Used Shark 260 for sale (2,647)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,446 h, clamping force: 2,600 kN, screw diameter: 60 mm, overall weight: 22,300 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,780 mm, Electrical injection moulding machine manufactured in 2015. This Engel e-victory 1640/260 features a clamping force of 2600 kN and an injection unit of 1640. It includes a tiebarless clamping system and a servo-electric injection system for high efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel e-victory 1640/260 machine we have for sale. Contact us for further details. • Max swept volume cm³ 792 • Screw speed max r/min 250 • Injection rate cm³/s 765 • Spec. Injection pressure bar 2330 • Injection unit: 1640 • Injection system: Servo-electric, high execution • L/D ratio: 24 • Clamping system: Tiebarless ENGEL clamping system • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Hydraulics: ECODRIVE SHV1 (1 demand-regulated servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz Bwjdjz Dgrpopfx Agxjw • Nominal connected load: approx. 164 kW • Centering: 160 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 8 on stationary platen with Venturi nozzles and pressure switches • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 16 control zones, max heating power 25 kW • Nozzle radius: 15 mm • Nozzle bore: 4 mm • Nozzle contact stroke: approx. 405 mm • Hydraulic tank capacity: Main tank approx. 490 l, suction tank approx. 220 l • Robot interface: Euromap 67 / AN-146 • Additional equipment • MuCell package: • Complete MuCell Basic Package • PM cold-work steel screw Ø 60 mm • Hydraulic needle shut-off nozzle • Melt pressure sensor • Trexel auxiliary equipment: SII VC 30, MIK 1060 SII • Frame for two 50 L gas cylinders • Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total) • Including GEKU robot

Condition: like new (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, total height: 3,300 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 28,000 kg, number of slots in tool magazine: 60, Equipment: chip conveyor, 5-axis machining centre DMG DMF 260-11 Year of manuf. 2012 Control Heidenhain iTNC 530 Speed [rpm] 10000 Movement X/Y/Z [mm] 2600/1100/900 Tool holder SK50 Spindle Speed 10.000 U/min Power 44 kW Torque 288 Nm Taper SK 50 Media feed-through Blast air, Coolant 4. NC-Axis Technologie NC-Swicel head Stroke +/- 100° Clamping Hydraulic 5.NC-Axis Technolgie NC-Round table Stroke 360° Diamenter 1.050 mm Clamping Hydraulic Load capaity 1.200 kg Tool magazin 60 stations Rapid travers 40 m/min Chip managment Chip conveyor Coolant mangament Coolant through spindle, 80 bar Positioning sensor Direct scale in all Axis Workpiece measurment Touch probe, Heidenhein TS 649 Oil mist seperator: Media feed-through spindle Blast air, Coolant Process observation Operation mode 4 Bedpfx Agezucm Hexeww

Condition: excellent (used), Year of construction: 2016, operating hours: 7,260 h, functionality: fully functional, Willibald EP5500 Shark waste shredder, manufactured in 2016. In perfect condition and ready for operation, with 7,260 operating hours. Bjdpezrv Husfx Agxeww

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: limited functionality, Equipment: lighting, This machine has served us well in our workshop for a long time. Unfortunately, the electronics appear to be defective. Bwodpsz Dgmmefx Agxsw Therefore, we had to purchase a new one. Available for self-collection in Krostitz.

Condition: used, Year of construction: 1990, functionality: fully functional, 260 mm Rund documentation vorhanden automatic feeds ja ja weight of the machine ca. 2,2 t Bodpez D Iu Sefx Agxjww dimensions of the machine ca. 1,7 x 2 x 2 m

Condition: used, Year of construction: 2019, functionality: fully functional, Flexographic printing machine Rotary Print 260 from 2019, Tech-Wash 8 UV colours Bwjdpfx Ajxrdb Hsgxow Manual colour registration Web guiding control One die-cutting station Web width: 250 mm Max. roll diameter on unwinder: 1000 mm Max. roll diameter on rewinder: 1000 mm Max. roll diameter (matrix) on rewinder: 500 mm Machine working speed up to 120 m/min depending on material type Units for web-turning, peel-off, lamination included Comes with 10 anilox rolls, 7 sets of printing cylinders, and 7 magnetic cylinders. Machine is 100% operational and in continuous use.

Year of construction: 2023, operating hours: 16 h, condition: like new (used), functionality: fully functional, GCV Glass Picasso V2 260 glass painting machine, year of manufacture 2023, condition - as new. Bwjdpszhagkofx Agxew AUTOMATIC PAINTING MACHINE GCV Picasso-V2 260 Max. Glass Width (mm): 2600mm Max. Glass Length (mm): unlimited Max. Glass Weight (kg): 600 kg Min. Glass Size * Width * Length (mm): W 220mm * D 900mm (single panel size) ADDITIONAL PRODUCTION EQUIPMENT 1 pc. transport table, equipped with wheels 1 pc. large stand for drying and storage portable sample boards with color palettes Mixer with pigment stand, Number of containers: 24, Container volume: 2.3 l

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 337, Kolbus DA 260 case-making machine - Device for applying inner lining with hot glue - Automatic case counter - Single case request for control purposes, initiated from the operating side - Infinitely variable drive - Safety standard compliant with CE directives and specifications Technical data: Size range of open case: min.: 205 x 140 mm max.: 670 x 390 mm Joint width: 4 – 15 mm Width between boards: 14 – 120 mm Turn-in width, closed: 8 – 15 mm Cloth: width: 223 – 708 mm height: 130 – 428 mm Boards: thickness: 1 – 4 mm width: 95 – 328 mm height: 140 – 390 mm Board center strip: thickness: 1 – 4 mm Bwedpfsz Hlywox Agxew width: 6 – 90 mm Center strip roll: thickness: 0.3 – 0.6 mm width: 6 – 90 mm Inner lining dimensions, dependent on glue processing: width: 195 – 670 mm height: 130 – 390 mm Do not hesitate to contact us for more information. The machine is still in production.

Condition: used, Year of construction: 2015, The machine is suitable for precise and efficient drilling and dowel insertion in furniture production. Bjdpez Incdefx Agxjww Technical specifications: Year of manufacture: 2015 Machine dimensions: 2.6 × 1.6 m 3 × vertical drills 3 × horizontal drills X, Y, and Z axes – NC controlled and computer-adjustable Barcode scanner Uses dowels with a diameter of 8 mm Machine is in good condition The machine is available for inspection by prior arrangement. For additional information, pricing, or to arrange an inspection, please contact me.

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 260 mm, control type: NC control, overall weight: 1,100 kg, Equipment: lighting, Band saw machine Manufacturer: Meba Type: Meba Profiline 260-AP Year of manufacture: 2004 Control system: Meba Serial number: XXXX Technical data: ----- - Cutting range 90° round: 260 mm - Cutting range 90° rectangular: 300 x 260 mm Bedpfxjz Hbgae Agxsww - Cutting speed: 15 - 150 m/min (AC drive) - Drive, saw band: 1.5 kW - Scrap length, automatic: 90 mm - Scrap length, manual: 10 mm - Cutting pressure: infinitely variable / electric - Saw frame guided twice via linear guides - Material feed via controlled feed clamp ..with hydraulic material full-stroke clamping - Saw band dimensions: 3,350 x 27 x 0.9 mm - Machine weight: approx. 1,100 kg Accessories: ----- - 5x saw band, new

Condition: used, Year of construction: 2000, functionality: fully functional, USED AUTOMATIC ROTARY SAW, SCORTEGAGNA RUSCH 260/320 AF, overhauled like new. READY IN STOCK Bsdpfxozhui Tj Agxeww

Condition: used, New: Yes Year of construction: 2025 Working width: 260 cm Bedpfj Af Un Iox Agxjww

Condition: good (used), Year of construction: 2013, Volvo FL, 260 hp, in good condition, 1,100,000 km, ATP certificate valid until 2028 (FNA), Carrier refrigeration unit. Bjdpfe Agydhsx Agxsww

Condition: like new (used), Year of construction: 2018, turning diameter over cross slide: 520 mm, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 110 mm, spindle speed (max.): 2,000 rpm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, bar passage: 110 mm, Equipment: documentation/manual, CNC LATHE COMEV PICODUE EVO 260×1500 – Year 2018 – Operational – Turin (TO) Flat-bed CNC lathe COMEV Picodue EVO, model 260×1500, year 2018 (serial number 8051), in good condition and fully operational. One-piece cast iron construction with induction-hardened and hand-scraped prismatic guideways. High-quality Italian manufacturing. Available for inspection and testing by appointment in Turin. Main technical specifications: • Max swing over bed: 520 mm • Max turning diameter: 260 mm • Max swing over carriage: 285 mm • Distance between centers: 1,500 mm • Spindle bore: Ø 110 mm • Spindle nose: Cam Lock 8" (A2-8") • Spindle speed: 0 – 2,000 rpm (stepless) • Motor power: 12.5 kW (16.8 kW peak) • Rapid traverse X / Z: 10 / 10 m/min Bsdpfxjy A Type Agxsww • Precision ground and preloaded ballscrews: ISO 5 – zero backlash • RAPID Original quick-change turret – 4 positions • CNC control: Z32 Delectron / COMEV • 15" color touchscreen display • ISO / conversational / teach-in programming • Connectivity: USB – network – remote diagnostics • 2 controlled axes: X – Z • CE compliant | Year: 2018 Machine available for inspection and testing by appointment.

Condition: excellent (used), Year of construction: 2019, Horizontal, semi-automatic bandsaw machine in a robust design, intended for professional use. The machine is equipped with a coolant system as standard; its design separates coarse dirt from the required coolant. The saw frame can be easily pivoted, allowing for bevel cuts on both sides, up to 60° to the right and up to 45° to the left. The pivoting saw frame is secured using a clamping lever. Semi-automatic operation: At the touch of a button, the complete cutting cycle is performed – tensioning the material, starting the saw blade and the cooling system, carrying out the cutting process, stopping the saw blade and the cooling system, returning the saw frame to the adjustable starting position, and opening the clamping device, resulting in comfortable and efficient operation. Operation in manual mode is also possible. The clamping pressure can be adjusted via the hydraulic unit. * The table rotates with the pivoting action, preventing cutting into the table. * Precise carbide guides for accurate cuts. * Display for saw blade tension. * Saw blade speed is frequency-controlled, ranging from 15-90 m/min. * Saw blade dimensions: 2880 x 27 x 0.9 mm Bsdpfjzwv Ntex Agxsww * Optional laser line and micro-spray system. The saw blade can be changed easily and quickly, which simplifies the use of the appropriate saw blade and also protects the machine and the saw blade.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Bodpfx Asfg E H Usgxoww Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: good (used), Year of construction: 1991, functionality: fully functional, power: 18.5 kW (25.15 HP), Single-shaft shredder / Waste wood shredder Manufacturer: KARA Energy Systems Type: KV 1508-260 Year of manufacture: 1991 - REV 2018 (General overhaul in 2018) CE marking Single-shaft shredder with a slow-running rotor for shredding waste wood, slats, panel remnants, and pallets. Typical applications: Carpentry, joinery, pallet manufacturing, wood processing, preparation of fuel for wood-fired furnaces. Hopper and rotor: Bwodpfoz Hif Dex Agxjw Hopper opening approx. 1500 x 800 mm Rotor width approx. 1500 mm Rotor diameter approx. 260 mm Drive: Drive power 18.5 kW Basic concept: - Single-shaft shredder for wood waste - Long feed hopper with hopper extension - Drive via electric motor and gearbox, mounted on the side - Discharge via pipe connection Expected availability from January 2027.

Condition: good (used), Year of construction: 1983, functionality: fully functional, Used, compact LUREM C 260 EN2 surface planer and thicknesser from 1983. The machine is suitable for surfacing and thicknessing solid wood. It features a planing width of approximately 260 mm, adjustable surfacing tables, and a swiveling fence. The thickness is adjusted mechanically via a handwheel. Robust and compact machine, well-suited for carpentry shops, workshops, and ambitious users. Technical data / Features Manufacturer: LUREM Type: C 260 EN2 Year of manufacture: 1983 Machine no.: C.J. 0.17 Working width / planing width: 259 mm Motor power: 2.2 kW Max. speed: 6,400 rpm Thickness planer feed height: 140 mm Power connection: 400 V / three-phase Jointer cutter block Surfacing and thicknessing function Adjustable surfacing tables Fence included Height adjustment of the thickness table via handwheel Bodszzah Ijpfx Agxoww Dust extraction connection available The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Transport is possible for an extra charge! Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information is without guarantee.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 06202305, functionality: fully functional, total length: 14,000 mm, working width: 360 mm, Schober Converting Machine - Die-cutting units - Reel to sheet - Fanfold - Magnetic stripes - Air shock web width 360 mm Bwedpfxjw Ec U Io Agxjw

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA Bwodpfez I T Rmsx Agxjw weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. Bwodpfxjzrmk Re Agxsw End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of hydraulic lifting of the saw frame.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: M60L/8583, Offer Number: M60L/8583 Machinetype: screw washing machine Make: MOC DANNER Type: Shark 100 Constr. year: 2014 capacity: 250 Kg Bsdswi Swyopfx Agxoww setting plane: output: Location: In our warehouse

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 260 mm, Equipment: CE marking, HESKA HES 260 metal band saw – robust band saw for metalworking For sale is a used HESKA HES 260 metal band saw. The machine is ideally suited for cutting steel, stainless steel, aluminum, and other metal profiles, tubes, and solid materials. The HESKA HES 260 is characterized by its solid construction, reliable technology, and versatile applications. Thanks to its horizontal design, it is ideal for workshops, blacksmith shops, metal fabrication companies, and general mechanical engineering. Technical data: Manufacturer: HESKA Model: HES 260 Machine number: 23244 11 Bwodpfx Agjzwlhfsxew Machine type: Horizontal metal band saw Cutting range round/square at 90°: 260 mm, at 45° 160 mm Miter: right/left Band speed: 15-90 m/min Saw band: approx. 3,660 × 27 × 0.9 mm Coolant system: available Drive: approx. 0.6/0.8 kW Operating voltage: 400 V Dimensions: approx. 2000 x 1000 x 1200 mm (L x W x H) Weight: approx. 650 kg

Condition: like new (used), Year of construction: 2024, Binder CB 260 Incubator with O2 control The incubator is unused and originally packaged. Model CB 260 | CO2 Incubators with Thermal Sterilization and Sterilizable CO2 Sensor Advantages • Safety thanks to maximum protection against contamination of cell cultures • Reliability due to consistent comfort conditions for cells • User-friendly thanks to easy routine cleaning and convenient operation • Cost-effective operation without consumables Bwsdpfx Agjxaungoxsw PRODUCT DESCRIPTION The high-performance and versatile CB CO₂ incubator is suitable for cell testing in substance research and medical studies. With a wide range of options and accessories, the BINDER incubator easily fulfils complex cultivation tasks or individually specified growth conditions at low oxygen concentration. KEY FEATURES • Optimized dual-chamber humidification system with anti-condensation protection • Proven anti-contamination concept with 180°C thermal sterilization • Hot air sterilized CO₂ sensor with single-source infrared technology • Seamless inner chamber made of stainless steel with stainless steel bead slide-in supports • Fanless interior with Venturi CO₂ gas mixing nozzle • Intuitively operated touch controller • Internal measurement data recording system, data export via USB interface in a common format • Fault diagnostics system with visual and audible alarm Connections: Ethernet, USB, volt-free alarm contact CO₂ Fail Safe System for pH safety of cell cultures

Condition: as good as new (ex-display), Year of construction: 2024, type of input current: DC, cutting height (max.): 285 mm, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, saw band length: 2,950 mm, saw band width: 27 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description Bwedpfx Aozzkthjgxew MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg