Used Slide Sanding for sale (9,814)

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Podpow A Ng Eefx Ab Ierd Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Roller configuration: Machine 1 – Bottom sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 The machine is assembled and can be tested.

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 min/max. pitch cone length 200 - mm Podpfx Aoxcg Hmjb Ijrd total power requirement 13,4 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m

Condition: used, color: other, Empty weight: 2 kg Pjdpfsnkcfmsx Ab Ierd Working condition. No guarantee. More available. Please contact us if you can't find what you are looking for.

Condition: used, New: No Empty weight: 2 kg Psdpfxonnz Ecj Ab Ierd Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, color: other, Empty weight: 2 kg Podpfxsnkcf Re Ab Ierd Working condition. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, color: other, Empty weight: 2 kg Prsdpfonkcggsx Ab Ied Working condition. No guarantee. More available. Please contact us if you can't find what you are looking for.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, feed rate X-axis: 25 m/min, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Predpfoxw U Eajx Ab Ied Operating Unit 1 Unit: combined roller/pad Roller material: rubber Operating Unit 2 Unit: vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Work table with fixed height Working level Feed belt

Condition: used, Year of construction: 1989, functionality: fully functional, The digital stand control-unit visible in the pictures and video is not included (it is visible because it is interchangeable between machines). The machine operates with its own controller. Psdpfx Absxz Awrj Ierd

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch Pjdpswyda Usfx Ab Isrd sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: used, Year of construction: 1998, Belt sanding unit for machining the side surfaces of workpieces with a pneumatic belt tensioner. Technical specifications: Belt sanding unit: - Tilting device from -1° to +15° - Belt size 2500 x 100 mm - Cutting speed 18/36 m/s - Motor 3.7/4.4 kW - With protective cover and 120 mm diameter connection for hose attachment to dust extraction system - Two-roller system for slack belt sanding. Roller diameter 75 mm, axle distance adjustable from 225 to 320 mm - Swiveling horizontal slide, travel 130 / 220 mm, operated via handwheel - Solid mounting bracket for sanding unit - Feed unit, pneumatically controlled, travel 5 - 20 mm Table unit: Prjdpsxqqczefx Ab Ijd - Linear workpiece carrier table with automatic feed, travel 700 mm, clamping surface 300 x 250 mm, working speed from 15 - 150 mm/s, working stroke freely programmable by automation - Cable drag chain for cable duct, for electrical wiring and pneumatic hose - Clamping of workpieces via spring, unclamping via pneumatic cylinder

Condition: reconditioned (used), Year of construction: 2021, Belt Grinding Machine Manufacturer: REMA Model: BS 75 Column-type Design Year of Manufacture: 2021 – workshop-tested Description: - Flat grinding table usable both horizontally and vertically - Extremely robust and durable machine construction - High-quality components designed for continuous industrial operation - High safety standards with CE certification - Numerous customization options - Simple and quick belt change Pedpfx Aoxy Rfhob Iord Technical data: - Belt dimension: 950 x 100 mm - Motor power: 0.55/0.7 kW - Motor speed: 1,450/2,900 rpm - Cutting speed: 8/16 m/s - Worktable size: 225 x 120 mm - Mitre table size: 110 x 120 mm - Belt guard housing made of steel - Extraction port Ø 75 mm - Dimensions: 380 x 410 x H 1,209 mm - Weight: 70 kg Used as seen, without warranty. The machine is technically in line with the standards of its year of manufacture.

Condition: used, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec Predpsxzi S Nofx Ab Ijd 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Location: Supplier

Year of construction: 1990, condition: excellent (used), O F F E R Subject to prior sale and errors excepted, we can offer you, without obligation, the following ex-stock: D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Model: T Year of manufacture: 1990 _____ Grinding carriage center height: approx. 200 mm Grinding wheel Ø x bore: 200 x 30 mm Grinding wheel speed: approx. rpm Grinding wheel drive power: approx. kW Workpiece headstock center height: 160 mm Workpiece headstock longitudinal adjustment: approx. 100 mm Workpiece headstock transverse adjustment: approx. 200 mm Workpiece headstock swiveling either side: approx. 2 x 30° Collet chuck capacity: 0.5 – 20 mm Weight: approx. 500 kg Accessories / Special equipment: • Workpiece headstock swiveling for pointing and deburring • Collet chuck with approx. 10 different collets • Plexiglass safety guard for grinding wheel Prjdexzuuvspfx Ab Iod • Compact, free-standing on sturdy base • Optional cross-slide feed unit Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further tool grinding machines available from stock – please enquire!

Condition: used, Year of construction: 1989, functionality: fully functional, The digital stand control-unit visible in the pictures and video is not included (it is visible because it is interchangeable between machines). The machine operates with its own controller. Predpfx Aexz Arvob Ied

Condition: new, Used machine Year of manufacture: 1988 Condition: well-maintained Technical specifications: - Length of work tables: 1440 mm - Total width of both work tables: 710 mm - Work table tilt adjustment: 0 – 30 degrees Predoxzl Aqopfx Ab Ijd - Working pressure: 6 bar - Sanding belt length: 2170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10 – 20 m/sec - Vertical adjustment of oscillating unit: 125 mm - Weight: 490 kg - Air consumption: 25 NL/min - Electrical: 400 V / 2.9 kW Availability: short-term Storage location: Baden-Württemberg

Condition: used, Year of construction: 1991, functionality: fully functional, total width: 2,000 mm, total height: 2,150 mm, total length: 2,450 mm, overall weight: 4,200 kg, power: 25 kW (33.99 HP), input voltage: 380 V, control type: manual, degree of automation: manual, actuation type: electric, Number of sanding units: 4 pcs Sanding width: 190 mm Lsdm U H Nfet Tqy Eofjrw Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single Wood Sanding Machine Pedpfxexzbdks Ab Ijrd Ø Sanding from below/above Ø With 2 offset sanding units each (below and above) Ø Sanding units (below and above) arranged in series according to the planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finishing) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units Ø Oscillating use of sanding belts (during the sanding process) Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums Ø Oxide-ceramic sanding shoe for: - precise surface geometry - no need for readjustment - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping. Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load. The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon. Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation. Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts. Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment. Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt. The Feeding mats have been recently changed

Condition: used, Year of construction: 1999, operating hours: 15,153 h, CE mark: yes Serial number: yh01-0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21909 Specifications: Psdpfx Aexz Nz Deb Ijrd 1999 model 15153 Hours 62.5 kW 14600 kg Cut Additional hydraulics Chassis (see pictures) Sweating a little bit on the front cylinder Track steering Sanding bucket Excavator bucket Missing a cover (see pictures) Errors and shortcomings occur Small hydraulic leak that they can't figure out Climate Light Radio Ready for delivery Description: We have a 1999 Kobelco sk135SRLC w/ sanding bucket and digging bucket for sale. There is a small hydraulic leak that the owner cannot figure out. It is crawling faster on one track than the other. The owner does not know if this is related to the leak or if the belt motor needs to be replaced. It also sweats on one of the lift cylinders. Other than that, the machine works as it should, according to the owner. But errors and shortcomings exist. And some cost must be taken into account. Ready for delivery Hours: 15153 Own weight: 14600 Kw: 62.5 CE: Yes Model: sk135SRLC m/ pusseskuffe og graveskuffe

Condition: good (used), Year of construction: 2004, gross working tank volume: 350 liters useful volume: 170 liters largest possible workpiece dimension (measured diagonally): 220mm total weight: 731kg drive power at 1500 rpm: 2,6kW Prsdpfxot E R Rho Ab Iod

Condition: ready for operation (used), Year of construction: 2010, I sell edge sanding machine with milling head STEMAS. 1 pc. Milling head manual adjustable 3 pc. Edge sanding heads tiltable Automatic feeding Return band conveyor for elements Spare sanding bands included. Prodpfoxznq Dsx Ab Ijd Available immediately.

Year of construction: 2022, condition: used, Number of sanding units 4 st. sanding width , mm Sanding height max. , mm weight 2200 kg Ecoline QSAND 6 RIF. 210032 For sale on behalf of a customer Can be viewed in operation until 12/19/2025 ----- Long text as PDF attachment! Brief description: The machine has automatic height detection for the pass-through. It has 2 sanding discs at the top and 2 sanding discs at the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal sander for scantlings and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, Q-Sand guarantees maximum precision and uniformity. It is equipped with sanding discs, lamellar brushes, and a double disc for more effective material removal, which improves adhesion for subsequent treatments. Q-Sand can be installed in a line or, thanks to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Price of the above machine on request! Podpfx Aboxyafko Iord ----- (Technical data according to manufacturer - without guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: used, Year of construction: 2015, operating hours: 6,175 h, CE mark: yes Serial number: 3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21416 Specifications: 2015 model 6175 (want a little) Gets certified before sale 7620 kg 50.7 kW Machine width: 322 cm Cut Chassis (see pictures) Additional hydraulics Central lubrication S50 attachment Tiltrotator Sanding bucket Narrow drawer Excavator bucket Light Air conditioning/ac Radio Delivery by appointment   Description: We have a 2015 Komatsu PC78us Excavator w/ Rototilt, sanding bucket, narrow bucket and digging bucket for sale. The machine functions as it should and is certified before sale. Services and maintenance have been taken on a continuous basis. Ready for delivery Hours: 6175 Podjxf Tdkepfx Ab Ijrd Own weight: 7620 CE: Yes Model: PC78us Gravemaskin m/ Rototilt, pusseskuffe, smalskuffe og graveskuffe

Condition: good (used), Year of construction: 2010, functionality: fully functional, new container with completely new layer PU-cover with ca. 6mm cover thickness Prodpfjt Ahqyex Ab Iod usable volume: 165 liter trough inner measures: 1100mm x 460mm x 525mm empty weight: ca. 850kg motor speed: 1500 rpm sound insulating cabinet extern dimensions: 1900mm x 1250mm x 1550mm band filter device Seitz

Condition: used, Year of construction: 2025, operating hours: 920 h, Serial number: 3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21868 Specifications: 2025 model 920 hours (I want to know a little) 23985 kg Predexy Ex Ajpfx Ab Iod Certified to: 12/25 Chassis: good Track guides Central lubrication Auxiliary hydraulics Excavator bucket Sanding bucket Tiltrotator GPS S70 attachment Air conditioning/ac Light Service history Ready for delivery Description: We have a 2025 Volvo ECR235 EL excavator with digging bucket, sanding bucket, tiltrotator and GPS for sale. The machine functions as it should and is in good condition. All services have been carried out by Volvo. The machine is in daily operation and the number of hours will increase slightly. Ready for delivery Hours: 920 Own weight: 23985 Model: ECR235 EL gravemaskin m/ graveskuffe, pusseskuffe, rototilt og gps

Condition: used, Year of construction: 2024, operating hours: 1,188 h, Serial number: 31xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21869 Specifications: 2024 model Certified until 12/25 Hours: 1188 Weight: 36800 kg Central lubrication Auxiliary hydraulics Chassis (good condition) S70 attachment Dental tray Sanding bucket Tiltrotator GPS Track guides Hammer glass (front window) Standard windshield included Prodpfx Aexy Expob Iod Compressor with air hose in front of the cabin Light Service history Air conditioning/ac Radio Ready for delivery   Description: We have a 2024 Volvo EC300el excavator w/ Toothed Bucket, Sanding Bucket, Rototilt and GPS for sale. The machine is functioning as it should and is in weekly operation so the number of hours will increase slightly. All services have been performed by Volvo. The machine appears to be in good condition. Ready for delivery Hours: 1188 Own weight: 36800 Year controlled: Yes Year controlled until: 12/25 Model: EC300el gravemaskin m/ Tannskuffe, Pusseskuffe, Rototilt og Gps

Condition: used, Year of construction: 2023, Field of application: Construction Pedpfx Abjxxpx Dj Ijrd Please contact ATS Norway for more information Please provide reference number upon request: 21827 Specifications: - 2023 model - Volvo - Owner says it may have been used 3 hours - Delivery by appointment