Used Scm 2041 for sale (658)

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, spindle diameter: 40 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, input voltage: 400 V, number of spindles: 5, table width: 230 mm, Equipment: motor brake, The machine was installed at the plant in 2024. The planer was purchased by us as new and installed at the plant in January 2024. Due to a change in the technological requirements of our production, it was replaced with a different model. The reason for the sale is a change in the plant’s needs. The machine is in very good technical condition and ready for operation. Pjdpjz Rz Hvofx Airogu

Condition: excellent (used), functionality: fully functional, cutting height (max.): 130 mm, total length: 2,000 mm, total height: 130 mm, cutting width (max.): 230 mm, total width: 230 mm, overall weight: 3,000 kg, SCM Superset 23 – Four-Sided Planer – 5 Heads – 230 × 130 mm – FOUR-SIDED PLANING MACHINE! Professional SCM Superset 23 four-sided planer, renowned Italian manufacture. The machine is equipped with 5 spindles, stepless feed rate adjustment via a frequency inverter, and electric thickness setting. A robust feed system and pneumatic roller pressure ensure stable and precise guidance of the workpiece. The planer is used and in very good technical condition. The machine is suitable for professional wood processing in carpentry workshops, sawmills, and for the production of structural elements, moldings, boards, and timbers. KEY PARAMETERS: - maximum workpiece width: 230 mm - maximum workpiece height: 130 mm - number of spindles: 5 - spindle diameter: 40 mm - stepless feed rate adjustment via a frequency inverter - electric thickness setting - pneumatic roller pressure - central table lubrication - long infeed table: 1980 mm Psdpfx Aijzzx Iyerogu - machine enclosed in a cabinet SPINDLE ARRANGEMENT: Bottom horizontal spindle - working width: 230 mm - motor power: 4 kW Right vertical spindle - working height: 130 mm Left vertical spindle - working height: 130 mm - total power of the 2nd and 3rd spindles: 7.5 kW Top horizontal spindle - working width: 230 mm - motor power: 5.5 kW - electric up/down adjustment Bottom horizontal spindle - working width: 230 mm - motor power: approximately 5.5 kW All spindles have adjustment in the appropriate directions: up/down and left/right. FEED SYSTEM: - 6 top metal, toothed feed rollers - double top discharge roller – smooth, rubber - 2 bottom rubber pull rollers - 2 bottom side pressure rollers - pneumatic roller pressure - stepless feed rate adjustment via a frequency inverter - feed motor: 3 kW OTHER TECHNICAL DATA: - body lifting motor: 0.37 kW - length of the infeed table: 1980 mm - central table lubrication - dust extraction port diameters: 5 × 130 mm - machine dimensions: 3600 × 1800 × 1750 mm - weight: approximately 3000 kg - country of manufacture: Italy - condition: used, very good Gross price, VAT margin. The machine is available from JBS Maszyny Stolarskie. We invite you to contact us by phone. You can view and inspect the machine before purchasing. We also assist with organizing transportation. JBS WOODWORKING MACHINERY Sale of professional woodworking machines

Condition: excellent (used), Catalog number 8130 TECHNICAL DATA PLANER: - roller width 410mm - 3-knife roller - silencing comb - roller guard - adjustable angle guide - table length 2000mm - both tables adjustable THICKNESSER: - max thickness of workpiece in the thicknesser 240mm - thicknesser roller guard - from above: - pawls - infeed roller, toothed, helical - pressure rollers - planing roller - outfeed roller, smooth - main motor 3.7kW - 2 types of rotation speeds - manual table adjustment up/down - diameter of dust extraction nozzle 120mm - dimensions L/W/H 2000x900x1120mm - weight 550kg ADVANTAGES - Made in Italy - silencing comb - longer infeed table Pjds Aaarhspfx Airegu - unpainted - very good condition - used planer-thicknesser Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: AA1/014223, functionality: fully functional, input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,970 mm, travel distance Y-axis: 1,725 mm, travel distance Z-axis: 340 mm, workpiece length (max.): 2,690 mm, workpiece width (max.): 1,240 mm, number of axes: 3, number of slots in tool magazine: 8, controller manufacturer: ESA GV - XILOS PLUS, actuation type: electric, total height: 2,897 mm, total length: 3,800 mm, total width: 2,400 mm, overall weight: 2,600 kg, table length: 2,740 mm, table width: 1,255 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, SCM Pratix 48 NST CNC machining centre for drilling and routing, year 2004, from the closure of a small, artisanal woodworking shop (no heavy industrial shift production). Machine in excellent condition, stored indoors, inspected and serviced by an official SCM technician. TECHNICAL SPECIFICATIONS: Working area: X = 2,690 mm | Y = 1,240 mm Axis travels: X = 2,970 mm | Y = 1,725 mm | Z = 340 mm Workpiece clearance: 200 mm Multifunctional grooved aluminium table with integrated vacuum channels (vacuum hole pitch 120 mm, groove pitch 40 mm) Pneumatic pop-up reference stops controlled by CNC SCM Power 2000 electrospindle 7.5 kW (10 HP), HSK 63F tool connection, rotation speed up to 18,000 RPM Automatic rear tool changer: Rapid, 8 positions F9 boring unit: 5 independent vertical spindles + 4 horizontal spindles (1+1 in X and 1+1 in Y) Upgraded 250 m³/h vacuum pump mounted on a mobile trolley CNC control unit: PC-Office running Windows XP with SCM Xilog Plus software interface INCLUDED ACCESSORIES & TOOLING: Original SCM right-angle attachment head with 2 horizontal outlets (for router bits with ER32 collet or saw blade up to Ø 160 mm), 360° manually adjustable Set of HSK 63F tool holders, ER32 clamping nuts, and service wrenches Extensive set of professional OMAS profile cutters and tooling for doors, windows, and solid wood joinery Modulset modular vacuum template clamping elements (H=20 mm) Original SCM user & maintenance manuals, electrical/pneumatic schematics, and original CE Declaration of Conformity Pgjdpfx Aie Af Ig Usrsu TERMS OF SALE & DELIVERY: Delivery terms: Ex Works (EXW). Dismantling, packing, loading, and transportation are entirely the buyer's responsibility and at their expense. The machine is installed and can be inspected on site under power by agreement. PLEASE NOTE: Machine fully inspected, software/hardware reset, and functionally tested by an official SCM service technician, with an official service report and complete system backup available.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 1,600 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 12 mm, height adjustment type: electric, Equipment: CE marking, documentation/manual, SCM Group -STEFANI: 4-sided edgebander complete machine line (2x double-sided edgebanders with vacuum loading, turning unit, drilling and vacuum unloading,) 1. SCG - Vacuum feeder with roller conveyor 2. STEFANI Evolution SSB - double-sided edgebander 3. MAHROS - part turning unit (turning parts by 90°) 4. STEFANI Evolution SSB - double-sided edgebander 5. BIESSE - drilling machine 6. SCG - Vacuum unloading with roller conveyor + including 4x NORDSON units for PUR glue application -All parts/units were made in Italy. Pgjdpfx Ais Afbuhereu -During the operation the machine line was used only with EVA type of glue. The PUR gluing units have not been used and they are in a brand new condition - applicators on the machine and the 4 NORDSON units. -Please, find the technical parameters in the PDF bellow.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, overall weight: 4,795 kg, SCM WINDOR 20 corner processing center for machining wooden frames (windows and patio doors). It performs mortising, profiling, and hardware/glazing bead machining in a single pass, with automatic workpiece return, allowing a single operator to handle the entire process. Podj Afwtvepfx Airsgu Complete with a toolset for 68mm windows.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AB00029039, feed length X-axis: 3,050 mm, feed length Y-axis: 900 mm, feed length Z-axis: 60 mm, input frequency: 50 Hz, input current: 31 A, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, working width: 900 mm, total width: 2,159 mm, total length: 3,459 mm, total height: 1,500 mm, SCM Startech CN Plus R F23L CNC drilling, grooving and routing centre, manufactured in Italy in 2023. The machine is currently installed in Pejë, Kosovo, and can be inspected under power by prior appointment. Machine identification: - Manufacturer: SCM - Model: Startech CN Plus R F23L - Year of manufacture: 2023 - Serial number: AB00029039 - CE version - Machine weight: 1,383 kg Main equipment: - F23L drilling head - 13 independent vertical drilling spindles: 7 in X and 6 in Y - 10 horizontal drilling spindles: 6 in X and 4 in Y - Drilling motor power: 2.2 kW - Drilling spindle speed: 4,200 rpm - 5.5 kW vertical electrospindle for routing operations - Electrospindle speed: 1,000–18,000 rpm - ER32 collet with manual tool change - Maximum routing tool diameter: 20 mm - Integrated grooving saw in the X direction - Maximum saw blade diameter: 125 mm - Saw blade speed: 5,500 rpm - Automatic workpiece positioning and side alignment - Centralised lubrication system - SCM Maestro CNC software with Hicam machine interface - PC control with 19-inch display - Barcode program support - Uninterruptible power supply unit (UPS) - Additional Maestro CNC hardware key Working capacity: - Maximum panel dimensions: 3,050 × 900 × 60 mm - Minimum panel dimensions: 200 × 80 × 10 mm - Maximum axis speed X/Y/Z: 40/40/10 m/min - Maximum vertical drilling depth: 30 mm Installation data: - Electrical supply: 400 V, 3+N, 50 Hz - Input current: 31 A - Installed power: 20.7 kVA - Compressed-air consumption: 50 Nl/min The machine is used, fully functional and available for demonstration under power. Psdpfxj Afnhhs Airogu Availability: by arrangement. Sale basis: EXW Pejë, Kosovo. Dismantling, loading and transport can be arranged separately. Further technical information, documentation and an operating video are available on request.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion system connected by a torsion bar to grant a planar movement of the movable press platen. Pedpfxs Ad Hato Airogu Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: AH/117989, functionality: fully functional, travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,200 mm, number of axes: 4, Usable work area X-axis = 3,086 mm Y-axis = 2,155 mm Z-axis = 100 mm Pgjdpfxs Af Aare Airsu C-axis for tool heads Work table: Slatted table with a phenolic resin base, grid 30 x 30 mm Multi-zone vacuum system WORKING UNITS Drilling unit Vertical spindle in X - 5 Vertical spindle in Y - 2 Motor power 2.2 kW Milling spindle 6.6 kW electric spindle HSK-F63 tool holder Tool changer: Linear tool magazine - 13 tool positions Automatic tool length measurement Vacuum pump Becker 2 x 250 m³/h Control: PC control Busellato/SCM Program nesting module for “Wave” (Maestro) WAVE CAD/CAM software (depending on configuration) Handheld control unit Unloading device with integrated extraction system Machine dimensions L = 5120 x W = 3420 x H = 2120 mm Weight 3400 kg Additional drilling unit (ATEMAG)

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Spindle speed vertical drilling spindle: 2000-6000 rpm Horizontal drilling spindle in X-direction: 2 + 2 Psdjzwg H Aspfx Airjgu Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Safety guard, right: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA1/018801, functionality: fully functional, power: 9.5 kW (12.92 HP), workpiece length (max.): 3,086 mm, workpiece width (max.): 2,155 mm, overall weight: 3,841 kg, year of last overhaul: 2016, Equipment: CE marking, documentation/manual, We are offering this ready-to-use SCM Pratix S22 machining center, manufactured in 2016. Podpsz Sp N Uefx Airegu The machine features a 9.5 kW spindle (max. 24,000 rpm) and an F12 2.2 kW drilling unit (12 independently operated). The machine can be viewed in operation in October and the first week of November 2026. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece length (max.): 2,480 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, table length: 2,480 mm, table width: 1,250 mm, CNC – MORBIDELLI UNIVERSAL 2412 TV (SCM Group) Technical specifications: Machine dimensions: approx. 4320 x 1800 x 2100 mm Machine weight: 2100 kg Working range of X-axis: 2480 mm Working range of Y-axis: 1250 mm Pjdpfj Aduqaox Airjgu Z-axis stroke: 150 mm Maximum workpiece thickness: 80 mm X/Y axis speed: up to 78 m/min Z-axis speed: up to 24 m/min Power supply: 3 x 400 V / 50–60 Hz Total installed power: 16.5 kW Rated current: 29 A Operating pressure: minimum 7 bar Compressed air consumption: 100–200 NL/min Drilling unit: - 12 vertical spindles - 6 horizontal spindles (2+2 in the X-axis and 1+1 in the Y-axis) + integrated grooving saw in the X-axis. Milling spindle: - power: 6.6 - 7.5 kW - speed: 1500-24000 rpm - clamping system: HSK 63F - tool rack with 10 positions Beam-type work table: 6 beams Software: Xilog Plus + PanelMac Windows XP Additional equipment: Suction cups Light curtain safety gate Vacuum pump 90 m3/hour Features: Suitable for MDF, chipboard, and solid wood Robust and reliable construction. Easy operation and maintenance. The machine is suitable for small to medium-sized production facilities. Inspection and testing on site are available. The machine is in good technical condition and has been regularly maintained.

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Pgsds Aflwyspfx Airou

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 107 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, overall weight: 4,070 kg, Equipment: documentation/manual, We offer this used SCM Casadei Axo 400/38 panel saw, manufactured in 2019. Brand: SCM Casadei Sempre Serial number: AE00000295 Type: SEZ.MON.2 Model: AXO (Passat) 400/38 Year of manufacture: 2019 Weight: 4070 kg Rated voltage: 400 V Number of phases: 3 Current: 40 A Frequency: 50 Hz Short-circuit current: 10 kA Psdpfx Ajz R Su Seirjgu If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AH00001546, functionality: fully functional, operating hours: 6,898 h, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, height adjustment type: electric, feed rate X-axis: 22 m/min, actuation type: electric, total length: 7,000 mm, overall weight: 3,121 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, INTERIOR 46 DESIGN Ltd. – Ruse offers for sale: SCM – Stefani MD straight-edge edging machine – manufactured in 2019. The machine was purchased new and used for 5 years in the production of custom-made kitchens. In perfect technical condition. Fully serviced and maintained by SCM Bulgaria. Pgsdpfx Aiezki Dkorju The machine is located in the SCM showroom in Varna. Inspection and testing on-site are possible.

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, input current: 59 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 170 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,380 mm, workpiece height (max.): 170 mm, number of axes: 5, number of slots in tool magazine: 26, total height: 2,300 mm, total length: 6,000 mm, total width: 2,100 mm, overall weight: 3,840 kg, table length: 3,300 mm, table width: 1,400 mm, Equipment: CE marking, documentation/manual, AUTHOR M200 CNC MACHINING CENTRE GENERAL FEATURES Panel passage: 180 mm on H50 devices AXES SPEED: X = 90 m/min (with Pro-Speed safety device) X = 25 m/min (with Pro-Space safety device) Y = 90 m/min Z = 30 m/min MOTORIZED CHIP CONVEYOR PROGRAMMING SOFTWARE XILOG MAESTRO 3D – the new powerful software developed by SCM Group – is the software for programming MORBIDELLI’s machining centres. • Visualization in 3D graphic mode of the workpiece, geometries, machining operations, and worktable; • Available: shading mode with different shading levels, wireframe mode, rendering visualization, geometry visualization, and toolpath visualization (CAM); • Zoom function, general functions, and visual aid for the workpiece; • Sketching function for inputting geometries, thus creating drawings (CAD) with a preview. Serie 200 working area: 3050 X 1380, N. 1 LASER FOR EASY CUP POSITIONING, N. 1 GROUP 600 - PRISMA KT (11 KW - 18,000 RPM), N. 1 The machining head with 5 interpolating axes, fixed directly to the mobile gantry, guarantees maximum strength during routing operations and provides top finishing quality, even with high material removal rates. Characterized by a specific configuration with axes rotating at 50°, the Prisma machining head offers several advantages over traditional 5-axis machining units, such as: • Full use of machining areas, both with 5 axes and with a vertical spindle. • Spindle overall dimensions are kept outside the working area. • Very streamlined spindle design in the case of horizontal machining. The machining head is equipped with an 11 KW “High Speed” electrospindle and has a centralized exhaust system with automatic activation/deactivation of airflow on the working units. Pgedpfx Aez Eakbeireu Technical specifications: Routing unit with 5 interpolating axes Electro-spindle with HSK 63F quick-release tool holder Rotation speed: 600-18,000 rpm Right and left rotation Power: 11 KW at 16,000 rpm (on S1 duty) 15 KW inverter C-axis rotation = 640° B-axis rotation = 270° C-axis equipped with a TTS locking system (Total Torque System – patented by SCM) “For life” grease lubrication Liquid cooling with a heat exchanger PRESET FOR ANGULAR HEADS on PRISMA KT SPINDLE, N. 1 52.22.71 DRILLING UNIT F26L2 (14V-40X-40Y-L0/90), N. 1 Drilling unit equipped with vertical displacement on an independent Z axis. Technical features: • No. 14 independent VERTICAL spindles • No. 6 horizontal spindles in the X direction • No. 4 horizontal spindles in the Y direction • On/off pneumatic vertical stroke of any spindle: 60 mm • Bit attachment: 10 H7 • Max. bit length: 70 mm • Adjustable rotation speed from 2,000 to 8,000 rpm, controlled by an inverter • Motor power: 3 kW • Integrated blade with independent vertical displacement and 0-90° rotation • Blade diameter: 160 mm (max) Features: Number of tools on board: 16 (max) Max. tool diameter on board: 300 mm (3 axes) Max. tool diameter on board: 350 mm (5 axes) Centre-to-centre distance between positions: 85 mm Single tool weight on board: 8 kg (max) Total weight of tools installed: 48 kg (max) TOOL ROOM, 10 positions, on the right side, N. 1 52.21.97 250(108) M3/H 50(60) HZ - VACUUM PUMP, N. 1

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AB00016224, overall weight: 1,672 kg, type of input current: three-phase, workpiece height (max.): 170 mm, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, workpiece width (max.): 1,100 mm, Equipment: double-sided, Machine in excellent condition. Vacuum table included. For sale due to new acquisition. Pedpfez Rzyvox Airsgu

Condition: used, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Year of manufacture: 2014 Colour: Grey Empty weight: 6.600 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes Pedpfx Ais Af Uu Uerogu - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Door interlock switches, Safety light curtain, Bumper guard, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 300 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - Table length [mm]: 5200 - Table width [mm]: 1300 - Working range X [mm]: 6350 - Working range Y [mm]: 1300 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 7033 - Y-axis maximum stroke [mm]: 1940 - Z-axis maximum stroke [mm]: 475 - Voltage [V]: 400 - Current consumption [A]: 64 - Installed length [mm]: 11000 - Installed width [mm]: 3900 - Installed height [mm]: 3000 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, machine/vehicle number: AB00012078, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 120 mm, saw blade diameter: 350 mm, actuation type: electric, rotational speed (max.): 4,200 rpm, total length: 2,100 mm, total width: 1,750 mm, total height: 1,600 mm, overall weight: 1,866 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Band width 300 mm Maximum blade diameter 350 mm Minimum cutting length 390 mm Feed rate 6-48 m/min Blade holder device diameter 70 mm Pgedpfx Aoz Enhzjireu Spindle rotation speed 4200 rpm Exhaust port diameter 200+100 mm Spindle diameter: 50 mm Bushing diameter: 70 mm Bushing equipped with spacer rings Centralized automatic lubrication Four upper pressure rollers Machine dimensions (L/W/H): 210 / 175 / 160 cm Equipped with: Laser device – projects the cutting line reference onto the workpiece. Mechanical device / programmable guide, controlled from the mobile screen, for laser-guided cutting. Some typical applications: - Trimming irregular edges without using a guide. - Selecting good portions on boards with knots or cracks, using a fast-moving guide and a single blade.

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER Pedpfx Aioz Ebzhorjgu KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AH/109736, functionality: fully functional, input voltage: 400 V, edge thickness (max.): 2 mm, height adjustment type: mechanical, overall weight: 250 kg, Equipment: CE marking, machine in excellent condition, used very little practical and versatile edge gluing machine for carpenters Pjdpfx Aozvmygsiregu for straight edges for angled edges particularly suitable for edge banding of shaped parts READY FOR OPERATION

Condition: excellent (used), SCM sandya 3s 950mm WIDE BELT SANDER Sanding width: 950 MM 1 calibrating unit with a metal roller 2 combination unit with a rubber roller and sanding pad The sanding pad has an oscillating motion One motor for 2 units - 7.5 kW Oscillation controlled by photoelectric cells 2 feed speeds Pgsdpfx As Afunhsirsu Electric table adjustment Table position display Thickness gauge Very good condition, inspected, ready for operation

Condition: excellent (used), Year of construction: 2017, I sell the panel beam saw SCM SIGMA PRIMA 67 P. Year 2017. Cutting size 3300x2200mm + back loading table. Cutting height 67mm. Main motor 9,0 kW Scoring motor 1,3 kW Max saw blade diameters 330 + 160mm Total area covered W.5400mm x D.9900mm 9 pcs. gripper with pneumatic regulation Podpfjz Suv Hsx Airjgu Side alignment with pneumatic stroke. Wincut optimising software included. Very good condition. Available immediately.

Condition: used, Year of construction: 2022, Panel saw Manufacturer: SCM Type: NOVA 400 Year of manufacture: 2022 Technical data Length of sliding table: 3200 mm Maximum saw blade diameter: 400 mm Power supply: 400 V Machine weight: approx. 718 kg Equipment Pedpfx Ae Adr Hleirogu Sliding table made of aluminum Machine start buttons on the sliding table Parallel fence with digital position display Scoring device for clean cuts in composite panels Cross-cutting fence with stops for repeatable cuts Rip fence with position lock Upper saw blade guard on an independent support arm Extension table for large panels Adjustable saw blade height and tilt angle Control panel with emergency stop button Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2020, Equipment: Manual adjustment of the milling spindle with digital display Pgedpfxo Aayg Ej Aireu Milling fence with crank adjustment of the fence jaws and digital display Electrical preparation for feed mechanism Speed indicator Right/left rotation of the milling spindle with electrical locking during switching Automatic motor brake CE conformity declaration Technical data: Spindle extension length 140 mm Milling spindle diameter 30 mm Spindle speeds 3000/4500/6000/7000/10000 rpm Overhang of the spindle base from the table 5 mm Dust extraction port diameter 2 x 120 mm INCLUDED OPTIONS: - Milling fence with crank adjustment - Aluminum fence jaws instead of the wooden fence jaws on the milling fence - LL version with 2 cast iron table extensions, length 2500 mm - Motor power: 7.0 kW, 400 V, 50 Hz Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex works, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claim. The buyer is free to inspect the machines at the location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address + telephone number!)