Used Wig Welder for sale (540)

Condition: used, Year of construction: 1999, serial number 97665 Lredpfx Afjuxfzpezew welding power 280 kVA Baunorm EN: 60974-1 / EN Brenner / Schlauchpaket

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA Lrodpfxowf Rg Ss Afzjw --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Condition: new, current intensivity 200 A capacity at 100% load 150 A 230 V weight of the machine ca. 9,0 t dimensions of the machine ca. 0,46 x 0,15 x 0,32 m TIG welding system - New - 3m hose package - Additional 8m hose package - Ground cable - Gas connection hose Lodpfx Ajwrzrxjfzsrw - Documentation

Condition: used, current intensivity 400 A open-circuit voltage 65-75 V IP protection class IP21 Permissible load at 35% duty cycle 400 A Lrsdpfx Afjd Ih R Nozow at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC Lsdpjwf Rgrsfx Afzsrw --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. Lrodpfswf Rg Ejx Afzow In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg Lredpfxewf Rgxo Afzjw dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: good (used), Year of construction: 1985, ##### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE ##### Machine type: TIG welding machine Manufacturer: MESSER GRIESHEIM Model: Multiwig G 250-1 Year of manufacture: 1985 Condition: good Offer type: used machine Technical data: Type: TIG and electrode Connection: 400 Volt Power: 5-250 Ampere Note: with foot pedal, water cooling Drive: 32 Ampere Lsdpfxogtczns Afzjrw Weight: 150 kg The machine is in good and immediately operational condition and can be inspected and demonstrated at our premises at any time. We would be pleased if our offer meets your interest. Subject to errors, changes, and prior sale.

Condition: used, Year of construction: 2004, operating hours: 1,399 h, functionality: fully functional, machine/vehicle number: Fanuc Arc Mate 120i/B/20, load capacity: 20 kg, workpiece weight (max.): 500 kg, Equipment: documentation/manual, The robot is mounted on a linear axis with a span of 4 m. It has a dual positioner with a payload of 500 kg. Ledpfx Afsvb Evbozerw Please refer to the description for details of the system. The system has not been in use for several months and can be inspected at any time. The robot has been regularly serviced and is fully functional. The system has very few operating hours, as follow-up orders have not been received in the expected volume.

Condition: excellent (used), Ultrasonic welder, Ultrasonic plastic welder, used machine Manufacturer : Branson Lredpfx Afet H Nhuezsw Type :900 AES series actuator Overall dimensions : 1200 x 810 x 2410 mm Machine dimensions : 420 x 700 x 1470 mm Control dimensions : 450 x 450 x 180 mm Weight : 167 kg Frequency : 20 KHZ Power : 1000 W Maximum stroke length : 100 mm

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, laser wavelength: 1,075 nm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 2 mm, power: 8 kW (10.88 HP), input current: 21 A, input frequency: 5 Hz, type of input current: AC, overall weight: 55 kg, total length: 760 mm, total width: 325 mm, total height: 540 mm, warranty duration: 48 months, Equipment: cooling unit, Main technical specifications Ledpfowl Rm Sex Afzjrw Laser power: 1500W Operating mode: Continuous / Pulsed Laser wavelength: 1075 ±10 nm Power stability:

Year of construction: 2006, condition: ready for operation (used), A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible. Lodpfx Aeviv Dlefzerw

Condition: new, Year of construction: 2025, working width: 2,500 mm, wire diameter (max.): 12 mm, mesh size: 100 mm, 6-12mm Mesh length 6M Mesh width 2.5M 24 welding point Lodjxyqg Eopfx Afzorw Welding speed 40-70 times/min

Condition: good (used), I sell Dalex- Werke PMS11-3 spot welding machine, 172KVA, in bdb condition. Lrjdpfx Aeu Sb Dtefzow

Condition: new, Year of construction: 2018, Automatic angle welder Manufacturer: Diez Model: AWS4535 Year of manufacture: 2018 Lrjdjwriuuopfx Afzow No operating hours! Welding frame: 500 x 350 mm Belt width: 32 mm External dimensions: 170 x 130 x 135 cm

Condition: good (used), Strip length: 1250 x 650 mm Welding surface: 1000x700mm Lrodpfxei D Dz Hs Afzow

Condition: excellent (used), Band saw welder IDEAL model BAS020 Lredpfexw Iirsx Afzew

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 24 months, type of cooling: water, welding current at 60% duty cycle: 350 A, welding current at 100% duty cycle: 300 A, welding current (min.): 20 A, welding current (max.): 350 A, For sale: Kolarc XM350 20-350A 400 Volt +- 10% Water-cooled Pulse Double Pulse XRoot XDeep Position XStabil XCold Lredpfx Aoxyh Akofzew 406 Fixed programs Program memory 4 Roller drive New Including 4 Meter PRO5000 MIG/MAG Welding torch, 5 Meter 50mm² earth work lead, gas cable, and interconnection package. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2018, condition: good (used), Fully automatic L-sealer / Fully automatic side sealing machine Manufacturer: Diez Type: AWS-C 9070 CS Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Type: HTC 122-40D Year of manufacture: 2018 Lrjdpfxotzcd Se Afzow Operating side: Left in feed direction Passage width: approx. 600 mm Passage height: approx. 190 mm Seal length: approx. 900 mm Working height / belt height infeed/outfeed: approx. 860 mm +100 Power: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230V AC, 50Hz, 1 Ph + N + PE Power consumption: 3.5 KW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 251125ä

Condition: good (used), Format: 500x500mm Lrodjgt Un Sepfx Afzew

Condition: used, Band saw welder IDEAL model BAS040 Lodpfx Asxw Iifsfzsrw

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, type of cooling: water, welding current (min.): 2 A, welding current (max.): 500 A, High Efficiency Aluminium Welding Improvement of the welding quality due to a variety of functions Current regulation via a torch switch Improved welding of thin sheet through „Silent Pulse“-function High concentrated welding arc improves the welding of butt-joint and cold arc applications Excellent arc start characteristics by high frequency or lift-start Control panel protected against accidental impact Applicable Fields: Chemical Industry, Pressure vessels, Automotive, Motorcycles etc. Applicable Materials: Aluminum, Stainless steel, Mild steel, Titan, Magnesium, Copper etc. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. Lsdpfjxx Tzpsx Afzjrw All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), Format 500x500mm Ledpogt Unkofx Afzerw

Condition: excellent (used), Band saw welder IDEAL model BSO/25 Ledpfx Afsxw H Srszerw

Condition: excellent (used), Bandsaw welder IDEAL model BS1 Lrjdpfx Asxw H Sfofzow