Used Side Channel Blower for sale (21,764)

Condition: used, machine/vehicle number: YV2XZX0CXGA78xxxx, mileage: 5,20,000 km, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21758 Lodpfox Am Tysx Adwsrg Specifications: 2016 model Km: approx. 520,000 Euro 6 Wheelbase 490/137 cm 6x2 460 hp Carrier aggregate Refrigerator/freezer and heating 2 zone Full side opening Full air Retarder Tool cabinet Extra light Tires (see pictures) Lift Remote control Automatic AC/climate Radio Bed Delivery by appointment   Description: 2016 Volvo FM450 box truck 6x2 with full side opening and 2-zone unit. There is a refrigerator, freezer and heating on the unit. Delivery by arrangement. Km: 520000 HK: 459 Technical approved: Yes EU-approved until: 24.03.2026 Own weight: 13733

Condition: used, machine/vehicle number: WDB9630031004xxxx, mileage: 2,80,000 km, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21718 Specifications: 2016 model Mileage: approx. 280,000 18 pallets Euro 6 Wheelbase: 580 cm 4x2 354 hp Full air Engine brake Lodpfjxu Av Ujx Adwerg Tires (see pictures) Winter tires Thermo king unit Zepro lift Remote control Tool cabinet Compressor horn AC/climate Bed Radio Ready for delivery   Description: 2016 Mercedes Actros 1835 box truck with full side opening. New batteries were installed on the car this year. The lift may have some bolts that need to be replaced. Owner has some pillows that will come with it. Ready for delivery. Km: 280000 HK: 353 Technical approved: Yes EU-approved until: 22.01.2026 Own weight: 11540 Euro: 6 Model: Actros 1835 skapbil m/ Full sideåpning, aggregat, lift og 2 sett dekk Number of pallets: 18

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 6,604 h, load capacity: 4,000 kg, lifting height: 4,500 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,800 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 355/45-15, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠 Years of Experience | 🎨 In-house Service & Paint Shop | 💼 Professional Consulting | 🚚 Own Transport Fleet | 🤝 After-sales Support Looking for a forklift you can depend on? We are an established supplier of new and used forklifts with many years of industry experience. Our clients include companies across Europe – from small businesses to major industrial sites. For us, forklifts are not just machines – they are your assurance of smooth and reliable logistics operations. 🌟 What sets us apart? ✅ Every forklift undergoes a thorough technical inspection (servicing, testing, oil & filter replacement, refurbishment of essential components) ✅ Full safety certification (UDT) available on request ✅ In-house paint shop & workshop – machines reconditioned both technically and visually ✅ Pan-European transport with our own fleet and professional drivers ✅ Operator training at delivery + full on-site functional check ✅ After-sales support – we are here for you even after the purchase ✅ View and test machines at our headquarters – you are welcome! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing support – partnerships with leading leasing companies ✅ Invoice available in EUR or PLN – at your preference 🚀 Available now: COMBILIFT C4000 – 4-Way / Multidirectional Forklift 📅 Year of manufacture: 2011 ⏱ Hours worked: 6,604 h ⚡ Power source: LPG 💪 Load capacity: 4,000 kg 🎯 Mast: Duplex – 4,500 mm lift 🔩 Fork positioner: 1,200 mm | Forks: 1,200 mm 🛞 Superelastic tyres – 100% condition 🛠 Technical condition: Excellent – fully serviced ✨ Visual condition: Well-maintained, rust-free, ready to work 📐 Dimensions: Height: 2,400 mm Overall length: 2,400 mm Width: 2,250 mm Fork positioner width: 1,200 mm Overall height: 2,800 mm 🏭 Ideal for: Warehouses with narrow aisles Wood, steel & pipe industries Handling long loads Indoor and outdoor operation ✨ FT Logistics – Quality you can rely on. Service you can trust. ✨ Lrodpfsyatumox Adwog

Condition: used, machine/vehicle number: YV2R0P0C4EA76xxxx, mileage: 6,67,000 km, Year of construction: 2014, Please contact ATS Norway for more information Please provide reference number upon request: 22149 Specifications: EU approved until 14.08.2026 Mileage: 667,000 km Transmission: Automatic Webasto Exterior height: approx. 4 meters Refrigeration/freezer unit Bussbygg body from 2004 16-pallet box body Full side opening Full air suspension Good tires Trailer hitch VBG coupling Euro 6 – 751 hp Additional lights Tool box 6x2 2 bunks Radio/CD Climate control / AC Ready for delivery Description: 2014 Volvo FH750 6x2 box truck.Euro 6 engine with 751 hp.Body from 2004. 16-pallet box with full side opening. Ready for delivery. Ledsyagavepfx Adwjrg Km: 667000 HK: 750 Technical approved: Yes EU-approved until: 14.08.2026 Own weight: 13990 Total Weight: 28000 Payload: 13935 Width: 260 Length: 910 Euro: 6 Model: FH750 6x2 Skapbil m/ full sideåpning og kjøl/frys aggregat. Euro 6! SE VIDEO Gearbox: Automatic

Condition: used, mileage: 3,28,115 km, power: 338 kW (459.55 HP), first registration: 03/2018, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,260 mm, loading space length: 5,600 mm, loading space width: 2,390 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, navigation system, Three-way tipper Meiller with Bordmatic and sliding tarpaulin ABS, ASR, EBS Leaf suspension Reinforced engine brake 2x differential lock Dimensions and weights: Gross vehicle weight: 32,000 kg Unladen weight: 14,628 kg Payload: 17,372 kg Ljdsycn Dzepfx Adwjrg Loading area (L x W x H): 5,600 x 2,390 x 1,000 mm Wheelbase: 4,300 mm Towbar: trailer pre-equipment Aluminum tank: 400 l Cab equipment: Manually operated sliding roof, Electric windows, Electrically adjustable and heated exterior mirrors, Central locking, Storage box, 2 seats, Automatic climate control, Immobilizer, Radio with navigation system, Digital tachograph, Heated comfort driver seat Rear windows Exterior equipment: Sun visor, Fog lights, Warning lights (beacons): 2x Tyres: 1st axle: 315/80 R 22.5 2nd axle: 315/80 R 22.5 3rd axle: 315/80 R 22.5 4th axle: 315/80 R 22.5

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, operating hours: 20 h, load capacity: 3,000 kg, lifting height: 5,550 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,750 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 – 10.5, rear tire type: cushion tires (black), rear tire size: 22 x 10 x 16, overall weight: 9,500 kg, empty load weight: 6,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, adjustable boom, all wheel drive, fork extension, front guard, full service history, head guard, lighting, pallet forks, sideshift, COMBILIFT CB3000 – 2025 – 6 MTH – DIESEL – TRIPLEX 5,500 mm – FORK POSITIONER – SIDE SHIFT – FULL FREE LIFT 🟢 PURCHASE OR RENTAL AVAILABLE Used and new forklifts with quality guarantee – FT LOGISTICS 🔧 Ready for operation. No compromises. This COMBILIFT CB3000 is more than just a machine — it is the assurance that your logistics will run smoothly, reliably, and without downtime. Engineered for the toughest applications and after complete technical and visual reconditioning, this truck presents as new and is immediately ready for use. 🔍 Key technical details: 📅 Year of manufacture: 2025 ⏱ Operating hours (MTH): 6 ⛽ Drive: Diesel 🏋️ Rated capacity: 3,000 kg 📐 Mast: Triplex – 5,500 mm lifting height 🔄 Fork positioner: 1,750 mm | Forks: 1,200 mm 🛞 Tyres: Solid (100%) ✅ Condition: 5/5 – NEW 📏 Height: 2,250 mm | Length: 1,550 mm | Width: 1,500 mm 📦 Overall height: 2,450 mm 🛞 Tyres: Solid – Front axle 16 x 7 – 10.5 | Rear axle 22 x 10 x 16 ❄️🔥 Fully enclosed heated cab ⚖️ Machine weight: 6,500 kg 🎯 Load centre: 600 mm Lrjdpoyal E Refx Adwsg ⬆️ Free lift: 1,520 mm 🏭 Ideal for: - Narrow-aisle warehouses - Timber, steel, and pipe industry - Handling long loads - Indoor and outdoor operations

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls Lodpfxspkwaxj Adwerg two axes heads regulation spindles speed 6000 RPM electric adjustment of pressure beam feeder with cardan variable regulated feeder solid silenced cabinet

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width 910 mm upper combination unit lower combination unit two feed speeds belt oscillation electronic material thickness setting material thickness gauge Lredpoxt Dz Ajfx Adwsg Table with vacuum pump on the second unit Year of manufacture: 2009 New conveyor belts installed in 2023

Condition: used, We currently have the following blowers in stock: KLIMA CELJE 104CVX560, electric drive 75 kW; RVM 02/71-80, n = 3,000 rpm, electric drive; 2 x SPELLNA VRU-35.1-200-33HO,6, n = 2,910 rpm, electric drive 7.5 kW; VENTA MHI 31.5-50, n = 2,910 rpm, Pm = 7.5 kW; MHI 71, n = 1,450 rpm, electric drive 11 kW; 2 x WOODS plug-in blowers, n = 1,480 rpm. Ledpfxjw I Ef Hs Adwsrg

Condition: used, Planer and rabbeting machine Weinig Profimat 23 for four-sided planning and profiling of timber as construction timber, in excellent original condition and including planer heads (2 x 270 mm // 2 x 170 mm) spindle: 5 Lrsdpfxex Ttbnj Adwjg spindle 1: Bottom / 7.5 kW / 40 mm spindle 2: Right / 11 kW / 40 mm spindle 3: Left / common motor with right / 40 mm spindle 4: Top / 11 kW / 40 mm spindle 5: Bottom / 4 kW / 40 mm working width: 260 mm working height: 160 mm feed: 4 kW

Condition: new, Year of construction: 2026, Simply top - and practically as if by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Behind this is a sophisticated system that allows all production steps to be carried out with maximum precision at maximum speed. Perfect for all logs that are already milled and/or peeled and waiting for their final shape as posts, poles or palisades. Simply point - and practically by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Lrsdpfshm S Ruox Adwog Both models allow three process steps - coping, pointing and chamfering - to be carried out fully automatically at the same time. Without slowing down the production flow: For example, the single-length machine can handle up to 4,000 wood piles and more in single-shift operation. The powerful geared motors run up to top performance via frequency converters - for maximum speed in cutting and cycle time optimization. This has a particularly positive effect when handling different diameters: the processing speed can be easily adapted to the logs.

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min Lrjdpfx Ajwc U Nljdwsg distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m permitted for automatic mode according to the CE-Norm with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: good (used), functionality: fully functional, machine/vehicle number: -, Year of construction: 2017, operating hours: 8,578 h, load capacity: 6,000 kg, empty load weight: 9,670 kg, - annual service - service book fully documented Lrjdpfx Adsycc Eyswsg - forklift is in very good technical condition - visual defects due to wear

Condition: used, Year of construction: 1990, pressure 32 t distance between columns 680 / 550 mm stroke 8 - 50 mm Lrjdpfxjvuuf Sj Adwsg no. of strokes 85 - 500 Hub/min dayligth (stroke and adjustment up) 300 mm column travel -side 250 mm table surface area 620 x 450 mm hole in the table 450 x 110 mm table height over floor 915 mm ram surface 560 x 350 mm power requirement 7,5 kW weight of the machine ca. 5,60 t required space 3,6 x 1,65 x 2,8 m ram adjustment 50 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, pincer feed (ZR 18 D) can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1994, pressure 250 t Ledpfovuucwex Adworg distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1982, pressure 30 t stroke 8 - 40 mm no. of strokes 100 - 600 /min distance between columns 330 mm dayligth (stroke and adjustment up) 280 mm column travel -side 300 mm table surface area 540 x 470 mm hole in the table 315 x 110 mm table height over floor 1000 mm ram surface 250 mm Lredpfevuk Hrox Adwjg material width 120 mm material thickness - 3,0 mm feed length - 60 mm power requirement 5,5 kW Weight 2,6 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manuel ram adjustment, fix table, mechanical roll feed (Bruderer BBV 120/60) table surface 540 x 300 mm or 330 x 390 mm as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1983, pressure 160 t stroke fix 160 mm no. of strokes 30 - 120 /min Lredpfx Ajvuk E Usdweg distance between columns 1190 mm dayligth (stroke and adjustment up) 735 mm column travel -side 600 mm table surface area 1200 x 1000 mm hole in the table 500 x 300 mm table height over floor 900 mm ram surface 1000 x 800 mm ram adjustment 125 mm material width 550 mm material thickness 0 - 6,0 mm material cross-cut 1100 mm² feed length 350 mm power requirement 45,0 kW Weight 25,0 t dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, ram interlocking, centralized lubrication, mechanical pincer feed (Haulick, RS 350/550 SL 90) as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1996, pressure 63 t distance between columns 965 mm stroke 4 - 60 mm no. of strokes 30 - 800 Hub/min dayligth (stroke and adjustment up) 380 mm column travel -side 355 mm table surface area 960 x 640 mm hole in the table 850 x 140 mm Lredpfevut Rgex Adweg table height over floor 1150 mm ram surface 960 x 460 mm power requirement 32,5 kW weight of the machine ca. 13,00 t required space 3,3 x 1,7 x 2,9 m ram adjustment 80 mm permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motoric ram adjustment, mechanical pincer feed type GF 160 can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1993, pressure 63 t stroke 10 - 80 mm no. of strokes 75 - 400 /min distance between columns 1080 / 920 mm dayligth (stroke and adjustment up) 450 mm column travel -side 300 mm table surface area 1000 x 550 mm hole in the table 700 x 160 mm table height over floor 1080 mm ram surface 900 x 450 mm Ledpfjvut Ixsx Adwjrg ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1,0 – 9999,9 mm power requirement 11,0 kW Weight 9,5 t dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250

Condition: used, mileage: 1,16,000 km, power: 390 kW (530.25 HP), first registration: 09/2023, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, Equipment: ABS, air conditioning, all wheel drive, Arocs 2653 First registration: km 6X4 Retarder AHK 50mm Euro 6e Air conditioning Meiller tipper !!!!! BORDMATIK !!!!! 100 cm side walls approx. 12 m³ ---- German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/p?????/?????..... Roman We will be happy to arrange financing or leasing for you EU sale: net price upon presentation of company documents and VAT number VAT deposit €2,000 Our service for you: Lredpfoyc I Dujx Adweg - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich airport or Passau train station

Condition: used, mileage: 6,80,000 km, power: 368 kW (500.34 HP), first registration: 04/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 8x4, Equipment: crane, Iveco Trakker AD410T50 8x4 Front crane HMF 2320 Grab + rotator Remote control Year of manufacture: 2021 Meiller 3-way tipper Sidewalls foldable and swinging Lrjdpex Irg Eofx Adwsg Errors and omissions excepted!

Condition: used, machine/vehicle number: EF14E-00xxxx, Year of construction: 2004, operating hours: 3,884 h, fuel type: diesel, Please contact ATS Norway for more information Please provide reference number upon request: 22159 Specifications: 2004 model 3884 hours (will increase slightly) 42.3 kW Weight: 5050 kg Lifting height: 5450 mm Lifting capacity: 2750 kg Worn tires (see pictures) Recently serviced by owner Side shift Climate control Lights Radio Ready for delivery Description: Lrodpoyagflsfx Adwjg We have a 2004 Mitsubishi FD30N forklift with side shift for sale. The truck functions as it should according to the owner. The hinges on one door are broken, but the door is included with the sale. Recently serviced. Ready for delivery. Hours: 3884 Own weight: 5050 Lifting heigth: 5450 Lifting capacity: 2750 Kw: 42,3 Model: FD30N

Condition: used, Year of construction: 2019, operating hours: 15,564 h, lifting height: 5,570 mm, free lift: 1,580 mm, fuel type: electric, mast type: triplex, fork length: 1,060 mm, fork width: 1,360 mm, total height: 2,460 mm, total length: 1,530 mm, total width: 1,500 mm, color: other, Empty weight: 6.500 kg Lifting capacity: 2.500 kg - Year: 2019 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 46876 - Operating hours: 15564 - Lifting capacity: 2500kg - Lifting height: 5570mm - Overhead clearance: 2450mm - Free lift: 1580mm - Fork length: 1060mm - Maximum fork width: 1360mm - Minimum fork width: 290mm - Attachment: Side-shift, Vorkenspreider - Options: Nieuwe batterij, Half cabine, Werklampen, Vrije-heffing - Mast: Triplex - Drive: Electric - Brand/Type: 14/6 PzS 930 - Battery year of construction: 2025 - Capacity: 930Ah - Battery test result: 100% - Driving direction: 4 Road - Transport dimensions: 1530mm x 1500mm x 2460mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom Ledox U Ufkjpfx Adwjrg

Condition: excellent (used), CATALOG NUMBER 7556 Technical specifications: Lredpfx Asvyzn Rsdwog - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm - Weight: 3300 kg ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW Lsdpfxox Rq Nws Adwsrg - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)