0914 Year of Manufacture: 1983 Decks: 2 Included: – 15 kW/6 Electrical Motor – Cardan shaft Dcsdpfx Aeh Nnh Asigjk – Springs Vibrating screen will be overhauled, sandblasted and painted.

Condition: good (used), Manufacturer: Främbs & Freudenberg Type: 2000-6000-2 Deck size 2.000 x 6.000 mm Number of decks: 2 Included: – Electrical Motor – Cardan Shaft – Springs Vibrating screen can be overhauled, sandblasted and painted. Dcodeg Snvbopfx Aigok

Year of construction: 2005, condition: like new (used), “ThyssenKrupp Turbo 2,2×4,0(5,2)DD“ for Sale Find our complete stock on our website. Manufacturer: Thyssen/Krupp Type: 2,2 x 4,0 (5,2) DD Size: 2.200 x 5.200 (4.000) mm Mach. No.: 2-485-20540 Year of Manufacture: 2005 Dodpfx Aoglvw Soigeck Decks: 2 Included: – 15kW/4 (950 RPM) Electrical Motor – Springs Vibrating screen can be sandblasted and painted.

Condition: like new (used), Manufacturer: Kleemann Type: VU1S 1240ST Size: 1.200 x 4.000mm Dcedpfx Aisg Sty Eegek Mach. No.: 38016201 Year of Manufacture: 1998 Deck: 1 (Ca. 80mm Deck opening) Included: – Electrical Motor – Springs Vibrating screen can be sandblasted and painted.

Condition: like new (used), Manufacturer: Ammann / Främbs & Freudenberg Size: 1.400 x 3.000 Included: – Electrical Motor – Cardan shaft Dcsdpeg Snutsfx Aigjk – Springs Elements. Vibrating screen is overhauled, sandblasted and painted.

Condition: good (used), Manufacturer: Stuckstette Size: 1.500 x 4.500mm Decks: 4 Frame: Not included Dcsdpfx Aeg Snudjigok Included: – Electrical Motor – Springs Vibrating screen will be overhauled, sandblasted and painted.

Condition: like new (used), Manufacturer: BOA Type: KS 1,5 x 2,5 x 1 Size: 1.500 mm x 2.500 mm Electrical Motor: 11 kW/6 Mach. No.: OR 327 Year of manufacture: 1990 Dcjdpfog Stwbox Aigek Springs included. Can be sandblasted and painted.

Condition: like new (used), Manufacturer: SKET Size: 1.600 x 5.500mm Decks: 2 Included: Dcsdpfxog Stunj Aigjk – Electrical Motor – Springs Vibrating screen will be overhauled, sandblasted and painted.

Condition: like new (used), Manufacturer: GFA Type: 1T Size: 1.800 x 4.000mm Mach. No.: ASS 3414 Year of Manufacture: 1998 Dcsdpfx Aeg Stuksigok Included: – 11kW/6 Electrical Motor – Cardan shaft – Springs Vibrating screen will be overhauled, sandblasted and painted.

Year of construction: 1994, condition: good (used), “Hein Lehmann Liwell Flip-Flow Vibrating Screen LF 3,0 – 8,82 / 28 ED” for Sale Manufacturer: Hein Lehmann Liwell Type: LF 3,0 – 8,82 / 28 ED Size: 3.000mm x 8.820mm Decks: 1 Year of Manufacture: 1994 Dcsdpfxeglvxhs Aigok Part of frame and conveyor included. Vibrating Screen will be overhauled, sandblasted and painted in color as requested.