Used Surface Equipment for sale (45,394)

Year of construction: 2008, condition: used, functionality: fully functional, Function : Stage 1 is a heated degreasing and phosphating stage. The stage has an external heat exchanger. Water, to compensate for evaporation and adhesion losses, is supplied from stage 2 through a separate circulation pump. An electronic level controller maintains a constant level of the liquid. Pump types 2 x W80 - 11 kW Total pump capacity 4.300 l/min – 18 MVS/ 22 kW Circulation pump 1 x W35 – 2,2 kW Total pump capacity 380 l/min – 10MVS/ 1,96 kW Heat exchanger gas max. 250 kW Ledpfszpxwdox Ahtjhk Spray pressure 1 – 1,5 bar Stage 2 is an unheated rinsing stage with water supply from stage 3. The water is supplied through a separate circulation pump. The stage has overflow to the drain. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 3 is an unheated fine rinsing stage with demineralised water from the reverse osmosis plant. The demineralised water is supplied direct from the osmosis plant. An electronic level controller maintains a constant level of the liquid. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 4 is a final fine osmosis rinse direct from the osmosis plant. The plant has cascade rinse technique with automatic level supervision for reducing the wastewater to a minimum. Maintenance and service friendly construction, all electrical elements are accessible from outside.

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. Lhodpfx Ajzut Axohtek FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse.

Year of construction: 2016, condition: used, functionality: fully functional, We offer this used PLANOLITH granite surface plate PLANOLITH granite surface plate, year of construction 2016. Order number: 221881-1 Weight: 855 kg Accuracy grade: DIN 876/1 Permissible deviation: 0.025 mm Actual deviation: 0.00576 mm Checked on: 2016-11-09 If you have any questions or need more information, feel free to send us a message or give us a call. Lhedezgw D Rjpfx Ahtjk

Condition: excellent (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotating tables and two turbines, each with a power consumption of 5.5 kW. Lhjdpoy Uc Iaofx Ahtjk The designed shot blasting unit is manufactured for semi-automatic shot blasting of the external surface of parts placed on a rotating table. The machine is equipped with two rotating tables. Rotating table diameter – 1400 mm Maximum product height – 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours – 5275 Commissioning date: 03/31/2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blasting wheel, number and type: 2 WX1M External diameter of blasting wheel: 330 mm Blasting wheel speed: 2900 rpm Amount of abrasive material thrown per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotating table diameter: 1400 mm Rotating table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance from the spindle axis to the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: Ljdoxqzmkjpfx Ahtjhk - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. Lodpfx Ahszt R E Uotjhk With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm.

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; Ledpfszimbkex Ahtshk submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Label dispensing module for print integration, print module 4L300 thermal transfer printer, belt conveyor, see photos for details. Lsdpjzn N Nnjfx Ahtohk

Condition: used, Year of construction: 2000, VENJAKOB HGS-Z/H Surface Coating Machine / Painting System Lsdjzvaz Depfx Ahtshk Manufacturer: VENJAKOB Type: HGS-Z/H Year of Manufacture: 2000 Machine Type: Automatic surface coating machine / Spray painting system for all 5 sides Surface coating machine with 4 spray heads for water-based paints, solvents, and stains Design: Automatic surface coating machine Process: Spray painting / Surface coating Workpiece transport: Continuous operation Compressed air connection: approx. 6 bar Application area: Wood and wood-based components Control system: VENJAKOB control system Paint application: Spray application Design: Industrial continuous system Machine dimensions: 4450 x 3170 x 2520 mm Passage width: 1300 mm Working height: 920-960 mm Passage height: 200 mm Rubber conveyor belt with paint recovery and belt cleaning

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Standard Accessories • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator • Rapid Wheel head Retraction • Teach-Input Positioning • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training • Instruction Manual Ljdpfjzmhknex Ahtohk

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension +100 km/h, ramp, aluminum floor Equipment: - 10x lashing eyes - Aluminum floor - Tailgate - Loading angle 20° Net: €7,703.36 / Gross: €9,167.00 Article number: ILF335401791.12 Technical data: • Brand: Hapert Trailers • Model: Indigo LF-3 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 405 x 179 x 19 cm • External dimensions (LxWxH): 589 x 238 x 145 cm Ljdjzu N Nzepfx Ahtehk • Loading height of the floor: 42 cm • Perm. gross vehicle weight: 3,500 kg • Unladen weight: 1,101 kg • Payload: 2,399 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic • 100km/h approval: Yes DESCRIPTION • 3x parabolic axle, each 1,800 kg • Robust steel mudguards, walkable • 4x HAPERT Safety Steps (anti-slip surface) • Grid grating step plates on the rear side • Aluminum profile floor • Very stable steel frame, welded • Frame completely hot-dip galvanized • 1x continuous tailgate, 150 cm long, mounted on a shaft, instead of a 120 cm ramp • Length of tailgate: 150 cm • Loading angle: 13° • Stable eccentric locks • Corner posts with closures for the rear door, removable without tools • Insertion option on all 4 corners for tarpaulin frames, grid attachments, side extensions or front panel extension • Robust support legs on the tailgate • Lifting aid for the tailgate • Very low chassis for low loading angle • Optionally with bucket rest • 10x lashing eye recessed in the frame profile (1000dAN/kg), TÜV certified • Hole rail on three sides, 6cm (Combi Protect Rail), also usable with locking rods and lashing straps - round holes 25mm, oblong holes 54x25mm • Parabolic axle from KNOTT • Reversing automatic • KNOTT overrun device and parking brake • Very stable, bolted V-drawbar, REINFORCED • 13-pin plug • Reversing lights • Large-format safety lighting • Rear position lights • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel, centered _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request customizations! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - dealers & repair workshops for over 30 years. - Errors, omissions and prior sale excepted -

Condition: good (used), Year of construction: 2014, 2x carton packaging machines, carton erectors, B&E Equipment / I-Pak – used: Price per unit, ex works: only €9,950 (net), with self-dismantling! Lhjdpezbyn Njfx Ahtjk Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1x Nordson ProBlue 4 hot melt adhesive applicator with 4-liter hot melt adhesive Weight: approx. 1,500 kg 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: good (used), Year of construction: 2020, functionality: fully functional, Mono Omega Cookie Depositor - used - year of manufacture: 2020 - computer-controlled - 2 heads Ledpfx Aey Ald Hjhtehk - cutting wire - complete set of working nozzles - for 40x60 trays - good technical condition/machine checked and cleaned - collection from warehouse/shipping option available - price on request

Condition: like new (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, pressure: 12 bar, operating pressure: 12 bar, We offer this new Cryonomic Cob 71r cryogenic cleaning unit + abrasive set, manufactured in 2026. For sale: CRYONOMIC COB71R cryogenic cleaning machine, equipped with an abrasive module, in near-new condition. The machine has only been used for 5 hours and is still in excellent cosmetic and working condition. The COB71R is a high-performance, professional cryogenic cleaning machine, equipped with a remote control integrated into the gun, allowing direct adjustment of the dry ice flow rate, air pressure, and lighting. Thanks to its 30 kg hopper and a working pressure of up to 12 bar, it is perfectly suited for industrial cleaning, maintenance, restoration, stripping, and surface preparation. The abrasive module also allows for more demanding stripping operations (rust, paint, graffiti, etc.). Included equipment: CRYONOMIC COB71R machine Original abrasive module Gun with remote control Original hose and accessory set Documentation and invoice (if available) Condition: Only 5 hours of use Impeccable operation Machine ready for work Lsdeziiy Aopfx Ahtshk Reason for sale: This machine was purchased to develop a new business activity, but it ultimately does not align with my field of activity. This is the sole reason for the sale. Additional photos can be provided upon request. Price: to be determined / negotiable. Purchase price: €35,828.1 (including VAT).

Condition: good (used), Year of construction: 2014, Cardboard packaging machine, carton erector, B&E Equipment / I-Pak – used: Price ex works: only €9,950 (net), if disassembled by the buyer! Lodpfxszbynps Ahtehk Manufacturer: B&E Equipment / I-Pak Type: BA20-2 Year of manufacture: 2014 Serial number: 14/0559 Each unit comes with 1x Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,250 kg 400V, 7kW, 16A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: new, BRAND NEW HYDRAULIC SURFACE GRINDING MACHINE WITH INDUCTION MAIN MOTOR "Your Next Reliable Production Machine Starts Here" Lhedpfszupq Ejx Ahtsk

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, Young, like-new demonstration machine: High-precision surface grinding machine, "Optimal" series, available at a special net price. Grinding area: 500 x 250 mm Features: ● Surface grinding machine with automatic vertical feed ● Grinding sequence: roughing – finishing – spark-out ● Siemens S700 touchscreen panel and electronic handwheel for Y-axis ● Digital display for vertical axis Y and cross axis Z ● Table cover and splash guards in stainless steel design Lhedpfx Ahjyak Dljtjk ● Electrical cabinet fitted predominantly with Siemens components ● Includes manual dressing device, electro-magnetic chuck, and coolant filtration system Main technical data: Grinding length mm 500 Grinding width mm 250 Distance table surface to spindle center mm 450 Table drive Hydraulic Table load kg 180 Longitudinal movement X Table speed, steplessly adjustable m/min 7 – 23 Max. longitudinal travel mm 560 Cross movement Z Max. travel speed mm/min 990 Max. cross travel mm 275 Vertical movement Y Max. travel speed mm/min 460 Grinding spindle / Grinding wheel Spindle power kW 2.2 Wheel dimensions mm 200x20x31.75 Spindle speed (speed control optional) min⁻¹ 2850 Dimensions Machine weight (net) kg 1800 Machine dimensions (inc. reciprocation) Width mm 2300 Depth mm 1650 Height mm 1680 Power connection kW 3.7 All model series include standard accessories: ● 1 standard grinding wheel ● 1 wheel flange ● 1 dressing block with diamond ● 1 balancing arbor ● 1 balancing stand ● 1 machine lamp ● 1 set of machine tools ● 1 set of documentation with spare part list ● Machine in CE-conform (metric version) Precision and surface quality at optimal price. Fully equipped for universal use in a wide range of industrial and application areas. Machine comes with a 12-month parts warranty. By the way, aside from affordable new and certified used machines, we offer even more: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Spare parts supply • Control training for Siemens, Heidenhain, and Fanuc • Trained service staff available in your area and more • 24/7 telephone support • Tax-optimized trade-in of your old machine • Attractive financing options, even without down payment

Condition: new, Year of construction: 2026, functionality: fully functional, Special Offer – 5% Discount Available! Surface Grinding Machine SGC512AHD – Moving Column Type The MTP SGC512AHD Surface Grinding Machine is a heavy-duty precision grinder designed for machining large flat surfaces in tool rooms, production facilities, and metalworking workshops. Its moving column design, rigid cast-iron construction, and Mitsubishi PLC touchscreen control ensure high accuracy, excellent stability, and reliable performance. Hardened and precision-ground guideways with Durcite-B coated sliding surfaces reduce friction and provide smooth, accurate movement. The hydraulic table drive guarantees stable operation, while the precision spindle produces an excellent surface finish. Main Features * Mitsubishi PLC touchscreen control * Electronic handwheel * Moving column construction * Hardened and ground guideways * Durcite-B guideway coating * High grinding accuracy * Hydraulic table drive * Heavy-duty cast-iron construction * CE certified Standard Equipment * PLC touchscreen control * Electronic handwheel * Grinding wheel * Wheel flange * LED work light * Electromagnetic chuck * Balancing stand * Balancing arbor * Safety guards * Demagnetizer * Coolant system * Diamond dresser * Machine feet * Central lubrication * Tool kit Included Equipment * Magnetic separator with paper filter * Full machine enclosure * Parallel dressing device * Dust extraction system * 2-axis digital readout (DRO) * Integrated magnetic chuck controller * 6 kW frequency inverter * Diamond dresser * Additional wheel flange Technical Specifications * Model: SGC512AHD * Brand: MTP * Table size: 500 × 1200 mm * Magnetic chuck: 500 × 1200 mm * Longitudinal travel: 1140 mm * Cross travel: 540 mm * Maximum spindle-to-table distance: 570 mm * Maximum workpiece weight: 800 kg * Grinding wheel: 350 × 20–40 × 127 mm * Hydraulic table speed: 5–25 m/min * Spindle motor: 5.5 kW Lsdpfx Ajy Hr Uyehtshk * Spindle speed: 1440 rpm * Hydraulic motor: 2.2 kW * Vertical feed motor: 0.75 kW * Machine dimensions: 3550 × 2250 × 2530 mm * Machine weight: approx. 5200 kg Applications * Tool rooms * Manufacturing plants * Metalworking workshops * Precision grinding of tool steel, structural steel and cast iron * Production of precision machine components Transport & Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected for transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide technical advice, spare parts, and comprehensive after-sales support. Contact us for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: new, functionality: fully functional, power: 560 kW (761.39 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. FULLSTAR 110 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing FULLSTAR-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-110 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: FULLSTAR-110 - Production Capacity: 200-300 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 1100x850mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1500 mm - Maximum Feeding Size: 800 mm - Vibrating Screen Size and Deck: 1st Chassis: 2200x5500 mm : 2nd Chassis: 1700x4500 mm(Grizzly) ¬- Screw Washer Size: 800x8000 mm (Twins Helix) - Total Motor Power: 560 Kw - Generator (optional): 700 kvA - Plant Dimensions: 1st Chassis: 22000 x 4700 x 4700mm : 2nd Chassis: 17500 x 4650 x 4600mm FULLSTAR-110 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires Lhsdezv Tamjpfx Ahtsk • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 377 kW (512.58 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. Fullstar-60 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing Fullstar-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-90 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: Fullstar-90 - Production Capacity: 120-180 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 900x650mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1000 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1st Chassis: 1700x4500 mm : 2nd Chassis: 1550x4000 mm(Grizzly) ¬- Screw Washer Size: 600x5000 mm (Twins Helix) - Total Motor Power: 377 Kw - Generator (optional): 450 kvA - Plant Dimensions: 1st Chassis: 18960 x 4070 x 4650mm : 2nd Chassis: 15500 x 4650 x 4400mm FULLSTAR-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen Ledpfx Ajzvfk Dohtohk • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2018, REF: MM6441 Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Model - DCG. Lhsdpfxjza T Slj Ahtsk Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: ready for operation (used), Year of construction: 2024, Lease Return Mahr MarSurf XP 20 Professional CNC surface and contour measuring station – manufactured in 2024 Technical Data Manufacturer: Mahr Model: MarSurf XP 20 Professional – Series 1000 Year of Manufacture: 2024 Condition: Used Equipment MarSurf XP 20 Professional with LD control MarWin Professional Contour & Roughness Plus CNC-Plus Software QS-STAT Plus (Q-DAS interface) Industrial PC (Dell) with Windows 10 IoT Enterprise Feed unit MarSurf LD 130 Feed length: 130 mm Standard measuring stroke Z: 13 mm Probe arm changer for up to 10 probe arms 4-axis CNC workpiece positioning system Swivel axis ±135° Rotary axis ±170° Linear axis X: 400 mm Linear axis Y: 400 mm Positioning accuracy: approx. ±250 µm (X/Y/Z) Hard stone measuring plate with mechanical-pneumatic vibration isolation CNC measuring column 17" touchscreen Control cabinet Soundproofed protective enclosure Machine dimensions Enclosure (W × D × H): 1450 × 1300 × 2270 mm Ledezqzn Uopfx Ahtohk Accessories Adapter plate X/Y/Z offset Manual chuck DM28 Signal tower Probe arm set Additional probe arm 32 GB RAM Complete technical documentation (digital and in paper form) Description For sale is a high-quality CNC surface and contour measuring station from Mahr. The system is suitable for highly precise measuring tasks in industrial quality control and features extensive equipment with professional measuring and evaluation software as well as an automatic 4-axis positioning system. The system was delivered in 2024 and is in used condition. Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, - Cooking chamber dimensions: 1200x2000 mm Lhsdpfxewxmn Se Ahtsk - Refurbished equipment: The equipment is prepared upon order, collection and return deadlines are agreed at that time (please ask for the price after refurbishment).

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Date of manufacture - 2021. Lhsdpfx Aewl H Niehtok Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Our 400 Ton/Hour Capacity Stationary Crushing and Screening Plant consists of 40 m³ vibrating feed bunker, wobbler feeder, CLK-110 jaw crusher, impact crusher, tunnel systems, stock and return belts, stock bunkers, control cabinet and automation system. The products transferred to the feed bunker are separated from dirt and mud in the first stage of the double-stage wobbler feeder and bypassed by the bypass belt conveyor In the second stage of the wobbler feeder, the products that are suitable for the jaw crusher are sent to the stock area with the transfer belt. The jaw crusher, with a maximum feed of 800 mm, crushes the products and sends them to the fist vibrating screen. In the first vibrating screen, the products are separated in 0-40 mm, 40-90 mm sizes and sent to the stock area. Products above 90 mm size are transferred to the secondary crushing and screening unıt. The products transferred to the tunnel system are sent to the 12-13 S impact crusher. Ledpfx Aezvxlnjhtehk The products crushed in the impact crusher are separated in different sizes by vibrating screen and sent to the stock area. The products stored in the stock area are transferred to the pan feeder by passing through the tunnel system according to the need. The vibrating pan feeder transfers the products to the stock bunkers with the transfer belt conveyor All equipment of the crushing &screening plant is controlled from 3 different automation panels.