Used Scarf Tight Mature for sale (808)

Condition: used, Year of construction: 2023, functionality: fully functional, Technical Details: Produces all shapes of Reinforcement steel Profiles Thickness 0.50-3 mm Bandwith max- 200 mm Production Speed: max. 15-20 mt/minute Width min- 22 mm max- 60 mm Depth min- 5 mm max- 60 mm Square Shape Max: 50 mm x 50 mm Square Shape Min: 20 mm x 20 mm Loading capacity of decoiler is max. 1000 kg. Decoiler: • Decoiler is manual system with brake lining. • Bandwidth capacity 300 mm. • Max. Coil inside diameter 550 mm. • Max coil outside diameter 1500 mm. • Tightening roll hub by mechanical ROLLFORM MACHINE: The machine has 14 stations to bend sheet step by step. • Shafts and pulleys manufactured from high-quality materials (4140) according to the techniques and reach hardness of 50-55 HRC. • Shaft diameter: 52 mm. / Bearing brand: SKF • The drive gears in each pulley of the stations are made of blister steel (8620) and reach hardness of 50-55. • The reductor is used in a drive system. The main body consists of gearbox and two blocks. Spacers on the rollers can be changed manually according to the dimensions of the profiles. • There is calibrating machine that comes after the roll forming machine to get the required flatness, linearity and twist. • Reducer and helical gears will be used in drive system. • There will be 18,5 kW engine with reducer in the form unit. • Motor brand: GAMAK / Reducer brand: YILMAZ / ÖZTEKFEN / POLAT You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Cutting is done with Flying Circular Saw. • The disc will be moved from down to up. • Length tolerance will be maximum +- 5 mm. • Saw motor will be 5,5 kW. SECOND CUTTING EQUIPMENT: You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Only U profiles can be cut with the hydraulic guillotine. • Cutting is done with Hydraulic Guillotine. • Length tolerance will be maximum +-5 mm • The cutting mold material will be 2379 steel. • Hydraulic unit tank: 40 Liter. • Hydraulic unit motor: 3 kW • Hydraulic motor brand: GAMAK / ELK Hydraulic parts brand: TEK HİDROLİK STACKING TABLE: Stacking table will be with pneumatic discharge system and conveyor. • There will be 1 kW engine on the run-out table. Njdoxm Rq Repfx Aansdf CONTROL SYSTEM: All parts of the electrical panel are made of first quality materials. (SIEMENS, SCHNEIDER, ABB etc.) • Production line will use 380v +/-%10, and 3 phase 25 kW of electrıcity and compressor with capacity of 6 bar and 500 liters. • You can cut the profiles of any length you need by only entering the parameters to the control panel. The PLC parameters include “jog speed, production pieces, actual pieces, manual and automatic productions settings, calibrating setting vs.”. PACKING EQUIPMENT: • The production line includes 2 pieces packing machine for metal strips. • Manual packing machine can make locked to metal strips for profile package.

Condition: used, functionality: fully functional, power: 28 kW (38.07 HP), gearing type: hydrostat, fuel type: diesel, overall weight: 3,800 kg, operation weight: 3,800 kg, lifting power: 1,500 kg/m, lifting height: 2,700 mm, tire size: 11,5/80-15,3, axle configuration: 4x4, digging bucket width: 1,600 mm, Year of construction: 1994, operating hours: 4,340 h, machine/vehicle number: 4240120, Equipment: 4 in one shovel, additional headlights, all wheel drive, cabin, differential lock, pallet forks, A small yet powerful Liebherr wheel loader. The loader has an operating weight of approximately 3.8 tons, a dump height of approximately 2.30 meters, and a lift capacity of approximately 1500 kg on level ground. The small turning radius of the all-wheel-steered wheel loader allows it to work even on the tightest construction sites. Despite its older model year, the loader has only 4,300 hours on the clock and is in good used condition. The reliable Deutz diesel engine starts reliably even in colder temperatures. The engine and hydraulic pump have sufficient power and are dry. All bearings have very little play. TECHNICAL DATA: * Manufacturer: Liebherr * Type: L504 * Year of manufacture: 1994 * Operating hours: approx. 4,340 hours * Engine: Deutz diesel engine F3L1011 * Power: 28 kW (38 hp) at 2,500 rpm * Drive: hydrostatic all-wheel steering * Oscillating rear axle with a maximum tilt of 10 degrees * Brakes: hydrostatic / mechanical * Travel speed: continuously variable * 1st gear: 0-5 km/h * 2nd gear: 0-20 km/h * High and low gears * Turning radius with bucket: 3,580 mm * Kinematics: single parallel * Digging depth: 42 mm * Back/dump angle: 41 / 40 degrees * Ground clearance: 265 mm * Limited-slip differential: automatic * Lifting capacity: 32.5 kN * Breakout force: 24 kN * Tipping load: 2450 kg * Payload with fork (flat terrain): approx. 1500 kg * Dumping height at a 40-degree dumping angle: approx. 2.32 m * Max. height (bucket pivot point): approx. 2.90 m * Max. height (bucket top edge): approx. 3.64 m * Dumping range: 575 mm * Stacking height: approx. 2.70 m * Tires: Pneumatic tires * Front tires: 11.5/80-15.3 * Rear tires: 11.5/80-15.3 * Incl. pallet fork * Incl. 4-1 bucket * Incl. joystick lever with floating position * Incl. mechanical quick-change system * Incl. complete lighting system * Incl. heating/ventilation * Incl. front and rear window wipers * Incl. ROPS/FOPS cab * and much more * Maximum axle load (axle 1): 2500 kg * Maximum axle load (axle 2): 3000 kg * Maximum gross vehicle weight: 4000 kg Ndedpsv Su Izjfx Aansf * Total length (incl. bucket): approx. 4.45 m * Total width (incl. bucket): approx. 1.60 m * Total height: approx. 2.46 m * Dead weight: approx. 3800 kg * Serial No.: 4240120 You are welcome to inspect this and all other equipment by appointment, test it on-site, or take it for a test drive. If you have any questions about our machines, please feel free to contact us.

Condition: excellent (used), Precision grinder for cutting ejectors to size and grinding fronts Grinder features: A precise device enabling semi-automatic cutting of ejectors to size and grinding fronts in one clamping The grinder can be adjusted during operation The belt tension can be adjusted and controlled automatically (the greater the resistance, the tighter the belt) Grinder for cutting ejectors and grinding fronts Grinder for cutting ejectors and grinding fronts Manufacturer code 100 Grinder parameters: Ndjdpfx Aajvyuw Ssnsf Motor power - 0.735kW Max. speed - 3 600 rpm Diameter range - ⌀1-25 mm Maximum length - 300 mm (optionally 500 or 600 mm) Length tolerance for ⌀25x300 mm: +/- 0.01 mm Dimensions LxWxH: 430x360x500 mm Weight - 109 kg Link to the video on YouTube:

Condition: ready for operation (used), 20-ft. Container Condition: Used, Cargo worthy, 12 months valid CSC, Wind-and watertight, Free on Truck Depot HAMBURG Nedpfxog Sxkge Aanjdf

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 3 kg, first registration: 11/2025, fuel type: gasoline, gearing type: mechanical, TITLE: USED OPEN-TOP ROLL-OFF CONTAINER FOR BULKY WASTE, WATERTIGHT, WITH SINGLE REAR FOLDING DOOR, NEW FLOOR PLACED ON 200 MM BEAMS, FRESHLY PAINTED REF: 25-U-151 TYPE: Bulky waste NEW: No COVER: No OPENING: Rear, single folding door DIMENSIONS TOTAL EXTERNAL LENGTH: 6.25 m EXTERNAL BODY WIDTH: 2.50 m FRONT SIDE HEIGHT (INTERNAL / EXTERNAL): 2.25 m / 2.45 m REAR SIDE HEIGHT (INTERNAL / EXTERNAL): 2.25 m / 2.45 m Nodpoxlltdefx Aansdf SIDE HEIGHT (INTERNAL / EXTERNAL): 2.25 m / 2.45 m CAPACITY: 32 m³ WEIGHT: 3000 KG FLOOR THICKNESS: 5 mm WALL THICKNESS: 4 mm COLOUR: Green RAL 6029 Subject to errors and/or omissions. Displayed prices do not include VAT. Please contact our sales department for an updated quotation and terms. For more information: Loris: +39 348 477 3001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA Specialists in the sale and purchase of industrial and commercial vehicles, primarily focused on the waste management sector. Experts in trucks, trailers, and roll-off equipment. We have over 50 trucks and more than 150 containers, including roll-off containers with and without cranes, available for immediate delivery. E.&O.E. Given the number of listings and details provided, Aurora encourages you to verify data accuracy with our sales staff.

Condition: used, Year of construction: 1997, functionality: fully functional, Production line for packing, blending, filtering and homogenizing of dry products from 2 manufacturers - D.H.T. van den Dikkenberg and BTH (Premier Tech). All dairy powder and powders of plant origin can be used, such as milk powder (SMP/WMP), whey powder, buttermilk powder, powder of milk permeate, lactose, dextrose, whey protein/fat concentrates, FFMP, soy protein, pea flour etc. The number of blended ingredients is unlimited. The line is suitable for both food and feed purposes and has a producing capacity of 3mt per hour. The line for the production & packing of dry blends: - meets the requirements for materials in contact with food products; - is made of durable materials that don't change the smell and taste of food products, don't absorb moisture, are corrosion-resistant and safe to use; - all surfaces are resistant to repeated exposure to cleaning/disinfecting agents; - is designed and manufactured in such a way that there are no cavities inside in which the processed products accumulate, and this wouldn't create conditions for contamination of the manufactured products; - is mounted in two 40 foot containers, which ensures easy transportation of equipment. The production line has the following units: 1) two-stage filtering of the poured raw materials through coarse and fine sifting sieves Ndsdpfx Aswhf Ddjansf First, the raw materials are sifted through a sieve with eyes of 5 mm in diameter. At this stage, foreign impurities and hardened particles over 5 mm are separated. After that, the raw materials are sifted through a second sieve with eyes of 0,2 mm. In this way, all foreign particles over 0,2 mm are completely separated from the raw materials. 2) mixing of components into a homogeneous blends The mixing process in a horizontally located mixer is very gentle. The blended ingredients remain undamaged and retain their structure, which is very important for the products of instant category. 3) dosing of finished products into bags The line is equipped with a dispenser, which is technologically connected to automatic scales. It allows to select and set the desired volume of the packed product. Standard packaging options are bags of 20-25 kg net. 4) suction of excess air An integrated vacuum unit helps to suck out of the filled bags an excess air. The product becomes denser, less airy, and when stacking the bags on the pallets, the entire structure becomes more stable. This is very important for the safety of the cargo during transportation. 5) heat-sealing of the inner poly liner The line is equipped with a heat-sealing unit (BTH BV), which is used to seal the inner poly liner. Sealing the liner ensures its tightness, which helps to prevent the moisture penetration into the finished product. Since the powder is very hygroscopic product, its reliable protection from moisture is very important for preserving the quality of the manufactured products. 6) sewing of paper bags with/without crepe paper The line also has an integrated sewing unit (sewing head - Fischbein SA) for closing of the paper bags. For more reliable tightness of the packaging, a crepe paper tape in the same colour as the bag may be used additionally. The line is equipped with 3 bunkers with a capacity of 1mt each: 1) raw material blending bunker 2) product settling bunker after blending 3) finished product bunker The line has a high production efficiency and very easy maintaining and operation.

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chucks: Ø 5-16 mm -Tightening thread: M16 x 1.5 Ndodpfx Asb A R Ngsanof -Dimensions: See drawing in the images -Weight: 2 kg

Condition: used, mileage: 1,01,046 km, power: 62 kW (84.30 HP), first registration: 07/2012, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, next inspection (TÜV): 08/2024, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2012, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI is a reliable van that offers more environmentally friendly transport solutions thanks to its EURO-5 emissions class. Equipped with a 2.0-litre diesel engine, it delivers 62 kW (84 hp) and has a five-speed manual transmission. With a mileage of 101,046 km, this vehicle offers a solid combination of performance and fuel efficiency with an average consumption of 7.2 litres per 100 km. The two side sliding doors and truck registration ensure high functionality and flexibility in daily use. Nsdpfx Astfbh Asanjdf The safety features of the T5 Transporter are equally impressive. The front-wheel drive offers good roadholding, while the Parktronic function makes maneuvering in tight urban areas easier. The interior offers space for up to three people, and the practical wood lining in the cargo area promotes durability. The dimensions of the vehicle are 4,892 mm in length, 1,904 mm in width and 1,970 mm in height, which allows for a generous loading space. The vehicle is painted in an attractive broom yellow and was previously owned by a previous owner. With a total weight of up to 2,800 kg, this van is ideal for commercial operators or for export. The general inspection is valid until August 2024 and a registration service including delivery for an additional charge within Germany is offered. A viewing is possible at any time without prior appointment, which offers flexibility for potential buyers. Sale only to commercial operators (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 28,996 km, power: 235 kW (319.51 HP), first registration: 04/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Sun visor, manoeuvring light at the entrance, 2x rotating beacons on the driver's cab, differential lock, comfort seat with air suspension, rear view camera, emergency brake assistant AEB, lane change warning, DAB radio, infotainment system with 7?? touch display, 4-seater drum V2A 1.4301 with 4 mm wall thickness, liquid-tight (therefore suitable for organic waste), two-speed conveyor screw, sandwich construction noise-reduced, lubrication system, OmniDEKA chute, 4-wheel MGB with flat lid and sliding lid, 2-wheel MGB according to EN 840/2, Ndodpfxevbnypo Aanjf

Condition: new, maximum load weight: 30,015 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer K.STN L 30 stainless steel tank trailer 30m³ for liquid manure TECHNICAL INFORMATION: External length 9,180 mm * Height (empty vehicle) 3,960 mm * Axle distance 5,000 mm * Rear overhang 3,050 mm * Fifth wheel height 1,320 mm * Tank diameter 2,200 mm TECHNICAL DIMENSIONS: Volume 30.0 m3 * Empty weight 6,045 kg * Axle capacity is 27,000 kg * Kingpin capacity of the fifth wheel load is 12,000 kg * The operating temperature is 80°C * Test pressure (+H bar) 0.5 bar * Total weight 39,000 kg TANK: Cylindrical tank container, with a slope to prevent residual quantities in the tank, made of AISI 304 (DIN 1.4301) stainless steel * Number of manholes 1pc. * Manholes size DN450, 4 x nut tightening with hinged dome cover * Aluminium walkway * Access ladder on the left side of the tank * 1 x 5 M hose holder, large aluminium box open at the top * Straight flange as preparation for cleaning pipe * 1 x 8" pipe with flange at the top of the rear of the tank, for discharge by suction * 1 x 8" pipe with square flange at the front right of the tank, as preparation for a filling indicator * 6" preparation for a ventilation line * Preparation for pressure valve * Preparation for vacuum valve and vacuum DISCONNECTION SYSTEM: A transparent pipe made of hard plastic with a diameter of 4" is included at the rear in order to be able to read the level of the transported goods in the tank from the outside * 1 x 8" plastic filling funnel in front of the suction line at the top of the rear of the tank * Börger FL1036 hydraulically driven pump with carbon steel housing * When discharging with the pump, a 6" Perrot coupling with hook closure, which is used on slurry vehicles, is attached to the outlet line. * The outlet of the outlet line is equipped with 1 manually controlled 6" brass slide valve * At the inlet of the mixing line in the tank there is 1 x 4" pneumatically controlled gate valve. 1 x pneumatically controlled 8" slide valve made of brass at the inlet of the tank suction line * 1 x 6" pneumatic vent valve with brass slide * When unloading with a pump, there is a 6" swivel joint to be able to run the discharge line outlet at the rear of the vehicle from left-right-middle * 2x6" pneumatic slide valve DRIVE: Chassis is made of a special aluminum alloy that offers high quality and high strength * BPW axles 3x9 tons with air suspension and disc brakes * 1st axle can be lifted * Aluminum supports * Tires 385/65 R 22.5" * Aluminum rims * KNORR-ILVL electronic air suspension ECAS Njdpfsun Em Nox Aanjdf OTHER: 1 x bracket suitable for connecting a pump, welded to the frame underrun protection mat in accordance with the regulations COLORS: Color of the chassis MB 7350 Nova gray (glossy) * Color The container RAL 9005 black Painting of the tank in BLACK The photos may show different equipment. The text of the construction description is binding!!!

Condition: new, functionality: fully functional, power: 41 kW (55.74 HP), fuel type: diesel, operation weight: 2,961 kg, Year of construction: 2025, Equipment: UVV, rubber tracks, The Bobcat® T450 Compact Track Loader sets new standards for compact equipment. Its outstanding maneuverability allows it to operate even in the tightest job sites, all while delivering convincing performance. The T450 truly shines on tasks at medium heights—such as dumping over walls, backfilling, or unloading trucks—demonstrating its full capabilities with a precise radius lift path. A true powerhouse for demanding operations! - Reversing alarm - Power Bob-Tach™ - 3rd hydraulic circuit - 300 mm wide rubber tracks - Pressurized deluxe cab - Operating weight: 2,961 kg - 41 kW Bobcat diesel engine (Stage V) - Warranty: 24 months or 2,000 operating hours, whichever comes first This offer is non-binding, with no guarantee for equipment specifications. Subject to errors, changes, and prior sale! Ndedpfx Aasw Hcbwensf Ref.: 70

Condition: new, Year of construction: 2025, Q15E25 Electric Mast Stacker – Performance, Precision, and Safety in Any Environment Ndjdpfjx Dk A Usx Aanof The Q15E25 electric mast stacker is an innovative machine that combines advanced technology with exceptional efficiency. With a lifting capacity of 1500 kg and a maximum lifting height of 2500 mm, the Q15E25 ensures reliability and precision in material-handling operations across warehouses, distribution centers, and various logistics environments. Its compact design allows the stacker to move through narrow aisles and standard doorways, making it an ideal solution for workspaces with limited room. Key Advantages of the Q15E25 Stacker 1500 kg lifting capacity – ideal for transporting medium-weight loads, making the stacker an excellent tool for warehouse and distribution operations. 2500 mm lifting height – allows convenient lifting of loads to the required height, increasing operational efficiency in various industries. Compact dimensions – with an overall height of only 1830 mm, the machine easily maneuvers through narrow spaces, making it highly versatile. Polyurethane wheels – offer quiet operation, low rolling resistance, and high wear resistance, ensuring smooth performance on various surfaces. User safety – equipped with an emergency stop button, a “belly” safety switch, and an LED battery charge indicator for operator protection and reliable performance. Construction and Technology Designed for intensive use, the Q15E25 features a 0.75 kW drive motor that ensures strong and smooth movement, while the 2.2 kW lifting motor provides fast and precise load handling. The machine is powered by two 12V 75Ah batteries, delivering long working time on a single charge. The built-in charger allows convenient charging anywhere, eliminating downtime caused by long charging intervals. Precision and Work Efficiency The Q15E25 offers exceptional precision thanks to a speed controller that allows adjusting travel speed to workplace conditions. The “turtle mode” enables extremely precise maneuvering in tight areas. Electric lifting and lowering control provides full handling accuracy, significantly improving safety and productivity during daily operations. Standard Equipment Q15E25 electric mast stacker with powered drive and lifting Built-in charger Emergency stop and belly safety switch Polyurethane wheels “Turtle mode” low-speed maneuvering function Technical Specifications Parameter Value Max lifting height 2500 mm Lifting capacity 1500 kg Load center 600 mm Fork length 1150 mm Fork outer width 550 mm Height with lowered forks 1830 mm Height with raised mast 2950 mm Lowered fork height 85 mm Overall width 790 mm Overall length 1800 mm Ground clearance 30 mm Turning radius 1390 mm Travel speed (loaded / unloaded) 3.5 / 4.0 km/h Lifting speed (loaded / unloaded) 100 / 200 mm/s Lowering speed (loaded / unloaded) 120 / 100 mm/s Gradeability (loaded / unloaded) 3% / 10% Service brake type Electromagnetic Drive motor power 0.75 kW Lift motor power 2.2 kW Battery capacity 12V 75Ah × 2 Wheel material Polyurethane Weight 460 kg

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: Njdpfx Aajmhfrrenedf - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: used, mileage: 1,13,416 km, power: 78 kW (106.05 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, total length: 6,783 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, soot filter, The Iveco Daily 35 S11 C30C is a used transport vehicle specifically designed for commercial use. With an initial registration date of May 21, 2012, it has a mileage of 113,416 km. The van is powered by a 2,287 cc diesel engine producing 78 kW (106 hp). As a Euro 5 vehicle, it is equipped with a green environmental sticker and has an automatic transmission. The yellow metallic paint gives the vehicle a striking appearance. The vehicle is equipped with a variety of practical features that make it ideal for transport use. These include a large box body, built-in shelving, and air suspension on the rear axle, which provides improved driving stability. A rearview camera facilitates maneuvering in tight spaces. The Iveco Daily also features a jump seat, allowing for the transport of additional personnel. Ndsdpfsumxk Sex Aanof The vehicle's dimensions are generous, with a length of 6,783 mm, a width of 2,177 mm, and a height of 2,770 mm. The wheelbase is 3,750 mm, and the vehicle has a gross vehicle weight of 3,500 kg. Viewings are possible without prior appointment, and delivery within Germany is possible for an additional charge. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: new, functionality: fully functional, Year of construction: 2025, KDP1000 Cabinet Sandblaster – Industrial Sandblasting Cabinet for Wheels, Structures, and Metal Components The KDP1000 cabinet sandblaster is an advanced machine designed for intensive industrial use in automotive, shipbuilding, aerospace, and commercial service environments. Its impressive 1000-liter tank capacity and spacious 850-liter working area allow processing of large components—from wheels and rims to housings and heavy structural parts. High build quality and reliability make the KDP1000 a professional metal sandblasting solution for the most demanding users. Key Advantages of the Machine Large 1000-liter working capacity – ideal for processing oversized components. Dust-free operation thanks to tight perimeter seals – protects both the environment and the operator. Closed-loop system – minimizes dust emissions in the workplace. Efficient DC15 cyclone dust extractor included – ensures effective removal of abrasive particles. Supports various abrasives: corundum, glass beads, quartz sand, emery. Easy abrasive replacement – thanks to a built-in drain at the bottom of the tank. Complete equipment package: gloves, handheld gun, fixed gun, and air-blow gun. Construction and Technology The KDP1000 sandblasting cabinet is engineered for heavy-duty operation. Its robust powder-coated steel construction ensures resistance to abrasion and environmental factors. The enclosure is easy to maintain, and the sealed working system significantly reduces dust emissions, increasing operational safety. The hose-based blasting system located at the bottom of the tank ensures stable abrasive flow. The large working area and convenient access to the cabin enable efficient handling of workpieces and optimal use of the workspace. Precision and Work Efficiency A working pressure range of 4–8 BAR allows adjustment of blasting intensity according to the surface type and condition. Powered by 230V and equipped with a reliable pneumatic system, the KDP1000 cabinet sandblaster ensures consistent, repeatable results. Built-in lighting and a wide viewing window provide excellent visibility and control over the cleaning process, even in hard-to-reach areas of the workpiece. Ndjdpfx Aajx Dkx Nensf Applications The KDP1000 model is widely used in various industrial and service sectors. It is ideal as: Wheel sandblaster – restoration of steel and aluminum rims, Surface preparation tool before powder coating, welding, galvanizing, Metal sandblaster – removal of rust and coatings from steel profiles, fittings, and structural components, Equipment for cleaning engine parts, housings, casings, suspension components, and mechanical details. Standard Equipment 2 integrated rubber work gloves Handheld sandblasting gun Fixed internal blasting gun Air blow-off gun 7 ceramic nozzles DC15 cyclone dust extractor Technical Specifications – KDP1000 Cabinet Sandblaster Parameter Value Working pressure 4–8 BAR Capacity 1000 L Abrasive media corundum, glass beads, sand Working area 850 L Power supply 230 V, 50 Hz Weight 149 kg Internal cabin dimensions (W × D × H min/max) 1120 × 900 × 420/820 mm Overall dimensions 1270 × 1000 × 1800 mm

Condition: reconditioned (used), Year of construction: 1987, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1987 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-3429 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes Ndjdpfxshtrd Io Aanef - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Central lubrication, electric - Operating instructions - Used as seen -

Condition: new, Year of construction: 2025, Characteristics of the WRHS 1516R trolley with adjustable forks The WRHS1516 mast trolley is a universal and versatile tool that allows you to lift loads up to 1,500 kg. This alone makes it a perfect device for various work environments. Whether used in a warehouse, shop or when unloading and loading pallets in delivery trucks, this mast stacker delivers reliable performance and ease of operation. One of the key features of this stroller is its massive construction, which does not affect its smoothness during operation. Equipped with double polyurethane rollers, it ensures stable and quiet operation, minimizing noise and vibrations when moving over various surfaces. Thanks to this, the operator can focus on the effective performance of his duties. The trolley is equipped with many additional functions that increase the level of safety and comfort of work. The safety overload valve protects the truck against overload and maintains safe operating parameters. Handle control with a range of up to 190° allows easy maneuvering even in tight spaces, ensuring full control over the stroller. Rounded fork tips make it easier to drive under pallets, which speeds up the loading and unloading process. Additionally, the drawbar covered with a layer of rubber improves work ergonomics and provides better comfort for the operator. Nodpfx Ajricdujanedf Technical parameters: Load capacity 1500 kg Lifting height 1600 mm Fork dimensions (LxW) 1150 x 145 mm External fork width 330-735 mm Height with lowered forks 1970 mm Height with raised forks 1970 mm Minimum fork height 85 mm Total length 1650 mm Total width 740 mm Turning radius 1400 mm Swivel wheels 180 x 50 mm Fork rollers 74 x 70 mm Weight 270 kg What sets us apart from the competition load capacity up to 1500 kg a specialized hydraulic pump enables stepless lowering of the forks very strong construction (long service life) of the pallet truck smooth adjustment of the fork angle with one screw service and spare parts available immediately (shipping throughout the country) wheels and rollers suitable for uneven surfaces: polyurethane at the drawbar, overload valve protecting the trolley handle control up to 190°, rounded fork tips making it easier to get under pallets, drawbar covered with a layer of rubber ensuring better work ergonomics the load is lifted using a hand lever or foot pedal ONLY HERE! Parking brake on both wheels for added safety! smooth adjustment of the fork angle with one screw

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Year of manufacture: 1976 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. No.: 6976 with guarantee geometric acceptance with test report Accessories: - 3-A digital display Ndsdsd Tytyjpfx Aanof FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-

Condition: new, Year of construction: 2025, Characteristics of the TA50 scissor trolley: The mobile scissor table allows you to work in many places, transporting workpieces weighing up to 500 kg. Standardly equipped with brakes on both wheels and smooth regulation of lowering the table top, the scissor table ensures safe and comfortable use. Exceptional maneuverability, thanks to the use of swivel wheels, allows you to easily maneuver in tight spaces and move around obstacles. Thanks to this, the user can effectively use the scissor table in various workplaces. Ndsdpfx Aeric Hneanef Excellent quality welds made by welding robots are another advantage of the mobile scissor table. This is a guarantee of precise and durable welded joints, which translate into high quality of workmanship. The reinforced hydraulic system makes it easier to lift heavy pallets with goods, enabling even people with less physical strength to operate the trolley without difficulty. The design of the scissor table ensures easier and faster lifting and lowering of goods, which translates into work efficiency. Additionally, the mobile scissor table is characterized by a tight pump closure, which protects against contamination and oil leaks. This not only ensures long-term and reliable operation, but also minimizes the need for repairs and maintenance. Full availability of spare parts and service throughout Poland is an additional advantage of the mobile scissor table. In case of any repairs or maintenance, the user can count on quick and reliable assistance. Technical parameters MAXIMUM LOAD 500 kg LIFTING HEIGHTS 340-855 mm PLATFORM DIMENSION 910 x 515 x 50 mm PLATFORM HANDLE HEIGHT 950 mm WEIGHT 75 kg Standard equipment: Reinforced polyurethane wheels Ergonomic handle Sealed hydraulic foot pump Adjusting the descent speed of the platform Lock on the road wheels

Condition: reconditioned (used), Year of construction: 1983, Universal tool milling machine Make: DECKEL Model: FP 2 Active Ndjdjfzk Hfopfx Aanof Year of manufacture: 1983 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2202-10799 Milling head type: 2271 Milling head number: 300-1406 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: new, Year of construction: 2025, Characteristics of the scissor lift trolley: The TA30 scissor table is a versatile and reliable device that is perfect for a variety of work environments, such as warehouses, construction sites, factories, workshops and many others. Its compact design, excellent quality of welds made by welding robots and reinforced hydraulic system make the scissor table an irreplaceable tool for professionals. Thanks to its functionality and versatile use, the TA30 scissor table is an ideal solution for various tasks. Whether you work in a warehouse, construction site, factory, workshop or other location, this cart allows you to move and manipulate items efficiently. Its impressive load capacity of 300 kg allows you to safely lift heavier objects, and the reinforced hydraulic system makes it easier to use even for people of varying physical strength. The structure of the scissor table has been designed to ensure easier and faster lifting and lowering of goods. Employees can manipulate objects efficiently, which increases the efficiency of logistics operations. Additionally, the anti-overload valve prevents overloading of the trolley, which reduces operating costs, and the tight closure of the pump protects against contamination and oil leaks, which translates into the safety and efficiency of the device. The stroller is also equipped with swivel wheels, which ensures exceptional maneuverability and ease of maneuvering in various conditions. Additionally, easy access to lubrication points facilitates maintenance and keeping the scissor table in perfect condition. It is worth emphasizing that the scissor table offers full availability of spare parts and extensive service throughout Poland. Thanks to this, in the event of any repairs or maintenance, you can quickly obtain the necessary parts or use professional service support, minimizing downtime and ensuring business continuity. Technical parameters of TA30 CAPACITY 300 kg TABLE DIMENSIONS 500 x 820 mm TABLE LIFTING RANGE 318-910 JUMP 592 Nsdporic E Uefx Aanjdf DIMENSIONS 1100 x 520 x 1010 mm PEDAL PRESS TO PULL UP (approx.) approx. 25mm DIAMETER OF A CIRCLE 125mm WEIGHT 78 kg

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Ndodpfx Aash Rv U Esnef RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen-

Condition: new, Year of construction: 2025, The electric pallet truck with electronic scale is a modern device for transporting and weighing loads up to 2000 kg. Equipped with potentiometer control and turtle mode, it ensures precise maneuvering and safe work in tight spaces. Thanks to the built-in electronic scale, it allows for quick and accurate weighing of goods during their movement. The solid construction and reliability make it an ideal choice for intensive use in warehouses and logistics centers. The truck does not require UDT authorizations or inspections. Technical parameters Capacity 2000 kg Turning radius 1300mm Fork height raised 90mm Fork lowered height 200mm Fork length 1150mm Fork width 550mm Battery voltage/nominal capacity 2x12v/65Ah Nedpfx Ajricv Nsansdf Drive motor power 0.75kW Lifting motor power 0.8kW Brake electromagnetic Travel speed with/without load 4.5 km/h Maximum ground gradient, loaded/unloaded 3/5% Length / width / height 1620x570x1225mm Weight 173kg

Condition: new, Year of construction: 2025, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials. Product features Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band size - 2720×27×0.9 mm Band tension - mechanical (manual) Band speed - 36, 72 m/min Arm lowering control - stepless – hydraulic cylinder Vice base height - 765 mm Minimum material length in vice - 100 mm Power supply - 3-phase, 400 V Total power - S1 100%: 1.5; S6 40%: 2.1 Cooling pump motor power - 0.025 kW Weight - 370 kg Warranty - 12 months Nsdpfx Aaji D Ddienedf User manual - yes CE declaration - yes Angle 0° --- ø250 310×210 240×240 45° R ø200 200×140 180×180 45° L ø165 185×145 160×160 60° R ø120 120×95 100×100 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º Ndedpfx Aovuf S Neanjf ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.