Used Wet Blasting Cabinet for sale (4,678)

Year of construction: 2025, condition: new, A sandblasting cabinet is an enclosed system designed for performing surface cleaning, roughening, or pre-paint preparation on small to medium-sized parts. Unlike large blasting rooms, cabinets are compact and self-contained, allowing operators to work in a controlled, dust-free environment — safely and efficiently. ⚙️ Main Features of a Sandblasting Cabinet Enclosed Working Area: The cabinet is fully sealed. The operator works through glove ports and views the process through a clear safety window. Nozzle (Blasting) System: Compressed air mixes with abrasive material (such as sand, corundum, steel grit, or glass beads) and propels it toward the surface for cleaning. Lighting System: Equipped with bright LED lighting for excellent visibility inside the chamber during operation. Bledpfx Aexr Awaebzjp Dust Extraction / Filtration Unit: Collects and filters dust generated during blasting, keeping the air clean and maintaining operator safety. Abrasive Recovery System: Used abrasive falls into a collection hopper, is cleaned, and recycled for reuse — making the process cost-efficient and environmentally friendly. Ergonomic Design: Includes features such as comfortable working height, clear viewing window, and foot pedal controls for easy operation. 🧩 Types of Sandblasting Cabinets Pressure Blast Cabinets: Deliver abrasive at high pressure — ideal for removing heavy rust, paint, or scale. Suction (Venturi) Cabinets: Use air suction to draw and accelerate the abrasive — suitable for light cleaning and precision work. Automatic Turntable Cabinets: Include rotating tables for even, automated surface treatment of parts. Wet Blasting Cabinets

Condition: like new (used), DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (as good as new!!) Dyemansion Powershot C blast cabinet Surface-friendly cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0 Year of construction: 2021 The industry standard for simple and efficient powder removal Automated depowdering increases your production capacity With the Powershot C, a medium-sized installation space can be depowdered in just ten minutes. The time you need for parts cleaning, and personnel in your production can be significantly reduced. This increases your efficiency. By investing in automated depowdering with the Powershot C up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blast cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts it contains. This configuration guarantees efficient powder removal. High ease of use with improved ergonomics and process control Experience a new level of process control with touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of the process parameters via control panel and touchscreen. PERFORMANCE: Processing time: Variable from 1 to 40 minutes, usual throughput time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or nearly 1.5x full Stratasys H350 build space Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space requirement in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: Power 1kW Requirements 3x400V> 1kW 50Hz 2,5A PRESSURE AIR: Consumption Minimum: 1.4m³/min at 2.2bar Maximum: 1.8m³/min at 5bar NOISE EMISSION: Sound level < 80dB(A) Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Bodpfetq E N Eex Abzelp We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2025, functionality: fully functional, Machine Type: Vapormatt Vapormate Manufacturer: Vapormatt The Vapormate is our highly versatile, manual entry-level system. It is a very popular choice for users who need a compact unit for smaller spaces or want to test the wet blasting process before investing in a larger system. The Vapormate comes equipped with all the features you would expect from one of our larger manual systems. The wet blasting process was invented by Vapormatt in the 1950s. Over more than 70 years of ongoing development in wet blasting, an ergonomic and cost-effective system has emerged—the Vapormate. The integrated water recirculation system ensures efficient use of consumables. Thanks to water as the carrier medium, wet blasting enables gentler and more uniform processing than, for example, sandblasting. With this technology, you can achieve smooth and even surfaces on your parts. Further technical information can be found in the attached brochure. The stated price is net, plus the currently applicable statutory VAT and shipping costs. The unit may be shown in the photos with optional accessories, which are available separately and subject to additional costs. The quoted price refers to the base machine only. Blsdpfxotqml To Abzsp If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This listing serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, phone, messaging portal). As a first step, we will send you a non-binding offer, in which we will also inform you about our general terms and conditions, legal notice, and the right of withdrawal before any purchase/contract conclusion takes place.

Year of construction: 2004, condition: excellent (used), Technical Specifications Fully automated wet blasting system Components to be processed Engine components, other components Rotary table size: Ø 1300 mm Rotary table speed: 1 – 30 rpm Rotary table load capacity: 500 kg Max. component size: Ø 1500 mm and height: 1000 mm Number of blasting nozzles: 1 – 4 Blasting pressure: 0.5 – 6 bar (± 0.01) Cabin lighting Bodpfx Aewi Hcwebzslp Blasting media used: Al2O3 500 mesh as lapping media Blasting media feed system Feed pumps Maximum flow rate: 120 l/min at up to 35% concentration Aluminum oxide

Condition: new, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Innovative wet blasting technology for perfect surfaces – Efficient. Environmentally friendly. Safe. Bodpfx Aewdpq Hsbzolp The future of surface finishing begins here: With wet blasting solutions from Proton Maschinenbau GmbH, you can rely on uncompromising quality, maximum occupational safety, and state-of-the-art technology. Whether manual or fully automated, our systems guarantee precise cleaning, effective deburring, and optimal preparation for coatings, painting, or further processing. Our wet blasting systems combine water, compressed air, and a suitable blasting media to create a highly effective cleaning process that offers clear advantages over conventional dry blasting: ✔ 100% dust-free operation thanks to the integrated jet pulse filter system ✔ Homogeneous, contamination-free surfaces – no chemical additives ✔ Gentle processing of sensitive materials without embedding blasting media ✔ Optimal results for degreasing, paint stripping, structuring, and cleaning ✔ Energy- and resource-efficient process, suitable for numerous blasting media ✔ Ideal for demanding industries such as aviation, medical technology, the automotive industry, or toolmaking Our portfolio includes, among others: 🔹 ST1 & ST5 – Compact manual wet blasting cabinets with precise foot pedal control 🔹 ST6 – Specialized machine for rim processing up to 26 inches 🔹 ST12 – Fully automatic drum system with recipe management and intelligent control 🔹 ST17 – Ergonomic system with rotating platform, wash basin, and transport trolley All machines feature: 🔧 Stainless steel housing with laser seam 🖥️ Intuitive PLC touch panel with programming and maintenance instructions 💡 LED interior lighting, safety features, and automated media return Areas of application: Cleaning aluminum or plastic molds, deburring precision parts, preparing implants or prototypes from additive manufacturing – we offer the right solution for every application. Proton stands for: 2-year warranty on manufacturing quality, 10-year spare parts availability, personalized consulting, and robust systems "Made in Germany." 👉 Discover the advantages of wet blasting technology now – and reach a new level of surface finishing.

Condition: good (used), Dimensions of the blasting cabin approx.: - 1.40 m wide - 1.65 m high - 1.00 m deep Bedpfx Ajwtyd Ajbzolp Dimensions of the extraction unit approx.: - 0.7 m wide - 2.60 m high - 0.8 m deep

Condition: new, Year of construction: 2025, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 1,500 mm, total height: 1,000 mm, total length: 1,500 mm, type of input current: three-phase, suction capacity: 1,500 m³/h, turntable diameter: 1,200 mm, Equipment: cabin, Wet-blasting machines PP-UM are designed to manage an homogeneuos mixture of shot, air, water and as requested detergent. The final result is a soft blasting process on the surface (in comparison to a dry blasting process). The common media blasting shots are corundum, silicates and glass beads. A special pump (heavy duty design for aggressive liquids) allows to maintain homogeneously the solution and delivers the mixture to the blasting gun/guns. The compressed air guarantee the correct shot impact on the surface (6-8 bars). The process can be manual or fully automated Bljdpfx Abjwdgi Hezep as machines model PP-UA, complete equipped with in-out motorized work table, 2 axis gantry robot…) allow to set a fully automatic process. The machines can be equipped with paper-filter in order to remove the light oil contaminants to the recirculating solution (avoiding the degreasing of the pieces before the treatment).

Condition: good (used), Year of construction: 2017, CNC Speedform Rapidcleaner for automated depowdering of 3D-printed parts produced with powder bed fusion technologies (SLS, MJF, SAF). Features (manufacturers spec): Up to several thousand parts per operation, depending on size and geometry Extremely short processing time: 1-10 minutes Fully automated blasting with micro glass beads Absolutely dust-free part quality Perfect cleaning, even with the smallest bore diameters Lowest and optimized blasting material requirement Robust and very low-maintenance system design Suitable for all plastic materials Simple and safe operation Clean separating device Machine operates with 2 blasting nozzles and two nozzles with ionized air. The blasting media is sieved to allow fine control over the media used in the process. Furthermore this machine has an HMI retrofitted which allows to program different recipes with multiple process steps. 2 machines available towards the end of Feb. '25 Bjdjvuztcopfx Abzjlp Keywords: AMT, Dyemansion, AM Solutions, Rosler, Additive Manufacturing Technologies, EOS, HP, Farsoon, 3d printing, selective laser sintering, mjf, multi jet fusion, 3d print, additive manufacturing, eosint, blasting, depowdering, shotpeening

Condition: new, Year of construction: 2025, functionality: fully functional, air demand: 1.13 m³/h, pressure: 7 bar, warranty duration: 24 months, total width: 1,370 mm, total height: 2,080 mm, total length: 1,150 mm, overall weight: 350 kg, Equipment: cabin, lighting, The Vapormatt PUMA is a high-quality and versatile manual wet blasting cabinet from Vapormatt, the leading company in the wet blasting sector and the inventor of this technology in the 1950s. Over more than 70 years of development, Vapormatt has engineered the PUMA to be both ergonomic and efficient. With an optional insertable basket, small batch parts can be processed, and a clamping device enables easy handling of rims or wheels. Large workpieces weighing up to 125 kg can also be placed on the robust stainless steel grid. For easier operation, an optional stainless steel rotary table is available. The integrated recirculating water system with cascade tank, filter unit, and return pump ensures efficient use of water and blasting media. Compared to sandblasting, wet blasting allows for gentler and more uniform processing, thanks to water as the carrier medium. This technique enables you to achieve smooth and consistent surfaces on your parts. Technical data: - Internal dimensions: 1100 x 1100 x 1200 mm (LxWxH) - External dimensions: 1400 x 1200 x 2100 mm (LxWxH) - Pump output: 2.2 kW (400 V / 50 Hz) - Sump volume: approx. 142 L water / approx. 15–40 kg abrasive media - Work surface load capacity: 125 kg Prices are net plus the current applicable statutory VAT and shipping costs. The images may show the machine including optional accessories, which are available at additional cost. If you are interested, we look forward to hearing from you. We are happy to provide professional and non-binding advice. Bljdpstqmh Ejfx Abzop The European Commission provides a platform for extrajudicial online dispute resolution (the OS platform). This offer serves exclusively as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, telephone, online messaging platform). In the first step, we will provide you with a non-binding offer, together with information about our general terms and conditions with legal notice and your right of withdrawal, before any purchase or conclusion of contract takes place.

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 20.10.09 with carriage and turntable. Blodpsfnh Rvofx Abzep width: 2050mm depth: 935mm height: 955mm Pneumatic lifting door with the advantage that the abrasive falls into the cabin when opening the door and not on the floor. If you have any questions about technical specifications etc. please contact us in writing or by telephone. The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the well-known contacts of many years.

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. Bljdpswc Nrnsfx Abzep The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: new, Year of construction: 2025, Pressure blasting cabinet DSK 15.15.20.RB75 with or without roller conveyor. Blasting chamber W=1150 D=1150 H=930mm. 1 TÜV-tested pressure vessel 20l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Dust extraction filter 2000m³/h 2,2kW Bsdpfx Asga I R Ejbzslp

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 1102 S with carriage and turntable. Bedodhl Ngepfx Abzjlp Width: 1500mm depth: 1235mm height: 995mm Lift door pneumatic. Questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2025, Pressure blasting cabin 4-axis controlled cleaning of moulds, steel rings, ingot moulds in the aluminum, tire mold, pressing tools, etc. Bljdpfx Aedrtanebzop The travel of the jets is freely programmable. 2 PCs automatic nozzle and 1 St. hand nozzle for cleaning the parts. HARDOX turntable and feed screw for long-lasting use of the blasting machine. For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, functionality: fully functional, Year of construction: 2025, There are several types of ball mill grinding plants designed for different applications and industries. The choice of the specific type depends on factors such as the material being processed, the desired final product characteristics, and the production capacity required. Here are some common types of ball mill grinding plants: 1. Open Circuit Ball Mill: - In an open circuit ball mill, the material passes through the mill only once, and the finished product is obtained directly. This type is suitable for dry grinding and often used for cement grinding. 2. Closed Circuit Ball Mill: - Closed circuit ball mills have a separator, which separates the fine particles from the coarse ones. The coarse material is returned to the mill for further grinding, while the fine product is collected and sent to storage. This type is commonly used in mineral processing circuits. 3. Overflow Ball Mill: - Overflow ball mills discharge the slurry over a trunnion at the discharge end. This type is suitable for wet grinding or when the slurry has a high moisture content. 4. Grate Discharge Ball Mill: - Grate discharge ball mills discharge the slurry through the grate at the discharge end. This type is suitable for dry or wet grinding and is often used for grinding materials with high moisture content. 5. Peripheral Discharge Ball Mill: - In a peripheral discharge ball mill, the grinding chamber is larger at the feed end, allowing the material to be discharged peripherally. This type is suitable for coarse grinding and often used for rod mills. 6. Planetary Ball Mill: - Planetary ball mills are designed for high-energy milling and are suitable for both dry and wet grinding. They have one or more grinding jars that rotate around a central axis, creating a planetary motion. This type is often used for laboratory applications. 7. Ball Mill with Ceramic Lining: - Some ball mills are lined with ceramics to reduce wear on the inner surface of the mill. This is particularly common in the production of ceramic materials, pigments, and refractories. 8. High-Energy Ball Mill: - High-energy ball mills use mechanical alloying processes to create new materials. These mills operate at high rotational speeds, causing the balls and the material being ground to impact with high energy. They are suitable for milling hard and brittle materials. 9. Air-Swept Ball Mill: - In an air-swept ball mill, the material is fed into the mill with ambient air, and the finished product is collected in a dust collector. This type is commonly used for coal grinding in the cement industry. 10. Tube Mill: Bjdpfx Abeq Nx Alozjlp - Tube mills are long cylinders with a charge of steel balls used for grinding raw materials, coal, and clinker. They can be open or closed circuit and are widely used in cement and mineral processing industries. 11. Continuous Ball Mill: - Continuous ball mills operate continuously, and the material to be ground is fed at one end and discharged at the other. These mills are suitable for grinding materials in a continuous process.

Condition: new, Year of construction: 2025, -Smart Safety Clean Air Enhanced Efficiency -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility -Fire & Explosion Prevention: Bledpfovg U Dxjx Abzjp Effectively minimizes hazardous particles and ignition sources right at the source -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety

Condition: not inspected (used), functionality: unexamined, total length: 1,200 mm, total width: 770 mm, total height: 1,200 mm, overall weight: 400 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table diameter: 350 mm Table dimensions: 600 x 210 mm Number of T-slots: 4 Table dimensions: 600 x 200 mm Number of T-slots: 4 MACHINE DETAILS Dimensions (L x W x H): 1,200 x 770 x 1,200 mm Weight: 400 kg EQUIPMENT Collets Bodpfexqm Erex Abzjlp Boring heads Various clamping devices Counter-holder Rotary table Milling tables All accessories suitable for DECKEL tool milling machines

Condition: used, functionality: fully functional, Flow Cabinet/Safety Cabinet. Bsdpsupx E Ijfx Abzolp Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine This is a combo machine pelletizer and sandblasting machine (two in one) very low operation hours Bsdpfx Aehmi Ucebzelp

Condition: used, This listing is for the Walker Class 11 Biological Safety Cabinet The unit is in full working condition and is ready for immediate use A Walker Biological Safety Cabinet is a type of biosafety cabinet (BSC) designed and manufactured by Walker, a company that specializes in laboratory containment equipment. These cabinets are used in laboratories to provide a controlled, contaminant-free environment for handling potentially hazardous biological materials. What Is a Biological Safety Cabinet? A Biological Safety Cabinet (BSC) is an enclosed, ventilated laboratory workspace designed to: Protect the user from exposure to biohazards, Protect the experiment or product from contamination, Prevent environmental contamination. They achieve this through HEPA (High-Efficiency Particulate Air) filtration and controlled airflow systems. Walker Biological Safety Cabinet – Key Features HEPA-filtered airflow: Removes airborne particles and microorganisms. Laminar airflow: Provides a clean work area by maintaining unidirectional air movement. Front access sash: Allows operator access while maintaining airflow barrier. UV light for sterilization when not in use. Bjdpfx Ajxhfr Ejbzjlp Ergonomic design: For user comfort during long procedures.

Condition: new, fuel type: electric, Year of construction: 2025, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Max input size: 25mm Capacity:35-60 t/h Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. 5. Grinding Media: Bedpfsq Igiisx Abzjlp - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. 6. Liners and Lifting Aids: - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications.

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 180.5 kW, AEG Thyristor, AEG Thyro-A, 2A 400-350 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Manufacturer: Amarc srl Type: 120254; 3057 Year: 2012 Dimensions: 1020 x 530 x 2130 mm Weight: 200 kg Cabinet: 400 V; 3-phase; 50 Hz; 262 A; 180.5 kW Power transmission system AEG Thyro-A 2A 400-350 HFRL1 (Thyristor) AEG Thyro-A: Thyristor 400 V Blsdpfx Asrbzygjbzop 350 A Cooled Power regulator Load supervision on analog outputs

Condition: not inspected (used), functionality: unexamined, total length: 1,370 mm, total width: 750 mm, total height: 1,100 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned off as part of a business liquidation. Placing a bid obligates timely collection between 26.01.2026 and 29.01.2026! Included: Boring heads Boring tools Collets High-speed milling head Counterholder Bljdsxqm Duspfx Abzjp Additional clamping equipment The accessories are suitable for DECKEL tool milling machines. MACHINE DETAILS Dimensions (L x W x H): 1,370 x 750 x 1,100 mm Weight: 300 kg

Condition: used, functionality: fully functional, Good working condition. Please check out our other listings as well. Blsdpfx Ajupx E Ujbzsp

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 600 kW, AEG Thyristor, AEG Thyro-A, 2A 400-495 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Manufacturer: Amarc srl Bljdpfxerby Uvs Abzsp Type: 120254; 3058 Year: 2012 Dimensions: 1800 x 515 x 2130 mm Weight: 400 kg Cabinet: 400 V; 3-phase; 50 Hz; 868 A; 600 kW Power transmission system and distribution AEG Thyro-A 2A 400-495 HFRL1 (Thyristor) AEG Thyro-A: Thyristor 400 V 495 A Cooled Power regulator Load supervision on analog outputs