Used Slide Sanding for sale (9,900)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 155 mm, cutting width (max.): 1,350 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 1,000 rpm, total length: 3,300 mm, total width: 1,985 mm, total height: 1,510 mm, overall weight: 1,100 kg, table height: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, • Smooth-running saw blade • Cutting width 1350 mm • Precisely operating crosscut table, length 3.3 m • Easy-to-use parallel guide • 7'' touchscreen control panel • Modern SynchroDrive drive technology • Handwheel for positioning the parallel guide • Guide plate holder • Electronic preparation for retrofitting a scoring unit • Standard cross table for length stop for miter cuts up to approximately ± 47° • Table extension at the rear 700 x 855 mm – standard • Weight approximately 1,100 – 1,400 kg Hsdezvdwpjpfx Anyot

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. - Manual adjustment for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A - Level monitoring for component A + B - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A Hodpfx Anszgck Njyot - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Note: The potting system is located at our site in Austria.

Condition: good (used), Year of construction: 1974, KAMRO FK Panel and Rip Saw Hjdpfxozrtwqe Anyet Panel saw with extensive accessories Year of manufacture: 1974 Saw blade, max. diameter: 400 mm (currently fitted with a 300 mm saw blade) Rip fence length: 3000 mm Cutting height, max.: 50-125 mm Table size: 1180 x 670 mm Table extension: 1000 x 300 mm Table extension width: 700 x 565 mm Drive (kW/HP): 4.0/5.5 Saw spindle speed: 4000/5000/6500 rpm Weight: 800 kg

Condition: used, Year of construction: 2021, functionality: fully functional, power: 14 kW (19.03 HP), input voltage: 400 V, input current: 36 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, cutting width (max.): 3,200 mm, overall weight: 4,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, We offer this used Felder kappa automatic 80 sliding table saw. Machine can be very fast in production if presented with an equally fast operator. The cuts are perfect, 90 degree angle is easy to adjust (and should be done regularly). We also offer all of the saw blades as well as undercutters we have to it. Model: kappa automatic 80 Voltage: 400 V Phases: 3 Frequency: 50 Hz Current: 36 A Power: 14.0 kW Hedjy Dda Aepfx Anyot Year of construction: 2021 year Weight: 4200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 1994, condition: used, Second-hand machine Year of manufacture: 1994 Hsdjzk Nucjpfx Anyot Features and technical specifications: Working width: 300 mm Sanding belt oscillation: mechanical Roller guide: rubber-coated Grinding unit: with grinding shoe Feed speed: 2-speed Feed direction: reversible (forward/reverse) Motor start-up: star-delta Mains connection: 380 V Weight: approx. 450 kg Availability: at short notice Location: Baden-Württemberg

Condition: used, Year of construction: 2004, Slider length: 3400 mm Cutting width at the rip fence: 1300 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Hsdpfszqyxxex Anyst Crosscut scale display: scale Crosscut scale with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Dust extraction connection: 80 and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm Hsdpszuzbcefx Anyjt PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Hsdpfx Anozhm Dpoyst Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Crosscut fence with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 2011, Slider length: 3000 mm Cutting width with fence: 1000 mm Cutting width with rip fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Fence adjustment: electric / position control Rip fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Fence display: digital display Rip guide display: scale Rip guide with miter function: yes Saw blade diameter: 450 mm Hedpfx Aozdza Dsnyst Speeds: Vario Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 1996, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - CE certificate present: No - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hjdpfownh Eqox Anyet Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), axle configuration: 2 axles, first registration: 04/1988, loading space length: 12,700 mm, total length: 12,950 mm, suspension: steel, color: blue, Year of construction: 1988, Axle brand: ROR Hedpfxsw T Ru Do Anyst Brakes: Drum brakes Suspension: Leaf suspension Unladen weight: 6,990 kg Payload: 25,010 kg Gross vehicle weight: 32,000 kg Technical condition: very good Visual condition: very good Contact Thierry Leemans for further information.

Condition: excellent (used), Robland Z320 panel saw 320 cm carriage, 0-45 degree tilt, and manual height adjustment of the saw blade right-hand fence adjustable manually up to 1370 mm, 0.75 kW scoring saw, Hjdpfozu Iz Nex Anyst 5.5 kW motor max. blade diameter 400 mm. 3 cutting speeds Very good condition, ready for work.

Condition: used, Year of construction: 1999, functionality: fully functional, Eima Type 120 double-blade cutting saw Minimum/maximum cutting width: 210-2500 mm Cutting depth: 2500 mm Maximum blade diameter: 400 mm Hsdpfozwktaex Anyst Cutting height: ~100 mm Total power: 7 kW Electronic width-of-cut adjustment

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal Hedpezuzb Ajfx Anyjt 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, axle configuration: 3 axles, first registration: 06/2013, total length: 13,950 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,010 mm, Year of construction: 2013, Equipment: ABS, = Additional options and accessories = - Air suspension - Disc brakes = Further information = Hsdpezxgpgefx Anyet Axle configuration Tire size: 385/65 R 22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 2: Tire tread depth left: 25%; Tire tread depth right: 25% Rear axle 3: Tire tread depth left: 20%; Tire tread depth right: 20% Weights Unladen weight: 6,817 kg Payload: 35,183 kg GVW: 42,000 kg Functional features Loading platform height: 115 cm Sunroof: Yes Condition Damage: None Identification License plate: OL-46-YY

Condition: used, Year of construction: 1982, total length: 2,700 mm, total width: 2,220 mm, total height: 1,500 mm, Colour: Green Weight: 900 kg - Year: 1982 - Documentation available: No - CE certificate present: No - Serial number: V024400 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 100 - Parallel stop displacement [mm]: 1500 - Roller table length [mm]: 2500 - Table width [mm]: 1940 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 140 - Controlled axes: Tiltable, Scoring unit height, Cutting height Hedpfjwnh S Dex Anyst - Manually adjustable axes: Tiltable, Scoring unit height, Rip fence, Cutting height - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - Spindle speed: Manual - └ Min. spindle speed [rpm]: 4000 - └ Max. spindle speed [rpm]: 5500 - └ Spindle speed control: Not applicable - Schuinstelbare zaagaggregaat: - └ Max. adjustable [°]: 45 - Voltage [V]: 380 - Current consumption [A]: 11 - Fuse [A]: 16 - Power [kW]: 7.5 - Transport dimensions: 2700mm x 2220mm x 1500mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1996, grinding width: 1,350 mm, power: 42 kW (57.10 HP), COSTA 71 CTT 1350 wide belt sanding machine, manufactured in 1996. Hodpeznvp Ijfx Anyst Configuration: 1 hard rubber sanding roller. 1 electronic segmented sanding pad. Air blow-off system. Working width: 1,350 mm. Pneumatic (compressed air) cleaning system for all units. Vacuum worktable with integrated fan. Construction: Designed for use in a production line with a fixed working height; the sanding units move while the workpiece remains at a constant level. 2 motors, total power: 42 kW.

Condition: excellent (used), Catalog number: 8075 TECHNICAL DATA - Table length: 2200mm - Table width: 700mm - Main motor: 2.2kW Hedozuk Huepfx Anyot - Manual beam lifting - Abrasive belt width: 160mm - Grinding head - Dust extraction nozzle diameter: 120mm - Overall dimensions (L/W/H): 3060x1240x1430mm - Weight: 250kg ADVANTAGES – Made in Austria – Unpainted – Used sander, very good condition Net price: 6500 PLN Net price: 1548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), 4 kW motor Roller feed system Sanding belt length: 100 cm Working height: 14 cm Table with adjustable angle and height Hedpfx Anszu Ng Tsyjt

Condition: used, Year of construction: 1996, Sledge length: 2800 mm Cutting width at the rip fence: 1050 mm Cutting width at the crosscut fence: 2800 mm Cutting depth: 145 mm Scoring saw: no Saw blade height adjustment: manual / hydraulic Saw blade swivel adjustment: manual / hydraulic Rip fence adjustment: manual Saw blade angle display: Digital Cutting height display: - Rip fence display: Scale Crosscut fence display: Scale Saw blade diameter: Speeds: 4 Motor power: 5.5 kW Motor brake: yes Hedpezqyx Esfx Anyet Dust extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 1000 kg

Condition: used, axle configuration: 3 axles, first registration: 11/2005, loading space length: 13,600 mm, loading space width: 2,490 mm, loading space height: 2,770 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 7580 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2005, Side wall material: Tarpaulin, Sliding roof, Axle type: BPW, HARD WOOD FLOOR // HARDWOOD FLOOR = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Axle 3: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Weights Unladen weight: 7,580 kg Payload: 31,420 kg GVW: 39,000 kg Functional Loading platform height: 124 cm Sliding roof: Yes Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Hjdpfezwc Amjx Anyjt Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Equipment: saw blade guard, scorer, Used panel saw Manufacturer: Altendorf Type: F45 Year of manufacture: 2010 Cutting length 3200mm. Cutting width 1300mm Maximum cutting height 130mm (saw blade diameter 500mm) Saw blade and scoring saw swivel 0-45° digitally adjustable Saw blade and scoring saw height adjustment digital Parallel fence manually adjustable Hjdpfx Asztwvaenyst Double roller carriage, safety guard Switching on the main saw blade and scoring saw from the control panel and/or the machine table Main motor, panel saw 5.5KW (7.5 HP) (adjustable at 3500/4500/5500 rpm) Scoring saw motor, panel saw Duplex miter fence

Condition: used, axle configuration: 3 axles, first registration: 11/2005, loading space length: 13,600 mm, loading space width: 2,490 mm, loading space height: 2,780 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 7580 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2005, Side wall material: Tarpaulin, Sliding roof, HARD WOOD FLOOR // HARDHOUTEN VLOER = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 3 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 6 mm Axle 3: Tire tread depth left: 9 mm; Tire tread depth right: 3 mm Weights Tare weight: 7,580 kg Payload: 31,420 kg GVW: 39,000 kg Functional Loading height: 124 cm Sliding roof: Yes Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Hedpfxjzwc Age Anyet Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Hjdpszuzctjfx Anyjt Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S

Condition: used, Year of construction: 2006, functionality: unexamined, SANDING LINE COMPOSED OF 3 MACHINES: LOWER WITH TWO PAD BELTS; UPPER WITH TWO PAD BELTS; LATERAL WITH ONE BELT AND TWO EDGE SANDING BELTS. FOR BEAMS UP TO 800x300 mm. INCLUDING INFEED AND OUTFEED ROLLER CONVEYORS. TOTAL POWER 34 kW. Hodpfew E Eu Rox Anyst