Used Scm Si 15 Wf for sale (664)

Condition: good (used), For sale is a used SCM panel saw with a cutting length of 3000 mm. The machine has been inspected and refurbished by our service team and is in good condition. Dcodpfsza Dqfjx Aptel Technical data: - Cutting length 3000 mm - Cutting width 600 mm - Cutting height 135 mm - Max. saw blade diameter 400 mm - Dust extraction connection 120 mm - Motor power 5.5 kW / 7.5 hp The panel saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Saw, circular saw, panel saw Reference: R-A0074

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Dedpfsv S Uz Iox Aptocl Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: excellent (used), SCM SI 400 EP panel saw Sliding table 320 cm, Motorized tilting 0–45 degrees Motorized up/down blade adjustment, Right-side rip fence motorized adjustable up to 1500 mm, Manual scoring unit adjustment, 9 kW motor, 3 blade speeds, Max blade diameter 400 mm, Sliding table fence adjustable for angle Dcjdpsy Rzphofx Aptjl Used machine, in very good condition.

Condition: used, Year of construction: 2006, functionality: fully functional, power: 75 kW (101.97 HP), cutting width (max.): 1,270 mm, sliding table length: 3,800 mm, CIRCULAR SAW SCM MOD. SI450 N - Carriage mm. 3800 - Cutting width 1270 mm on parallel fence - Motor 7.5kw - Year 2006 (CE) Djdpfx Apemzbm Rjtjcl

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Dsdpfx Apjy H N Tmjtecl Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: new, Basic equipment and accessories10-year guarantee on the guide system of the saw carriage- Saw carriage with anodized aluminum profile guide made of hardened,ground and flanged steel guides- Saw carriage length 3200mm- "READY" electronic control, 2-axis control (3rd axis onrequest) with:- Height adjustment and inclination of the saw unit (control of therip fence on request)- Management of the tool data with automatic correction of theCutting height in relation to the angle of inclination of the saw blade- Manual, semi-automatic and automatic mode with 99storable work programs- Additional functions: calculator and hour meter- Trimming frame for quick positioning of the stopmiter cuts- Table extensions in the outlet- Cutting length at the rip fence 1270 mm- 2-axis control with 99 programsMotor 7kW 50Hz (8kW 60Hz)- Motor with direct connection with push buttons- Three main saw blade speeds- Scoring unit with independent motorization, externally adjustable andStops for easy saw blade positioningSecurity/Protection- Emergency stop button on the front- Emergency stop button on the side near the rip fence (Version CE)- Thermal protection switch- Saw blade swing protection (version CE) integrated suction, suction nozzlewith a diameter of 80 mm- Saw blade swing protection with integrated suction, suction nozzle with 80 mmdiameter- Automatic motor brake on the main saw blade (CE version)- Lockable main switch- 110 V auxiliary circuit- CE Declaration of Conformity (CE version)Technical specificationsMax cutting height at 90° (mm) 140 with blade 400Max cutting height at 45° (mm) 97 with blade 400Saw blade tilt (degrees) 45Programmed lifting and swiveling of the saw blade unitSaw blade speed (rpm) 3000- 4000- 5000Scorer speed (rpm) 8500Main engine power (S6 -40%) kW (hp) 50 Hz 7 (9.5)Scoring unit power (S6 -40%) kW (HP) 50 Hz 1.3 (1.7)Format cuts:- with trolley 1600 (mm) n.a.- with trolley 3200 (mm) 3200x3200Cutting width for parallel cuts (mm) 1270Suction nozzle diameter:- on frame (mm) 120- on the saw blade guard (mm) 80- on the riving knife (mm) n.a.Net weight base machine (kg) 1050109999 Execution according to safety regulationsR10078 nova si 400ep CE version930731 volts 400 EU931201 Frequency 50 Hz570343 Digital readout for rip fenceComplete with:- Digital display and magnetic tape570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star/delta switch kW9 HP12 Hz50 (kW11 HP15 Hz60)083202 base109993 MACHINE LANGUAGE: German Dcedjvxr Skspfx Aptol

Condition: new, Year of construction: 2025, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, cutting length (max.): 3,200 mm, main saw diameter: 400 mm, CIRCULAR SAW model SCM SI 4 . CN NEW machine in prompt delivery CE regulation: YES CN control "READY" 2 controlled NC axes (lifting and tilting of the blade) - blade lifting and tilting management - tool data settings with automatic correction of the height of the blade with respect to the inclination - electric and automatic NC mode with 99 storable programs digital display on the parallel guide n.02 reversible stops on the squaring guide extension floor out with scoring unit : YES max diameter saw blade 400 mm Djdoglp I Nepfx Aptscl length of the squaring carriage mm 3200 main blade motor power Hp 9.5 scoring unit motor power Hp 1,7 3 main blade rotation speed rpm. 3000 /4000 / 5000 volt. 380/50

Condition: excellent (used), Year of construction: 2019, Holzkraft Panel Saw Si 400 es Year of manufacture: 2019 Table dimensions: 940 x 560 mm Table height: 900 mm Cutting length: 3200 mm Sliding table dimensions: 360 x 142 x 2600 mm Max. cutting height 90°/45° with scoring unit: 138 / 98 mm Max. cross-cut width to the left of saw blade: 3260 mm Cutting width with rip fence: 1270 mm Saw blade tilting range: 90° - 45° Dcedeyyax Hspfx Aptsl Max. saw blade diameter: Ø 400 mm Scoring blade diameter: Ø 120 mm Main saw blade speed: 3500/5000 rpm Scoring unit speed: 9200 rpm Motor power: 400 V / 50 Hz / S6 - 40% 7 kW (9.5 HP) Scoring unit motor power: 0.55 kW (0.75 HP) Extraction port diameter: 120 mm Blade guard extraction port Ø: 80 mm Weight approx. 680 kg

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Dcedpfow Enw Ijx Aptsl

Condition: used, Year of construction: 2015, Colour: White Weight: 4.000 kg - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AE/034421 - Main motor power [kW]: 9.0 - Software: Wincut 12.2.9 - Saw blade bore diameter [mm]: 80 - Max. saw blade diameter [mm]: 320 - Max. cutting length [mm]: 4150 - Max. cutting width [mm]: 2200 Dcedpfx Apszzb I Nstjl - Max. cutting height [mm]: 67 - Spindle speed: - └ Min. spindle speed [rpm]: 1000 - └ Max. spindle speed [rpm]: 5000 - └ Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 21 - Fuse [A]: 32 - Power [kW]: 8.4 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 1,000 mm, total height: 1,600 mm, Colour: Grey Empty weight: 1.300 kg Dimensions (LxBxH): 340 x 100 x 160 cm Four-sided planer SCM Sintex 380V 4 spindles Spindle below / above 7.5kW Spindle left/right 7.5kW Max working height 105mm Max working width 180mm Input table 2300mm Spindle diameter 40mm Total dimensions 3400x980x1600mm (LxWxH), weight 925kg - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 4 - Min. planing height [mm]: 100 - Feed table length [mm]: 2300 Dsdsyw Sg Djpfx Aptjcl - Feed roller diameter [mm]: 120 - Feed motor [kW]: 7.5 - Diameter extraction nozzle [mm]: 120 - Voltage [V]: 380 - Transport dimensions: 3400mm x 1000mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg Dcjdpfxjhvan Is Aptol INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2001, Bottom / right / left / top with Centro Fix cutter heads. Min/Max. working width (finished dimension): 23 - 180 mm Min/Max. working height (finished dimension): 6 - 105 mm Dcodpfx Apsym D Eistsl Min. workpiece length: 300 mm Feed rate: 6 / 12 rpm Spindle speed: 6000 rpm Spindle diameter: 35 mm Motor power, horizontal spindles: 7.5 kW Motor power, vertical spindles: 5.5 kW Feed motor power: 1 kW Diameter of feed rollers: 120 mm Dust extraction nozzle, 1 piece: 150 mm Dust extraction nozzle, 2 pieces: 120 mm Weight: approx. 950 kg Location: Nattheim

Condition: excellent (used), Year of construction: 1993, Manufacturer: SCM Model: T150 Class Year of manufacture: 1993 Dedjyx Nadjpfx Aptocl Motor upgraded: 5.5 kW Tilting range: -10° to +45° Electromagnetic brake Motor with 2 speeds / pole-changeable Speed settings: 3000/4500/6000/7000/10,000 rpm Forward/reverse rotation Table size: 2700 x 700 mm Spindle diameter: 30 mm Table extension: 2 x 650 mm Extendable frame support Aluminum fence jaws Milling fence with fine adjustment - Electric height adjustment - Electric tilt adjustment Feeder: Wegoma VS 44 - 4 rollers Extraction connection: 120 x 120 mm Space requirement: approx. 2700 x 1300 x 1600 mm Weight: approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery as-is, as inspected and function tested without refurbishment, without warranty or guarantee

Condition: new, Year of construction: 2025, FS 41 classic Tersa – Jointer-planer with TERSA quick-change cutterhead system With TERSA cutterhead for ultra-fast cutter blade changes TERSA cutterhead system enables particularly quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed The particularly long, one-piece jointer tables allow for easy planing of workpieces Large jointer fence can remain in its position when the jointer tables are opened Rear-opening jointer tables The high machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction Model: FS 41 Classic Tersa Item No.: 5503414 Technical data ---Technical data, jointer--- Total length of tables: 1800 mm Feed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. chip removal: 4 mm ---Technical data, planer--- Dimensions of planer table: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speeds: 7 m/min Cutterhead diameter/cutter blades: 72 mm / 3 pcs. Speed: 5200 rpm Dcedpfxecnxayo Aptsl Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 hp) Dust extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa cutterhead No more adjusting and screwing Cutter blade changes in seconds Self-locking Particularly quiet Planing unit Massive anti-kickback devices prevent workpiece kickback 3-blade Tersa cutterhead for optimal planing result Wood feed Helically toothed steel infeed rollers for a constant and uniform wood feed without marks 13 teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Dust extraction hose connection The dust extraction ports of the jointer (1) and planer (2) point in the same direction The hose connection is made from only one side No hose is needed that extends around the machine

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Dsdpfxshp Rc Ie Aptjcl Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 – Combined Saw-Milling Machine With pivoting saw blade, pivoting milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel distance 2250 mm) Large extension table (900 x 600 mm) with extendable aluminum telescope fence Max. saw blade diameter 315 mm with scoring device, pivotable from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large, double-bearing milling unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3,500 - 10,000 rpm With clockwise/counterclockwise rotation of the milling spindle Standard arc milling guard Two 5.0 kW motors with high power reserves Cast iron milling unit mounted on both sides at the top precision ball bearings on top close to the pivot point four optimally graduated milling speeds, which enables the sharpening of workpieces Powerful motors Industrial motor, 100% duty cycle for continuous operation (full load) suitable Scope of delivery: Arc milling guard Anodized aluminum format sliding table Aluminum fence jaws Folding stops Technical data Dimensions of cast iron work table 1112 x 430 mm Fence length 2250 mm max. saw blade diameter with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. crosscut width 2660 mm Dcsdpecnwydefx Aptsl Saw blade pivot 90° - 45° Cutting width 900 mm Speed 4000 rpm Table saw - Spindle pivot 90° - 45° Spindle working length 100 mm max. tool diameter 210 mm max. tenon tool diameter 275 mm max. countersinking tool diameter 180 mm Speeds 3,500/7,000/10,000 rpm General - Motor power 400 V/50 Hz/S6 40% 2 x 5.0 kW (6.6 HP) Weight 470 kg Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Woodworking Machines, Table Saws, Minimax twf55 es Article number: 5502261 Stable steel and cast iron construction Anodized aluminum format sliding table Large-sized cast iron milling head, swiveling up to -45° backwards Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Display for height and inclination, accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for lasting precision Powerful 5.0 kW industrial motor Arc milling hood included Made in Italy Dimensions and Weights Length (product) approx. 1200 mm Width/Depth (product) approx. 2000 mm Weight (net) approx. 510 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1200 mm Work table width 530 mm Table height 900 mm Sliding table length 1200 mm Sliding table width 360 mm Sliding table height 142 mm Installation information Space requirement length 2800 mm Space requirement width/depth 2910 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1200 mm Machine body width/depth 846 mm Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Power of drive motor 5.0 kW Milling spindle Spindle inclination 0 to -45° Usable spindle length 125 mm Dcedpfx Apsi Dphtotjl Spindle speed(s) 3500/6000/8000/10000 min¯¹ Milling spindle speed display LED on the front of the machine Spindle arbor diameter 30 mm Milling tool diameter max. Tool diameter max. 240 mm Tool diameter max. with lowering 230 mm Tool diameter max. for profile milling 240 mm Tool diameter max. for mortise milling 320 mm EQUIPMENT Equipment Aluminum sliding table ✔ Milling fence Heavy-duty professional version with hold-down, protective cover and aluminum milling fence cheeks Telescopic miter fence with two folding stops Extension table ✔ Arc milling protection hood ✔ Eccentric clamp ✔ Handle on the sliding table ✔ Spindle height adjustment manual Spindle inclination adjustment manual Control manual height and swivel adjustment of the milling unit Position of control elements on the machine body Location: In stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm Dedpfxezyx Evo Aptscl 6 clamping devices (3 of which with front aligner) 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: used, Year of construction: 1994, used, in top condition, excellent features, many accessories with 3-axis control, pneumatic spindle change, electronic adjustment of the milling fence 99 memory programs, 15 exchange spindles, adjustable table insert Manufacturer: SCM Type: T150 Class Year of manufacture: 1994 Motor: enhanced 6 / 7.5 kW Swiveling range: -10° to +45° Motor brake Motor: 2 speeds / pole-reversing Speed stages: 3250/5000/6500/10,000/min Right/left rotation Table size: 2700 x 700 mm Milling arbor diameter: 14 x 30 mm / 1 x 40 mm Milling arbor mount: HSK Milling arbor quick-change system: SK / HSK Table top extension: 2x 650 mm Frame support: extendable Aluminum fence jaws Milling fence with fine adjustment Digital displays for milling fence: diameter, clamping depth, jaw offset Djdpfx Ajythdvsptscl Protection and pressure device Control panel on top Control panel: swiveling - electric height adjustment - electric swivel adjustment - electric milling fence Positioning control for 3 axes: height/swivel/milling fence with 99 programs Digital displays for swivel angle, spindle height, fence depth Swiveling device for milling fence Socket for feed device New price: approx. EUR 40,000 - 45,000 Dust extraction connection: 120 x 120 mm Space requirement: approx. 2700 x 1300 x 1800 mm Weight: approx. 1073 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, functionality tested without overhaul without warranty

Condition: ready for operation (used), Year of construction: 2017, overall weight: 2,880 kg, This SCM SIGMA PRIMA 67 panel saw was manufactured in 2017. Ideal for precise wood panel cutting, it offers reliable performance for your woodworking projects. Consider the opportunity to buy this SCM SIGMA PRIMA 67 panel saw. Contact us for more information. Machine Benefits Technical Machine Benefits • The panel saw is mainly intended for cutting boards sized 2800 x 2070 mm and these are the formats that were typically processed. The working range of the panel saw is 3800 mm on one of the axes. Extra Information Media Electrical specifications: Voltage: 400 V Phases: 3 Nominal current: 22 A Dcedozug Inepfx Aptel Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AE/034421, functionality: fully functional, cutting height (max.): 67 mm, cutting width (max.): 2,200 mm, saw blade diameter: 320 mm, cutting length (max.): 4,150 mm, spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Cutting length max.: 4,150 mm Cutting width max.: 2,200 mm Cutting height max.: 67 mm Saw blade diameter max.: 320 mm Saw blade bore diameter: 80 mm Spindle speed min.: 1,000 rpm Spindle speed max.: 5,000 rpm MACHINE DETAILS Voltage: 400 V Current consumption: 21 A Fuse: 32 A Power: 8.4 kW Power, main motor: 9.0 kW Total weight: 4,000 kg Shipping packages: 4 pcs. EQUIPMENT Software Wincut 12.2.9 Documentation CE marking The following data is taken from the machine's data sheet (see last image): TECHNICAL DETAILS Sawing unit Diameter of scoring saw blade: min. 160 mm / max. 280 mm Speed of scoring saw blade: min. 1,600 rpm / max. 7,000 rpm Cutting length: min. 1,600 mm / max. 4,500 mm Feed rate of saw blade: min. 0 m/min / max. 100 m/min Drive power Power, main saw motor: min. 5.5 kW / max. 8 kW Power, scoring saw motor: min. 0.75 kW / max. 2.2 kW Power, saw blade feed motor: min. 0.75 kW / max. 0.75 kW Power, feed/return motor of the carriage: min. 0.55 kW / max. 0.75 kW Carriage Dcjdpfszulxfsx Aptol Carriage travel: max. 4,600 mm Feed rate of carriage: max. 25 m/min Return speed of carriage: max. 70 m/min

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Cutting length: 4300 mm Cutting depth: 4300 mm 7.5 kW main blade unit Scoring blade unit 1 fixed front table with air cushion 3 mobile front tables with air cushion Pushing carriage with approx. 7 clamps WinCut software Foot pedal for cycle start and stop Safety guards Dsdpfx Asznz Uioptscl Weight approx. 3277 kg. Available starting September 2026.

Condition: used, machine/vehicle number: 008657, Max. panel width: 3200 mm Dodpfxszvwnno Aptocl Max. panel length: 3200 mm Main saw blade projection: 115 mm No of Grippers: 8

Condition: used, Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding height: 150 mm, input frequency: 50 Hz, - Year of manufacture: 2006 - In stock - After technical inspection - CE certified TECHNICAL SPECIFICATIONS: Dsdpfx Aszinpcjptocl - Working height: 150 mm - Sanding belt dimensions: 150 x 2150 mm - Two sanding belt speeds - Table dimensions: 22 x 144 cm - Both tables adjustable at an angle within the range of 0-30 degrees - Motor power: 3.5 kW / 4.5 HP - Pneumatic belt tensioning and oscillation - Adjustable platen for sanding veneer on one side and a "back" of 15x75 cm on the other - Attachment, protractor for angle sanding - Additional table for profile sanding - Dust extraction port: diameter 140 mm - Overall dimensions: 144 x 71 x 130 cm (length x width x height) - Weight: approx. 450 kg