Used Seam Welder for sale (1,019)

Condition: new, Year of construction: 2025, Seam welding Ledpeh Nu A Nofx Afzerw

Condition: excellent (used), Stud welder Make TRW. Nelson Type Alpha 850 YEAR OF MANUFACTURE 1995 maximum welding capacity studs up to 12 mm welding current continuously adjustable from 100 - 850 A supply voltage 400 Volt , 32 A Transport dimension : length 550 mm width 320 mm Lrodpjvcl T Asfx Afzsw height 380 mm

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition - pulse welding mode - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch Lrjdpfxortvi Re Afzsw - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: excellent (used), Mini FlowPack SVD – a unique device on the market for packaging both individual items and bulk components such as screws, parts, etc. The machine is equipped with a special loading funnel and a film roll holder. It forms a bag from the film, seals the side and top, enclosing the product inside, while simultaneously preparing the next package. Make-Fill-and-Seal Bagging Machine Lrjdpfx Afjxfvk Tszjw This is a manual, vertical flow-pack type packaging machine, designed for producing, filling, and sealing bags in a three-step process. It is ideal for packaging seeds, granules, screws, machine parts, and other solid loose goods (not suitable for powders like flour). The machine uses polyethylene film with a recommended thickness of 40–60 µm. The resulting bag has a width of approximately 160 mm and a length of 50–180 mm. Operation steps: The bag is formed from a roll of film placed on the machine The bag is filled through a dosing chute Sealing and cutting of the filled bag occur in a single step ✅ End-of-sealing audible signal ✅ Lightly used Model: SVD-160/190 – Technical Specifications Power supply (V/Hz): 230 / 50 Installed power: 0.18 kW Bag width: ~160 mm Bag length: 50–180 mm Seal width: 4 mm Sealing time: 0.1 – 1.6 s Max film thickness: 0.06 mm Film roll width: 400 mm only Net weight: 30 kg Machine dimensions (L x W x H): 500 x 500 x 650 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Column-type spot welder PEI MOD. PBP 126 PX Year of manufacture: 2006 CE PEI POINT pneumatic spot welders are user-friendly and ideal for welding all types of metals. This machine is foot pedal operated with pneumatic drive and offers a maximum welding power of 25 kVA. The machine is also equipped with water-cooled electrode holder, electrodes, arms, and transformer. The upper arm is depth-adjustable and the lower arm is height-adjustable. Lrjdpew T Tlfofx Afzsw Used • Pneumatic foot pedal operation • Maximum welding power: 25 kVA • Maximum capacity: 2.0 mm • Electrode force: 165 dan • Throat/Arms: 580 mm • Depth-adjustable upper arm • Height-adjustable lower arm • Steel frame • 400 V, 50 Hz

Year of construction: 2014, condition: excellent (used), From operation resolution: MIgatronic PI 250 DC Year of manufacture 2014 Pulse function HF ignition Water cooling without function Welding range: 5-250Ampere 250Ampere at 30% ED 180A at 60% ED 150A at 100% ED 220 Volt with 8meter torch(sheath partly damaged), ground cable and pressure reducer dimensions in mm approx. 1100x630x720 --Very well maintained unit- Lredem Tit Nopfx Afzow

Condition: new, Year of construction: 2025, The seam welding machine allows you to weld straight sheets and round sheet metal parts in high quality without burning them out. This process is made possible by welding with copper wire. Thanks to the touch-sensitive PLC control panel, all operator errors are eliminated. Technical Specifications: Power supply: 45kw / 380V Range of processed sheets: 0.5 / 1.0mm Mat diameter range: 100-1250mm Working length: 1250mm Lredpfx Aohcr H Sefzsw Working speed: 2-8m / min Air consumption: 1.5lt / min Cooling: mini chiller as an option

Year of construction: 2005, condition: excellent (used), very good condition Lredpfx Asfluucofzjw

Condition: new, Year of construction: 2025, Starweld PE STARWELD PE is a high performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets. The mechanisms are designed in a way that the produced mesh is of high quality, even when the wire processed is of a very small diameter. Products can be used for cages, fencing, etc. Lodpfed Rlaisx Afzerw Features: Line & cross wire feeding from coil Edge trimming Mesh fabric slitting Fully or semi automatic system for mesh cutting, rolling & ejecting Excellent mesh accuracy Fully automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life Specifications Model PE2100 PE2600 PE3100 Mesh Width (mm) 2100 2600 3100 Min Line wire spacing (mm) 25 25 25 Min Cross wire spacing (mm) 12.5 12.5 12.5 Range of wire diameter (mm) 1.2-3 or 1.4-3 or 1.4-3.5 1.2-3 or 1.4-3 or 1.4-3.5 1.2-3 or 1.4-3 or 1.4-3.5 Working speed (strokes/min) Up to 160 Up to 150 Up to 130

Condition: used, weight of the machine ca. 110 kg Lredpfx Afjwf Rg Sszsw dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: air, welding current (min.): 40 A, welding current (max.): 350 A, For sale: Lascentrum Mig 350 DP 40-350 AMP 400 Volt Gas-cooled Pulse Synergic 2/4 Step 4 Roller drive Fixed programs Program memory Steel, Stainless Steel, and Aluminum weldable Refurbished, tested, and serviced. Including MIG/MAG Welding torch, earth work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. Lrjdsxbcqxopfx Afzow All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST shaft length 140 mm roll diameter 62.0 mm throat 100 mm total power requirement manuell kW weight of the machine ca. 50.0 kg dimensions of the machine ca. 560 x 220 x 500 mm Display machine - like new Never been used (!!) Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts Lodpfxexacilj Afzsrw - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft

Year of construction: 2025, condition: new, ADZ SEAM CLOSER CLOSING MACHINE FOR VENTILATION DUCTS The machine is designed to be combined with the Numlock, which is most often used in ventilation systems. It is used for Seam closing of square and rectangular ducts made by Auto Duct Former. Quiet and fast production is achieved. Technical Specifications Lrjdpfx Afefwmtmjzow Power: 3Kw Power supply: 380-400V / 50-60Hz / 3 Ph Current Draw: 7.2A Working speed: 9m / min The thickness of the processed sheets: 0.5mm-1.00mm black steel, 0.5mm-0.70mm stainless steel Dimensions: W: 600 L: 4700 H: 1000mm Weight: 650Kg

Condition: new, Year of construction: 2025, STARWELD PO is a high performance mesh welding line for the production of medium & heavy weight wire or reinforcing mesh panels. It is a line appropriate for big production needs. Design is made in accordance to the specific project & mesh type parameters – e.g. there can be a rolling mechanism for the machine to produce rolls too if so desired. PRATTO can supply all the necessary auxiliary equipment. Products can be used in the construction industry. They are also used for shelves, grids, cages, pallets and containers as well as for fencing (plain & bent). Features: Line wire feeding from coil Cross wire feeding from coil Edge trimming (optional) Panel stacking (optional) Panel tilting (optional) Rolling mechanism (optional) Bending unit (optional) Lsdpfxod Rlalo Afzorw Excellent mesh accuracy Fully automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA Lrsdpfxswf Rgro Afzsw --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 2.5 mm ST shaft length 250 mm roll diameter 96.0 mm throat 160 mm roll speed 6.0 + 13.0 U/min. total power requirement 1.5 kW weight 350 kg range L-W-H 1400 x 550 x 1120 mm Display machine - like new Never been used (!!) Special price upon request Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements Lsdpfxsxachze Afzjrw - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame

Condition: new, Year of construction: 2025, Features: Line & cross wire feeding from pre-straightened and cut bars Automatic feeding of cross wires from hopper Manual feeding of line wires Automatic Panel stacking Excellent mesh accuracy Fully or semi-automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Lrodpfsf Ar N Ujx Afzow Easy maintenance & use High reliability & long life

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC Lsdpfswf Rg Eex Afzorw --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: new, plate thickness 1.20 mm throat 270 (140) mm distance between roll centers 60.0 mm total power requirement manuell kW weight of the machine ca. 46.0 kg dimensions of the machine ca. 600 x 250 x 500 mm Furnishing: - various replacement rollers Lrjdoxabmcspfx Afzow - hand crank - front stop

Condition: new, Year of construction: 2025, STARWELD POBH is an advanced version of our high-performance mesh welding line, designed to produce high-quality wire mesh 3D fences, including Eurofence and “V”-shaped fence designs. This model is equipped with a bending unit that allows for precise shaping of wire mesh, making it an ideal choice for various fencing projects. Lodpfx Afsd Rlanjzorw Bending Unit: The integrated bending unit empowers STARWELD POBH to effortlessly shape wire mesh into Eurofence or “V”-shaped fence patterns with precision. This feature enables you to meet the demands of diverse fencing projects with ease. High-Quality Output: Expect nothing less than exceptional quality from STARWELD POBH. Whether you’re crafting aesthetically pleasing Eurofences or robust “V”-shaped fences, our model ensures each piece meets the highest industry standards. Tailored to Your Needs: Just like its predecessor, STARWELD POH, this model is customizable to your specific project and mesh type parameters. We can adapt the design to suit your unique requirements, ensuring optimal performance and results. STARWELD POBH is not only ideal for the construction industry but also finds its utility in crafting shelves, grids, cages, pallets, containers, and, of course, fencing. Its ability to create intricate 3D fence designs makes it a standout choice for projects that demand both functionality and aesthetics. Elevate your wire mesh production capabilities with STARWELD POBH, where innovation meets precision to redefine the art of fence manufacturing. Contact us today to discuss how STARWELD POBH can transform your fencing projects into works of excellence.

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 Lrodpfx Afewf Rgxjzow --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2022, plate thickness 4.0 mm throat 260 mm distance between roll centers 132 mm stroke 55.0 OW mm tool adaptor Ø 35 mm, 12 mm Nut mm total power requirement 3.0 kW weight of the machine ca. 450 kg. range L-W-H 1600 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - hydraulic adjustment of the upper roller, with pressure gauge - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment Lsdexaazljpfx Afzjrw - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: new, Year of construction: 2025, STARWELD GR is a high performance mesh welding plant for the production of electro-fused grating. A big product range can be achieved through its easy adjustments. Special designs can be adopted according to the customer needs (special technical specifications or special products). Products can be used for stairs, floorings, catwalks, platforms, fencing, etc. Features: Feeding from coil or pre-straightened and cut bearing bars Automatic or manual feeding of flat steel bearing bars Automatic feeding of round or twisted-square cross bars from coils or hopper Various bearing bar spacings: 22, 25, 30, 34 mm or different on demand Very effective grating flattening mechanisms Cross bar automatic edge trimming Fully automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Lredpfx Asd Rlapofzew Easy maintenance & use High reliability & long life

Condition: new, plate thickness 2.5 mm Lrsdpfxjxaaw Ho Afzjw throat 260 mm distance between roll centers 92.0 mm weight 295 kg range L-W-H 1200 x 700 x 1200 mm Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Shaft length 140 mm roll diameter 62.0 mm throat 100 mm roll speed 16.0 + 32.0 U/min engine output 0.75 kW weight 135 kg range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Features: Ljdpfx Aexaaf Rjfzerw - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame