Used Shrink for sale (499)

Condition: used, Year of construction: 2008,   Machine Overview The ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation. Operating mode: Automatic Infeed layout: Straight infeed (inline) Packaging: Tray wrap with neutral film overwrap Format range: 0.5 L – 10 L Iijdpfjxdnbzex Aabjh Machine configuration: Delivered without container infeed system (to be provided by the line) Year of manufacture: 2008; Overhauled: 2022 Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing. Key Technical Data Model: COMBIGIOTTO 90-M Brand: ATLANTA Operating condition: Ready for operation Package configuration: Wrap + film on tray Film type: Neutral Tray: Available (tray packaging configuration) Machine feed type: Straight (inline) Format capability: 0.5 L to 10 L containers Year: 2008 (overhauled 2022) Automation & Control Industrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability). Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application. Integrated diagnostics, alarm history and counters (shift/lot totals). Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status. Electrical protection degree: IP54 for the electrical system and motors. Line Integration Container infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator). Inline design simplifies alignment with fillers, labellers and downstream conveying. Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration. Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering). Condition & Maintenance Overall status: Ready for operation. Overhaul completed in 2022 to restore full functionality.

Condition: used, Year of construction: 2014, Ulma packaging line Iedjxnkg Iopfx Aabeih

Year of construction: 2002, condition: like new (used), Stainless Steel Shrink Wrapping Tunnel Wrapping Tunnel for packing products with strech foil, Producer: Schur Machine Model: E 340 Year of production: 2002 Complete Stainless Steel Iedpfx Ajhqfnleabjih Tunnel Opening dimensions 750 x 400 mm. That is not used long time, like new one!

Condition: good (used), Internal item no.: 25066 24 pcs. shrink fit chucks HSK-A63 Manufacturer: e.g. Haimer / SECO 3x D4 3x D6 Ijdpfx Aajxdlpcjbeih 3x D8 3x D10 3x D12 3x D14 3x D16 3x D20

Year of construction: 2023, condition: as good as new (ex-display), THE EXTRA LARGE SHRINK WRAPPER In addition to small packaging machines for packaging small and medium-sized products, Italdibipack also offers EXTRA-LARGE “One-Step®” systems, with the Dibipack BIG, one of the largest models of the Dibipack Evolution line, designed and constructed to cover the Meet requirements. It is a convincing answer to the increasing demand for a large machine with large capacity and high performance. Ideal to pack large size and large surface products such as frames, pictures and panels. TECHNICAL SPECIFICATIONS TECHNICAL DATA DIBIPACK 6084 EVX Voltage supply: 400 V - 3 Ph + N Maximum required power: 7 KW Overall dimensions of the machine L x W: 1940 x 950 mm Worktop height (on stand): 920 mm Machine weight: 190 kg Sealing area W x L: 580 x 840 mm Maximum product height: 250 mm on request Impulse sealing system: bottom knife Maximum roll dimensions DIA x B: 250 x 800 mm Output: 4 - 6 pieces / min Notes: We reserve the right to make technical changes. The performance depends on the operator and the type of packaging MORE INFORMATION MORE INFORMATION These "giants" have the same specifications as the shrink wrapping machines of the Dibipack Evolution line, but with some peculiarities: for example, two holding magnets that keep the hood closed during the work cycle and two fans that ensure better circulation of heat air during shrinking. The machine works with heat seal and shrink films such as PVC (BLUE FILM) or polyolefin films (GREEN FILM – GOLDEN FILM). Iiodpfx Aemv Emueabjh Machine manufactured according to CE guidelines.

Condition: excellent (used), • Original Bilz ThermoGrip holders – Made in Germany • SK40 taper, type T0600/AD40 and T0800/AD40 • Balancing G6.3 / 15,000 rpm – suitable for high-speed operations • Set includes solid carbide VHM end mills of various diameters • Ideal for precision machining and applications requiring high stability • Very good condition, ready for operation Top-tier equipment – robust construction, German quality, secure clamping. Iijdjxau Erjpfx Aaboh

Condition: used, Year of construction: 2008, Machine Overview Automatic tray plus film packer ATLANTA COMBIGIOTTO 90-M designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product with neutral shrink film, then conveys it through a shrink tunnel to obtain stable, retail-ready bundles. Ideal for beverage lines handling PET, glass or HDPE bottles. Reference No. FA56. Year 2008, overhauled in 2022. Condition: Ready for operation. Indicative output up to 25 packs/min, depending on product and format. Operating concept: automatic grouping of bottles, tray forming/loading, film wrapping and shrink-tunnel consolidation. Packaging configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy connection to existing conveyors. Key Technical Data Make / Model: ATLANTA COMBIGIOTTO 90-M Operating type: Automatic Infeed orientation: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal capacity: up to 25 bundles/min (format and product dependent) Year: 2008 (overhauled 2022) Condition: Ready for operation PLC: SIEMENS S7 E 300 Isdoxdictepfx Aaboih Automation & Control Industrial PLC-based control with operator HMI for recipe selection, speed setpoints and diagnostics. Inverter-controlled drives for smooth acceleration and product handling. Photoelectric sensors for product presence, jam and film detection. Temperature-controlled shrink tunnel for consistent film performance. Interlocked access doors with safety monitoring for guarded zones. Line Integration Upstream: accepts bottles from conveyor with 90° transfer to the infeed section; integrated selection/divider to create pack patterns before tray loading. Downstream: discharge conveyor after shrink tunnel for connection to inspection, case handling or palletizing. Signals and handshakes typically include start/stop, fault, emergency stop circuit integration and speed reference. Mechanical interface and layout drawings available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine presented as ready for operation. Preventive maintenance recommended: periodic checks of film path, knife/sealing components, tray magazine/erector, lubrications and conveyor wear parts. Performance & Versatility Suitable for a wide range of cylindrical or square bottles commonly used in beverages. Typical pack patterns achievable for bottles (e.g., 2×2, 3×2, 4×3, etc.) depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray provides rigidity and stacking strength. Consistent bundle quality via controlled film wrapping and thermal shrink process.

Condition: good (used), Passage width: 370x230mm Iedsukd Dlepfx Aabjih Belt length: 1200 mm

Condition: good (used), Professional automatic packaging system from a renowned European manufacturer, consisting of two components, each with separate controls. The machines can be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household and toys, as well as textiles. Automatic L-sealer Smipack FP 560 A: - Automatic movement of the sealing frame - Automatic waste film winding - Automatic product discharge via the outfeed conveyor - Process start manually by hand button or foot switch. Alternatively, automatic process start possible by entering a time interval on the display. - Conveyor belt height continuously adjustable via hand crank - Sealing frame approximately 580 x 420 mm - Sealing frame movement driven by electric motor - Water-cooled sealing unit (closed system) - Maximum film roll diameter 300 mm - Maximum film width approx. 600 mm - Perforation possible via 2 adjustable needle rings - Roll holder separately adjustable - Product insertion separately adjustable - The machine can be moved or fixed in place using lockable castors Shrink tunnel Smipack T 450: - Tunnel opening approx. 450 x 250 mm - Temperature adjustable from 85 to 200 °C - Conveyor speed adjustable from 2.8 to 9.4 m/min - Via 4 deflection units in the tunnel, the hot air flows can be set separately for top and bottom - The machine can be moved or fixed in place using lockable castors Overall system dimensions including roller conveyor approx.: Iedpfx Aaow D Rugjbjih Length 3.4 m x width 0.9 m Multilingual documentation on CD, including operating instructions, spare parts lists, and wiring diagrams, is included in the scope of delivery. The system has been used very little and can be demonstrated under power.

Condition: repair required (used), Device used for applying handles to PET bottle packs. Manufacturer: TWIN PACK Isdpfx Aewav D Esabeih Model: MDEL Year of manufacture: 1992 Weight: 400 kg Technical condition: used, incomplete Machine for renovation or for parts. Full technical documentation of the machine.

Year of construction: 2023, condition: as good as new (ex-display), DIBIPACK EVOLUTION: THE CUTTING EDGE TECHNOLOGY INHEAT-SHRINKING. Only one operator. Great performances for remarkable outputs. Advanced control and management of cycle. DATA SHEET SPECIFICATIONS – DIBIPACK 4255 SA EV Sealing area: mm 420×550 Sealing system: bottom blade Hold down magnet: standard Programs: 8 Iisdpjmv Ebujfx Aaboh Unit counter: standard Power supply: 400 V – 3 Ph + N Maximum power required: kW 6 Power consumption: kW/h 2,9 Overall machine dimensions: mm 2060×700 Working plate height (on stand): mm 920 MORE INFORMATION: Fully electronically controlled (second generation board) Automatic adjustment of sealing time according to production speed Stand-by function (energy saving) Unit-counter Gas spring for hood lift The hold down solenoid keeps the hood closed until the end of the shrinking cycle Stainless steel take out conveyor belt – automatic control Take out belt adjustable in hight Active carbon filter aspirator with activated carbon (standard) Including 1 roll of foil And U.V.V testing

Condition: excellent (used), Year of construction: 2007, WITH SHRINK TUNNEL & VIDEOJET Speed: max. up to 10,000 cycles/hour Formats (mm): min. 105 x 148 // max. 250 x 340 Thickness: min. 2 mm, max. 25 mm Counter: 26 million Equipment / Additional information: Processing with film -PE-, PP-, OPP- and PVC-film -Foil thickness min.: 20 my -Film thickness max.: 50 my -Film overlap min.: 30 mm Machine consists of: 1x Autoloader Iiedpev D If Dsfx Aaboh 1x Sliding feeder (for thicker products) 6x Rotary suction feeder 1x Cavalo feeder (landscape format) 1x Welding device (lengthwise & crosswise welding) 1x Videojet addresser 1x Shrink tunnel

Condition: used, Year of construction: 2013, Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour The Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour is a machine designed for shrink film packaging, ensuring high performance and reliability. Consequently, this model, manufactured in 2013, operates at a speed of 1650 bundles per hour, making it suitable for high-efficiency production environments. Technical Features of the Used Shrink Wrapper ITAL PAL FNC70+ PC300T1 1650 Bundles/Hour First of all, the machine features a straight entry configuration, allowing a linear handling of containers before film wrapping. Additionally, it works with neutral film, but it also supports printed films, enabling packaging customization according to production requirements. Moreover, the system includes a tray, which is essential for product stability during the packaging process. It processes formats ranging from 3 to 24 pieces per carton, with an adjustable configuration based on container volume. Similarly, the machine operates with American boxes, a widely used packaging type in the industry to ensure product protection and durability. Electrical Specifications and Energy Consumption Ijdpfxev Ew Rls Aabsih Furthermore, the system operates with a voltage of 380V, a power consumption of 10 kW, and a frequency of 50 Hz, meeting industrial standards for this type of machinery. Given these specifications, the shrink wrapper dimensions are 3400 mm in length and 2400 mm in depth, making it compatible with many existing production lines. Container Compatibility In particular, the Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  processes various types of containers, primarily focusing on glass bottles and cans, offering operational flexibility for different industrial sectors, including the beverage and food industries. As a result, manufacturers benefit from a machine that efficiently handles diverse packaging needs. Operational Status and Maintenance Notably, the machine is currently in production, ensuring full operational functionality and proper performance of all its components. Additionally, both technical manuals and safety protections are available, complying with industrial safety regulations. In addition to these features, the shrink wrapper has undergone periodic revisions, maintaining consistent performance and minimizing the risk of machine downtime. Furthermore, spare parts are available, facilitating routine and extraordinary maintenance without affecting productivity. Conclusion of this Used Shrink Wrapper ITAL PAL To sum up, the used ITAL PAL FCN70 + PK300T1 shrink wrapper is an optimal solution for those seeking a reliable machine with high production capacity. Consequently, its versatile configuration, compatibility with different packaging formats, and guaranteed maintenance make it ideal for automated packaging lines. Given its efficiency, the 1650 bundles per hour speed, combined with compatibility with neutral and printed films, makes it a strategic choice for optimizing industrial packaging processes. Therefore, this machine is an excellent investment for businesses aiming to enhance their packaging efficiency.

Condition: used, Year of construction: 2004, Sealing bar length 2500 mm Maximum width of upper reel 2400 mm Maximum width of lower reel 1450 mm Width of conveyor belt 1300 mm Length of entry belt 4800 mm Maximum useful height 800 mm belt speed 5-25 m/min with inverter heat shrink tunnel kw 50 Iijdpswh A Hcsfx Aabeh

Condition: as good as new (ex-display), functionality: fully functional, MAILBAG automatic, vertical packaging machine for sale. Ideal for magazines, newsletters, catalogs and publications. Digital control panel Automatic booklet length adjustment with photocell Electronic cutter temperature control Integrated product counter Power supply V 220/230 Iiedpjw Dpn Sjfx Aaboh You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Ask for a price including transport (location the Netherlands). Regards, Henk Hoos.

Condition: good (used), Format 500x500mm Iisdpfxsgt Unke Aabsh

Year of construction: 2008, condition: excellent (used), Technical Data Product number St 98-800 Heating medium Isdpfxsxaqg Es Aaboih Electric heaters Belt width: 850 mm Machine dimensions: 2200 x 1100 x 1900 mm Power: 82 kW Power supply: Electric, 400V 50Hz 5N Weight: 470 kg The machine is in perfect condition without any defects. The device showers the product with hot water from above and below. The machine has undergone a complete overhaul.

Year of construction: 2018, condition: repair required (used), machine/vehicle number: 2018-21175, REF: MM6220 1 X Tong Engineering SOAK TANK Iedpfx Asxd Srqoabeih NOTE: Needs refurbishment Technical specification ⚙️ ✅ Manufacturer - Tong Engineering LTD ✅ Machine type - Shrink Tank ✅ Serial number - 2018-21175 ✅ Year of manufacture - 2018

Condition: used, Year of construction: 2003, Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour shrink-wraps products efficiently. Consequently, its fully automated structure and production capacity of 1200 bundles per hour ensure high performance. Technical and Functional Specifications The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour operates with a continuous motion system, thereby maintaining a steady production flow without interruptions. Moreover, the wrapping process applies shrink film, effectively packaging bottles, cartons, and other containers. In addition, the system supports high-speed production lines, thus minimizing downtime and optimizing operational efficiency. Furthermore, the machine incorporates a straight inline feed system, which allows it to adapt to different conveyor speeds while integrating seamlessly with other machinery in the bottling line. As a result, this configuration simplifies integration into existing plants without requiring complex structural modifications. Shrink Film Characteristics In particular, the Used Shrink Wrapper Tetra Pak  applies standard shrink film, thereby eliminating the need for printed film support. As a consequence, this design increases flexibility in packaging material selection and significantly reduces operating costs. Therefore, the machine remains suitable for diverse industrial applications. Bundling Capability Iiedpfxsv Ew Iwj Aabsh Notably, the bundling system of the Used Shrink Wrapper Tetra Pak creates packs with or without trays, depending on the chosen configuration. Additionally, the machine accommodates various container formats, including bottles, bricks, and cartons, thereby providing high flexibility in production management. Since it runs at 20 bundles per minute, the system efficiently delivers 1200 bundles per hour, making it an excellent choice for high-production plants aiming to optimize workflow. Consequently, businesses can enhance their operational throughput significantly. Shrink Tunnel The Used Shrink Wrapper Tetra Pak includes a high-efficiency shrink tunnel, which ensures uniform sealing and tightening of the film around the bundle. Additionally, the system regulates temperature control, thereby guaranteeing optimal shrinkage without damaging packaged products. As a result, this feature preserves packaging quality and minimizes production waste effectively. Operating Conditions and Safety of the Used Shrink Wrapper Tetra Pak At present, the Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour remains in storage condition, thus making it ready for reinstallation and operation. Furthermore, the system incorporates safety devices that protect operators during use, thereby minimizing accident risks and ensuring compliance with industrial regulations. Manufactured in 2003, the Used Shrink Wrapper Tetra Pak continues to provide an efficient, robust, and easily integrable packaging system. Moreover, its modular structure and compatibility with various packaging materials make it a versatile solution for multiple sectors in the food and beverage industry. Ultimately, this machine enables companies to optimize their packaging operations while maintaining high standards of safety and efficiency

Condition: new, Year of construction: 2025, L-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-L (high speed ). The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 35 cycles/minute; packing sizes: (L + H) = 600mm provided that H < 180mm and (W + H) = 500mm provided that H < 180mm; length of sealing blades: horizontal = 703mm, vertical = 550mm; power: 220V/3.2kW; machine dimensions: L2015xW1470xH1300mm; weight: 850kg. Iiedpfx Aajv Nl Awjbeh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), Format: 500x500mm Isdpfxsgt Uple Aabsih

Condition: used, Year of construction: 2007, Used Shrink Wrapper DIMAC STAR ONE up to 1800 boxes/h Introduction to Efficiency and Precision In the bottling machinery landscape, efficiency and precision are key. Consequently, the Used Shrink Wrapper DIMAC STAR ONE emerges as an optimal solution. Specifically, this model, the STAR ONE P 30 from 2007, shines due to its capacity. It handles up to 1800 boxes per hour. Thus, it ensures a steady and reliable workflow. Design and Adaptability of the Shrink Wrapper DIMAC STAR ONE Designed for various container types, including glass and PET, this machine meets broad industry needs. Its straight feeding system guarantees smooth, orderly product transport. Therefore, it minimizes the risk of damage or unexpected stops. Speed and Flexibility The STAR ONE P 30 model operates at 30 bundles per minute. This balances production speed with attention to detail effectively. The machine uses neutral film for wrapping. Additionally, there’s an option to add a tray, offering significant packaging flexibility. Safety and Operability of the Shrink Wrapper DIMAC STAR ONE Isdpfx Aasvgt Sbsbeih Operational safety is another critical aspect. The Used Shrink Wrapper DIMAC STAR ONE includes several safety features. These features protect operators and ensure a safe working environment. Instruction manuals are available, simplifying machinery management. Hence, maintenance and routine operations proceed smoothly. Technical Specifications and Environmental Considerations Technically, the machine operates at 3×400 V, with a power of 47 kW and a frequency of 50 Hz. This proves it as an energy-efficient option. Currently stored in a warehouse, the Used Shrink Wrapper DIMAC STAR ONE is ready for production line reintegration. It promises reliable, long-lasting performance. Conclusion: A Wise Investment for Operational Efficiency In conclusion, choosing a Used Shrink Wrapper DIMAC STAR ONE for shrink wrapping operations is wise. It represents a wise investment for operational efficiency. The combination of speed, flexibility, and safety makes this model valuable. It meets the most demanding production needs.

Condition: used, Year of construction: 1999, Used Shrink Wrapper OCME VEGA S 60-2-F 48000 bph The used shrink wrapper OCME VEGA S 60-2-F is a high-performance and reliable packaging solution, ideal for wrapping bottles, cans, or other containers using shrink film. Designed for high-speed production lines, this machine can achieve an impressive output of up to 48,000 bottles per hour (BPH), making it suitable for large-scale production needs while ensuring accuracy and efficiency. Main Features Model: OCME VEGA S 60-2-F Maximum speed: Up to 48,000 bottles per hour Configuration: Operates on 2 tracks to optimize production capacity Supported formats: Various bundle configurations such as 3×2, 4×3, and 6×4, compatible with PET bottles, glass bottles, or cans Packaging material: Shrink film, with or without tray support The OCME VEGA S 60-2-F is engineered to support different formats, enabling flexibility in meeting various packaging requirements. With its dual-track setup, the machine maximizes production efficiency, ensuring consistent throughput even during intensive operation. Benefits of the OCME VEGA S 60-2-F High productivity: Thanks to its dual-track design, the machine is tailored to meet the needs of high-demand production environments, such as large beverage or food processing plants. Format versatility: It seamlessly handles multiple packaging configurations, whether you need multipacks for retail or bulk distribution. Energy efficiency: Designed with optimized thermal systems to reduce energy consumption while maintaining fast and reliable shrink wrapping. Robust and reliable: Built with industrial-grade components, the machine ensures long-lasting operation, even in challenging production settings. Easy maintenance: Features accessible components for fast, routine maintenance and minimal downtime, enhancing productivity on the production floor. Applications The OCME VEGA S 60-2-F is versatile and ideal for various applications, including: Iiedevgu Dxjpfx Aabsh PET or glass bottles: Suitable for packaging water, soft drinks, beer, and oils. Cans: Designed to handle beverage cans for soft drinks, beer, or food products. Other containers: Handles a wide range of plastic, glass, or composite containers, making it suitable for both food and non-food industries. The ability to switch between different formats and configurations ensures that the machine is ready to adapt to changing production demands. Whether you are packing small retail units or larger multipacks, this machine guarantees flexible operation without sacrificing efficiency. Why Choose a Used OCME VEGA S 60-2-F? Opting for a used shrink wrapper like the OCME VEGA S 60-2-F offers businesses the opportunity to acquire premium packaging equipment at a fraction of the cost of a new machine. Each unit undergoes rigorous inspection, testing, and servicing to ensure full functionality and operational readiness before delivery.

Condition: used, Year of construction: 2001, Used Shrink Wrapper SMI SK 450T – 45 ppm – tray If you’re in the market for a top-tier shrink wrapping solution, look no further than the SMI SK 450T. This machine, crafted by the renowned brand SMI in 2001, represents a pinnacle of engineering and design, catering to your packaging needs with precision and reliability. Machine Specifications: Machine Type: Shrinkwrapper Brand: SMI Model: SK 450T Year of Construction: 2001 Max Speed: 45 packs per minute (ppm) Container Material: Glass Max Container Height: 340 mm Package Type: Film Tray Number of Slopes: 6 Max Reel Size: 500 mm Number of Reels: 2 Operator Side: Right Condition: As It Is Warranty: 6 Months Enhanced Efficiency and Versatility: The SMI SK 450T is engineered to elevate your packaging operations with its remarkable speed of up to 45 packs per minute. Its compatibility with glass containers and film trays ensures a sleek and professional presentation for your products. Precision and Flexibility in Packaging: With six slopes accommodating various container sizes and a maximum reel size of 500 mm, the SK 450T can accommodate diverse packaging requirements, providing the precision and flexibility your production demands. Iijdpfx Aovgudxjabeh Seamless Operation and Monitoring: The SK 450T is equipped with an intuitive Human Machine Interface (HMI). Programmable Logic Controller (PLC), both developed by SMI. This guarantees ease of operation and comprehensive monitoring of the machine’s performance. Crafted for Optimal Ergonomics: The machine’s worktop height of 1200 mm is meticulously designed to provide ergonomic comfort during operation, reducing operator fatigue and boosting productivity. Satisfy Your Packaging Needs with Confidence: Don’t miss the opportunity to optimize your packaging process with the exceptional SMI SK 450T Shrink Wrapper. This machine’s advanced features, coupled with its reputation for performance and durability, make it a must-have for businesses seeking a competitive edge. Reach out to us today to learn more about the SMI SK 450T and how it can revolutionize your packaging operations. Elevate your production efficiency and product presentation with this premium shrink wrapping solution from SMI.

Condition: used, Year of construction: 2008, operating hours: 2,000 h, Used Shrink Wrapper Zambelli LFT 30 S/F Manufacturer: ZAMBELLI, Italia – 2008. Model: LFT 30 Capacity: 30 packs/min Working hours: only 2,100 Packer is for PET bottles only 1.5 – 2.0 – 2.5 l (packs 3×2) Not for smaller bottle volumes Packaging with foil without pad The machine is still connected. Preserved in good condition. General Description Iiedpfsvguwxjx Aabjh Machine for packaging in heat-retractable material, continuous movement, no sealers, Latest generation for medium and high production levels. Maximum speed depending on machine model type of product and bundle to be formed Unique design features in this type of machine: no mechanical parts on the operator side, thus giving great accessibility. mechanical parts grouped on opposite side to operator, thus making all routine and non-routine maintenance jobs simpler and faster. Used Shrink Wrapper Great range of choice, both in formats and versions. Simple and very quick format change. Electronic film unwinding and cutting. Film cutting with rotating blade. Usable film thickness from 40μ to 80μ. Possibility of using large reel size giving maximum working autonomy. The whole machine functions are supervised and controlled by a Zambelli computer. Machine complete with all safeguards, in accordance with current safety regulations. All machine configurations with possibility of working on a number of tracks. Vast range of optionals, including: computer for production data processing, antistatic bar, print registration, etc. The computer is particularly useful in that it can also be used for the careful planning of the machine’s preventive maintenance schedules. The controls are centrally grouped on an on-board control panel. All the motors are protected with automatic magnetothermal switches. Special care has been taken in the design stage to ensure that the machine is simple to run, with easy access for maintenance work. All the mechanical parts are grouped on the opposite side to the operator, for the following reasons: a) To allow access to the product with the minimum number of obstacles. b) To give maximum access for all routine and non-routine maintenance jobs, making them as quick and easy as possible. c) To simplify enormously all operations on the product conveyor belts, especially belt changing operations. OPERATIVE FLOW LFT 30 S/F The products reach the machine with the help of a feed belt positioned in line with the outfeed. A proper device divides up the required number of rows into the infeed guides. A sensor upstream of the feed controls the quantity of product. If the quantity of incoming falls below the minimum set level, the machine will slowly decelerate and stop.