Used Shark 260 for sale (5,352)

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm Lsdjfg E H Eopfx Aabsah capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: used, mileage: 2,59,554 km, power: 330 kW (448.67 HP), first registration: 12/2011, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro5, Year of construction: 2011, overall weight: 18,000 kg, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, navigation system, parking heater, M-Benz Actros Giga Space 1845 LS 4x2 Tractor Unit FIN: 1L618330 --!!!!! Vehicle goes into limp mode, limited drivability. Repair required. !!!!!-- Chassis / Attachments: * Wheelbase 3,700 mm * Full / Air Suspension * Tyres: Front 385/55 R22.5 / Rear 315/70 R22.5 * Alcoa Aluminium Rims * Condition: Front approx. 60/70%, Rear approx. 80% * 2 x Aluminium Tanks * 1 x AdBlue Tank Cab Equipment: * Giga Space Cabin * 2,500 mm width, flat floor * 3 Seats * Driving School Vehicle * 3 Pedals * 2 Bunks * Leather Steering Wheel * Auxiliary Heater * Automatic Climate Control Lasdpoxir U Aefx Aaboh * Cruise Control * Radio // CB Radio * Bluetooth * 2 x Air Horns * Navigation System * Adaptive Cruise Control * Lane Keeping Assist Engine / Transmission: * 330 kW // 450 HP // 12,809 cc // Euro 5 EEV * PowerShift 3 // Automatic Transmission * Retarder * Differential Lock Weights: * Gross Weight 18,000 kg * Payload 9,483 kg * Unladen Weight 8,517 kg Other: * 1 Previous Owner * Tractor Unit Certified for Driving School Use New general inspections / safety inspections or adjustments to weight (derating/uprating) possible on request. We are happy to assist you in obtaining export/transfer number plates or organising delivery of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for typographical or printing errors, subject to changes, interim sale, and mistakes!---- Who are we? Leible Nutzfahrzeuge is a family-run business located in Kehl am Rhein. With many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 m², we offer a wide variety of vehicles. Our company philosophy is characterised by fairness and integrity. As customer satisfaction is very important to us, we offer a comprehensive all-round service package and provide a knowledgeable contact person to assist with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle Loading We are happy to assist you with loading your purchased vehicles. Organisation of Special Transports We are happy to help you organise special transports. Temporary/Export Number Plates We are happy to help you obtain export/temporary number plates. Handling of Customs Formalities We are happy to assist you in handling customs procedures.

Condition: used, Year of construction: 2002, cutting diameter 260 mm dimensions of saw-band 4115 x 41 x 1,3 mm cutting range square 260 x 260 mm weight of the machine ca. 2,2 t Remaining piece length: 80 mm Smallest diameter that can be sawn: Ø 8 mm Smallest cut length: 8 mm Minimum remaining piece length, single cut: 30 mm Minimum residual piece length, automatic mode: 80 mm Maximum automatic material feed: 600 mm (modified for repeat accuracy of +/- 0.2 mm) Belt speed: infinitely variable 15–125 m/min Cutting feed: infinitely variable Material clamping: hydraulic, clamping pressure adjustable Equipment: Ledpfx Aasxa Hk Tjbsah Vibrating table Belt tension monitoring Roller conveyor 3500 mm(roller drive via hand wheel) with guide rollers roll width approx. 320 mm Chip conveyor Subject to errors in the technical data Translated with (free version)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale is a Jumag steam generator with oil burner. Gas burner available on request. Type DG 260. Steam output 260 kg/h. Max. steam pressure 13 bar. Delivery available at extra cost. If you have any questions, feel free to contact us. Ledpfx Ajw Hqyzjaboah

Condition: excellent (used), Stock number: 2896 Manufacturer: Heraeus Year of manufacture: Machine number: 7406922 Type / Model: MR 260 Interior width x height:: 260 x 160 mm Interior depth: 500 mm Temperature: up to 1000 °C Connection: Accessories/equipment: Lajdpjurf H Refx Aabsh Condition: very good Weight: 0.15 t Dimensions: 1,100 x 700 x 1,600 mm

Condition: good (used), Year of construction: 2003, Used fully automatic band saw from Danobat Ledpfx Ajwc Niyoaboah Type: CR 260 AF Round capacity: 260 mm Automatic chip conveyor Year of manufacture: 2003

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm table height mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 440 kg dimensions of the machine ca. m Ljdsfg E H Nopfx Aabeah Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: used, Year of construction: 2012, pressure 260 t distance between columns 360/270 mm stroke 60 mm Stroke rate 50 / min Distance table/ram, max. stroke up, adjustment up 225 mm Table surface area 340 x 380 mm table height over floor 800 mm Ram surface 230 x 220 mm Ram adjustment 12 mm Power capacity 4,5 kW Dimensions (WxDxH) 2,0 x 1,55 x 2,6 m Weight 4,5 t Overhauled in 2012 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) overhaul in 2012: new clutch-brake combination new control Siemens S 7 new two-hand and foot operation Lajdpfsvuuk Ijx Aabeh

Condition: good (used), functionality: fully functional, Year of construction: 2017, power: 120 kW (163.15 HP), load capacity: 200 kg, mast type: telescopic, lifting height: 23,800 mm, lifting power: 200 kg/m, platform length: 1,390 mm, platform width: 690 mm, overall weight: 3,500 kg, empty load weight: 3,300 kg, transport length: 6,680 mm, transport width: 2,100 mm, transport height: 2,950 mm, construction height: 25,800 mm, fuel type: diesel, fuel consumption per hour: 8 l/h, fuel tank capacity: 80 l, tire size: 215/75 R17.5, tire condition: 80 %, wheelbase: 3,700 mm, ground clearance: 230 mm, color: white, Equipment: ABS, UVV, soot filter, tilting carriage, === MAIN SPECIFICATIONS === Year of manufacture: 2017 Operating hours: – (chassis mileage 71,063 km) Maximum working height: 25.8 m Maximum horizontal outreach: 13.5 m (rear) Platform capacity: 200 kg Truck type: Mercedes-Benz Number of axles: 2 Drive type: 4x2 Transmission: Manual Cab type: Single Engine power: approx. 120 kW (163 HP) Fuel type: Diesel Platform dimensions (L x W): 1,390 x 690 mm Platform rotation: Yes (2 × 90°) Boom type: Telescopic (4-section) Stabilisers: Yes (4 hydraulically extendable) CE certified: Yes Total vehicle weight: approx. 3,500 kg (3.5t class) Price (EXW): €72,500 (excl. VAT) === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Chassis mileage: 71,063 km. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price: €72,500 (EXW / excl. VAT) The Palfinger P 260 B is the “alpha performer” among truck-mounted platforms in the 3.5-ton class – offering a perfect balance of height, reach, and stability. With a working height of 25.8 meters, a reach of up to 13.5 meters, and a compact transport length of only 6.68 meters, it delivers maximum performance in confined spaces. Lodpfx Aasxg Dcgobjah Its 4-section aluminum telescopic boom and 200 kg basket capacity ensure efficient and safe work at height. Ideal for maintenance, installation, cleaning, and rental applications. All machines are CE-certified, fully inspected, and ready for immediate operation. === DELIVERY === Crane loading available upon request for smooth handling during dispatch. Flexible delivery options tailored to your destination and logistics preferences. All transport is professionally handled by the Collé Rental & Sales logistics team.

Condition: used, mileage: 69,842 km, power: 77 kW (104.69 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,600 kg, first registration: 05/2017, loading space length: 2,411 mm, emission class: euro6, color: white, number of seats: 3, total width: 2,032 mm, total height: 1,964 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 0499. GW22HM28441 ---- SPECIAL EQUIPMENT -- Audio system - Seats: Seat package 4 - Partition (with loading flap), without window (custom truck basis) - Driver's seat, 4-way adjustable (forward/backward, backrest, inclination, height) - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests, height adjustable - Armrest inside for driver - BASIC seat cover: fabric - Partition (with loading flap), without window Standard equipment - 6-speed gearbox - Electronic ABS with EBD - Driver's side airbag - Outside mirrors, manually adjustable (2) - On-board computer - Flat roof - Double-wing rear door/180° (without window) - Tachometer - Electronic safety and stability. - No vinyl floor covering - Electric front windows - Ford Easy Fuel - Generator, 220 A - Halogen headlights with daytime running lights - Glove compartment with lid - Interior lighting with delay switch. Lasdpfeq Hrq Nox Aabeh - Paintwork: plain paint - Cargo area lighting - Adjustable steering column - Emergency brake support including emergency brake - Particle filter: diesel particle filter - Sliding door: sliding door, right - Side protection strips - Power steering - Seat belts - Socket: 12-volt connection - Lashing eyes 8 - Immobilizer - Heat-insulating glazing, slightly tinted - Central locking with remote control - Auxiliary heater, electric ... and much more ---- The vehicle is unprocessed! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any questions? We'll be happy to advise you!

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: Laodpfexab S Ejx Aabsh - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the cutting start position - Manually operated band tension control with display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm table height mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions m Ljdpfefg E Hyex Aabjah SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, cutting diameter 280 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 330 mm Lajdpjfg E H Defx Aabeh Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,24 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Attention: special price!!! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Lsdpfofm T Hbox Aabeah Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t dimensions of the machine ca. m MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Ljdpfx Aofg E H Isaboah Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. Ljdpfx Ajfg E Hzoabeah + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW Laodpfsfg E Iaex Aaboh weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm Lasdpfefg E Ibox Aabsh engine output 1,5 / 1,8 kW weight 670 kg Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Lsdpfxefg E H Rj Aaboah Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: used, Year of construction: 1993, cutting diameter 260 mm cutting width 400 mm Ljdpfxev T Nrks Aabjah capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm band speed 17 - 110 m/min engine output 3,5 kW dimensions of saw-band 3830 x 25 x 0,9 mm weight of the machine ca. 1,3 t dimensions of the machine ca. 2,1 x 2,0 x 1,6 m High-performance fully automatic band saw with - coolant system - documentation

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Ledpfx Aofg E H Uoaboah Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 300 mm Lajdpfxofg E H Ts Aaboh saw band length 3320 x 27 x 0,9 mm table height mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW Lodefg E H Sepfx Aabjah weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: used, Year of construction: 2002, cutting diameter 210 mm capacity 90 degrees: flat 270 x 200 mm Ljdpfx Aaewkvqtsbeah capacity 90 degrees: square 200 mm capacity 45 degrees: round 180 mm capacity 45 degrees: flat 180 x 190 mm capacity 45 degrees: square 180 mm vice 200 mm turning speed range: 36/72 m/min dimensions of saw-band 2750 x 27 x 0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,95 x 1,7 x 1,9 mm Bandsaw machine with: - Miter 45 ° right - Miter on turntable adjustable - Coolant system

Condition: used, Year of construction: 2007, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 320 kg Dimensions (LxWxH) 1,5 x 0,9 x 1,4 0 Ljdpfx Asxfwbyoaboah