Used Sinumerik 810 D for sale (9,662)

Condition: good (used), 1 used hardness tester Manufacturer: Mitutoyo Hnjdpfx Asxup Uwodwjg Model: Wizard 810 208 D Testing methods: Rockwell Brinell

Condition: ready for operation (used), Siemens control panel Sinumerik 8 MS421-D, used, normal signs of use, 100% functional, scope of delivery as per photos. Hnodpfexahlrsx Adwog

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card Hodpfxjwz Rifj Adwjng - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: ready for operation (used), Siemens 6FX1136-2BA01 SINUMERIK 810 MPC interface module, used, normal signs of use, 100% functional, scope of delivery as per photos Hnedpfx Adsxagp Newsg

Condition: ready for operation (used), Siemens 6FX1114-5AA00 Sinumerik 8 coupling to external PLC S5 E-Stand D ,used, small traces of use, 100% functional, scope of delivery according to photos Hsdpfei Ed Nmsx Adwsng

Condition: ready for operation (used), Siemens 6FC5110-0BA01-1AA0 Sinumerik NC CPU card 580 231 9101.01 E Stand D / 570 521 9101.00 E Stand A used 100% functional Hnjdpfx Adei Edx Sswog

Condition: good (used), CNC control, operator panel, LCD SIEMENS SINUMERIK 810 -Manufacturer: Siemens -Type: Sinumerik 810 M -Dimensions: 420/280/H350 mm Hodpfx Adsdpg T Rowong -Weight: 9.7 kg

Condition: ready for operation (used), Indramat DDS 2.1-W100-D Controller, SN:254678-10563, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. Hnedpfxox Etwge Adwsg

Condition: used, SIEMENS SINUMERIK 810D/840D OPERATING PANEL FRONT OP 010, 10.4" TFT (640 x 480) Version F Resolution: 640 x 480 pixels (VGA) Keyboard: Mechanical keys Compatible with: SINUMERIK 810D / 840D / + Hnsdpfx Adswtr Hiewsg Article number (Version F): 6FC5203-0AF01-0AA0 All information is provided without guarantee of accuracy or completeness.

Condition: used, A used demountable META shelf rack (6580x635x2500 mm) made of galvanized steel is a durable and versatile storage system in various environments, such as warehouses, garages or industrial areas. Hjdpfjw Sxvysx Adwong Galvanized steel offers excellent corrosion resistance, making the storage rack durable and suitable for various environments, including humid

Condition: used, PLC, control panel, operator panel, control machine -Handover in the current state (broken glass) -The device is sold as working -Manufacturer: SIEMENS -Type: Sinumerik 810D/840D PCU50 Hnodpsdpmmyefx Adwog -Dimensions: 482/310/H140 mm -Weight: 11.5 kg

Condition: excellent (used), Professional Harting hand crimping tool – model , dedicated for HAN D contacts. Used in industrial automation, electrical engineering, and low-voltage installations. • Wire range: 0.14 – 2.5 mm² (AWG 30–13) • Suitable for crimping contacts: HAN D 0.5 mm² and 1.0 mm² • Crimping force: 60–108N, depending on conductor diameter • Contact part numbers: 73300-200 and 73300-201 • Ergonomic handles, precise operation • Markings on the head: 0.14 / 1.0 / 1.5 / 2.5 mm² • Genuine industrial tool – Made in Germany Condition: very good – fully functional, ready for immediate use. Hnedpfx Adow Su Ncswog

Condition: excellent (used), CATALOG NO. 6916 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - 2 sanding units: Upper: steel roller + pad + steel roller Lower: steel roller + pad + steel roller From above: - Pressure roller, steel - Sanding unit - Sliding pressure roller, steel - Cleaning brush - Feed belt From below: - Feed belt - 2 smooth sliding steel rollers - Sanding unit - Pressure roller, steel - Cleaning brush - Discharge roller - Electrically adjustable sanding height - Pneumatic oscillation of sanding belts Hnodex Swtxjpfx Adweg - Infinitely variable feed speed regulation - Feed motor: 0.55 kW - Main motors: 2 x 4 kW - Air requirement: 6-8 bar - Extraction ports diameter: 3 x 80 mm, 1 x 120 mm - Overall dimensions (L/W/H): 1800 x 2070 x 2000 mm - Weight: 1422 kg – German manufacture, – unpainted – Very good condition, – used sander Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: good (used), D&K Europa System B2 Laminator The machine is 100% operational and ready to use. Hjdpfex N I Tqex Adwjng This advanced, high-performance machine is ideal for commercial laminating. Technical specifications: Max sheet size: 540mm x 740mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Max weight: 400 gsm Operating temperature: 80-145°C Weight: 750 kg 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Sheet feeding accuracy: ±2.0mm. Touchpad for easy operation. Sheet straightening module. Sheet discharge jogger.

Condition: good (used), Thermoplastic polyurethane elastomers, pressure hose, air hose, plastic hose Hnsdpfx Asd Dv Raodweg -Hose: PA/TPU/D inner diameter = 14 -Inner diameter: 14 mm -Outer diameter: 16 mm -Wall thickness: 1 mm -Length: 98 m -Quantity: 1 roll available -Dimensions: 800/800/H535 mm -Weight: 36 kg

Condition: used, functionality: fully functional, For Sale: Riventing Machine NE211 022 Condition: used, functional, Hnsdpfsx Tfknex Adwsg Testing: Available at seller’s location Location: Autoliv Poland Sp. z o.o., ul. Belgijska 2, Jelcz-Laskowice, Poland We invite you to visit our facility where the machine is currently stored. Agreed price should include logistics cost on customer side. Two pieces available

Condition: used, maximum load weight: 31,540 kg, overall weight: 38,500 kg, axle configuration: 3 axles, first registration: 05/2005, next inspection (TÜV): 05/2005, loading space volume: 30 m³, total width: 2,490 mm, total height: 3,700 mm, Equipment: ABS, According to our “General Terms and Conditions”, and without any warranty or guarantee, we are pleased to offer you the following vehicle on a non-binding basis and subject to prior sale, errors, and typographical mistakes: VMA Kesteren / D-TEC Slurry Tanker with ADR ( Vehicle 19 ) First registration: 17.05.2005 Vlastuin / Kesteren / D-TEC Model FV2006 with ADR Gross vehicle weight: 38,500 kg Unladen weight: 6,960 kg Payload: 31,530 kg Volume: 29,500 liters TÜV (inspection) valid until 01/2026, SP test until 07/2026 Total length: 10,050 mm Total width: 2,490 mm Total height: 3,700 mm Drop-down supports 1st axle is a lift axle Hnodpfxsx Uu Ske Adwog Tyres: 385/65R22.5 (1st: approx. 70/30%, 2nd: approx. 70/70%, 3rd: approx. 50/40%) 1st axle steered, 3rd axle trailing steering BPW axles Single chamber, one baffle wall 1 x inlet, 1 x outlet 2 x wheel chocks 1 pair of LED work lights on the rear hose compartments, 2 x at the rear top, 2 x at the front Vogelsang pump Hose racks left and right along the trailer Sight glass / level gauge on the driver's side, in the middle Load pressure gauge Air suspension with lifting and lowering Central lubrication Access ladder front left (driver’s side) Price: €29,500.00 (net) All details without guarantee or warranty. Our “General Terms and Conditions” apply. Place of jurisdiction for claims up to €50,000.00 is the district court of Ludwigslust, for values exceeding this, the regional court of Schwerin. Subject to errors, typographical mistakes, and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: MIKA245, Technical data: 1x Demag D-AW180 wall-mounted jib crane, rated load 500 kg, with Demag chain hoist 500 kg Load capacity at full outreach: 500 kg / 0.5 t Outreach: 4.5 m Total weight approx. 300 kg incl. wall bracket Hnodpfxsx U N U Ts Adwjg Incl. Demag chain hoist NL 500 kg Slewing range 180°, connection to 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, load capacities 80–5000 kg, please inquire See pictures Shipping via freight forwarder or collection by appointment only

Condition: new, 3D grid table 2000 x 1000 x 200 mm, 100 mm pitch, plate thickness 22 mm, hole diameter 28 mm. Machined flat, very robust, weight approx. 750 kg. Supplied with table leg suitable for all standard accessories with 28 mm. Price is without accessories. Additional charge of €500 for a set with half the pictured quantity. Hnodpovlli Ajfx Adweg

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Very good condition, ready to operate. Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Stack height: 100mm Machine weight: 1000kg Power supply: 380V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Hsdpfx Adex N D Tasweng Air table Photocells Intuitive operation Documentation, tools, spare blade, and a safety blade change tool.

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor -Square D basic module: PD 3.01 E Hsdpfsd Spi Rjx Adwsng -Class: 8502 -Price: per piece -Quantity: 17 pieces -Dimensions: 88/49/H75 mm -Weight: 0.4 kg/piece

Condition: used, maximum load weight: 34,079 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 07/2013, next inspection (TÜV): 09/2026, loading space length: 10,750 mm, loading space width: 2,470 mm, loading space volume: 30 m³, total width: 2,470 mm, total height: 3,500 mm, Equipment: ABS, According to our "General and Supplementary Terms and Conditions"—without any guarantee or warranty—we are able to offer you the following vehicle today, subject to prior sale, errors, and typing mistakes, and without obligation until the contract is concluded: Hodpfx Aex Tbxuodweng Vlastuin/ Detec Slurry Tanker Trailer (Vehicle 49) First registration: 22.07.2013 Manufacturer: Vlastuin Rolling/Equipment/D-TEC Gross permitted weight: 41,000 kg Unladen weight: 6,921 kg Payload: 34,079 kg Volume: 30,000 litres Roadworthiness test (TÜV): 09/2026, Safety inspection (SP): 03/2026 Overall length: 10,750 mm Overall width: 2,470 mm Overall height: 3,500 mm Support legs 1st axle: Lift axle Tyres: 385/65R22.5, 1st axle approx. 50/50%, 2nd and 3rd axles approx. 40% 3rd axle: steering axle VALX axles 1 chamber, 1 baffle plate 1 inlet, 1 outlet Level indicator/sight glass on driver’s side, first third 2 wheel chocks 1 pair of LED work lights on the front underrun guard, 1 pair on hose holders, 2 at rear top, 2 reverse lights Börger pump FL 1036 (manufactured 2013) Hose storage left and right along the trailer Load pressure gauge Price: €32,500 (net) All information is provided without any guarantee or warranty. Our "General and Supplementary Terms and Conditions" apply. Place of jurisdiction for both parties up to a disputed value of €50,000 is the District Court of Ludwigslust, above this amount the Regional Court of Schwerin. Subject to prior sale, errors and omissions excepted.

Condition: new, Year of construction: 2025, 3D hole table 2000 x 1000 x 200mm, 100mm grid, plate thickness 22mm, hole diameter 28mm, precision-machined, very solid, weight approx. 750 kg. Includes table base suitable for all standard accessories with 28mm. Price is without accessories, accessories as shown special price €250. Hsdew H Abkepfx Adwjng Plasma nitriding €800 extra (impact-resistant, scratch-resistant, stainless). Shipping within Germany €250.

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Hnsdpfjx Hqmnsx Adwog Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: new, 3D perforated table 2400 x 1200 x 200mm, grid 100mm, plate thickness 20mm, hole diameter 28mm, Plan machined, very solid weight approx. 950 kg With table base Price is without accessories Hedpfx Adovm Dk Iewjng