Used Shrinking for sale (473)

Condition: used, Used filling line for beer in cans 25000 cph Kedpfxsw Ahfao Aabedu The used filling line for beer in cans 25000 cph delivers high-speed beer canning across multiple formats. Specifically, it fills 500 ml, 440 ml, and 330 ml cans with standard 202 lids, consistently reaching a capacity of 25,000 cans per hour. Although the line remains installed, it is currently not operational. Nevertheless, all components remain in excellent working condition. Empty can feeding system To begin with, a Linker DPG-500 depalletizer, built in 2012, unloads empty cans at the start of the line. Subsequently, rope conveyors from Linker (model RC/KHS, 2012) transport the cans to a Triplexrinser TR/KHS rinser, also from 2012. In this section, the system moves cans smoothly and prepares them efficiently for the next stage. As a result, the line ensures gentle handling while maintaining productivity. Filling and seaming Next, the KHS Innofill DVD 60 filler, installed in 2017, performs the filling process using 60 dedicated valves. In parallel, a Ferrum F08 seamer seals the cans, while an NSM 30A lid feeder supplies lids with precision. Consequently, this configuration ensures accurate dosing and secure sealing at high throughput. Notably, the filling and seaming block is among the most recent upgrades to the line. Pasteurization and quality control After sealing, the product passes through a KHS Innopro KZE flash pasteurizer, installed in 2017. Additionally, this unit includes a 5000-liter buffer tank to stabilize the process. Meanwhile, a KHS Innocheck fill level inspector (2012) continuously monitors the liquid level in each can. In doing so, it guarantees compliance with rigorous quality standards. Therefore, the pasteurization and inspection phases preserve both safety and consistency. Secondary packaging and handle application Once the cans are processed, a KHS Innopack Kisters SP 050 B2 multipack packer (2012) wraps them using shrink film—either printed or transparent. It operates on a double-lane system at 50 cycles per minute. Moreover, a KHS CSM 050-02 handle applicator (2011) applies handles at the same speed, which facilitates later transport. In other words, the secondary packaging setup optimizes the line for retail and logistics needs. Tray packing and shrink wrapping Following multipacking, the line uses a KHS Innopack Kisters TP 035 B2 tray packer (2012) to place packs into trays at 35 cycles per minute. Then, a KHS Innopack Kisters FS-AL shrink wrapper (2017) applies shrink film to stabilize the load. Thus, the packs remain secure and compact throughout distribution. Furthermore, both machines maintain high reliability under continuous operation. Palletizing and end-of-line operations At the end of the line, a KHS Innopal MPH 1-1 palletizer (2012) stacks trays without using interlayers. This simplifies the palletizing process while saving materials. Subsequently, a Fiat MFP pallet wrapper (2017) secures the stacked trays with stretch film.

Condition: used, Year of construction: 2003, The BVM Compacta Trend 6020 is a high-performance shrink-wrapping machine designed for efficient and reliable packaging tasks. Manufactured in 2003, this machine is currently in production and located in Germany. It features side sealing and operates in a fully automatic function mode, ensuring consistent and precise wrapping. The Compacta Trend 6020 is suitable for a variety of product applications, including paper, packaging machines, tape strips, and stacks. With a capacity of 60 packages per minute, it can handle materials with a width of 500 mm (19.7 inches) and a length of 450 mm (17.7 inches). Its side sealing capability and inline operation make it an ideal choice for high-volume packaging tasks, ensuring that products are securely wrapped and protected. Format: 650 mm Kdsdpjwc T N Rjfx Aabju Equipment: Shrink-wrapping machine with side sealing Function modefully automatic Product applicationsPaper, for packaging machines, for tape strips, stacks Further propertieswith side sealing, inline, foils Capacity 60 p/min Width 500 mm(19.7 in) Length 450 mm(17.7 in)

Condition: excellent (used), Year of construction: 2007, WITH SHRINK TUNNEL & VIDEOJET Speed: max. up to 10,000 cycles/hour Kdodpfx Aaov D If Djbsu Formats (mm): min. 105 x 148 // max. 250 x 340 Thickness: min. 2 mm, max. 25 mm Counter: 26 million Equipment / Additional information: Processing with film -PE-, PP-, OPP- and PVC-film -Foil thickness min.: 20 my -Film thickness max.: 50 my -Film overlap min.: 30 mm Machine consists of: 1x Autoloader 1x Sliding feeder (for thicker products) 6x Rotary suction feeder 1x Cavalo feeder (landscape format) 1x Welding device (lengthwise & crosswise welding) 1x Videojet addresser 1x Shrink tunnel

Condition: excellent (used), Year of construction: 2001, Eckold Kraftformer KF 665 ECKOLD - KF 665 MACH-ID 9228 Make: ECKOLD Type: KF 665 Year: 2001 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Number of strokes: 150 / 300 / 600Min. Maximum sheet thickness:6.0mm Horizontal troath: 675mm Vertical troath: 450mm Max. thickness Stainles:4.0mm Max. thickness Aluminium:8.0mm Motorised ram adjustment:0 - 80 Power: 4.1kW Length: 1950mm Width: 860mm Height: 2050mm Weight: 2000kg Kdodpfxsxcm Eps Aabou

Condition: excellent (used), Collective lot comprising of: Kedpexnc Epsfx Aabedu - Fillber Monoblock RVOL.TVP 32-8 OMS Filler/Capping System (With Cap Changeover) With Siemens PLC - Posimat Master-15 bottle Unscrambler, SMF Dumper DRH 310 With Posimat Loading Elevator - SMIPACK XP650 ARX-VS Overlap Shrink Wrapping Machine with FLXMOD Control System - Epackaging Saturno 1T High Speed Labelling System - ASMECH BESPOKE CONVEYOR SYSTEM With Travelator & Bottle Sorting Unit

Condition: used, Year of construction: 2004, Sealing bar length 2500 mm Maximum width of upper reel 2400 mm Maximum width of lower reel 1450 mm Width of conveyor belt 1300 mm Length of entry belt 4800 mm Maximum useful height 800 mm belt speed 5-25 m/min with inverter heat shrink tunnel kw 50 Kdsdpswh A Hcefx Aabju

Condition: used, Used bottling line SMI for CSD 14000 bph: technical specifications Kdjdpswt Urbefx Aabou SMI built the Used bottling line SMI for CSD 14000 bph in 2010 and configured it for bottling carbonated soft drinks and sparkling water in PET containers. Consequently, the line reaches a production speed of 14,000 bottles per hour and processes 0.50 L, 1.0 L, and 1.5 L formats with high efficiency. Moreover, the layout allows for seamless integration of all subcomponents. Containers and packaging The system handles PET bottles with a 28 ALASKA 267 neck and uses plastic screw caps for sealing. It applies adhesive labels, while packaging is done using shrink film only. In particular, the line supports 3×2 and 4×3 bundling patterns depending on the container size. It also applies adhesive-tape handles to each bundle, ensuring ergonomic handling. As a result, the packaging meets both logistical and retail requirements. The palletizing system uses wooden pallets measuring 800×1200 mm, which conform to standard European formats. Main components of the bottling line The Used bottling line SMI for CSD 14000 bph includes an Ecobloc 8-66-8 block by SMI, which integrates stretch-blow molding, filling, and capping into one compact structure. Therefore, it reduces both footprint and maintenance complexity. A Smiform chiller, also by SMI, provides reliable cooling throughout the bottling cycle. Furthermore, the Chemicount Lubry-Sec unit doses lubricants precisely into the system. As such, it ensures smooth container flow along the conveyors. A P.E. Labellers machine applies the adhesive labels with accurate alignment. Additionally, a VIDEOJET printer prints batch codes, expiration dates, and other data directly onto the bottles. Conveying and end-of-line equipment SMI’s Smiline conveyors transport bottles throughout the entire line with high reliability. At this stage, the Smiflexi handle applicator places adhesive handles on multipacks efficiently and with minimal downtime. Next, the SK 450 F shrink wrapper, also by SMI, bundles the bottles using shrink film, adapting to different formats automatically. Following this, the Smipal palletizer stacks the finished packs onto pallets in optimized layouts. Finally, the Biesse Orbiter pallet wrapper secures the load with stretch film, preparing it for transport. Environmental and operational conditions The Used bottling line SMI for CSD 14000 bph operates in ambient temperatures between -5°C and +35°C. In indoor conditions, it performs best between +20°C and +30°C. It functions reliably at altitudes up to 500 meters above sea level, making it suitable for many production facilities. Humidity up to 60 percent does not impair functionality; however, maintaining proper ventilation is advisable. The system requires a 400 V power supply with a frequency of 50 Hz and tolerates voltage variations of ±10 percent. Operators must supply blowing air at 40 bar and service air between 4 and 10 bar, depending on the machine.

Condition: new, Year of construction: 2018, Automatic L-sealer Kodpfjwriuusx Aabodu Manufacturer: Diez Model: AWS4535 Year of manufacture: 2018 No operating hours! Sealing frame: 500 x 350 mm Band width: 32 mm External dimensions: 170 x 130 x 135 cm

Condition: excellent (used), Year of construction: 1980, ECKOLD - KF 460 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Kdsdpfx Aajxcluvsbsu Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Number of strokes: 300 / 600Min. Maximum sheet thickness:4.0mm Horizontal troath: 460mm Vertical troath: 475mm Max. thickness Stainles:2.0mm Max. thickness Aluminium:3.0mm Motorised ram adjustment:0 - 60 Power: 3.0kW Length: 1700mm Width: 810mm Height: 1700mm Weight: 1250kg

Condition: used, Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph The Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph ensures good-performance bottling for mineral water, sparkling water, and carbonated soft drinks (CSD). Specifically, it processes PET containers in 1.5 l format, using isobaric filling technology to preserve the quality of both carbonated and non-carbonated beverages. Moreover, the bottle neck standard is PCO 1810. In addition, this Used Bottling Line KRONES for still, sparkling water and CSD – 12000 bph integrates synchronized machines, thereby optimizing every production step, from preform feeding to final packaging and palletizing. Preform Feeding and Preparation in this Used Bottling Line KRONES The process begins with the preform feeder, which continuously supplies preforms to the preform inverter. As a result, the line maintains a smooth and consistent flow, with correct alignment of preforms before the blowing process. Blow Molding Machine Next, the blow molding machine—a Krones Contiform Compact 10, year 2001—uses a Siemens S5 control system to manage heating and blowing phases. Consequently, it transforms preforms into precisely shaped PET bottles ready for downstream processes. Air Conveyors of the Used Bottling Line KRONES for still and sparkling water Once the bottles are formed, they are transferred via Krones AirCo air conveyors, model AirCo, year 2011. These conveyors extend for approximately 110 meters. Furthermore, they are controlled by inverters and a Siemens S5 controller, ensuring the transport to the next station. Mixing and Carbonation Unit Before filling, the product passes through the mixing and carbonation unit, a Krones MS, year 1992. This system mixes water and syrup, and then carbonates the product with CO₂ for sparkling drinks, or injects nitrogen for still water. Notably, the unit ensures continuous operation and mixing, thus maintaining product consistency throughout production. Filling Monoblock Following the mixer, the filling monoblock—Krones VK PET 100 SV K, year 1993—comes into action. Controlled by a Schleicher system, it includes: Bottle rinsing unit Isobaric filling machine, suitable for both still and carbonated beverages Kdjdpfx Aowa Tqceabeu Capping unit for PCO 1810 PET bottles CIP (Cleaning-In-Place) connections Capacity to handle 1.5 l format Importantly, this unit represents the heart of the line, performing several critical functions within a compact and coordinated block. Labeling Machine Immediately after filling, a Krones labeling machine, model Canmatic, year 1997, applies labels to PET bottles with precision. As such, it ensures accurate positioning and high throughput, contributing to a professional final presentation. Shrink Wrapper Subsequently, the shrink wrapper—Dimac Green Star Big, year 2011—forms multipacks using shrink film.

Condition: used, Used bottling Line GAI for still wine up to 1600 bph The is line for still wine, therefore, delivers a highly reliable solution for processing bottles of various sizes. Furthermore, each component ensures precision and quality throughout all operational stages, meeting high standards for the wine industry. Filling Monoblock in the Used bottling Line GAI for still wine up to 1600 bph The GAI model 3005 TOP filling monoblock, as a result, optimizes bottle cleaning with its 12 rinsing clamps. Moreover, it removes residual oxygen using a deaeration head and ensures precise dosing with 16 filling valves. Additionally, a CO2 injection head actively creates a protective atmosphere, preventing oxidation and preserving product quality. Format Compatibility The line, in particular, supports bottles of 0.375 liters, 0.75 liters, and 1.5 liters. It also accommodates straight corks with standard dimensions of 22×38 mm, 25×38 mm, and 24×25 mm. Consequently, this versatility makes the line adaptable to various production needs. Component Connection GAI conveyors, in turn, connect the filling monoblock to the capsuling and labeling system, ensuring a continuous flow and efficient transfer of bottles through different production stages. Moreover, these conveyors allow seamless integration of the various components. Capping and Labeling Monoblock The GAI MEB 9320 monoblock, in addition, improves production with two wash-dry heads, two heat-shrinking heads, and two smoothing heads. Besides, it applies labels with two labeling stations and marks bottles with a hot stamping unit. Thus, this system delivers professional and consistent results while controlling the final processing stages. Consumption and Technical Specifications Ksdpfxovgu T To Aabjdu The line operates efficiently since its air consumption is tailored to each component. For instance, the heads consume 400 Newton/hour, while the bottom blowing system uses 20,000 Newton/hour, and the system runs at a pressure of 6 bar. Additionally, the installed power reaches 10.63 kW, while the monoblock weighs 1,500 kg. Capsule autonomy, in comparison, ranges between 300 and 600 units. Used bottling Line GAI for still wine up to 1600 bph condition Technicians have overhauled the entire line to ensure readiness for immediate operation. Consequently, the high-quality components and careful design make this line, without a doubt, an ideal choice for bottling still wines at a capacity of up to 1600 bottles per hour.

Condition: used, operating hours: 45,000 h, Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow.  Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 2005, forms the bottles at the core of the process. Notably, this machine transforms preforms into finished bottles using high pressure compressed air. Therefore, SIDEL technology ensures precise shaping and optimizes PET material usage, minimizing waste. Filling Monoblock The Sidel 36 36 9 filling monoblock, also from 2005, performs rinsing, filling, and capping in a single compact unit. This design maximizes space efficiency and reduces transfer times between stages. Consequently, the volumetric filling system delivers precise dosing, which ensures the final product quality. Labeling Machine The PE Labellers ROLLMATIC labeling machine, from 2005, applies wrap around labels to containers. Advanced technology positions labels accurately, thus enhancing the finished product appearance. This system works perfectly for PET water bottles, meeting the line speed and quality requirements. Shrink Wrapper The Sidel Cermex shrink wrapper, from 2005, performs secondary packaging. Specifically, the machine uses shrink film to create compact and secure packs. As a result, this process enhances logistics and product distribution while protecting items during transport. Conveyors in the Used Bottling Line SIDEL for still water up to 12000 bph The line operates with a complete system of conveyors, both air and ground. These conveyors maintain a continuous and uninterrupted flow between production stages. Additionally, the conveyors minimize downtime and ensure high operational efficiency. Technical advantages of the line Kdjdpfx Aevgva Ujabeu This used bottling line delivers reliability and robustness, even with its 2005 manufacturing date. Moreover, all machines ensure a long operational life and reduce maintenance costs. The system efficiently bottles still water, ensuring a specific and contamination free process. Furthermore, SIDEL machinery integrates seamlessly with complementary components, such as the labeling machine and shrink wrapper, to maintain a uniform production flow. With a speed of 12000 bottles per hour, this line supports companies with consistent production demands. Conclusion The used SIDEL bottling line for still water up to 12000 bottles per hour provides a reliable and highly efficient solution for the bottling sector. Therefore, with robust machinery and an optimized configuration, it meets the needs of technicians and experts requiring a complete solution for producing PET water bottles.  

Condition: used, operating hours: 3,000 h, Used complete isobaric bottling line for CSD 6400 bph Technical Overview of the Line This Used complete isobaric bottling line for CSD 6400 bph produces carbonated soft drinks with a nominal output of 6400 bottles per hour. Specifically, the line handles 0.50-liter PET containers using an isobaric filling system. In particular, this technology maintains constant internal pressure during the filling process. As a result, it prevents carbon dioxide loss and ensures that the final product preserves its quality and carbonation from tank to cap. Container Compatibility and Specifications The line supports PET bottles with 18-10 and 18-81 PCO necks, which represent standard formats across the beverage industry. Consequently, operators can integrate the system into existing lines without modifying downstream capping equipment. In addition, this compatibility facilitates bottle sourcing and packaging flexibility. Furthermore, the system ensures that transitions between production batches remain smooth and efficient. Working Hours and Line Condition The machines in this Used complete isobaric bottling line for CSD 6400 bph have completed only 3000 hours of operation. In comparison to similar used systems, this relatively low usage indicates limited wear on mechanical parts. Therefore, technicians can expect excellent performance with minimal maintenance needs. Moreover, this condition makes the line suitable for facilities that require immediate deployment with limited downtime. Ksdpfxjwahdqj Aabsdu Line Composition The process begins with a Sidel SBO4 COMPACT blow molding machine, built in 2006, which forms PET bottles directly from preforms. Then, the Simonazzi-Sidel Starblend mixer, manufactured in 2007 blends water, syrup, and carbon dioxide under pressure. Afterward, the product is managed in the Simonazzi-Sidel Bluestar filling monoblock, also from 2007. This unit includes 32 grippers, 32 isobaric filling valves, and 8 capping heads. Thanks to this configuration, the line fills and caps each bottle quickly while maintaining product integrity. Additionally, the machine layout allows for optimal integration of automation and operator access. Notably, each module connects via pre-aligned interfaces, which streamline installation and minimize commissioning time. Altogether, these features contribute to high production efficiency and ease of maintenance. Quality Control and End of  this Used complete isobaric bottling line To guarantee packaging integrity, the line includes a Heuft inspection unit that checks bottle necks and caps for defects. Following inspection, the bottles pass through a Sidel RollQUATTRO F15 labeling machine (2007), which applies wrap-around labels at high speed with precision. Subsequently, a Cermex CP 18 AAE shrink wrapper (2006) packages bottles into multipacks using shrink film. Throughout the process, Sidel conveyors transfer bottles between stations without creating friction points or mechanical delays.

Condition: used, Year of construction: 1999, Used Capsuling Machine ROBINO GALANDRINO up to 15000 bph Introduction The machine provides a highly efficient solution for the bottling process. Specifically, it is suitable for operations requiring a machine with a production capacity of up to 15,000 bottles per hour (bph). This specific model, in particular, applies heat-shrink capsules, ensuring a secure and uniform closure on a wide range of bottles. Technical Specifications The MONOSTADIO Z T8 model, for instance, features 8 thermal heads, allowing it to operate at speeds of up to 15,000 bph. Consequently, the machine moves bottles from left to right, which is crucial for integrating it with other line equipment. Safety and Protections The machine, therefore, prioritizes operational safety with guards installed along its entire perimeter. Consequently, these safety guards minimize the risk of accidents during operation and ensure a safe working environment for operators. Additionally, the design complies with current safety regulations, ensuring reliability. Documentation and History This specific capsuling machine branded ROBINO GALANDRINO,  was built in 1999, includes a paper-based electrical schematic. This documentation is essential, as it aids in maintenance and troubleshooting. Moreover, it facilitates technical interventions when needed. The machine is currently not in use, but it’s production was stopped while it was in perfect working conditions. Conclusions of the Used capsuling Machine ROBINO GALANDRINO up to 15000 bph Kdodpfx Asvgvkmsabou This capsuling machine, model MONOSTADIO Z T8, offers a capacity of 15,000 bph and utilizes heat-shrink capsules to ensure secure closure. Furthermore, its safety guards and included technical documentation make it a robust choice for bottling lines that demand high productivity and reliability. Consequently, verify bottle diameters and conduct regular maintenance to optimize the machine’s performance.

Condition: used, Used Filling Line Sidel For Water 2014 Air Compressor ABC 3HA-4-TFK-LT 200kw Air compressor Low Fusheng SA75 75KW Ice water Machine Nanjing Wuzhou LSBLG 1290DT 1256.8KW 298.8KW Ice water machine Shanghai Baoqing WA-78W/PT4EN-I 49kw Blow Molding Machine SIDEL/SBO20 Blower Capacity：36000P/H Power：406KW Spindle heads 262 pcs Manipulator 10pcs/each Blow moulding satation 20 pcs SIDEL Filling Machine Capacity： 36000P/H Power： 35KW Filling Valves 60pcs Capping heads 15 pcs SIDEL 36000 bph Labelling Machine Capacity： 600B/min Kedovlgqhspfx Aabjdu Power： 50KW Vacuum drum 1 set Scaleplate 2 pcs Capping heads 20 pcs SMI Shrink Wrapper Capacity： 35 P/Min Power： 75KW Divider： 4 sets Infeed： 4 sets Former 5 sets TW Benifit Palletizer with Conveyor and Divider Capacity： 35 P/M Power： 25KW Used Filling Line Sidel For Water 2014, this complete line for water is in excellent conditions and ready immediately for sale

Condition: used, Krones 48,000-bottle-per-hour (BPH) complete bottling line for non-carbonated products is designed for PET containers with sizes of 0.38 L and 0.55 L, using volumetric filling and 30/25 type necks. The line includes several key components, including a 2015 Krones Contiform blow molding machine with 22 cavities, a 2015 Krones Contifeed preform conveyor, and a 2015 Krones Contiform 50-20 filling monoblock. The system also includes 2021 Hawkeye Smart C-3000 and 2020 Krones Linadry air dryers, 2021 Krones labeling machines, and several other machines for inspection, packaging, shrink wrapping, and palletizing. Kdjdpfxjvlwpuo Aabeu This used bottling line is ready to use and monitors the operational status of each machine monthly to ensure maximum efficiency and reliability. Krones Contiform 2015 blow molding machine with 22 cavities of Used Complete Bottling Line Krones for Still products 48000 bph The Krones Contiform 2015 blow molding machine with 22 cavities of this krones line is designed for high-speed production of PET containers, with an output capacity of up to 48,000 bottles per hour. The Contiform uses an optimized linear infrared heating module for preforms up to 160 mm in length and 48.5 mm in support ledge diameter. This model features advanced blow molding technology, enabling production of up to 2,750 containers per cavity per hour, while reducing compressed air consumption by 15% compared to previous models. The intelligent control system of the Contiform ensures consistent bottle quality through various optional modules, such as the Prejet preform internal cleaning system and the PET-View inspection system for integrated quality control of preforms and containers. The machine includes a blowing module with an advanced mold clamping mechanism, eliminating the need for a pressure pad and allowing the production of bottles up to 2.0 liters in volume on a reduced-size blowing module, occupying 22% less space than previous models. The active transfer system with five-point heating mandrels in the linear oven and reduced number of internal horizontal transfer points for preforms and containers improve operational efficiency. The high-precision Monotec servo motors with real-time synchronization ensure precise and reliable handling of preforms throughout the blow molding process. Krones Contifeed 2015 preform conveyor The Krones Contifeed 2015 preform conveyor is designed to ensure continuous and consistent feeding of preforms to the blow molding machine. The Contifeed system supports various types of preforms, including lightweight, standard, and heavy, and is available in three models suited to the respective blow molder capacity. The feed rail variants include a gravity system for common preforms and an air-assisted system, ideal for lightweight preforms and high-speed applications. The Contifeed features automatic adjustment for quick format changes, hygienic design, and a soft-tilting preform tipper for gentle preform feeding.

Condition: used, Year of construction: 2001, Used Shrink Wrapper SMI SK 450T – 45 ppm – tray If you’re in the market for a top-tier shrink wrapping solution, look no further than the SMI SK 450T. This machine, crafted by the renowned brand SMI in 2001, represents a pinnacle of engineering and design, catering to your packaging needs with precision and reliability. Machine Specifications: Machine Type: Shrinkwrapper Brand: SMI Model: SK 450T Year of Construction: 2001 Max Speed: 45 packs per minute (ppm) Container Material: Glass Max Container Height: 340 mm Package Type: Film Tray Number of Slopes: 6 Max Reel Size: 500 mm Number of Reels: 2 Operator Side: Right Condition: As It Is Warranty: 6 Months Enhanced Efficiency and Versatility: The SMI SK 450T is engineered to elevate your packaging operations with its remarkable speed of up to 45 packs per minute. Its compatibility with glass containers and film trays ensures a sleek and professional presentation for your products. Precision and Flexibility in Packaging: With six slopes accommodating various container sizes and a maximum reel size of 500 mm, the SK 450T can accommodate diverse packaging requirements, providing the precision and flexibility your production demands. Seamless Operation and Monitoring: The SK 450T is equipped with an intuitive Human Machine Interface (HMI). Programmable Logic Controller (PLC), both developed by SMI. This guarantees ease of operation and comprehensive monitoring of the machine’s performance. Kedpfx Aevgudxoabsdu Crafted for Optimal Ergonomics: The machine’s worktop height of 1200 mm is meticulously designed to provide ergonomic comfort during operation, reducing operator fatigue and boosting productivity. Satisfy Your Packaging Needs with Confidence: Don’t miss the opportunity to optimize your packaging process with the exceptional SMI SK 450T Shrink Wrapper. This machine’s advanced features, coupled with its reputation for performance and durability, make it a must-have for businesses seeking a competitive edge. Reach out to us today to learn more about the SMI SK 450T and how it can revolutionize your packaging operations. Elevate your production efficiency and product presentation with this premium shrink wrapping solution from SMI.

Condition: used, Year of construction: 2013, Used capsuling equipment Nortan Prisma 4T 6000 bph This used capsuling equipment was rebuilt in 2013 as a new, and shrink-wrap capsule type. Safeguards are available for this Used rotary capsuling machine There are three different sets of bottle equipment available. The machine has been checked before dismantling. It is in good working condition and has been in operation until September 2021. It has automatic storage for the shrink capsules. A photocell connects the components to the main structure, which releases capsules for incoming bottles, completely automatically and synchronized. Despite its simplicity, maintenance is very important for this capsuling machine. The thermal heads and their gaskets, need to be checked carefully. The electrical panel is in order and complete with all cables and PLC, manuals, and wiring diagrams. Ksdpsvguvzjfx Aabodu The floor space required for this used capsuling machine square meters 4,50. Max. speed is 6,000 b\h. The Used rotary capsuling machine, has a whole set of stars, augers, and counter-stars to convey the bottle correctly. The direction of entry is from left to right and therefore clockwise. This machine is specific for glass containers. It can handle formats ranging from 0.50 L, to 0.75 L up to the size of 1 L. Nortan is one of the most common brands in circulation, it is therefore easy to find any spare parts for the machine.

Condition: used, Used Bottling Line Tehnometal up to 6500 bph Kdjdpfxevgvq He Aabou The bottling machinery, known as Used Bottling Line Tehnometal up to 6500 bph, provides a highly efficient solution for the bottling industry. This plant, comprising high-quality components and featuring advanced technical specifications, ensures optimal performance and long operational life. Blower KRUPP Corpoplast Blomax 6 of the Used Bottling Line Tehnometal The Blower KRUPP Corpoplast Blomax 6, produced in Germany in 1999, underwent general repairs in 2016 after purchase. Consequently, this component has a capacity of 6,500 bottles per hour (bph) for 1.5-liter bottles and 7,000 bph for 0.5-liter bottles with 6 cavities. The blower includes a cooler but lacks a compressor. Furthermore, the available molds allow for the production of 0.5, 1.5, and 2.0-liter bottles. An air conveyor, 40 meters long, connects the blower to the monobloc. Monobloc TEHNOMETAL The monobloc TEHNOMETAL, produced in Serbia in 2014, integrates rinsing, filling, and capping functions. Moreover, this component matches the blower’s capacity, handling 6,500 bph for 1.5-liter bottles. The monobloc accommodates PET bottles with a 28 mm neck and PCO 1810 neck. Its configuration, therefore, ensures continuous and smooth production, enhancing the efficiency of the bottling line. Labeller TEHNOMETAL The labeller TEHNOMETAL, produced in Serbia in 2015, applies OPP (oriented polypropylene) labels directly from the roll. This system, hence, ensures perfect label adhesion and a high-quality finish for each bottle. Using OPP labels guarantees durability and moisture resistance, thus enhancing the presentation of the final product. Shrink Wrapper TEHNOMETAL The shrink wrapper TEHNOMETAL creates packages of 2×3 and 3×4 bottles. This component securely wraps the packages in shrink film, protecting the bottles during transport and storage. The flexibility in package configurations, as a result, offers versatile packaging options to meet different market needs. Conveyor Belts and Technical Documentation The conveyor belts included in the Used Bottling Line Tehnometal up to 6500 bph ensure a continuous flow of bottles between the various components of the system. The detailed technical documentation provides all the necessary information for installation, maintenance, and operation of the bottling line. This documentation, in turn, enables technicians to effectively manage the machinery, reducing downtime and increasing productivity. Spare Parts and Space Requirements The available spare parts allow for quick resolution of any faults, minimizing machine downtime. The machinery installation requires a space of 200 m², thereby ensuring sufficient room for operation and maintenance. The compact design of the system allows efficient use of available space, making the machinery suitable for various plant configurations. Conclusion of the Used Bottling Line Tehnometal In conclusion, the Used Bottling Line Tehnometal up to 6500 bph provides a complete and highly efficient solution for bottling needs.

Condition: used, Used Bottling Line for ESL MILK up to 2500 bph We present a used bottling line engineered for maximum efficiency and reliability in packaging ESL milk. Furthermore, this line is optimized to ensure continuous and high-quality production, with a nominal capacity of 2500 bottles per hour (bph). Nominal Capacity and Configuration of the Bottling Line for ESL Milk The nominal capacity of 2500 bph arises from a precise arrangement of the main components. Firstly, the line includes 12 filling heads and 1 capping head, ensuring a smooth and uniform flow during the bottling process. Moreover, it handles round PET bottles with a standard format of 1000 ml. Product and Packaging Specifications This line is designed for round PET bottles, with a standard format of 1000 ml. It accommodates both pasteurized and ESL pasteurized milk, ensuring maximum versatility in production. Power Feeding and Distribution Features The line requires an electrical supply of 400 Volts at 50 Hz and is configured for a three-phase distribution system with separate neutral and ground. Additionally, it requires a minimum pressure of 7 bar for the low-pressure compressed air system. Filling Environment and Blow Molding Ksdpovgvr Rofx Aabjdu The filling process occurs in an ultra-clean environment at a temperature of 4°C, ensuring maximum product quality and freshness. Moreover, the used blow molder, a Kosme KSB 4 L model, optimizes PET bottles of various sizes, with a production speed of up to 6800 bottles per hour. Energy and Water Consumption The line is designed for optimized energy and water consumption. It consumes an average of 36 kW of electricity, with an installed power of 56 kW. Additionally, it necessitates a cooling water flow of 6.6m3/h at a temperature of 5-7°C. Performance and Efficiency The line achieves a maximum output of 1700 bottles per hour per mold unit, thanks to pneumatic preform separation and precise servo motor controls. Moreover, it features short deaeration times, ensuring optimal use of blow molding time. Additional Components In addition to the blow molder and filling line, we specifically include the AVE mod. 12/12/1 MLK automatic monoblock for packaging fresh milk in 1000 ml PET bottles, complete with rinsing, filling, and capping systems. Furthermore, a SIMAC 2500BPH labeler and Mariani FS-T10 automatic shrink wrapper provide a comprehensive and automated packaging solution. Optional upgrade of the ESL Monoblock If needed the Monoblock present in the Used Bottling line for ESL milk can be complemented by some elements to enhance its functionality. An H2O2 an H2O2 hydrogen peroxide injection system can be installed to sanitize the bottles. An inlet screw would allow 1 ml of H2O2 to be nebulized, while a UV lamp on the capper would ensure the sterilization of the caps. A compressed air microfiltration system and a pressurized environment with HEPA filters would ensure a sterile environment.

Condition: used, Year of construction: 2005, Used Filling Monoblock FIMER 9/1/1/2 up to 900 bph The Used Filling Monoblock FIMER 9/1/1/2 up to 900 bph ensures efficient and precise bottling operations for still wine. Specifically, it handles approximately 900 bottles per hour on the 500 ml format. Moreover, it seamlessly completes the processes of filling, corking, shrink cap application, and front-and-back labeling. Filling and Corking Technology of the Filling Monoblock FIMER 9/1/1/2 To begin with, the Filling Monoblock FIMER 9/1/1/2 includes a deaeration station at the filler inlet and 9 filling valves that operate with gravity and light depression technology. As a result, this system gently fills the product, minimizes waste, and preserves the wine’s quality. Additionally, the integrated corker uses a vacuum system to seal cork stoppers efficiently, which ultimately delivers long-lasting results. Capsule Application and Labeling Furthermore, the capsule applicator precisely places shrink caps onto bottles, ensuring accuracy. Meanwhile, the two-group ENOS labeler applies front and back labels uniformly and without defects. Consequently, this integrated process guarantees high-quality finishes that fully meet oenological industry standards. Energy Consumption and Technical Specifications In terms of energy efficiency, the Filling Monoblock FIMER 9/1/1/2 consumes 4 kW of power at 380V and 50Hz. Therefore, its energy-efficient design significantly reduces operating costs. In addition, it aligns with industrial standards, which ensures both sustainable and cost-effective production. Operating Conditions and Advantages The Used Filling Monoblock FIMER 9/1/1/2 up to 900 bph has seen minimal use and, as a result, remains in excellent operating condition. Not only does it combine all processing stages into a single structure, but it also optimizes production times. Likewise, it saves valuable floor space while improving overall process control. Conclusion of the Filling Monoblock FIMER 9/1/1/2 Kdodpfevhblfsx Aabsu In conclusion,the monoblock provides a reliable and versatile solution for bottling still wine. Specifically, its gravity and light depression filling technology ensures gentle handling of the product while maintaining high performance. Therefore, wineries and production facilities can confidently depend on this machine for consistent results, efficient energy consumption, and exceptional product quality. All in all, it offers an excellent balance of productivity, reliability, and cost-effectiveness.

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes. Kdsdpfxjwr T Ews Aabsu

Condition: used, Year of construction: 2008, operating hours: 2,000 h, Used Shrink Wrapper Zambelli LFT 30 S/F Manufacturer: ZAMBELLI, Italia – 2008. Model: LFT 30 Capacity: 30 packs/min Working hours: only 2,100 Packer is for PET bottles only 1.5 – 2.0 – 2.5 l (packs 3×2) Not for smaller bottle volumes Packaging with foil without pad The machine is still connected. Preserved in good condition. General Description Machine for packaging in heat-retractable material, continuous movement, no sealers, Latest generation for medium and high production levels. Maximum speed depending on machine model type of product and bundle to be formed Unique design features in this type of machine: no mechanical parts on the operator side, thus giving great accessibility. mechanical parts grouped on opposite side to operator, thus making all routine and non-routine maintenance jobs simpler and faster. Kdsdpsvguwxjfx Aabeu Used Shrink Wrapper Great range of choice, both in formats and versions. Simple and very quick format change. Electronic film unwinding and cutting. Film cutting with rotating blade. Usable film thickness from 40μ to 80μ. Possibility of using large reel size giving maximum working autonomy. The whole machine functions are supervised and controlled by a Zambelli computer. Machine complete with all safeguards, in accordance with current safety regulations. All machine configurations with possibility of working on a number of tracks. Vast range of optionals, including: computer for production data processing, antistatic bar, print registration, etc. The computer is particularly useful in that it can also be used for the careful planning of the machine’s preventive maintenance schedules. The controls are centrally grouped on an on-board control panel. All the motors are protected with automatic magnetothermal switches. Special care has been taken in the design stage to ensure that the machine is simple to run, with easy access for maintenance work. All the mechanical parts are grouped on the opposite side to the operator, for the following reasons: a) To allow access to the product with the minimum number of obstacles. b) To give maximum access for all routine and non-routine maintenance jobs, making them as quick and easy as possible. c) To simplify enormously all operations on the product conveyor belts, especially belt changing operations. OPERATIVE FLOW LFT 30 S/F The products reach the machine with the help of a feed belt positioned in line with the outfeed. A proper device divides up the required number of rows into the infeed guides. A sensor upstream of the feed controls the quantity of product. If the quantity of incoming falls below the minimum set level, the machine will slowly decelerate and stop.

Condition: used, Year of construction: 1997, Used Dimac Star Wrap R45 Shrink Wrapper 1997 This shrink wrapper was manufactured in 1997 by Dimac. The model is Starfilm and it has a capacity of 35 packs per hour. It currently produces packs of 12 bottles of oil but can be adapted to other formats. Comes complete with a divider inserter. Ksdsvgvzfspfx Aabjdu Power supply: 380 V and 50 Hz Internal auxiliary power supply: 24 AC and 24 DC The used Dimac Star Wrap R45 Shrink Wrapper 1997 is in good condition and ready for sale.

Condition: used, Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line includes, among other components, an AF high-pressure compressor (model CE46A) and a Fusheng low-pressure compressor (model SA110A). In addition, a BAC cooling tower manages process temperatures effectively. The SIDEL SB014 blow molder, which includes a hopper, feeder, and dust remover, connects directly to the SIDEL SFGL40/10 filling machine. Consequently, the line maintains efficiency across all stages. Labeling and packaging SIDEL integrated a Rollquattro labeler that applies roll-fed wraparound labels with precision. Moreover, a shrink-wrapper creates stable multi-pack bundles using plastic film. The VANTA WSD-B350 carton packer, built in 2011, handles up to 35 cartons per minute. Likewise, a palletizer automates the end-of-line phase, thereby preparing products for shipment. Conveying system and internal logistics The conveying system uses SIDEL-built conveyors throughout the process. Accordingly, the line ensures uninterrupted flow from the blow molder to the palletizer. Thanks to this automation, the system reduces manual intervention and improves consistency. In contrast to fragmented setups, this configuration enhances operational control and reduces downtime. Operating conditions and advantages Kdodpew Ahfysfx Aabou This used bottling line SIDEL for still water in PET bottles 25200 bph operates under power and remains available for on-site testing. In practice, the integration of SIDEL machines improves performance while simplifying maintenance. As such, operators can rely on uniform quality and long-term reliability. Applications and compatibility The line suits facilities bottling still water in PET containers of multiple sizes. Importantly, its modular design enables quick format changes with minimal disruption. Because of this, companies can adapt to different production requirements. Notably, the system supports both small batches and high-volume output. Technical conclusion The used bottling line SIDEL for still water in PET bottles 25200 bph delivers a robust, efficient, and scalable bottling solution. Undoubtedly, SIDEL’s engineering ensures durability and optimal integration. For this reason, companies seeking a cost-effective way to expand production will find this line technically sound. Ultimately, it represents a valuable opportunity for those who need to scale operations without investing in new machinery.