Used Sandblast for sale (309)

Condition: refurbished (used), The system has been overhauled and is in very good condition. Is ready for immediate use. Has material discharge chute. Without filter system. Knsdei Dt Dyjpfx Aabsc Is under power. From location.

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 4,000 mm, inner dimension length: 6,000 mm, inner dimension height: 3,000 mm, filter area: 99 m², volume flow: 7 m³/h, Equipment: documentation/manual, lighting, Blasting house for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. Kjdpfx Asu A A Tkeabonc When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 3 h, functionality: fully functional, machine/vehicle number: Typ 375211, pressure: 10 bar, tank capacity: 45 l, operating pressure: 10 bar, overall weight: 25 kg, compressed air connection: 10 bar, Low-pressure jetting device 45 ltr boiler 1"/NEW immediately available! Infinitely variable from 0-10 bar Pneumatic quick shut-off Knedpfx Aeu U Uk Aoabsc HZ centrifugal separator Blasting hose large and small Wet blasting system large 19mm and small 13mm Etc. LOTS OF ACCESSORIES!!! Including sample blasting material (garnet sand, bicsrbonate, nutshells etc)

Condition: new, Year of construction: 2025, Desciption in english language after demand. Kjdpfjdulhvjx Aabenc

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, overall weight: 8,000 kg, inner dimension height: 600 mm, workpiece weight (max.): 20 kg, turntable diameter: 400 mm, The described shot blasting machine is designed for the automatic blasting or peening with selected media shots in accordance to the final finishing result to achieve. Kedpfewdgrzox Aabjnc Part to be blasted will be positioned on suitable pieces’ holders that minimized the shadowing of the contact areas parts/jigs. The parts are inserted and extracted by an automatic cycle into the blasting/peening zones, by means of a step-by-step conveyor that can also operate in continuous mode. The parts, after passing through a neutral zone, are blasted / peened in the subsequent zones, prior unloading the parts are also blown. The system is equipped with one (1) loading/unloading position to allow easier loading/unloading during the process cycle Once the piece has been loaded with operator or automation, the cycle starts and the conveyor process a step forward, allows the newly loaded piece to enter the cabin and the simultaneous arrival of an already processed part at the unloading station. The machine works with masked times, therefore all the positions of the satellites equipping the conveyor are occupied in the cycle time, when fully operational. In the inner positions of the cabin the satellites rotate, and the shooting guns jets the blasting/peening media with a correct impact angle as from appropiate design.

Condition: good (used), ROSLER TROWAL vibratory bowl feeder Type FM 165/46 Capacity 250 liters Inner bin 1650 x 460, depth 500 Knsdpewih S Hsfx Aaboc Speed variator New electrical cabinet Two 2.2 kW motors 525 operating hours Clear coating Visible in good working order

Condition: like new (used), Year of construction: 2022, operating hours: 5 h, Continuous injector blasting system for sweeping profiles and pipes with roller conveyor left and right Knedpewkd Tijfx Aabsc

Condition: new, Year of construction: 2025, Pressure blasting cabin with blasting carriage and turntable for components up to D= 900mm and a height of 400mm. Blasting agent recovery with cyclone separator. Extra sound-insulated and an inner lining made of rubber with fabric insert. High-quality machine for continuous use in trade and industry. Turntable with rotary drive D= 800mm for heavy components up to 800kg. Pneumatic lifting door. Filter system with pneumatic cartridge cleaning and airborne dust filter for air discharge into the building interior. Kodsd Sl Dbjpfx Aabenc Please contact us in writing or by telephone for questions regarding technical specifications etc.

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 90l / 450 kg Ksdpowrzbgefx Aabonc Degree of cleaning: SA-3.0 (deep and widespread corrosion) Air requirement: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Operating temperature: -20 - 100 °C Cleaning performance: up to 22 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 110 kg The compressed air blasting machines of the SBM series are mobile machines designed for advanced surface treatment with compressed air jets and abrasive media grains. The advantageous conical bottom design facilitates abrasive movement and, combined with the option to use various valve types, makes the abrasives suitable for processing all types of abrasives with spherical, round, and/or angular shapes and any grain size. The blasting units of the SBM series can achieve a surface quality up to class SA-3/SP5 and a capacity of up to 106 m2/h. SBM series sandblasters are equipped with large claw couplings, ensuring quick and safe connections while maintaining high compressed air throughput. The abrasive is loaded via a pneumatically operated rubber membrane - eliminating the need for inefficient screw connections - which makes the SBM series blasting units safer and easier to operate. The blasting device is also equipped with a large inspection valve that allows for quick tank emptying and the possibility of internal inspection. The SBM series blasting machines allow simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting device (in pneumatic or electric versions) is intuitive and precise, making it efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an additional option). The tank of the SBM blasting unit has been designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU, based on and under the supervision of a design approved by a notified body, and is CE-marked.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Knedpfjrq Hmzex Aabsc Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 2,400 mm, total height: 4,500 mm, total length: 3,800 mm, overall weight: 3,800 kg, inner dimension height: 600 mm, turntable diameter: 350 mm, Shotblasting machines with rotating satellites type PTR and SSR are designed to treat sensitive parts in singularly mode with any kind of shots. The nozzles are managed by a robot. The machine is equipped with a main indexed table that works as a pallet exchanger enabeling the entrance/exit of the parts into/out to the blasting chamber. The main table is equipped with 2 or 4 satellites; in accordance with production rate. One station is dedicated for loading/unloading, while another one (opposite to the loading area) is dedicated to the blasting/peening process. The nozzles are driven by a robot. The number of nozzles is defined according to the loading volume, the production rate and the geometry of the pieces. This machine is usefully for manual loading/unloading operation but it can be also equipped with an automatic handling device according to the process line request (2-axis gantry, robot…). Ventury system or Pressure type technology can be installed on such equipment. Installation of Magnetic Valves for shot flow check is also recomended. The machine can be equipped with up to three robots for peening. Ksdpfx Aewdgpgeabenc

Condition: excellent (used), functionality: fully functional, Satellite blasting system from Nicolis; 6 satellites with rotary motion; horizontal up/down motion with up to 6 nozzles, individually switchable; Maximum component size: height 320 mm, width 230 mm. System was used only for demonstration and testing purposes and is being sold due to disuse. Delivery/customs clearance available upon request. Knsdpfx Aaswbhb Sobjc Inspection and test run available upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, SY-ZP4A Rotary disc precision sand Knedjwcfvpspfx Aabec Dry blasting machine year 2024

Condition: like new (used), Year of construction: 2022, operating hours: 131 h, functionality: fully functional, air demand: 55 m³/h, compressed air connection: 8 bar, operating pressure: 6 bar, type of input current: three-phase, inner dimension width: 1,500 mm, inner dimension length: 1,600 mm, inner dimension height: 1,300 mm, input current: 16 A, input voltage: 380 V, Equipment: cabin, documentation/manual, lighting, MHG SMG 300 S Blasting System - Injector Color: RAL 7024 Graphite Gray - Intake silencer to minimize intake noise - Two lockable side doors, double-walled construction, soundproofed for noise reduction. - Viewing window, 320 x 500 mm, made of safety glass, installed in a quick-change frame, replaceable without special tools - LED lighting (can be switched off) - Blasting media recovery system type 255 - MHG filter cabinet type DUST-EX 1703 - Manually rotatable turntable (diameter 1,040 mm), load capacity up to 1,000 kg - Only 131 operating hours Knedpfx Aev Ux Spjabjc - Used with glass beads

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 60l / 300 kg Degree of cleanliness: SA-3.0 (deep and extensive corrosion) Air requirement: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Ksdpfxowrza No Aabonc Nominal operating pressure: 13 bar Operating temperature: -20 - 100 °C Cleaning performance: up to 19 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 65 kg The SBM series compressed air blasting machines are mobile devices designed for advanced surface treatment using a stream of compressed air and abrasive media. Thanks to the advantageous conical bottom design to facilitate abrasive movement and the possibility of using various valve types, the machine is suitable for processing all types of abrasives with spherical, rounded, and/or angular shapes and any grain size. The SBM series blasting systems can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, ensuring quick and secure connections while allowing high compressed air throughput. The abrasive loading is performed by a pneumatically operated rubber membrane—without the need for inefficient screw connections—which makes the SBM series blasting systems safer and easier to use. The blasting unit is also equipped with a large inspection valve that enables quick tank discharge and allows for internal inspection. The SBM series blasting units allow for simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting unit (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an optional extra). The SBM blasting unit container was designed and manufactured according to the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE marked.

Condition: used, Year of construction: 2012, machine/vehicle number: DHT 05-15-3.6-08-07,5, Machine no.: 181174 Manufacturer: AGTOS Type: Continuous overhead conveyor blast machine Designation: DHT 05-15-3.6-08-07,5 Turbines: 8 turbines with 7.5 kW Extraction air volume: 7500 m³/h Year of construction: 2012 Other details: Characteristics of the installed filter system Residual dust content with secondary filter: ≤ 2 mg/Nm³ Type: Dry dedusting system Characteristics of the blasting system Kedpfx Asrq Hd Ssabjnc Blasting media (material and size): Steel abrasive Abrasive quantity (initial filling): 5 tons Workpiece material: Steel Max. Workpiece length: 1400 mm Passage width: 500 mm Passage height: 1500 mm Sound pressure level without sound insulation: ≤ 85 dB(A

Condition: new, Year of construction: 2025, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 1,500 mm, total height: 1,000 mm, total length: 1,500 mm, type of input current: three-phase, suction capacity: 1,500 m³/h, turntable diameter: 1,200 mm, Equipment: cabin, Wet-blasting machines PP-UM are designed to manage an homogeneuos mixture of shot, air, water and as requested detergent. The final result is a soft blasting process on the surface (in comparison to a dry blasting process). The common media blasting shots are corundum, silicates and glass beads. A special pump (heavy duty design for aggressive liquids) allows to maintain homogeneously the solution and delivers the mixture to the blasting gun/guns. The compressed air guarantee the correct shot impact on the surface (6-8 bars). The process can be manual or fully automated as machines model PP-UA, complete equipped with in-out motorized work table, 2 axis gantry robot…) allow to set a fully automatic process. The machines can be equipped with paper-filter in order to remove the light oil contaminants to the recirculating solution (avoiding the degreasing of the pieces before the treatment). Knsdpfx Aajwdgi Hjbsc

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 30l / 150 kg Cleaning degree: SA-3.0 (deep and extensive corrosion) Air demand: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Working temperature: -20 - 100 °C Cleaning performance: up to 16 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 45 kg The SBM series compressed air blasting systems are mobile machines designed for advanced surface treatment using a compressed air jet and abrasive grains. The beneficial conical bottom design facilitates abrasive movement and the possibility to use different valve designs makes the abrasives suitable for processing all types of abrasives with spherical, round and/or sharp-edged shapes and any grain size. The blasting systems of the SBM series can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, which ensure quick and safe connection while maintaining high compressed air throughput. The abrasive loading is carried out by a pneumatically operated rubber membrane - without the need for inefficient screw connections - making the SBM series blasting systems safer and easier to operate. The blasting unit is also equipped with a large inspection valve, enabling quick emptying of the tank and the possibility of internal inspection. The blasting machines of the SBM series allow simultaneous operation with one or two working nozzles (depending on the model). Kjdowry R Tjpfx Aabjnc The control of the blasting device (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning directly can interrupt the operation of the machine, as required by the latest health and safety regulations (solution available as an additional option). The SBM blasting unit container was designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE-marked.

Condition: new, Technical specification: - chamber volume: 990 litres - Power supply: 230V ~ / 50Hz - Dedusting system power: 1 200 Watt - Nominal working pressure: up to 10 bar - Cleaning capacity: up to 15 m2 / h - Degree of cleaning: SA-2.0 (deep and extensive corrosion) - Air requirement: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 1,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: Vacuum-BRAGO - Pistol: Vacuum CTR - Dimensions of the working area: 1 600 x 870 x 730 mm - Sight glass dimensions: 305 x 610 mm - Work table load: up to 250 kg - Lighting: LED, adjustable in a range of +/- 90 degrees (two parts) - Coating protection: Powder coating - Working temperature: - 10 to + 50 degrees Celsius - Shared work table: Yes Ksdpfeft Sqmox Aabsnc - Inspection valve: Yes - Weight: 250 kg The offer includes: - Land Reko SCI-990-10 Chamber cleaner - Dust extraction system of the OP-1200 - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal - Pnematic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months guarantee for entrepreneurs

Condition: new, Technical specification: - Chamber volume: 420 litres - Power supply: 230V ~ / 50Hz - Dedusting system power: 1 200 Watt - Nominal working pressure: 10 to - Cleaning capacity: up to with 10 m2 / h - Degree of cleaning: SA-2.0 (deep and extensive corrosion) - Air requirement: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 1,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: Vacuum-BRAGO - Pistol: Vacuum CTR - Working area dimensions: 820x620x750 mm - Sight glass dimensions: 305x610 mm - Work table load: up to with 250 kg - Lighting: LED, adjustable in a range of +/- 90 degrees - Coating protection: Powder coating - Working temperature: - 10 to + 50 degrees Celsius - Shared work table: Yes - Inspection valve: Yes - Weight: 170 kg The offer includes: - Land Reko SCI-420-10 Chamber cleaner - Dust extraction system of the OP-1200 - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves Kjdsft Sp Nopfx Aabonc - Holder for hanging details - Pnematic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months guarantee for entrepreneurs - Device also available in leasing or financing

Condition: used, filter area: 126 m², suction capacity: 4,000 m³/h, negative pressure: 3,100 Pa, Dust extractor, welding fume extraction, self-cleaning cartridge filter for plasma, laser, sandblasting, and shot blasting applications. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, which minimizes the risk of explosion. Brand: Lincoln/SULT Model: FLC 3-6 Motor power: 5.5 kW Kjdpfx Aajw Aw Azjbsnc Capacity: 4000 m3/h Vacuum: 3100 Pa Cartridge filter elements: 6 pcs Filtration area: 126 m2 Inlet diameter: 320 mm total height: 3.20 m width: 1.25 m depth: 1.15 m stock number: 0637

Condition: used, tank capacity: 3,000 l, Condition: used Volume: 3,000 liters Design: vertical Tank Support type: feet Number of feet: 3 units Heating/Cooling: available Cylinder temperature control: double jacket Ksdpfx Asxqbp Ejabenc Heating/Cooling jacket Bottom temperature control: double jacket Internal diameter: 1,400 mm External diameter: 1,450 mm Cylindrical height: 1,650 mm Total height: 4,300 mm Equipment Manhole / dome: in the top head Outlet (alternative input): 135 mm Note: minor residues present Remarks: exterior steel parts sandblasted and primed; top head also fitted with heating/cooling Previous use: chemical industry Product contact material: V4A 1.4571 (AISI316) Double jacket material: steel Material characteristics Foot material: steel Power: 2.2 kW Agitator: anchor agitator Agitator Voltage: 220/380 V Explosion protection: Motor is explosion-proof (compliance with relevant ATEX directives under local conditions must be verified) Agitator Agitator arrangement: centrally located in the top head

Year of construction: 2025, condition: new, Sandblasting cabin for clean blasting work without soiling the working environment. Suitable for various blasting materials, e.g. quartz, glass ball, plastic ball, etc. Ideal for cleaning, derusting or paint removal from metal parts of all kinds, e.g. engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are firmly attached to the housing Viewing window with glued-on protective film enables optimum visibility and work protection during workpiece processing Dust-free working due to all-round seals on lid and door frame Sturdy storage grid allows workpieces to be placed inside the cabin With drain opening for changing the blasting material Suction pipe for the blasting material fixed at the bottom of the collecting container With compressed air connection on the outside 2 large side doors for loading and unloading from both sides, also for longer workpieces Integrated exhaust system with replaceable air filter Control of the air flow via foot pedal 2 blasting guns: one fixed and one freely movable blasting gun 3 separate switches for on/off, suction and cabin lighting 2 fluorescent tubes (230 Volt), in separate housing with protective screen and replaceable protective foil, including 5 spare foils Knsdocqm Rrspfx Aabjc regulation of the working pressure via pressure regulator with manometer Scope of delivery: High-quality blasting gun with ceramic nozzle 4 pieces ceramic nozzles (4 / 5 / 6 / 7 mm) Incl. 5 pieces of replacement foils for S

Condition: excellent (used), Year of construction: 2011, operating hours: 1,535 h, Dust extraction system Brand: Pionier Model: ZF1 Year of manufacture: 2011 Filtration capacity: 4000 m3/h Motor: 400 Volt 4 kW Previously used for sandblasting extraction 1535 operating hours Height: 3050 mm With pallet: 3200 mm Ksdpfx Asxk Uwieabonc Width: 1400 mm Depth: 1200 mm Weight: 380 kg

Condition: used, Year of construction: 2017, overall weight: 512 kg, total width: 1,400 mm, total length: 1,400 mm, total height: 2,660 mm, type of input current: three-phase, negative pressure: 4,600 Pa, filter area: 14 m², suction capacity: 2,655 m³/h, Dust extraction unit, RINGLER/Karcher Group brand, self-cleaning vacuum filter, extractor and dedusting system designed for efficient extraction of graphite, metallic, mineral dusts, hard fibers, flammable, hazardous, toxic substances, and for process dust collection during sandblasting, soda blasting, grinding, polishing, and all types of dry dust. The vacuum fan is positioned after the filter on the clean air side, minimizing the risk of explosion. Brand: Ringler / Karcher Group Model: RE201 D5.5 IE3 Pocket filter cartridge – multi-pocket Fan power: 5.5 kW Capacity: 2655 m3/h Vacuum: 4600 Pa Filter surface: 14 m2 Knsdpfx Aexn Rgusabjc Inlet diameter: 180 mm / 125 mm Electromotorized filter cleaning Device in very good condition. Warehouse No.: 1051