Used Sawmill Multi Cross Cut for sale (22,184)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 189 h, load capacity: 40,000 kg, fuel type: electric, battery model: EPzS, battery capacity: 1,250 Ah, battery voltage: 80 V, color: grey, Equipment: cabin, lighting, Manufacturer: Multi-Trans Type: Electric platform truck with cab Model: SET 40 Payload capacity: 40,000 kg Year of manufacture: 2018 with TÜV appraisal for obtaining an exemption according to § 70 StVZO for public road use Loading area: External vehicle dimensions approx. 8200 x 2500 mm, clear loading area behind the cab approx. 6590 x 2500 mm Loading height: approx. 1005 mm Loading area cover: Tread plate Steering: Two-axle steering Drive type: Electric Operating hours: 189 Battery: 80 V 10 EPzS 1250 Ah, K5 Paintwork: Main frame powder-coated RAL 7037 Dust Grey, cab powder-coated RAL 5000 Violet Blue Technical condition: very good Visual condition: very good Availability: upon request Chassis: two steered axle lines, each with two oscillating axles, and two non-steered driven axle lines mounted on four longitudinal rocker arms for even wheel load distribution Cab with operating and display instruments: - At the front, centrally located in the driving direction, a comfort driver's cab, mounted sound- and heat-insulated - Driver's cab mounted on the vehicle main frame with rubber silent blocks for spring suspension - Protective tubular profile bar at the rear and on the cab roof to protect against falling objects - Windscreen and rear window made of safety glass according to directive ECE R 43 - Cab equipped with two lockable doors including sliding windows - Front and rear windows fitted with two-stage electric wipers - Sun visor for driver - Interior mirror - Interior cab lighting - Steering wheel adjustable (height, tilt) with quick adjustment - Steering wheel hydraulically assisted - Electric fresh air fan with electric heater and defroster vents for front and side windows, two-stage fan ventilation, manual stepless temperature control via thermostat - Driver’s seat air-suspended, suspension stiffness and height adjustable to body weight - Passenger seat mechanically suspended comfort seat - Direction selector forward/reverse with neutral position on steering wheel - Two-stage speed selection: creep speed up to 3 km/h, fast speed up to 6 km/h - Infinitely variable driving speed via foot accelerator pedal - Brake pedal - Battery discharge indicator with operating hours counter (only records hours during operation) - Main key switch - Emergency stop switch - Hazard warning lights - Direction indicators with visual signal and audible indicator relay - Horn - Light switch - Two external mirrors mounted on or in front of the cab, mirror arms mechanically adjustable and lockable - High-quality air-conditioning system mounted on the cab roof Special equipment: - Access step to loading area behind the cab on the left side in driving direction, with plug-in or fixed handrail; storage bracket for uninstalled handrail mounted on vehicle - 300 mm high end stop bar mounted at the front end - Vehicle can be maneuvered from the cab or via radio-controlled handheld unit from outside the cab - 9 lashing or crane rods each made of round steel welded horizontally into the outer beams on both longitudinal sides - Ultrasonic sensors for distance measurement (object recognition; not a personnel protection device), creep speed and emergency stop cutoff variably adjustable - Reversing camera system with monitor Kwsdex Expzopfx Adwst Safety features: - 2 emergency stop switches - Audible warning signal only when reversing - Rotating beacon mounted on the driver's cab, active only during driving operation

Condition: like new (used), Year of construction: 2022, operating hours: 65 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness copper (max.): 30 mm, sheet thickness brass (max.): 30 mm, total width: 1,500 mm, total length: 3,000 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, Equipment: documentation/manual, Slightly used Swift Cut Pro 3000 with Hypertherm 125A power source. Kjdpfsx E At Rox Adwjwt

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, table height: 1,750 mm, table length: 3,710 mm, working width: 1,500 mm, table width: 1,960 mm, We are selling a Swift-Cut 3000XP CNC plasma cutting center with a Hypertherm MAXPRO200, purchased mid-2023. The machine has seen very little use. According to the manufacturer, the maximum sheet thickness is 50 mm; we have cut sheets up to 40 mm thick. The cuts were clean and straight, with minimal slag. Piercing in the middle is possible up to 32 mm thickness. The machine offers online support from Swift Cut in both English and German. Solid Edge software is installed on the machine. Kwjdoxxighjpfx Adwet The machine is immediately available. We are planning to invest in further production equipment. The unit is located at our subsidiary in the Czech Republic – Vrbno pod Pradědem.

Condition: good (used), Year of construction: 2006, Belt sander 75 with pedestal Kwjdpfxexyqi To Adwjt

Condition: used, total length: 10,500 mm, Year of construction: 2016, load capacity: 14,000 kg, Trailer Multi-Trans VAL 30 Drive No Drive Kwedpfsxd Edmex Adwjt Year built 2016 Lifting weight (kg) 14,000

Condition: refurbished (used), A complete used sawline is available for sale. The first sawing stage includes an edger, and the second stage features profiling machines. All conveyors and components are included. The line will be fully refurbished mechanically; the electrical system is complete but sold as is. Please inquire for pricing and further details. Kwedpfewa Nrpox Adwjt

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Ksdpfx Adou Tg I Dewewt Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: like new (used), total length: 4,000 mm, total width: 2,500 mm, total height: 665 mm, color: blue, Operating conditions: The trailer is designed for use on level, paved surfaces in internal company transport. The trailer components are not designed for combined operation with multiple trailers in a train. Payload: 10 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or strip loads are only permissible upon prior notification. Loading area: Dimensions approx. 4000×2500 mm, loading height approx. 665 mm, loading surface covered with softwood planks, all-round edge protection. Kodpfjxrtqwsx Adwjwt Main frame: Robust welded construction made of profile steel sections. Steering: Four-wheel kingpin steering, drawbar can be raised, removed, and swapped from front to rear. Coupling height at towing vehicle approx. 350–600 mm (other coupling heights only permissible upon prior notification), towing eye according to DIN 74054, Ø 40 mm, drawbar drop guard according to accident prevention regulations (UVV). Running gear: Both axles steered, super-elastic tyres 21×8-9 (approx. 517×186 mm), wheel hubs with tapered roller bearings and lifetime lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Kodpfx Adsxrtlujwewt Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: excellent (used), total length: 10,000 mm, total width: 2,400 mm, total height: 975 mm, color: blue, Operating conditions: The trailer is designed for use on flat, paved surfaces in in-plant traffic. Combined operation: The trailer components are not (without a coupling) designed for combined operation with multiple trailers. Payload: 32 t at 6 km/h with evenly distributed load (surface load) between the axles. Point or line loads are permissible only upon prior approval. Loading platform: Dimensions approx. 10,000×2,400 mm, loading height approx. 975 mm, platform surface covered with softwood planks, all-around edge protection. Steering: Front turntable steering, tow bar can be raised and detached, coupling height on towing vehicle approx. 350–500 mm, towing eye according to DIN 74054, diameter 40 mm, tow bar fall protection as per accident prevention regulations (UVV). Chassis: 2 steered and 2 rigid pendulum axles, wheels with elastic solid rubber tires approx. 450 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue. Additional equipment: On each long side, 2 horizontal round steel lashing sleeves welded into the outer frame. Kwjdpfoxrtkwjx Adwet

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: Kodsxrtdqspfx Adwowt The trailer is designed for use on flat, paved surfaces in internal company transport. Combined Operation: The trailer components are not (without a trailer coupling) designed for combined operation with multiple trailers. Payload: 16 t at 6 km/h with evenly distributed loading (area load) of the loading platform between the axles. Point or line loads are only permitted upon notification. Loading Platform: Approx. 6000 x 2400 mm, loading height approx. 670 mm, platform covering made of softwood planks, all-round edge protection. Steering: Four-wheel stub-axle steering, drawbar tiltable, removable, and can be repositioned from front to back, coupling height at the towing vehicle approx. 320 mm (other coupling heights only permitted upon notification), towing eye according to DIN 74054, diameter 40 mm, drawbar drop protection according to UVV. Chassis: Both axles steered, solid rubber elastic tyres approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 Ultramarine Blue. Optional Equipment: - 2 lashing rods made of round steel welded vertically into the outer frame on each long side - Double-acting wheel chock with holder and chain

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: Kwedpoxrtb Nsfx Adwst The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Finish in RAL 5002 ultramarine blue. Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.

Condition: like new (used), total length: 10,000 mm, total width: 3,000 mm, total height: 1,105 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved surfaces for internal plant transport. Tandem operation: The trailer components are not designed (without a coupling device) for tandem operation with multiple trailers. Payload: 60 t at 6 km/h with evenly distributed load (surface load) across the load area between the axles. Point or line loads are only permitted upon prior notification. Main frame: Robust welded construction made from profile steel. Loading area: Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, loading surface covered with softwood planks, all-round recessed edge protection. Steering: All-wheel steering on 4 oscillating axles; drawbar can be raised, removed, or repositioned from front to rear; coupling height at the towing vehicle approx. 650 mm (other coupling heights only permitted upon prior notification); towing eye according to DIN 74054, 40 mm diameter; track rods with adjustable ball joint heads; diagonal or tie rods adjustable and mounted with low-maintenance pivot bearings; drawbar drop protection according to accident prevention regulations (UVV). Kjdpfx Adexrr Uhswjwt Chassis: 4 steered oscillating axles, 2 steered axle lines for even load distribution on all wheels; wheels with solid rubber elastic tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue Rental or sale EU-wide.

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: Kedpfx Adsuf Rw Towewt All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: excellent (used), functionality: fully functional, Equipment: UVV, cabin, For rental only! Kwjdpfx Asxqp Icedwst

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments Kedpfx Adofv Hphewswt - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 06795, Horizontal infeed drumchipper, drum diam 700 mm, infeed opening width 570 mm, el.motor 75 kW, 4 chipping knives. Chipper can be delivered together with infeed vibroconveyor with metaldetector Kwjdpfx Adjxcphyjwet

Condition: good (used), Year of construction: 2017, BCS Autobox 2600 + Multicut 3 Year 2017, Kwodpfor Nx Unox Adwst Max. sheet width: 2600 mm Auto set slotting tools Auto set creasing tools Auto set. Tool less size change Feeder with capacity 300 mm height of blanks Typical set-time of 1 minute High speed up to 100m/min Over 50 Fefco box styles possible Handles singe to double wall corrugated board (max. 10 mm) Touch Screen Control panel for easy programming of new or stored box size and styles

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more Kjdpfod Ecncex Adwewt 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Kwedpjttlfkofx Adwst Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Ksdpfx Adsq Ulh Hswswt Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: used, Year of construction: 2018, functionality: fully functional, TREPKO S.A. offers for sale the multifunctional machining centre MULTICUT 500iS. Machine parameters: Control: Siemens 840Dsl Turning diameter over bed: 1030mm Max. turning diameter: 690 mm Max. turning length: 1527mm Y axis: 370mm Spindle bore: 106mm Speed: 3500 rpm Power: 25%/constant -74/59kW Kwsdpfx Aowhipqsdwst Milling spindle speed: 12000 rpm Milling spindle power: 25%/constant -27/13kW Taper: HSK A63 B axis: -120º/+ 105º Tool magazine: 81 Chip conveyor Workspace exhaust Doors equipped with Visiports Electrical cabinet air conditioner Interception option workpiece Automatic door opening Cooling through the spindle 60 bar Automatic tool and workpiece probe Hydraulic steady rest SMW SR5 (45-310 mmØ) We offer a complete set of HSK63 holders Expert valuation available for inspection Year of production 2018 Power 59kW Dimensions with chip conveyor (lxwxh): 6500x3950x3760 Weight 23000kg

Condition: used, functionality: fully functional, In this offer you purchase a used Multi Purpose Stacker "Plockmatic MPS" Object of sale: 1 x Plockmatic MPS Type F139-101 Fits other Plockmatic finishing machines Fits various Canon / Ricoh machines Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Kjdpswnqp Esfx Adwewt Seaworthy packaging and worldwide shipping are available on request! For further information you can of course also contact us personally.

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm Kodpfx Ajh Rkhnodwswt 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 210 mm, cutting width (max.): 3,000 mm, cutting length (max.): 11,200 mm, height adjustment type: electric, overall weight: 2,800 kg, saw blade diameter: 550 mm, power: 15 kW (20.39 HP), We sell: JRIMAC rip saw/multifunction saw MULTICUT -NEW- - Precise and clean cut - Cutting direction left - right/ right - left - Flexible and efficient working - Air cushion table for comfortable processing of panels Kwodpfx Aordh Tkjdwjt - 90° stop ruler for cross-cuts - Clamping jaws for optimum processing of sheet material - Forced-guided pneumatic hold-down device with zero cut device - Various options for triggering the cut - Convenient, fully automatic saw blade height adjustment - Stepless adjustment of the width stop - Electronic positioning control - Saw blade quick clamping system "JRIMAC" - High work safety - User-friendly - Cutting accuracy +/- 0.5 mm