Used Side Channel Blower for sale (21,962)

Condition: used, machine/vehicle number: WDB9630031004xxxx, mileage: 2,80,000 km, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21718 Specifications: 2016 model Mileage: approx. 280,000 18 pallets Euro 6 Wheelbase: 580 cm 4x2 354 hp Full air Engine brake Tires (see pictures) Winter tires Thermo king unit Zepro lift Remote control Tool cabinet Compressor horn AC/climate Bed Radio Ready for delivery Kodpfxjxu Av Us Adwoll   Description: 2016 Mercedes Actros 1835 box truck with full side opening. New batteries were installed on the car this year. The lift may have some bolts that need to be replaced. Owner has some pillows that will come with it. Ready for delivery. Km: 280000 HK: 353 Technical approved: Yes EU-approved until: 22.01.2026 Own weight: 11540 Euro: 6 Model: Actros 1835 skapbil m/ Full sideåpning, aggregat, lift og 2 sett dekk Number of pallets: 18

Condition: used, machine/vehicle number: YV2R0P0C4EA76xxxx, mileage: 6,67,000 km, Year of construction: 2014, Please contact ATS Norway for more information Please provide reference number upon request: 22149 Specifications: Kljdpfxoyagavo Adwsl EU approved until 14.08.2026 Mileage: 667,000 km Transmission: Automatic Webasto Exterior height: approx. 4 meters Refrigeration/freezer unit Bussbygg body from 2004 16-pallet box body Full side opening Full air suspension Good tires Trailer hitch VBG coupling Euro 6 – 751 hp Additional lights Tool box 6x2 2 bunks Radio/CD Climate control / AC Ready for delivery Description: 2014 Volvo FH750 6x2 box truck.Euro 6 engine with 751 hp.Body from 2004. 16-pallet box with full side opening. Ready for delivery. Km: 667000 HK: 750 Technical approved: Yes EU-approved until: 14.08.2026 Own weight: 13990 Total Weight: 28000 Payload: 13935 Width: 260 Length: 910 Euro: 6 Model: FH750 6x2 Skapbil m/ full sideåpning og kjøl/frys aggregat. Euro 6! SE VIDEO Gearbox: Automatic

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, operating hours: 20 h, load capacity: 3,000 kg, lifting height: 5,550 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,750 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 – 10.5, rear tire type: cushion tires (black), rear tire size: 22 x 10 x 16, overall weight: 9,500 kg, empty load weight: 6,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, adjustable boom, all wheel drive, fork extension, front guard, full service history, head guard, lighting, pallet forks, sideshift, COMBILIFT CB3000 – 2025 – 6 MTH – DIESEL – TRIPLEX 5,500 mm – FORK POSITIONER – SIDE SHIFT – FULL FREE LIFT 🟢 PURCHASE OR RENTAL AVAILABLE Used and new forklifts with quality guarantee – FT LOGISTICS 🔧 Ready for operation. No compromises. This COMBILIFT CB3000 is more than just a machine — it is the assurance that your logistics will run smoothly, reliably, and without downtime. Engineered for the toughest applications and after complete technical and visual reconditioning, this truck presents as new and is immediately ready for use. 🔍 Key technical details: 📅 Year of manufacture: 2025 ⏱ Operating hours (MTH): 6 ⛽ Drive: Diesel 🏋️ Rated capacity: 3,000 kg 📐 Mast: Triplex – 5,500 mm lifting height 🔄 Fork positioner: 1,750 mm | Forks: 1,200 mm 🛞 Tyres: Solid (100%) ✅ Condition: 5/5 – NEW 📏 Height: 2,250 mm | Length: 1,550 mm | Width: 1,500 mm 📦 Overall height: 2,450 mm 🛞 Tyres: Solid – Front axle 16 x 7 – 10.5 | Rear axle 22 x 10 x 16 ❄️🔥 Fully enclosed heated cab ⚖️ Machine weight: 6,500 kg Klsdpfx Adjyal E Rswel 🎯 Load centre: 600 mm ⬆️ Free lift: 1,520 mm 🏭 Ideal for: - Narrow-aisle warehouses - Timber, steel, and pipe industry - Handling long loads - Indoor and outdoor operations

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, operating hours: 20 h, load capacity: 3,000 kg, lifting height: 5,550 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,750 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 – 10.5, rear tire type: cushion tires (black), rear tire size: 22 x 10 x 16, overall weight: 9,500 kg, empty load weight: 6,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, adjustable boom, all wheel drive, fork extension, front guard, full service history, head guard, lighting, pallet forks, sideshift, COMBILIFT CB3000 – 2025 – 6 MTH – DIESEL – TRIPLEX 5,500 mm – FORK POSITIONER – SIDE SHIFT – FULL FREE LIFT 🟢 PURCHASE OR RENTAL AVAILABLE Used and new forklifts with quality guarantee – FT LOGISTICS 🔧 Ready for operation. No compromises. This COMBILIFT CB3000 is more than just a machine — it is the assurance that your logistics will run smoothly, reliably, and without downtime. Engineered for the toughest applications and after complete technical and visual reconditioning, this truck presents as new and is immediately ready for use. 🔍 Key technical details: 📅 Year of manufacture: 2025 ⏱ Operating hours (MTH): 6 Kedpfxoyalvie Adwjll ⛽ Drive: Diesel 🏋️ Rated capacity: 3,000 kg 📐 Mast: Triplex – 5,500 mm lifting height 🔄 Fork positioner: 1,750 mm | Forks: 1,200 mm 🛞 Tyres: Solid (100%) ✅ Condition: 5/5 – NEW 📏 Height: 2,250 mm | Length: 1,550 mm | Width: 1,500 mm 📦 Overall height: 2,450 mm 🛞 Tyres: Solid – Front axle 16 x 7 – 10.5 | Rear axle 22 x 10 x 16 ❄️🔥 Fully enclosed heated cab ⚖️ Machine weight: 6,500 kg 🎯 Load centre: 600 mm ⬆️ Free lift: 1,520 mm 🏭 Ideal for: - Narrow-aisle warehouses - Timber, steel, and pipe industry - Handling long loads - Indoor and outdoor operations

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls Kjdpfxspkwaxs Adwoll two axes heads regulation spindles speed 6000 RPM electric adjustment of pressure beam feeder with cardan variable regulated feeder solid silenced cabinet

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width 910 mm upper combination unit lower combination unit Kljdpfx Adjxt Dz Aswjl two feed speeds belt oscillation electronic material thickness setting material thickness gauge Table with vacuum pump on the second unit Year of manufacture: 2009 New conveyor belts installed in 2023

Condition: used, We currently have the following blowers in stock: KLIMA CELJE 104CVX560, electric drive 75 kW; RVM 02/71-80, n = 3,000 rpm, electric drive; 2 x SPELLNA VRU-35.1-200-33HO,6, n = 2,910 rpm, electric drive 7.5 kW; VENTA MHI 31.5-50, n = 2,910 rpm, Pm = 7.5 kW; MHI 71, n = 1,450 rpm, electric drive 11 kW; 2 x WOODS plug-in blowers, n = 1,480 rpm. Kodpew I Ef Hefx Adwoll

Condition: used, Planer and rabbeting machine Weinig Profimat 23 for four-sided planning and profiling of timber as construction timber, in excellent original condition and including planer heads (2 x 270 mm // 2 x 170 mm) spindle: 5 spindle 1: Bottom / 7.5 kW / 40 mm spindle 2: Right / 11 kW / 40 mm spindle 3: Left / common motor with right / 40 mm spindle 4: Top / 11 kW / 40 mm spindle 5: Bottom / 4 kW / 40 mm working width: 260 mm Klodpfx Aox Ttbnedwsl working height: 160 mm feed: 4 kW

Condition: good (used), functionality: fully functional, machine/vehicle number: -, Year of construction: 2017, operating hours: 8,578 h, load capacity: 6,000 kg, empty load weight: 9,670 kg, - annual service - service book fully documented - forklift is in very good technical condition - visual defects due to wear Kjdpfx Adoycc Eyjwsll

Condition: new, Year of construction: 2026, Simply top - and practically as if by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Behind this is a sophisticated system that allows all production steps to be carried out with maximum precision at maximum speed. Perfect for all logs that are already milled and/or peeled and waiting for their final shape as posts, poles or palisades. Kodpehm S Rujfx Adwsll Simply point - and practically by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Both models allow three process steps - coping, pointing and chamfering - to be carried out fully automatically at the same time. Without slowing down the production flow: For example, the single-length machine can handle up to 4,000 wood piles and more in single-shift operation. The powerful geared motors run up to top performance via frequency converters - for maximum speed in cutting and cycle time optimization. This has a particularly positive effect when handling different diameters: the processing speed can be easily adapted to the logs.

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm Kledpfowc U Nljx Adwel ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m permitted for automatic mode according to the CE-Norm with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1990, pressure 32 t distance between columns 680 / 550 mm stroke 8 - 50 mm no. of strokes 85 - 500 Hub/min dayligth (stroke and adjustment up) 300 mm column travel -side 250 mm table surface area 620 x 450 mm hole in the table 450 x 110 mm table height over floor 915 mm ram surface 560 x 350 mm Kledpfxjvuuf Ss Adwol power requirement 7,5 kW weight of the machine ca. 5,60 t required space 3,6 x 1,65 x 2,8 m ram adjustment 50 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, pincer feed (ZR 18 D) can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m permitted for automatic mode according to the German Safety Regulations (UVV) Klodpfxevuucwo Adwjl with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1982, pressure 30 t stroke 8 - 40 mm no. of strokes 100 - 600 /min distance between columns 330 mm dayligth (stroke and adjustment up) 280 mm column travel -side 300 mm table surface area 540 x 470 mm hole in the table 315 x 110 mm table height over floor 1000 mm ram surface 250 mm material width 120 mm material thickness - 3,0 mm feed length - 60 mm power requirement 5,5 kW Weight 2,6 t Kljdpfx Aevuk Hrsdwjl dimensions of the machine ca. 1,5 x 1,2 x 2,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manuel ram adjustment, fix table, mechanical roll feed (Bruderer BBV 120/60) table surface 540 x 300 mm or 330 x 390 mm as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1983, pressure 160 t stroke fix 160 mm no. of strokes 30 - 120 /min distance between columns 1190 mm Kedpovuk E Uofx Adwjll dayligth (stroke and adjustment up) 735 mm column travel -side 600 mm table surface area 1200 x 1000 mm hole in the table 500 x 300 mm table height over floor 900 mm ram surface 1000 x 800 mm ram adjustment 125 mm material width 550 mm material thickness 0 - 6,0 mm material cross-cut 1100 mm² feed length 350 mm power requirement 45,0 kW Weight 25,0 t dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, ram interlocking, centralized lubrication, mechanical pincer feed (Haulick, RS 350/550 SL 90) as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1996, pressure 63 t distance between columns 965 mm stroke 4 - 60 mm no. of strokes 30 - 800 Hub/min dayligth (stroke and adjustment up) 380 mm column travel -side 355 mm table surface area 960 x 640 mm hole in the table 850 x 140 mm table height over floor 1150 mm ram surface 960 x 460 mm power requirement 32,5 kW weight of the machine ca. 13,00 t required space 3,3 x 1,7 x 2,9 m Klsdpfx Adsvut Rgswel ram adjustment 80 mm permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motoric ram adjustment, mechanical pincer feed type GF 160 can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1993, pressure 63 t stroke 10 - 80 mm no. of strokes 75 - 400 /min distance between columns 1080 / 920 mm dayligth (stroke and adjustment up) 450 mm column travel -side 300 mm table surface area 1000 x 550 mm hole in the table 700 x 160 mm table height over floor 1080 mm ram surface 900 x 450 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1,0 – 9999,9 mm power requirement 11,0 kW Klodpfxovut Ixs Adwel Weight 9,5 t dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250

Condition: used, machine/vehicle number: EF14E-00xxxx, Year of construction: 2004, operating hours: 3,884 h, fuel type: diesel, Please contact ATS Norway for more information Please provide reference number upon request: 22159 Specifications: 2004 model 3884 hours (will increase slightly) Kljdpfxoyagflo Adwel 42.3 kW Weight: 5050 kg Lifting height: 5450 mm Lifting capacity: 2750 kg Worn tires (see pictures) Recently serviced by owner Side shift Climate control Lights Radio Ready for delivery Description: We have a 2004 Mitsubishi FD30N forklift with side shift for sale. The truck functions as it should according to the owner. The hinges on one door are broken, but the door is included with the sale. Recently serviced. Ready for delivery. Hours: 3884 Own weight: 5050 Lifting heigth: 5450 Lifting capacity: 2750 Kw: 42,3 Model: FD30N

Year of construction: 2006, condition: excellent (used), functionality: fully functional, machine/vehicle number: 859178, Aerzen GM35S blower no. 859178, 2006 7.32 m3/min, Kjdpfx Ajvrhaqodwjll 12.70kW 1 bar 2006

Condition: repair required (used), functionality: limited functionality, Year of construction: 2002, operating hours: 6,850 h, Hubtex machine #54598 Battery year 2009 Ksdeya D Hyspfx Adwjll Will probably need at least partial replacement.

Condition: used, Year of construction: 2019, operating hours: 15,564 h, lifting height: 5,570 mm, free lift: 1,580 mm, fuel type: electric, mast type: triplex, fork length: 1,060 mm, fork width: 1,360 mm, total height: 2,460 mm, total length: 1,530 mm, total width: 1,500 mm, color: other, Empty weight: 6.500 kg Lifting capacity: 2.500 kg - Year: 2019 - Documentation available: Yes - └ Type Documentation: User manual Klsdpfx Adox U Ufkswsl - CE marking present: Yes - CE certificate present: No - Serial number: 46876 - Operating hours: 15564 - Lifting capacity: 2500kg - Lifting height: 5570mm - Overhead clearance: 2450mm - Free lift: 1580mm - Fork length: 1060mm - Maximum fork width: 1360mm - Minimum fork width: 290mm - Attachment: Side-shift, Vorkenspreider - Options: Nieuwe batterij, Half cabine, Werklampen, Vrije-heffing - Mast: Triplex - Drive: Electric - Brand/Type: 14/6 PzS 930 - Battery year of construction: 2025 - Capacity: 930Ah - Battery test result: 100% - Driving direction: 4 Road - Transport dimensions: 1530mm x 1500mm x 2460mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: excellent (used), functionality: fully functional, Equipment: double-sided, Additional equipment: Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Kedpoxwui Eefx Adwsll Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Minimum workpiece gap: 500 mm

Condition: excellent (used), CATALOG NUMBER 7556 Technical specifications: - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW Ksdpfjvyzn Rox Adwoll 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm - Weight: 3300 kg ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm Kodex Rq Nwspfx Adwjll - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6904 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 6 spindles: 1) Lower horizontal spindle 230 mm, 5.5 kW 2) Right vertical spindle 130 mm 3) Left vertical spindle 130 mm (spindle 2 and 3), 7.5 kW 4) Upper horizontal spindle 230 mm, 5.5 kW 5) Lower horizontal spindle 230 mm, 5.5 kW 6) Universal spindle 230 mm, adjustable 360°, 5.5 kW - All spindles adjustable up/down, right/left - Spindles 1, 2, 3, 4, and 5 equipped with electric brake - Spindle diameter: 40 mm - Upper infeed: 5 driven, toothed rollers - Upper outfeed: 4 driven, smooth rubber rollers (including 2 double rollers) - Lower feed: 1 driven rubber roller - Feeding via Cardan shafts - Rollers with pneumatic pressure adjustment Kjdpfx Asx Rq Iyodwell - Infinitely variable feed speed - Feed motor: 4 kW - Working pressure: 6–10 bar - Electric adjustment of planing thickness - Body lifting motor: approx. 0.55 kW - Central lubrication of the table - Infeed table length: 1970 mm - Extraction ports diameter: 2 x 140 mm, 4 x 135 mm - Dimensions (L x W x H): 4430 x 1830 x 2000 mm - Weight: approx. 3500 kg ADVANTAGES – German production, WEINIG brand – Equipped with 6 cutterheads – DTR technical documentation included – Universal spindle – Used planer, condition: very good Net price: 97,900 PLN Net price: 23,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)