Used Scm 2200 for sale (652)

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Bsdpo Aflwyofx Akneww

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AB00016224, overall weight: 1,672 kg, type of input current: three-phase, workpiece height (max.): 170 mm, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, workpiece width (max.): 1,100 mm, Equipment: double-sided, Machine in excellent condition. Vacuum table included. For sale due to new acquisition. Bsdoz Rzyvopfx Aknoww

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, input current: 59 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 170 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,380 mm, workpiece height (max.): 170 mm, number of axes: 5, number of slots in tool magazine: 26, total height: 2,300 mm, total length: 6,000 mm, total width: 2,100 mm, overall weight: 3,840 kg, table length: 3,300 mm, table width: 1,400 mm, Equipment: CE marking, documentation/manual, AUTHOR M200 CNC MACHINING CENTRE GENERAL FEATURES Panel passage: 180 mm on H50 devices AXES SPEED: X = 90 m/min (with Pro-Speed safety device) X = 25 m/min (with Pro-Space safety device) Y = 90 m/min Z = 30 m/min MOTORIZED CHIP CONVEYOR PROGRAMMING SOFTWARE XILOG MAESTRO 3D – the new powerful software developed by SCM Group – is the software for programming MORBIDELLI’s machining centres. • Visualization in 3D graphic mode of the workpiece, geometries, machining operations, and worktable; • Available: shading mode with different shading levels, wireframe mode, rendering visualization, geometry visualization, and toolpath visualization (CAM); • Zoom function, general functions, and visual aid for the workpiece; • Sketching function for inputting geometries, thus creating drawings (CAD) with a preview. Serie 200 working area: 3050 X 1380, N. 1 LASER FOR EASY CUP POSITIONING, N. 1 GROUP 600 - PRISMA KT (11 KW - 18,000 RPM), N. 1 The machining head with 5 interpolating axes, fixed directly to the mobile gantry, guarantees maximum strength during routing operations and provides top finishing quality, even with high material removal rates. Characterized by a specific configuration with axes rotating at 50°, the Prisma machining head offers several advantages over traditional 5-axis machining units, such as: • Full use of machining areas, both with 5 axes and with a vertical spindle. • Spindle overall dimensions are kept outside the working area. • Very streamlined spindle design in the case of horizontal machining. The machining head is equipped with an 11 KW “High Speed” electrospindle and has a centralized exhaust system with automatic activation/deactivation of airflow on the working units. Technical specifications: Routing unit with 5 interpolating axes Electro-spindle with HSK 63F quick-release tool holder Rotation speed: 600-18,000 rpm Right and left rotation Power: 11 KW at 16,000 rpm (on S1 duty) 15 KW inverter C-axis rotation = 640° B-axis rotation = 270° C-axis equipped with a TTS locking system (Total Torque System – patented by SCM) “For life” grease lubrication Liquid cooling with a heat exchanger PRESET FOR ANGULAR HEADS on PRISMA KT SPINDLE, N. 1 52.22.71 DRILLING UNIT F26L2 (14V-40X-40Y-L0/90), N. 1 Drilling unit equipped with vertical displacement on an independent Z axis. Technical features: • No. 14 independent VERTICAL spindles • No. 6 horizontal spindles in the X direction • No. 4 horizontal spindles in the Y direction • On/off pneumatic vertical stroke of any spindle: 60 mm • Bit attachment: 10 H7 • Max. bit length: 70 mm • Adjustable rotation speed from 2,000 to 8,000 rpm, controlled by an inverter • Motor power: 3 kW • Integrated blade with independent vertical displacement and 0-90° rotation Bedpfxez Eakbs Aknoww • Blade diameter: 160 mm (max) Features: Number of tools on board: 16 (max) Max. tool diameter on board: 300 mm (3 axes) Max. tool diameter on board: 350 mm (5 axes) Centre-to-centre distance between positions: 85 mm Single tool weight on board: 8 kg (max) Total weight of tools installed: 48 kg (max) TOOL ROOM, 10 positions, on the right side, N. 1 52.21.97 250(108) M3/H 50(60) HZ - VACUUM PUMP, N. 1

Condition: excellent (used), Year of construction: 2006, SCM Z30 CNC Machining Center – Year of Manufacture 2006 – Fully Equipped – On Behalf of Customer For sale is an SCM Z30 CNC machining center from the year 2006. The machine is offered on behalf of a customer and was in operation in a carpentry workshop until recently. The SCM Z30 is a proven and robust CNC machine for furniture production and interior fittings, making it ideal for cost-effective manufacturing in everyday use. Technical Data: Manufacturer: SCM Model: Z30 Year of manufacture: 2006 Travel X-axis: approx. 3000 mm Travel Y-axis: approx. 1300 mm Travel Z-axis: approx. 150 mm Working area: approx. 3000 x 1300 mm Bsdpfx Aoyl Numjknoww Unit / Spindle: Main spindle: approx. 7.5 kW Speed: up to 18,000 rpm Equipment: Console table with vacuum system (pod and rail system) Automatic tool changer – fully equipped Integrated drilling unit CNC control (SCM) Rugged industrial build Applications: Furniture manufacturing Interior fitting Panel processing Single-item and series production Condition: Machine was in use until recently Fully functional Special features: Sale on behalf of customer Photos and videos available Inspection possible by arrangement Location: Germany If you are interested, please get in touch – we will be happy to send you further information, photos, and videos. Location: Ostfriesland region

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Bwjdpsz Hb Nbsfx Aknsw

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AE00003735, overall weight: 4,300 kg, input frequency: 50 Hz, input current: 126 A, input voltage: 400 V, warranty duration: 12 months, Basic information Manufacturer: SCM Group / DMC Model: DMC Eurosystem M4 1350 Year of manufacture: 2023. Condition: unused, new Operating hours: 0 h Working width: 1.350 mm Working thickness: 3-200 mm Feed speed: 2-16 m/min Power supply: 400 V, three-phase, 50 Hz Rated current: 126 A Weight: approximately 4,300 kg Serial number: AE00003735 Location: Tenja, Croatia Availability: immediately Description; For sale is an unused SCM DMC Eurosystem M4 1350 automatic wide-belt sanding and calibrating machine, manufactured in 2023. The machine has never been used in production and has 0 operating hours. It is installed at our production facility and is available for inspection by prior appointment.   Working unit configuration 1st working position - sanding roller • R 320-2620 sanding unit • Roller diameter: 320 mm • R45 rubber-coated roller, 45 Shore hardness • 15 kW motor with frequency inverter • Oscillating abrasive-belt blowing and cleaning system 2nd working position - brush unit Bwjdpfx Akjzyghljnow • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 3rd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 4th working position - superfinishing sanding pad • S-2620 unit with superfinishing sanding pad • PE 32/L EPICS electronic sectional sanding pad • Segment pitch: 32 mm • 11 kW motor with frequency inverter • Electronic working-pressure control • Oscillating abrasive-belt blowing and cleaning system   Outfeed finishing unit • SB/U oscillating finishing unit • SB 200 UFC Ultra Fine brush roller • Silicon-carbide fibres • Rotating blowers for final workpiece cleaning Additional equipment • Fixed working height of 900 mm • BL 32 electronic infeed panel-reading bar • EPICS electronic sectional-pad system • Vacuum conveyor system with motor up to 7.5 kW • Perforated vacuum conveyor belt • Rubber-coated conveyor belt, 50 Shore hardness • 2.2 kW conveyor-belt drive motor • Front and rear roller support tables • Eye-M industrial PC • 21.5-inch Full HD touchscreen • Maestro Pro-Sand control software • Remote service capability • Operator interface in English and Croatian • CE-compliant version Inspection and terms of sale; The machine is available immediately and can be inspected by appointment at our production facility in Antunovac, Croatia. The machine is offered ex location. Dismantling, loading, transport and installation at the buyer's site will be agreed separately. All technical information is based on the original SCM quotation and the machine identification plate. The buyer may verify the specifications and condition during inspection. Additional photographs, videos, the original technical specification and the relevant SCM documentation are available to serious prospective buyers. Price; EUR 125,000 net, plus VAT - negotiable

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Spindle speed vertical drilling spindle: 2000-6000 rpm Horizontal drilling spindle in X-direction: 2 + 2 Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: xilog Plus DXF interface: Yes Bedpfxozwg H As Akneww Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Safety guard, right: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: used, Year of construction: 2022, Panel saw Manufacturer: SCM Type: NOVA 400 Year of manufacture: 2022 Technical data Length of sliding table: 3200 mm Maximum saw blade diameter: 400 mm Power supply: 400 V Machine weight: approx. 718 kg Equipment Sliding table made of aluminum Bwodpfxs Adr Hle Aknjw Machine start buttons on the sliding table Parallel fence with digital position display Scoring device for clean cuts in composite panels Cross-cutting fence with stops for repeatable cuts Rip fence with position lock Upper saw blade guard on an independent support arm Extension table for large panels Adjustable saw blade height and tilt angle Control panel with emergency stop button Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2017, I sell the panel beam saw SCM SIGMA PRIMA 67 P. Year 2017. Cutting size 3300x2200mm + back loading table. Cutting height 67mm. Main motor 9,0 kW Scoring motor 1,3 kW Bwjdpez Suv Hsfx Aknsw Max saw blade diameters 330 + 160mm Total area covered W.5400mm x D.9900mm 9 pcs. gripper with pneumatic regulation Side alignment with pneumatic stroke. Wincut optimising software included. Very good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, SCM GABBIANI P80 – Automatic CNC Beam Saw Brand / Model: SCM Gabbiani P80 Year of manufacture: 2022 Location: Croatia Condition: Excellent working condition, currently in production Technical specifications: * Panel dimensions: 3300 × 3200 mm * Main saw motor: 11 kW (15 HP), blade Ø 340 mm * Scoring unit: 1.3 kW, blade Ø 200 mm * Maximum cutting height: 80 mm * Saw carriage speed: 6–60 m/min * Pusher speed: up to 60 m/min * Installed power: 12–15 kW * Compressed air consumption: 300 NL/min * Dust extraction: 4 × Ø120 mm connections, total 2,190 m³/h Equipment: * Maestro Active Cut control system (PC/PLC) * eye-M operator console * Maestro Ottimo Cut optimization software * Label printer * Teleservice module Bodewtgdispfx Akneww The machine is in excellent condition and can be inspected under power. Available due to production reorganization and installation of a new automated SCM Flexstore system. Additional photos, videos and technical information available upon request.

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal price extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows 2) IT integration with a post-processor ----- Machine still in operation, available for viewing! ----- Technical Summary (detailed description available upon request!): ----- - Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine Bwjdpfx Aoy Hl Iyjknow 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: excellent (used), Year of construction: 2020, Equipment: Manual adjustment of the milling spindle with digital display Milling fence with crank adjustment of the fence jaws and digital display Electrical preparation for feed mechanism Speed indicator Right/left rotation of the milling spindle with electrical locking during switching Automatic motor brake CE conformity declaration Technical data: Spindle extension length 140 mm Milling spindle diameter 30 mm Spindle speeds 3000/4500/6000/7000/10000 rpm Overhang of the spindle base from the table 5 mm Dust extraction port diameter 2 x 120 mm INCLUDED OPTIONS: - Milling fence with crank adjustment - Aluminum fence jaws instead of the wooden fence jaws on the milling fence - LL version with 2 cast iron table extensions, length 2500 mm - Motor power: 7.0 kW, 400 V, 50 Hz Bede Aayg Ejpfx Akneww Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex works, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claim. The buyer is free to inspect the machines at the location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Bwodpfxoz Ebzhs Aknjw Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: used, Year of construction: 1995, Window manufacturing line Manufacturer: SCM Type: Method K Year of manufacture: 1995 Technical data Bedpfx Aj Ahn Ihsknsww Tool configuration: - 1st crosscut saw spindle - 2nd mortise and tenon spindle - 3rd profile spindle - 4th profile spindle - 5th hardware spindle - 6th glass bead separator saw Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2011, machine/vehicle number: AH005553, functionality: fully functional, total length: 8,100 mm, overall weight: 4,000 kg, Main specifications: Bsdpfx Akjzvb Uxenjww * Panel thickness: max. 60 mm * Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) * Feed speed: up to 25 m/min * Glue system: EVA / PUR Configuration: * Pre-milling unit * Gluing unit with pressure rollers * End-trimming unit * Top/Bottom trimming unit (rough & fine) * Corner rounding unit * Radius edge scraper * Glue scraper * Buffing unit Machine Condition: * Excellent working condition. * Regularly maintained. * Available for inspection and testing while powered on.

Condition: excellent (used), SCM F520e Planer Bwedpfx Akj Agf Eienow 4 cutting knives, Comb plates on the table, Electrically adjustable feed table, width 520mm, table length 3000mm, adjustable fence, brake, well-maintained machine, quiet operation.

Condition: excellent (used), Year of construction: 2010, -max.width-240mm -work heads 4+1 Bwodpfsz Rnlfsx Aknjw

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,259 kg, This SCM SI 5 panel saw was manufactured in 2019. It features a maximum cutting height of 200 mm at 90° and a sliding table version of 3800 mm, allowing for format cuts up to 3800 x 3200 mm. The machine is equipped with an "EASY TOUCH 7" electronic control unit, enabling up to 999 storable programs. If you are looking to get high-quality cutting capabilities, consider the SCM SI 5 panel saw we have for sale. Contact us for further details. Bwjdps Adti Uefx Aknow - Controlled Axes: Up to 3 axes (Main Saw Height, Main Saw Tilt, Programmed Rip Fence / Scoring Unit positioning) - Voltage: 400 V - Phases: 3 ~ - Current: 22 A - Frequency: 50 Hz - Short-circuit current (Icc): 12 kA - Main Motor Power: 9 kW (12 HP) at 50Hz (with automatic star-delta starter) - Scoring Motor Power: 0.9 kW (S6-40%) - Main Saw Blade Diameter: Up to 550 mm (without scoring blade); up to 450 mm (with scoring blade) - Max. Cutting Height at 90°: 200 mm - Max. Cutting Height at 45°: 130 mm - Saw Blade Swivel: 46° - Saw Blade Speeds: 2500 / 3500 / 5000 RPM - Scoring Saw Speed: 8500 RPM - Cutting Width at Rip Fence: 1500 mm - Sliding Table Version: 3800 mm (Format cuts up to 3800 x 3200 mm) - Exhaust Socket Diameters: 120 mm (on frame), 100 mm (on saw blade guard) - Fence System: Programmed rip fence with THK guide and recirculating ball screw (25 m/min speed), fully swingable under the table - Blade Clamping: "Pro-Lock" system for quick clamping of main saw blade with keyless riving knife adjustment

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: AB / 162765, overall weight: 1,410 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 33 A, We offer this used SCM COMPACT XL 4-side planer, year of construction 2004. Serial number: AB/162765 Year of manufacture: 2004 year Weight: 1.410 kg Nominal voltage: 400 V Phases: 3 Current: 33 A Frequency: 50 Hz Bwedpfoz Hacyox Aknew Short-circuit current: 10 kA If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 630 mm, grinding width: 630 mm, overall weight: 500 kg, grinding height: 160 mm, working height: 160 mm, height adjustment type: electric, type of input current: three-phase, SCM Sandya Win wide belt sander Working width: 630 mm Sanding height: 3 – 160 mm Bsdpfj Agvzzsx Aknjww 1 combi unit Electric height adjustment Optical oscillation Two feed speed options Main motor power: 5.5 kW

Condition: excellent (used), Year of construction: 2019, Clean air filter (filter class M, filter bags, i.e. suitable for fine dust) Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Intake nozzle diameter: 300 mm Max. volume flow: 5,750 m3/h Negative pressure at rated flow: 3,100 Pa Filter area: 30.0 m2 Number of filters: 60 pcs Compressed air cleaning Incl. integrated pre-separator Incl. integrated extinguishing system (connection to the water supply) Chip collection volume: 3 x 250 l Sound pressure level: 75 dB(A) Incl. dust baffle Incl. CE & all documents Bodpfx Ake Aazbweneww Dimensions L x W x H = 3435 x 1100 x 2440 mm Weight 850 kg Note regarding used machines: • Subject to errors in technical data and prior sale. • Indicated prices are ex-works prices, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machine on site. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, input voltage: 380 V, input frequency: 50 Hz, Equipment: CE marking, SCM T150N mortiser – used machine, arriving at our warehouse. - Extension tables - Rotation reversal - Inverter - Manual spindle lifting and tilting - V380/50 - CE ID CODE: TOU-058 Bwsdpfx Aks Agu Eijnsw

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Bsdpfx Akj Ad Igzjnsww Loading: December 1st to December 10th. TECHNICAL DETAILS WORK AREA Table dimensions: 900 × 770 mm Additional work table: 1,000 × 300 mm Table height adjustment: 115 mm ROUTING HEAD Speed: 10,000–20,000 min⁻¹ Swivel range of routing head: 0–60° Spindle stroke: 135 mm Spindle diameter: 85 mm MACHINE DETAILS Manufacturer: SCM Type: R9 Year of manufacture: 1977 Machine type: Overhead router Dimensions (L × W × H): 1,650 × 1,250 × 2,000 mm Weight: 1,500 kg

Condition: excellent (used), Catalog number 8139 TECHNICAL DATA - max. diameter of the main saw blade with a scoring saw: 300mm - max. cutting height: 100mm - main saw blade adjustable up/down + angle, manually - spindle diameter: 30mm - with a crosscut fence - cutting length on the fence: 3200mm - cutting width adjustable manually with the fence: 1300mm - with a side fence - with a scoring saw - max. diameter of the scoring saw: 120mm / 8500 rpm - spindle diameter: 20mm - main motor: 5.5kW/4000 rpm - diameter of the dust extraction port: 60mm Bwods Ahnhfjpfx Aknew - dimensions of the table with extension and widening: 1730x1390mm - blade guard - dimensions (L/W/H): 3420x3860x1150mm - weight: approx. 800kg ADVANTAGES – Italian made – with a scoring saw – unpainted – DTR documentation – used saw, very good condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2003, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planing width: 230 mm, overall weight: 3,000 kg, number of spindles: 5, Planing and Moulding Machine / Four-Sided Planer Manufacturer: SCM Model: Superset XL Bwsdpfx Asz N Amzsknow Year of manufacture: 2003 Planing machine with 5 spindles (bottom-right-left-top-universal), previously used in a parquet production facility. Working width: 230 mm Working height: 120 mm Feed speed steplessly adjustable, approx. 5 - 25 m/min. Spindle arrangement: Bottom Right Left Top Universal spindle Weight approx. 3000 kg