Used Scm Flex 1 for sale (654)

Condition: good (used), Year of construction: 2000, functionality: fully functional, Wide belt sander SCM Sandya 40 M1 Year of manufacture 2000 S/N AE/020761 Manufacturer SCM Group S.p.A Italy Sanding width 1.350 mm Workpiece thickness min 4-170mm 1 sanding unit, calibration 250mm diameter Roller hardness °Shore 55 Vacuum table Main motor 11 kW ( 15 HP) Sanding belt length 2,620 mm Nwodpfx Aaetttafj Uok Feed max 19 m/min Feed stepless Fixed working height 900 mm Sanding belt blow-off device Electropneumatic segment control Belt change side left SYEL CN 51 control unit Carpet feed with speed controller Electronically controlled sanding belt oscillation Main motor with disk brake Rubber-coated pressure rollers Automatic carpet centering Automatic table positioning Air requirement Nl/min 15 Operating voltage 400V/ 50 Hz Total power 40 Amp Dimensions: L x W x H= 1917mm x 2134 x 2365mm Weight approx. 2540 kg

Condition: good (used), Year of construction: 2005, machine/vehicle number: AA1/014879, functionality: fully functional, input voltage: 400 V, input current: 106 A, input frequency: 50 Hz, type of input current: three-phase, We offer this very good SCM RECORD 110 AL machining center, year of construction – 2005. Serial number: AA1/014879 Machine number: 2966282040H Reference: 052635 Supply voltage: 400 V Number of phases: 3 Operating current: 106 A Short-circuit current rating: 10 kA Frequency: 50 Hz TECHNICAL DETAILS Processing type: Drilling, milling Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel passage: 200 mm Number of working fields: 2 Table type: Flat table Table configuration: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Nwsdpfx Aszua Tdoa Uek Number of drilling units: 1 Installation position: top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: top Controlled axes: 5 Spindle cooling: liquid cooling Grooving unit Number of grooving units: 1 Installation position: top Design: fixed grooving unit Grooving direction: X-direction If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 1992, functionality: fully functional, operating hours: 100 h, power: 5.5 kW (7.48 HP), spindle diameter: 30 mm, overall weight: 900 kg, Equipment: documentation/manual, Table saw, SCM, type T130, used very little, in exceptional condition. Spindle diameter: 30mm, motor power: 5.5kW, with motor brake, etc. Nwedpfozwwb Dox Aa Usk

Condition: used, Year of construction: 2003, equipped with Tersa cutterblock and electric height adjustment, tables measured with top precision max. 1/10 mm completely set up used top condition cleaned functionally tested Nwodpjzd Hdnefx Aa Ujk partially refurbished Manufacturer: SCM Type: FS 410 Year of manufacture: 2003 Machine no.: 159435 CE type-tested GS dust-tested Number of cutters: 3 Feed rate m/min: 6 + 12 Bridge guard Slotted table lips Low-noise table lips Motorized automatic brake Tersa cutter system Rubber draw roller Digital display for planing height Electric height adjustment with fine adjustment Extraction hood integrated Motor kW: 5.5 Planing width approx. mm: 410 Planing height approx. mm: 240 Table length approx. mm: 2100 New price approx. €: 7500.00 Extraction connection mm: 100 Space requirement approx. L x W x H mm: 2100x900x1300 Weight approx. kg: 710 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: CE marking, documentation/manual, CNC NESTING SCM PRATIX S22-31B with AUTOMATIC UNLOADING TECHNICAL FEATURES • Moving gantry, with Bumper safety system • 3 controlled axes: X, Y, and Z • Travel speed on the axes: X: 35 m/min Y: 35 m/min Z: 15 m/min • Usable working area in X: 3,086 mm • Usable working area in Y: 2,155 mm • Usable working area in Z: 150 mm • PRO-SPACE safety system. With this system, the machine does not require perimeter guards or safety mats; the operator has free access to the work area from any side. • MATRIX aluminum table, 2,220 mm x 3,150 mm • 16 retractable pneumatic stops on the table (6+6 in Y and 4+4 in X) • 8 MPS 130x130 mm suction cups, H=25 mm • 4 MPS 150x50 mm suction cups, H=25 mm • SCM TECPAD remote control with digital display, with its corresponding resting base • Lubrication of the guides by means of a centralized drive pump • 2 vacuum pumps of 250 m3/h each, located under the machine structure • Xilog-Plus control software • Maestro Nesting software. Rectangular nesting • DXF file import • Pusher for evacuating finished parts, with vacuum cleaning system • Motorized belt table for material unloading, with photocells to read parts at the end. 3,200 mm x 2,180 mm • CE COMPLIANCE • Machine in excellent condition. Year of manufacture: 2014 • Supplied with the instruction manual, machine exploded view diagram, and electrical diagram. OPERATIONAL GROUPS: ROUTER • Electro-spindle power: 6.6 kW / 9 HP. 0 - 24,000 rpm • Air blowers Nwedezav Hxspfx Aa Ujk • Mount that allows for the attachment of a horizontal tool • Linear tool changer, TR13 model, with 13 positions • ATC for HSK F63 tool holders • Calibration sensor to automatically measure tool length MULTIPLE DRILLING UNIT • 7 vertical drill holders • 1+1 horizontal drill holders in the X direction • 1+1 horizontal drill holders in the Y direction • 1 vertical disc in the X direction

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Spindle speed vertical drilling spindle: 2000-6000 rpm Horizontal drilling spindle in X-direction: 2 + 2 Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Safety guard, right: Yes Extraction hood: controlled via axes Nwodpjzwg H Ajfx Aa Uek Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: used, functionality: fully functional, SCM F410 Planer/Thicknesser Specifications: • Condition – used, inspected • Manufacturer – SCM • Model – F410 • Working width – 410 mm • Bed length – 2610 mm • Adjustable infeed table angle • Motor power – 3.0 kW • Spindle speed – 5000 rpm • Chip thickness indicator • Max. removal depth – 8 mm • Noise-reducing combs near the shaft • 4-knife shaft with a diameter of 120 mm for traditional knives • 0-1 start • Weight – approx. 650 kg • Overall dimensions: 261 x 85 x 105 cm (L x W x H) Additional information: • The machine is in good technical condition and ready for immediate use • The photos show the actual condition of the item • Possibility to turn on and test the machine on-site • Free training on machine operation (at our company premises) • The price listed in the auction does not include VAT and transport costs Financing and transport: Njdpfxozd Stbs Aa Uswk • We organize transport using MDD’s fleet, courier companies, or external carriers • We offer financial support in the form of leasing or leasing financing

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, grinding width: 1,100 mm, power: 11 kW (14.96 HP), height adjustment type: electric, Refurbished automatic wide belt sander suitable for calibration of solid wood and sanding of veneered components. The SANDYA 10 model belongs to the higher range of SCM automatic wide belt sanders, characterized by an exceptionally rigid frame, top-quality sanding performance, and versatile applications. 2 units: roller + roller with platen and shared 11 kW motor 1. Calibration roller - steel 2. Sanding roller - soft rubber + pneumatic sanding platen Sanding width: 1100 mm 2 feed belt speeds Automatic thickness measurement Motorized thickness adjustment with display + fine-tuning Table extensions at infeed and outfeed Pneumatic oscillation Very good technical condition, completely refurbished Czech manual available CE safety standard Suitable for calibration and sanding of solid wood and veneer EXCELLENT TECHNICAL CONDITION Nsdpfx Aaewx I Tpe Uowk The machine is refurbished, set up, and tested.

Condition: used, Year of construction: 2005, functionality: fully functional, New in the offer SCM MB 21 / HOLZKRAFT TECNOMAX MB21 Multi-spindle drilling machine Table width: 905 mm Maximum drilling stroke: 60 mm Drilling spindles: 21 Drill spacing: 32 mm 2 parallel stops Pneumatic tilting drilling block Pneumatic workpiece clamping Pneumatic clamping: 3 Workpiece support: standard table Drilling depth adjustment: turret-type stop Conformity marking: CE mark Weight: 267 kg Nsdpfx Aszaddfea Uowk Space requirements: Length: 1 m Space requirements: Width: 1.1 m Space requirements: Height: 1.3 m

Condition: excellent (used), Year of construction: 2010, SCM SP1 Thicknessing planer Nwjdpfx Aozqhfmoa Uok Working width 520 mm Working height 250 mm Electric height adjustment of the worktable Planer cutter block with 4 knives 4 feed speeds: 5/8/12/18 m/min Main motor with a power of 5.5 kW Year of manufacture 2010

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Nsdpfx Aaeyymz Us Uswk Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, workpiece width (max.): 1,200 mm, number of slots in tool magazine: 6, overall weight: 2,500 kg, Vertical drilling, routing and grooving CNC machine ideall for furniture production. Model: Morbidelli CX210 Manufacturer: SCM Group Production year: 2021 State: very good Weight: 2.560 kg Panel´s working dimensions: - min. dimensions: 200 x 50 x 8 mm - max. dimensions: 3.050 x 1.300 x 95 mm 3 axis electrospindle + 6 pos. toolchanger Nwodpjzutgwofx Aa Usk - tool attachement: HSK 63F - RPM: 1.500 - 24.000 /min. - power: 6,6 kW Drilling head F31LTC (RO.AX) - vertical spindles: 21 pcs - horizontal spindles: 3+3 in X, 2+2 in Y - 1x saw blade in X - 1x drilling head for hinges 45/9,5mm (can be changed for different type) Other equipment: - control panel Eye-M with touchschreen (21"), Windows 10 - 2 independent clamps - 3D probe for detection of precize panel´s dimensions (length, width, thickness) - control PC - Maestro Active + Maestro CNC - remote controller - automatic lubrication Machine availability: September 2026 It is possible to see the machine in run.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Wide Belt Sander SCM Sandya S600 RCS 110 | Excellent Condition | Year of Manufacture 2015 For sale is a high-quality wide belt sander from SCM (Sandya S600 RCS 110) in very good condition. The machine is fully operational and ready for immediate use. Working width: 1,100 mm Working height: 4–170 mm Main motor: 15 kW Belt speed: 3–16 m/s Feed speed: 3–18 m/min Belt length: 2,150 mm Nwodpfoy Hn U Aex Aa Ujk Steel calibration roller R (Ø 140 mm) Combination unit CS: Rubber roller (Ø 160 mm, 30 Sh) Electronic segmented pad (segment width 30 mm) Year of manufacture: 2015 Well maintained, technically flawless All information provided without guarantee. Technical data according to manufacturer or previous owner. Subject to errors, changes, and prior sale. No guarantee or warranty.

Condition: ready for operation (used), Year of construction: 2010, Equipment: CE marking, SCM Cyflex 900 Year 2010 No routing unit Machine in perfect condition Njdjzka Awjpfx Aa Ujwk Direct available

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Nwsdpszcmcvofx Aa Ujk Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: used, Technical specifications: Track width: 300 mm Max. cutting height: 120 mm Max. saw blade diameter: 350 mm Min. saw blade diameter: 200 mm Nwjdpfx Aaszhumxs Usk Saw blade speed: 4200 rpm Infinitely adjustable feed rate Automatic lubrication system Anti-kickback protection Laser marker Culaga Dust extraction port: 200 mm Safety switch Power supply: 380 V Main motor power: 26 kW Overall dimensions: Length: 2200 mm Width: 1800 mm Height: 1850 mm

Condition: used, Technical specifications: Max. planing width: 190 mm Max. planing height: 120 mm Spindle diameter: 35 mm Number of spindles: 4 Spindle arrangement: bottom: 5.5 kW right + left: 5.5 kW top: 5.5 kW Gear-driven feed rollers: 3 Dust extraction port diameter: 150 mm Feed system with universal joints Nwedpfx Aaszguwnj Usk Lubrication pump for the work table Pressure: 6 atm Electric lifting of the machine body Power supply: 400 V Overall dimensions: Length: 3300 mm Width: 1230 mm Height: 1730 mm

Condition: excellent (used), Year of construction: 2019, Combined jointer and thicknesser SCM minimax fs 41e Year of manufacture: 2019 Power of drive motor: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Planer cutterhead type: TERSA – 4 cutterheads Speed: 5200 rpm Planing width, max.: 410 mm Feed rate: 6 / 12 m/min Dust extraction port: 2, diameter for thicknessing: 120 mm Jointer Infeed table, length: 1034 mm Chip removal, max.: 5 mm Dimensions and weights, length: approx. 2000 mm Width/depth: approx. 1110 mm Height: approx. 1115 mm Weight: approx. 430 kg TERSA cutterhead system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and uniform material feed. Material feed with two speeds. Nedpfx Aaezi Nhmo Ujwk Numerical display for thickness table height. The 2,000 mm long jointer tables facilitate easy jointing of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them resistant and permanently flat. Sturdy, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height. The high machine weight ensures the highest precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction.

Condition: good (used), Year of construction: 2007, machine/vehicle number: AA1/016112, functionality: fully functional, overall weight: 3,900 kg, table length: 3,050 mm, table width: 1,240 mm, Equipment: CE marking, documentation/manual, SCM RECORD 100 AL. 4 axis • 4 controlled axis: X, Y, Z y C X: 60 m/min Y: 45 m/min Z: 30 m/min • Aluminiun working table, nesting type: X: 3.050 mm Y: 1.240 mm • 2 working areas • 6 perimetral pneumatic reference cylinders • Vacuum pump BECKER: 250 m3/hour • Telecomand • XILOG PLUS software. Allows importing DXF files • Security fences • Security carpets • CE rules • Year 2007 ROUTER UNIT 8,5 kW / 11,5 HP 0 to 24.000 rpm Automatic Tool Change System HSK F-63 12 positions rotative tool magazine MULTIDRILL UNIT 7 vertical boring heads 1+1horizontal boring heads X 1+1horizontal boring heads Y 2.000 to 6.000 rpm SAW UNIT Cutting in X Diameter: 120 mm Nedpfjzg H Sdjx Aa Uswk 3.500 to 7.500 rpm

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: A1/000156, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 16,000 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 300 mm, number of axes: 6, number of slots in tool magazine: 8, controller manufacturer: Routech- Quicklink, actuation type: electric, total height: 3,270 mm, total length: 32,100 mm, total width: 6,250 mm, overall weight: 21,000 kg, table length: 12,000 mm, table width: 1,000 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Routech OIKOS 12/19x1.25 – CNC 6-Axis Machining Center for Timber Construction For sale is a Routech OIKOS 12 CNC-controlled 6-axis machining center, designed for the precise processing of solid and laminated timber components for structural wood construction. Nwjdpfeyu Upuox Aa Uek This machine is suitable for the production of structural elements for single-family homes, hall construction, conservatories, carports, garden sheds, playground equipment, as well as general engineered timber construction. It enables complete processing of beams in a single pass – without the need for manual repositioning of the workpiece. Technical Specifications 6 interpolating CNC axes (X-Y-Z-B-C-A) Routech OIKOS 12 Max. workpiece length: 19,000 mm Max. cross-section: 1,250 x 300 mm Min. cross-section: 50 x 20 mm Max. workpiece weight: 1,250 kg (optionally up to 2,500 kg) Voltage: 400 V / 50 Hz Axis travel speeds: X: 107 m/min Y: 75 m/min Z: 28 m/min Rotary axes: A ±140° B ±180° C ±300° Milling Unit 6-axis special milling head TLT 1 (SCM Group) with: 13 kW continuous power (S1) Inverter power 18 kW Spindle speed up to 18,000 rpm HSK 63E tool holder Liquid cooling Processing in one pass: Milling, sawing, slotting, drilling, profiling, cross-cutting – all sides of the workpiece without re-clamping Tool change system Disc magazine “Rapid 8” with 8 tool positions Max. tool diameter: 360 mm Max. tool weight: 8 kg Additionally equipped with: Motorized saw unit Slotting unit with chain Preparation for adapter units Material Handling C-type buffer zone with 6 conveyor belts and 6 clamping chucks, length 13,500 mm Automatic unloading system 13,500 mm with 6 support beams Automatic waste conveyor for offcuts and chips Continuous processing of multiple workpieces possible. Control & Software CNC with PC Office ROUTECH QUICK-LINK user interface BTL data import from common CAD/CAM systems 3D simulation with collision check Restart after program interruption possible Separate simulation station “SIMOIKOS” for office workstation Safety & Equipment Enclosed safety cabin with Lexan viewing panel Photoelectric sensors at infeed and outfeed 2 extraction ports in the work area Air-conditioned control cabinet, CE compliant Summary The Routech OIKOS 12 is a high-performance CNC machining center for modern timber construction. With its 6-axis technology, high traverse speeds, complete 5-sided processing without re-clamping, and integrated material logistics, the machine is ideal for joineries and timber construction companies engaged in industrial production. Suitable for companies seeking precise, repeatable, and economical solutions for timber joinery processing.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Nsdpfxow Npyqj Aa Uowk Horizontal drill Y: 2 Grooving saw: Yes Stationary machine: Yes Clamping system: Clamps Safety: Light barrier Control and software SCM XILOG Minimum footprint: 3920x1170x2150

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 2933751040F, functionality: fully functional, operating hours: 3,940 h, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 9 m/min, actuation type: pneumatic, total length: 2,540 mm, total width: 1,485 mm, overall weight: 670 kg, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, We are offering this very well-maintained SCM OLIMPIC K201 edge banding machine, manufactured in 2005. Machine features: with pneumatic trimming unit, flush-cutting unit, radius/flush-routing unit, radius-pulling blade unit, polishing disc unit. Price: 4,900.00 EUR net ex works Rodgau plus VAT, loading costs and shipping. If you have any questions or require further information, please feel free to send us a message or call us. Nwjdpfx Aaezmxxie Uek

Condition: used, Year of construction: 2012, GENERAL FEATURES: CNC machining center with a fixed machine table and a moving tool carrier in a portal design for drilling and milling operations on panels made of various materials (chipboard, MDF, solid wood, plastic, etc.). MACHINE STRUCTURE: The base structure is a monolithic design made of thick-walled material, reinforced by welded-in parts across the entire machine bed, making it extremely stable. The table design, with a large base, ensures long-lasting precision and stability. The machine layout allows the user an optimal workflow despite a minimum of space. The mobile portal carrier is made from a solid monoblock. It is positioned in the X-direction on prismatic, ground guides using ball screw slides. On this mobile tool carrier, the working unit is in turn attached to prismatic, ground guides and the ball screw slide. Axis movement is achieved using "brushless" motors in the X/Y/Z axes. The drive system operates in the X-axis via a pre-tensioned precision rack and pinion drive, and in the Y/Z axes via ground ball screws of the highest precision class. AXIS MOVEMENT: The movement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the working unit along the moving portal (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. STANDARD MACHINE DESIGN: Milling spindle with 5-axis positioning, 11kW (15HP), HSK63, 1200-20000 RPM. The machining unit consists of a powerful 11 kW (15 HP) motor, which is liquid-cooled and capable of 5-axis positioning. This feature enables machining operations to be performed with a tool that can be oriented in any direction; therefore, fewer angular movements are required. The base structure of the milling unit is based on a design with two non-orthogonal axes that intersect next to the tool. This feature guarantees a robust carrier for heavy-duty milling applications. Thanks to the non-orthogonal axes, it is possible to perform numerous repositionings without using too much space. This allows the machining of complex geometries without the risk of collision with the workpiece and achieves an angle of -10° in relation to the machine table. All machining operations are facilitated by the small dimensions of the group in relation to the rotation axis of the spindle: when the group is in a horizontal position, the dimension is only 35mm. WORK TABLE TV: The work table is designed to guarantee the operator maximum "freedom of movement." The vacuum quick-change clamping system provides maximum flexibility with precise positioning and optimal work piece holding. The table consists of moving consoles that are adjusted in the X-axis on ground guides with ball screw shoes and a special profile to ensure Nwodpfjzrvvvox Aa Uek

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 80 mm, number of axes: 3, overall weight: 5,200 kg, spindle motor power: 7,500 W, spindle speed (max.): 24,000 rpm, This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details. Nwodpfjzuhcgsx Aa Usk • Number of milling spindles: 2 • Tool clamping system: HSK-F63 • Vertical drill spindles: 96 • Horizontal drills (X/Y): 32 / 4 • CE mark Additional equipment • Barcode reader • Enclosed fence • Light barrier • DXF interface • Software: SCM XILOG PLUS

Condition: ready for operation (used), Year of construction: 2001, Model SCM RECORD-130 TV Year of manufacture: 2001 Work table: 2930 x 1245 Spindle: HSK63F, 11 kW Vector axis Laser for positioning the suction cups 4x lifting devices Nwodpfxjzmmmbe Aa Usk Conveyor belt for chips 12x tool changer Milling spindle for lock case or saw F18 drilling head Clamping devices