Used Scan Max for sale (25,946)

Condition: new, Year of construction: 2025, Horizontal Cartoner 60-ECO – Compact and Efficient Limited space is a common challenge in production environments. Our BASIS 60-ECO horizontal cartoner offers a compact and reliable solution. The machine was presented as an exhibition machine at a trade fair and is now available for sale. The total length including conveyor is only about 4 meters, making it ideal for facilities with limited space. The machine can process up to 60 cartons per minute. - Flexible product infeed adaptable to different products - Optional automatic product timing system - Carton size up to 220 mm (L) × 120 mm (W) × 400 mm (H) - Siemens PLC control and Siemens servo drives - Nordson hot-melt gluing system Ibjdpfomftm Njx Acroa Customers are welcome to visit our facility in Germany to test the machine with their own products and set up the system according to their needs. The price is negotiable. We also offer a wide range of horizontal and vertical cartoners as well as flow-wrapping machines.

Condition: as good as new (ex-display), Used High Pressure Concrete Nailer HN 25 C2 MAX Powerlite The HN25C2 is a compact nailer for concrete and steel, allowing you to work as close as 6 mm from the edge, making it ideal for tight corners. Its main area of application is work on metal stud framing. The nose of the HN25C2 is compact, meaning you can also work with thin metal profiles. With special nails, it can penetrate steel up to 5.0 mm thick or drive nails into concrete with a compressive strength of 60 N. Technical specifications: • Operating pressure: 12–25 bar • Nail length: 15–25 mm • Magazine capacity: 100 nails • Air consumption: 1.6 ℓ/cycle at 18 bar operating pressure • Weight: 2.0 kg The nailer was used for demonstration purposes and is therefore classified as used. It is in perfect technical condition. Supplied in a transport case with user manual. For further details, please refer to the pictures. Ibedpjyizrfefx Acrsa You will receive an invoice with VAT shown separately. Payment in advance (bank transfer) only – no PayPal! Collection from our shop is of course also possible. Shipping by UPS – shipping costs €8.90. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1987, turning diameter 400 mm turning length 600 mm swing diameter 600 mm spindle bore 73 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Iodeyutrujpfx Acreba We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2014, We are offering a top 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection, including all cables. Unfortunately, the PC is password-protected, but the software is included on CD. Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready to operate with GOM ATOS IIe. Software on CD, steel scalebars with ATOS evaluation dongle. Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm² Iodsw E I Itopfx Acrsba

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: L705226, functionality: fully functional, TECHNICAL DATA Manufacturer: Baron Max Model: KL-2680 Year: 2007 Serial Number: L705226 Control Unit: Fagor 8055TC WORKING CAPACITY Swing over bed: 670 mm. Center height to bed: 335 mm. Center height to top cross slide: 205 mm. Swing over cross slide: 400 mm. Dis. Between centers: 2100 mm. Width of bed: 450 mm. HEADSTOCK Spindle nose: A1-11 Spindle bore: 305 mm. Bar capacity: Ø 105 mm. Range of spindle speeds: 3 rang Gears Auto Shifting Spindle speeds range: H: 1500-331 rpm M: 330-93 rpm L: 92-24 rpm Taper in spindle: MT#6 SADDLE Ibjdjvai Swspfx Acrja Longitudinal travel (Z-axis): 2000 mm. Cross-slider travel: 450 mm. Size of tool holder: Boring Tool: Ø 40 mm. O.D. Tool & Facing Tool: 25 mm. Ball screw (Dia x pitch): X-Axis: Ø25 mm. x P 5 mm. Z-Axis: Ø50 mm. x P 10 mm. TAIL STOCK Quill diameter: Ø105 mm. Quill travel: 220 mm. Quill taper: MT#5 ENGINE Spindle motor: 20HP Z-axis drive motor: 12 Nm. (FKM 44.3) X-axis drive motor: 6.3 Nm (FKM 42.3) Coolant pump motor: 1/4 HP X, Z-AXES FEED X axis rapid travel: 6 M/min. Z axis rapid travel: 8 M/min. GENERAL Power Required: 20 KVA. Floor space (L x M x H): 4090x1950x1820 mm. Approx, machine weight: 4700 Kgs. EQUIPMENT Coolant system Manual 4-way tool post 4 Jaws Self-centering scrolling chuck Ø 12". Steady rest

Condition: new, Our best seller, as long as it comes to making many kinds of springs, including torsion, double-torsion, extension & wireforms. Cheap in price, but valuable in terms of production rates, accuracy and possibilities. Isdpfx Acsi Ik D Eerjba

Condition: new, The CR 35 (up to Ø 3.5 mm) completes the range between the CR 23 (up to Ø 2.3 mm) and the CR 45 (up to Ø 4.5 mm). The machine has between 12 and 16 axes, below are the 12 basic axes: Ibedpovbdq Rofx Acrea - wire feed - wire rotation - nozzle rotation - servo spinner - 8 independent slides (8 axes) Optional (up to 4 axes): - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for lifting the second (German-type) extension spring eyelet. Maximum feed speed: 54 m/min. Machine dimensions: 2.36 x 2.10 x 2.10 m. Machine weight: 2,300 kg. If you have any further questions, please do not hesitate to contact us.

Condition: not inspected (used), Year of construction: 2014, Cooling capacity: 10.1 kW Flow rate: 5,000 L/h Weight: 180 kg Ibodoy Nif Iepfx Acrsa The unit is ready for immediate shipment and is available immediately!

Condition: used, mileage: 95,822 km, power: 368 kW (500.34 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 1402. NA60495 ----EQUIPMENT & condition see images ENGINE, TRANSMISSION & CHASSIS * Intarder LIGHTING & VISIBILITY * LED lights TECHNOLOGY & SAFETY * Tire pressure monitoring system (TPMS – Tyre Pressure & Temperature Monitoring System) ----The vehicle is in unprepared condition! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to consider your vehicle for trade-in. Financing / leasing possible even without down payment! Any questions? We are happy to advise you! Iedpfexci Hvjx Acroba

Condition: used, mileage: 1,59,999 km, power: 120 kW (163.15 HP), first registration: 08/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Buy online. Finance digitally. Have it delivered nationwide. ----Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [3536]---- Your advantages with us: * Digital consultation by phone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle, whether old or new Optional extras: * 12-60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle inspection) * Nationwide delivery---- Summer offer: On request and for an additional charge of only €999, increase the towing capacity to up to 3,500 kg (vehicle and manufacturer dependent).---- Vehicle highlights: 19% VAT can be shown German vehicle Regularly maintained Immediately ready for use Euro 6 standard 1st owner Refrigerated box ThermoKing V300 Max Driving and stationary cooling 2-chamber cooling Air suspension on the rear axle Automatic transmission Special features: Audio system Audio 15 (radio with color display), outside temperature display, battery disconnect switch 1-pole, roof console with reading lamp driver/passenger side, entry lights, generator 180 A, folding cover for storage compartment, fuel filter with water separator, steering wheel (steering column mechanically adjustable), steering wheel with multifunction including trip computer, engine drive front with carrier for additional coolant compressor, navigation system Becker MAP Pilot, spare wheel holder under frame end including jack, seats in the cab: double passenger seat, seats in the cab: double passenger seat with foldable backrests, seats in the cab: driver's seat comfort, stabilizer rear reinforced, stabilizer front reinforced, interior trim rear wall, fleece battery 95 Ah, front axle reinforced, heat-insulating glazing (windshield with band filter at the top) Additional features: Adaptive brake light, airbag driver side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, battery 74 Ah, brake system with ABS+ASR, roof lining in the cab, glove compartment lockable, body/structure: standard flatbed, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, model refinement, engine 2.1 liter - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, tire repair kit with compressor, low emission according to emissions standard Euro 5, safety belt system with warning system (driver side), seat cover / upholstery: fabric Lima, seats in the cab: passenger seat adjustable, service interval display Assyst, permissible total weight 3.50 t ---- Would you like to lease or finance? We offer attractive offers – even without a down payment! Please contact us. Ibjdpfx Acozu H Easroa Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: used, mileage: 1,95,781 km, power: 368 kW (500.34 HP), first registration: 06/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FORD F-MAX 500 with complete, top-of-the-line equipment First registration 06/2023, from first owner Mileage 195,781 km Mega-Cab ComfortPlus (CPP), Luxury Pack LUX, air suspension for cab, 2 bunks, comfort driver's seat, comfort co-driver's seat, storage compartments on the rear wall above the second bunk, automatic climate control, stand-alone air conditioning system, multi-function leather steering wheel, LED low beam headlights, winter package with electrically heated windshield, light and rain sensor, truck navigation system, STABO CB radio, storage table on dashboard, deep sun visor with 2x LED spotlights, 2x LED rotating beacons, illuminated roof lamp box ZF automated manual transmission TRAXON 12-speed RETARDER 2-circuit tipping hydraulics, switchable high-pressure/low-pressure system, large aluminum hydraulic oil tank 200 L, Aluminum diesel tank 600 liters Tires: Front axle 385/55 R 22.5, tread depth 11 mm Rear axle 315/70 R 22.5, tread depth 15 mm Ibedpfx Acozhzm Sorsa Saddle height approx. 1,150 mm Full safety package with ABS, SEP, ASR, lane keeping assist, emergency braking assist, adaptive cruise control ACC, tire temperature monitoring, tire pressure monitoring RENTING is the new BUYING; with us, it is also immediately available with full-service leasing.

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit Ibedpfxszccuuo Acroa – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: used, diameter / mm Iodpey Suy Aofx Acreba Cutting (quantity) / weight / kg FUJI MAX-OP1 Handwheel TEACH PENDANT Electronic handwheel The handwheel works perfectly.

Condition: used, Year of construction: 2011, length 300 mm centre height ca. 30 mm diameter 0,5 - 52 mm weight of the machine ca. 0,103 t dimensions of the machine ca. H 0,84 x L 1,00 x P 0,435 m Iodpfx Acjwmwwasreba Serviced and calibrated by Studenroth on 24.07.2024 Length and diameter measuring device: Equipment/accessories: -Software -monitor and computer -Technical documentation

Condition: excellent (used), Year of construction: 2019, Containerized boiler system HOVAL MAX-3 Output: 1750 kW Year of manufacture: 2019 Iodpszp R Nfefx Acrsba Burner: ELCO

Condition: used, mileage: 1,69,000 km, power: 120 kW (163.15 HP), first registration: 08/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Buy online. Finance digitally. Have it delivered nationwide. ----Chat with us now via WhatsApp: Get in touch with our sales consultant quickly and easily. Internal ID number: [3537]---- Your advantages with us: * Digital consultation via telephone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle, whether old or new Optional extras: * 12-60 month used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle safety inspection) * Nationwide delivery---- Summer offer: Upon request and for an additional charge of only €999, increase the towing capacity to up to 3,500 kg (vehicle and manufacturer dependent).---- Vehicle highlights: Ibedpfjzr Dikox Acrea 19% VAT can be shown German vehicle Regularly maintained Immediately ready for use Euro 6 standard 1st hand Refrigerated box ThermoKing V300 Max Driving and stationary cooling 2-chamber cooling Air suspension on the rear axle Automatic transmission Special equipment: Audio system Audio 15 (radio with color display), outside temperature display, battery disconnect switch 1-pole, roof control unit with reading light driver/passenger side, entry lights, generator 180 A, folding cover for storage compartment, fuel filter with water separator, steering wheel (steering column mechanically adjustable), steering wheel with multifunction including trip computer, front engine drive with carrier for additional coolant compressor, navigation system Becker MAP Pilot, spare wheel holder under frame end including jack, seats in the cab: passenger double seat, seats in the cab: passenger double seat with folding backrests, seats in the cab: driver's seat comfort, rear stabilizer reinforced, front stabilizer reinforced, rear wall paneling, fleece battery 95 Ah, front axle reinforced, heat-protective glazing (windshield with band filter at the top) Additional equipment: Adaptive brake light, driver's side airbag, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, battery 74 Ah, braking system with ABS+ASR, roof lining in the cab, glove compartment lockable, body/superstructure: standard platform, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, model update, engine 2.1 liters - 120 kW CDI KAT, wheelbase 3665 mm, smoker's package, tire repair kit with compressor, low emissions according to Euro 5 exhaust standard, safety belt system with warning system (driver's side), seat cover / upholstery: fabric Lima, seats in the cab: passenger seat adjustable, maintenance interval indicator Assyst, permissible total weight 3.50 t ---- Do you want to lease or finance? We offer attractive offers - even without a down payment! Feel free to contact us. Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Year of construction: 2026, condition: used, NEW Automatic loading and unloading station.Suitable for wood, MDF, solid wood, drywall, cement fiberboard, and boards. Examples: Doors, boards, MDF panels, cabinet fronts, drywall, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed and with a set loading and unloading capacity. This allows you to easily automate your loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel Technical specifications: - Working width 1.300 mm. - Includes belt conveyor, length 3,400 mm - Working height 930 ± 20 mm Ibodoy Iv N Rspfx Acrsa - PLC control, operated via a touch panel, Siemens S7-1200 - 2-circuit vacuum system - Loading and unloading of parts via vacuum suction cups - Special suction cups with position adjustment - 4 additional suction cups to lift the panels 15 mm on one side before vertical movement. - Automatic signal upon completion of the loading process - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 100 kg, continuous operation 85 kg - Max. component width: 1,300 mm - Max. component length: approx. 3,050 mm - Max. conveyor belt speed: infinitely variable up to max. 10 m/min. - Electric motor power: 1.5 kW - Electronic components: Schneider Electronics and Siemens - Weight: 1,500 kg YouTube link:

Year of construction: 2020, condition: good (used), functionality: fully functional, For sale: Farmet FE1000 Clever Max industrial feed / soybean / grain extruder. Manufacturer: Farmet Model: FE1000 Clever Max Year: 2020 Main motor: 110 kW Throughput: approx. 900–2,100 kg/h depending on material and process setup Condition: used, fully functional Location: Slovakia, EU The extruder was used for approx. 2 years. Additional accessories were never used according to seller information. Included: Farmet FE1000 extruder Clever Max control system PLC control with HMI touchscreen Frequency converter for the main drive Stainless steel steam conditioner Cutting head Electrical control cabinet Accessories as shown in the photos Suitable for: soybean extrusion full-fat soybean processing cereal and grain extrusion oilseed meal / press cake processing compound feed production pet food and fish feed applications, depending on recipe and final line configuration The Clever Max control system allows better adjustment of extrusion parameters through PLC/HMI control and frequency regulation of the main drive. This is a strong industrial extruder suitable for medium-capacity feed and oilseed processing plants. Sold as shown in the photos. Inspection possible. Loading possible. Worldwide shipping on request. Iodjxfcwmspfx Acrjba Price: FCA Slovakia, plus VAT. Zu verkaufen: Farmet FE1000 Clever Max Industrie-Extruder für Futtermittel, Soja, Getreide und Ölsaaten. Hersteller: Farmet Modell: FE1000 Clever Max Baujahr: 2020 Hauptmotor: 110 kW Leistung: ca. 900–2.100 kg/h, abhängig von Material und Prozess Zustand: gebraucht, voll funktionsfähig Standort: Slowakei, EU Der Extruder war ca. 2 Jahre in Betrieb. Weiteres Zubehör wurde laut Verkäuferangabe nicht benutzt. Ausstattung: Farmet FE1000 Extruder Clever Max Steuerung PLC-Steuerung mit HMI Touchscreen Frequenzumrichter für den Hauptantrieb Edelstahl-Dampfkonditionierer Schneidkopf Schaltschrank Zubehör wie auf den Fotos Geeignet für Sojaextrusion, Vollfettsoja, Getreide, Ölsaaten, Presskuchen, Mischfutter sowie Pet-Food- und Fischfutter-Anwendungen je nach Rezeptur und Linienkonfiguration. Besichtigung möglich. Verladung möglich. Versand auf Anfrage. Preis: FCA Slowakei, zzgl. MwSt.

Year of construction: 2014, condition: used, functionality: fully functional, byk gardener GmbH, microwave scanning container. Iodezu Ru Eepfx Acrsba

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Gooseneck with rear slope, approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approximately 30 mm thick. Loading platform: Loading platform can be hydraulically raised and lowered after the gooseneck, length approximately 2,800 mm, with rear slope approximately 1,000 mm x 8°. 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings that can be folded inwards on the center beam at the front (LC 10,000 daN). Grid floor C40/4 (point load approximately 2.3 t on an area of approximately 20 x 20 cm) above the axles. Diamond-plate floor. Two-piece steel ramps: One pair of galvanized two-piece steel ramps in reinforced design, approximately 3,185 + 1,420 x 1,250 mm, with grid floor C40/5 (point load approximately 8 t on an area of approximately 20 x 20 cm). Ramp with hydraulically raising and folding ramp sections and hydraulic lifting mechanism, maximum load per pair: 40,000 kg. In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm when in the driving position. Landing gear: JOST landing gear (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Tires: 235/75 R 17.5 3PMSF TPMS tire pressure monitoring system according to ECE R 141 Axles: BPW axles and suspension. 2 axles rigid, 1 axle steered. Technical axle load: 12,000 kg each. Electro-magnetic parking brake via reverse gear and can also be activated manually. Air suspension with raising and lowering valve. Braking system: WABCO braking system according to EU regulations with EBS-E (2S2M). Colors: Semitrailer RAL 3002 carmine red. Rims silver. Tarpaulin in RAL 9006 silver. Including accessories: 1 spare wheel holder under the loading platform on the right in the direction of travel. 2-inch King Pin. One galvanized steel front panel. Yellow-red air couplings on the galvanized connection strip at the front. 4 wheel chocks with holder on the front panel. 3 height-adjustable wooden planks. Ibsdpfx Ajzu Ebtecrja Galvanized folding supports under the slope of the loading platform. Height-adjustable tarpaulin superstructure *3,960 mm*. Galvanized front panel with a tensioning mechanism for the sliding curtains. Roof from EDSCHA, height-adjustable by approximately 400 mm, can be moved forward on aluminum roof rail profiles (screwed to the front and rear walls). 3 pairs of adjustable load securing bars in the loading platform. The superstructure can be widened by approximately 750 mm on the left and right at the rear by hydraulic means. Sliding tarpaulin with approximately 700 mm reserve in length, with lashing straps at intervals of approximately 600 mm. Top edge of the superstructure approximately 3,960 mm (loaded). Driving with an open sliding tarpaulin is not permitted and will result in damage to the tarpaulin. On the diamond plates on the gooseneck and on the loading platform, a sand layer is applied as an anti-slip coating. Cover plates to bridge the gap between the ramps and the loading platform. Electro-hydraulic unit at the rear under the loading platform. On the gooseneck and on the ramps, one holde

Condition: excellent (used), Year of construction: 2003, Hettich Blue Max hinge drilling machine, type: Blue Max 19 - FS Number of spindles per row of holes: 11 Number of horizontal spindles: 5 Isdpszhx D Usfx Acrjba Pot-joint drilling head: yes Drill spacing: 32 mm Clamping device: yes / pneumatic Power consumption: 2.2 kW Stop rulers Accessories: many drill bits (see photos) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2022, Year of manufacture: 2022 Applicable material: Concrete Technical condition: very good Visual appearance: very good Price: On request Manufacturer: Topcon Please contact Ernst van Hek for more information Ibjdpjy E Il Sjfx Acrea Topcon X-53x / MC-Max 3D-GNSS Excavator Kit (2022) – Full Option Specifications: Condition: Excellent, fully tested and operational. Hardware: Current generation GX-75 Touchscreen & MC-X1 Controller. Software: Running stable 3DMC v12.2. Antennas: 2x GR-i3 GNSS Receivers (Dual constellation). Sensors: 6x TS-i3 Tilt Sensors (Suitable for Triple Boom & Tiltrotator). Licenses: Fully unlocked – GPS, GLONASS, Galileo, BeiDou. Comms: Satel Easy Radio & SL100 4G Modem. Complete: Including full wiring harness, mounting plates, and heavy-duty transport case. Purchased directly from the first (German) owner

Condition: excellent (used), Year of construction: 2009, Engel e-max 440/180 / All-electric injection moulding machine Year of manufacture: 2009 Injection unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Shot volume: 220 cm³ Ibjdpezc Nz Isfx Acroa Clamping unit: Clamping force: 180 t Tie bar distance: 520 x 520 mm Platen size: 760 x 775 mm Ejector: electric Clamping system: toggle lever Control system: CC 200 - touchscreen Additional equipment: Machine in very good technical condition, operated in a clean production environment All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 interface Robot interface 3 x air valves Hardened injection unit - bimetallic Parallel movements Central lubrication Automatic mould height adjustment Kistler sensor - mould pressure control Original mould crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87 x 1.42 x 2.00 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests carried out on the selected machine, or to participate in live technical demonstrations at our company in Łódź. Price: On request

Condition: used, mileage: 4,60,000 km, power: 2,299 kW (3,125.77 HP), first registration: 09/2010, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales consultant Internal ID number: [3028] Notice for interested parties: Dear customers, please note that we preferentially sell our vehicles to business customers, dealers, or export clients. ---- Optional services available: * 12–64 months warranty (valid EU-wide) * New inspection service * New MOT & emissions test * Nationwide delivery * Financing possible without down payment ---- * 19% VAT deductible * German vehicle * Regularly maintained * Refrigerated box body * Thermo King V300 Max cooling unit * Digital tachograph * Cooling available when stationary and in transit ---- Leasing or financing required? We offer attractive conditions – also available with no down payment! Please feel free to contact us. Ibodpox S Ubtjfx Acroa Contact: Telephone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 ----Note: All information provided online is non-binding and serves solely as a general description of the vehicle. Errors, misprints, and prior sale excepted. The binding condition of the vehicle is defined exclusively by the purchase agreement signed in person at our premises or by written confirmation. Vehicles with a mileage of over 50,000 km or older than 3 years are preferentially sold to our business customers.

Condition: used, mileage: 4,76,344 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, ABS, ASR, double tank, air conditioning/climate control, fridge, Lane Keeping Assistance, Emergency Brake Assist Iedpfx Ajzq Nb Necrjba