Used Bas 450 Db for sale (7,109)

Condition: excellent (used), Year of construction: 1989, Elektra Beckum Bandsaw BAS 450 DB Dodpfx Apoyy U Txstscl Year of manufacture: 1989 Cutting height: 300 mm Blade length: 3,380 mm Motor power: 1.5 kW Weight: approx. 120 kg Location: ex stock 54634 Bitburg - immediately available - Subject to prior sale

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Djdjzghf Eopfx Aptjcl

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,812 h, functionality: fully functional, product width (max.): 480 mm, product height (max.): 12 mm, product length (max.): 320 mm, TECHNICAL DETAILS Performance (cycles/hour) Speed: max. 14,000/h Wrapping speed: max. 14,000/h Pre-folding: max. 12,000/h Piston opening: max. 12,000/h Offset stitching: max. 12,000/h Dimensions – Width × Spine Length Uncut: max. 320 × 480 mm Uncut: min. 85 × 128 mm Single-up Cut: max. 315 × 475 mm Minimum cut size: 80 × 120 mm Double-up Uncut: min. 85 × 210 mm Trim mark Cut: min. 2 × 64 × 100 mm Product height (compressed) 3-knife cut: max. 12 mm Middle cut as trimming cut: 10 mm Middle cut as punching cut (half punching width): max. 6 mm Triple cut as trimming cut: 5 mm Djdpfszw Ak Rjx Aptecl MACHINE DETAILS Operating hours (according to counter): 14,812 h EQUIPMENT 1 CHU feeder 2 DVU vertical feeders 2 DHU horizontal feeders 1 Stitchmaster three-knife cutting machine with middle cut 2 knife sets 4 stitching heads CHA forklift Note: Further technical details can be found in the attached document.

Year of construction: 2024, condition: new, 2.5 - 6 m Cutting length - 120 - 450 mm max. cutting height - 80 -250 mm cutting width - infeed table with centering rollers - infeed table with log turning device Dodpfx Apjgp Su Ejtecl - saw with 6 - fold width adjustment - draw-out bridge with 2 driven draw-out rollers - Pull-out bridge with 5 pairs of pressure rollers - 650 mm saw blade diameter - 2 x 37 KW saw motors below - 2 x 30 KW saw motors above - 6 saw cuts - 4 KW SEW feed gear motor - 5- 30 m/min stepless feed speed

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T (MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and protective enclosure / Machine in excellent technical condition Year of manufacture: 2017 Injection Unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1984 bar Dcedpfxezy Iiqs Aptel Dosage volume: 226 ccm Clamping Unit: Clamping force: 150 t Tie bar spacing: 510x510 mm Platen dimensions: 740x740 mm Ejector: hydraulic Clamping system: toggle lever Control system: B&R touchscreen Additional equipment: Hybrid machine: high-speed, energy-efficient and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control unit x 36 (available at extra cost) Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor driven by inverter Central lubrication Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Wemo 6-5 xDesign Robot Year of manufacture: 2017 4-axis robot: 3 axes driven by servo motors (electric) Safety package for robot Robot with adapter, Wemo WCS-R conveyor belt and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10x1.97x2.60 m Drive: Pump/Motor: 11.5 kW Heating power: 11.3 kW Total power: 22.8 kW All machines offered are commissioned by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to take part in live technical tests at our company in Łódź. Price: 25,000.00 EUR

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, RÜHLE GFR 450 | Guillotine for frozen meat blocks / guillotine slicer Manufacturer: Rühle GmbH Model / Type: GFR 450 Serial number: 60010525 Year of manufacture: 2016 Power supply: 400 V / 50/60 Hz Power: 7.2 kW Rated current: 12.3 A Dimensions: 2270 x 710 x 1350 mm Estimated weight: approx. 400 kg Maximum block / portion size: 400 x 200 mm Cutting temperature of raw material: Up to -18 °C Dcjdpfxszxudfe Aptol The RÜHLE GFR 450 is a professional, industrial guillotine for frozen meat, designed for the initial shredding and cutting of frozen meat blocks, fat blocks, cheese blocks, and other food raw materials without the need for prior thawing. The device efficiently cuts chilled and deep-frozen raw materials at temperatures as low as -18 °C, which helps maintain a continuous cooling chain, prevents leakage of cellular juice, and reduces the loss of raw material mass. The compact and extremely robust design of the GFR 450 model has been designed for continuous operation in the demanding environment of the food processing industry. The use of a powerful 7.2 kW drive, combined with a durable guillotine knife assembly, allows for quick and even shredding of blocks up to 400 x 200 mm into smaller portions, perfectly prepared for further processing in grinders, cutters, or mixers. The device is ideal for butcher shops, meat processing plants, fish processing plants, catering facilities, and the industrial production of ready-made meals.

Condition: excellent (used), Year of construction: 2016, operating hours: 13,100 h, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: TNC 620, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 3-axis machining center Manufacturer: Spinner Type: VC-450 Year of manufacture: 2016 Control system: Heidenhain TNC-620 Operating hours: approx. 13,100 h Serial number: BV XXXX Technical parameters: ----- • Travel ranges X-Y-Z: 450 x 400 x 400 mm • Work table 770 x 410 mm • Max. workpiece weight: 200 kg Dcsdpfx Aozytzfoptsl • Spindle: 15,000 rpm • Tool magazine: 24 x HSK-A63 • Coolant system 20 bar including internal coolant supply, bed flushing, ..paper band filter with 300L additional tank volume • LED work area lighting • Oil mist extraction • 3D touch probe • Chip conveyor • Machine weight: approx. 3.5 t • Dimensions: 2,400 x 1,700 x 2,500 mm Accessories: ----- • Documentation

Condition: used, Year of construction: 2009, machine/vehicle number: 4006, functionality: fully functional, year of last overhaul: 2023, Equipment: documentation/manual, We are offering this used Riedex MD-450 stationary dust extraction system, manufactured in 2009, including the air filter unit. Dcsdpfezxfrmjx Aptjl Manufacturer: Riedex Model: MD-450 Year of manufacture: 2009 Condition: used Category ID: 1413 Type ID: 586 Type: stationary dust extraction system If you have any questions or would like more information, please send us a message or call us. The machine is still in working order. You will be responsible for dismantling it.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). The machine is used for surface processing of metal parts up to 450 mm wide. Dcodpfx Apjyn E H Retel The dust collection container with filter fleece is located underneath. The machine is in good, partially overhauled condition. Further technical information can be found in the documentation.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, cutting height (max.): 110 mm, For sale: a Forma DZ 4 - 450 multi-blade saw with four positionable saw blades equipped with lasers. Each blade is driven by its own 11 kW motor. Maximum timber thickness: 110 mm. Board length: up to 6.0 meters. Djdpfxezul Dnj Aptjcl The set also includes an infeed roller table and an outfeed roller conveyor with side ejectors.

Condition: used, Year of construction: 2022, total width: 1,800 mm, total height: 1,900 mm, total length: 1,800 mm, overall weight: 3,000 kg, Hydraulic briquette press Manufacturer: Winter Type: BP 450 Year of manufacture according to nameplate: 2022 Technical data: Capacity max. 450 kg/h Motor 35 kW / 400 V, 50 Hz Chip compression min. 1,000 kg/cm² max. 1,500 kg/cm³ Wood moisture < 14 % Briquette dimensions: Length 150 mm, Width 60 mm Dimensions L x W x H: 1,800 x 1,800 x 1,900 mm Weight 3,000 kg Purchase price net € plus applicable VAT. VAT will be shown separately on our invoice. Subject to changes, errors and prior sale. Sale is made without warranty and guarantee, and only to business customers. Dsdpfxozxlzno Aptocl Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Kaltenbach KKS 450 U metal cutting circular saw (2021) Manufacturer: Kaltenbach Type: KKS 450 U Year of manufacture: 2021 Condition: used, very good Clamping, sawing, retraction, opening – all easily controlled with the push of a button Dcjdpfx Apjzwhwvstjl Semi-automatic miter circular saw Working range 150 mm Saw blade diameter up to 450 mm Miter adjustment 180° Adjustment of the cutting height via push button Two cutting speeds Scope of delivery: - Documentation - 2m infeed roller conveyor - 2m outfeed roller conveyor with digital material stop - 2x saw blades

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 450 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 450 cm - Depth : approx. 110 cm - Length : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR45 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, disassembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 10.900,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Dcjdpfx Aszy H I Ejptsl Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer - Paints and dispersions - Resins and comparable application media Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Technical data and equipment Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels Dedpfxozr H Aao Aptjcl CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.

Year of construction: 2023, condition: excellent (used), Number of NC axes: 4 X-axis: 7200 mm Maximum tool length: 190 mm Dcsdpfx Apozycltstjl Number of tool positions in the tool magazine: 12 Number of clamping mandrels: 8 Number of fixed stops for profiling: 4 Clamping block positioning: Automatic Maximum profiling height: 300 mm Motor power: 7.5 A-axis: +/-90° continuous

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Tool presetting machine Zoller Venturion 450 Image processing software ‘Pilot 3.0’ Year of manufacture: 2016 Internal machine number: 48 Precisely set and automatically measure tools of all kinds. Measuring range Z / Measuring range X 450 / 620 / 820 mm / 210 / 310 mm Dcjdpfxezwt R Is Aptjl Max. tool Ø / Tool holder Ø 420 / 620 mm / 100 mm Adapter for SK 40 / VDI 40 / VDI 50 Includes computer and printer Graphical, self-explanatory user interface, quick access to features, large click and touch areas, photo-realistic input dialog, dynamic crosshairs, self-explanatory function keys, automatic cutting tool recognition, automatic zero point monitoring, brilliant, precise display and inspection of cutting edges, tool and adapter management, tool identification, test protocol output, data transfer to machines and interfaces to external systems, and many other functions.

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: Dcjdpfx Asywtxbsptjl ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Year of construction: 2026, condition: excellent (used), functionality: fully functional, BMD-1000-2-N METAL DETECTOR Dcsdpfxozmnwno Aptsl 1000MM CONVEYOR WIDTH APPLICATION SENSITIVITY ADJUSTMENT FOR METAL DETECTION RIVET SENSOR ADAPTATION FEATURE AVAILABLE VISUAL AND AUDIBLE WARNING CONTROL BOARD INCLUDED

Year of construction: 2022, condition: used, Cutting capacity at 60° right round/square/rectangular: 160mm/150mm/150mm×270mm, max. miter range left/right: 60°, saw blade dimensions X/Y/Z: 4250mm/34mm/1.1mm, max. blade speed: 100m/min, max. vise opening: 450mm, saw blade motor: 2.2kW, working height: 845mm. Machine dimensions X/Y/Z: approx. 1400mm/2000mm/2180mm, weight: approx. 990kg. Including micro-spray system and roller conveyor. Documentation available. An on-site inspection is possible. Dcedpezxhlpsfx Aptsl

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, nominal power (apparent): 45 kVA, electrical fuse: 15 A, working range: 50 mm, open-circuit voltage: 28 V, nominal power at 50% duty cycle: 45 kVA, We offer this refurbished IDEAL BAS 050-11 butt welding machine, year of construction 1998. type: BAS 050-11 serial number: 224085 year of manufacture: 1998 year nominal power at 50% ED: 45 kVA rated apparent power: 45 kVA Dcsdpfx Apozudivjtol no-load voltage: 28/44 V max upsetting force: 250 kN primary voltage: 400 V rated frequency: 50-60 Hz fuse rating: 15 A Bi-metal / carbide bandsaws: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Strip blades: 6×0.4 – 30×0.6 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 400 mm turning length - mm control DMG Mori SLIMline z-axis ca. 750–755 mm x-axis 276 mm y-axis +/-60 mm greates pass round over bed 700 mm Additional information The machine is in very good condition and has recently been inspected and measured by a service technician. The lathe was primarily used to manufacture turned plastic parts. CNC lathe with driven tools, C-axis, Y-axis, and counter-spindle CNC control: DMG Mori SLIMline multi-touch control (19"/Operate 4.7 on Siemens) Screen language: German/English Main spindle: A2-8 with AC motor Drive power 25.5/17 kW (100/40% duty cycle) Spindle speed 4000 rpm Hollow clamping system, max. bar capacity 80 mm Counter-spindle: A2-6 designed as a built-in motor spindle ISM 52 with hydraulic clamping device Drive power 14/13 kW (100/40% duty cycle) Spindle speed 5000 rpm 12-station servo tool turret: VDI 40 mount with 12 driven tool stations Equipment: Y-axis +/- 60 mm Direct position measuring system (X and Y axes) Bar package & interface Dedpfszu Nxpox Aptscl IEMCA KID80/16 short bar loader, bar capacity 80 mm Differential pressure clamping for main spindle Chuck flushing for main spindle Reduction tube for main spindle Hainbuch SPANNTOP nova Combi G80 Axzug collet chuck Differential pressure clamping for counter-spindle Chuck flushing for counter-spindle Automatic workpiece ejector Counter-spindle with internal coolant supply for workholding flushing SMW BB-D210 hydraulic 3-jaw chuck for counter-spindle SMW BB-D250 hydraulic 3-jaw chuck High-pressure pump 12 bar Coolant spray gun bar Dual cartridge filter for coolant, filtration fineness 60 µm Manual tool measuring device in the workspace, Marposs make Tool monitoring system, Easy Tool Monitor 1.0 technology cycle Alternating Speed ??technology cycle 3D data model in STEP format DMG MORI Messenger V2 DMG MORI Netservice – client Finished part discharge conveyor Chip conveyor with right-hand discharge External electronic handwheel Tool holder package

Condition: excellent (used), mileage: 9,54,044 km, power: 331 kW (450.03 HP), first registration: 01/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of beds: 2, Year of construction: 2015, Equipment: ABS, AdBlue, central locking, electric window regulation, fridge, parking air conditioner, parking heater, power mirror, retarder, second fuel tank, spoiler, = Additional options and accessories = - Intarder Dcjdpey Dcv Asfx Aptol - Radio/CD player - Spoilers - Sun visor = More information = Cab: single Number of cylinders: 6 GVW: 19.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: SB21STB = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2026, Gannomat hinge boring and hardware insertion machines are hardware manufacturer independent and designed for the precise drilling and insertion of hardware. Robustness, durability and ease of use distinguish our universal hinge drill machines. Short introduction: • Independence from hardware distributors and manufacturers • Precision drilling unit with steel gears and steel clutch Dcodpodx Axuefx Aptol • Universal application: hinges, row of holes as well as line drilling, connectors and fittings, handle and through holes, holes for drawer slides, ... • Massive and stable tilt stops • Distance from the front stop to drilling spindles up to 300 mm (Basica Variabel)

Condition: used, Year of construction: 2011, cutting width (max.): 4,300 mm, air demand: 4.45 m³/h, cutting diameter: 75 mm, Biesse Sektor 450 K1 - 4.300 x 4.400mm Description Cutting length 4300 mm. Pusher beam stroke 4400 mm. Main saw motor 7.5 Kw. Main saw blade diameter 355 mm. Maximum blade projection 75 mm. Clamp finger opening 65 mm. Scoring unit motor 2.2 Kw. Scoring unit blade diameter 200 mm. Max. speed saw carriage 1 - 120 m/min. Max. speed pusher bar 60 m/min. Max. speed pusher bar forward CE 25 m/min. Maximum stroke of the side pressure 2900 mm. Number of clamping fingers 7 Dimensions of air support tables 050x620 mm. Number of support tables 4. Extraction 100 + 100 + 150 mm. Air velocity 30 m/sec Air volume 3600 m3/hour. Automatic board measuring on Manual cuts and, with OSI Plus option, on Sequences programs Push button for remote control start cycle, complete with emergency stop button. Basic electronic label printer Label printer support stand OS-Labelling - Graphic labeling on the machine with part drawings. QUICK OPTI software for optimization of cutting patterns. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland Djdpfx Apozqcrzstocl

Condition: used, Year of construction: 2023, cutting diameter 450 mm saw band length 6600 x 41 x 1,3 mm table height 800 mm 450 mm 450 mm 450 x 270 mm workpiece weight 15 - 95 m/min 7,5 kW work height max. 3000 kg connected load 3750 x 1400 x 2100 mm NEW PRICE ~ 40.700 EURO very good condition Semi-automatic bandsaw, two-column guided Equipment: - hydraulic vice - infinitely variable cutting speed - chip conveyor - line laser - driven chip brush Dcodpfxoytx Sqj Aptel - coolant device - operating instructions