Used Manual Devices for sale (24,155)

Condition: good (used), Year of construction: 2008, Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device Fjdsipapijpfx Aa Eogi -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg

Condition: used, Year of construction: 1972, Hand clamps / clamping devices for band saw blades Meinert PH6D immediately available – fully functional Location: Austria, near St. Pölten Fgjdpfx Aajzl N N As Eoi

Condition: good (used), Offer 25475 Manual double unwind/rewind reel Technical data: - Coil weight, left + right, up to approx. 1 t - Coil width, each side, up to approx. 300 mm - Coil inner diameter, approx. 380 to 500 mm - Coil outer diameter, up to approx. 1250 mm Fgjdpfx Aaezkhbno Eji - Arbor height, approx. 750 mm - Space requirement, approx. W 1250 x D 900 x H 1300 mm - Weight, approx. 200 kg

Condition: new, Manual mini punch grinding device for cutting punches, ejector pins, sleeves, and other rod-shaped parts. Suitable for grinding round profiles on surface or tool grinding machines. For workpieces up to max. Ø 10 mm and lengths up to max. 300 mm. Roundness accuracy 5 µm. Weight 3.5 kg. Fgodpfxoymyqbs Aa Esi

Condition: new, -Dimensions (A x B x C): 1610 x 1272 x 1392 mm -Max. dough piece weight: 700 g -Number of compartments: 31 -Part No.: 7309535 -Ball capacity per compartment: 8 -Total ball capacity: 248 -Power: 0.37 kW -Voltage: 400 V Fodpoxv R Rcefx Aa Eogi -Frequency: 50 Hz - 1.06 A -Weight: 380 kg The RP manual intermediate prover is a resting chamber for dough, loaded and unloaded manually, which allows the dough to relax for the necessary time after dividing and before final shaping. During resting time in the RP manual chamber, the dough balls ferment gently and gain some volume, which enables them to become more supple and easier to shape. This chamber is specially designed for artisan bakers who want to optimally preserve their dough’s quality. Standard baskets can hold pieces up to 650 g. Optional germicidal treatment available for enhanced hygiene. DURABILITY: -Painted steel frame provides great rigidity to the chamber. An oversized chain is used for the 'large wheel' of the proving nests to extend the service life of the chamber. -Smooth gear operation ensures extremely quiet machine performance. VERSATILITY: -Equipped with electrical sockets for a moulder and divider, allowing for integrated workflows. -Manual left/right control button available, with a highly ergonomic hands-free control option. HYGIENE: -Proving nests made from polyester to prevent moisture buildup. Iedcvyqoxv R Rcsi Aobd -Optional integration of a germicidal lamp. The listing was translated automatically. Translation errors are possible.

Condition: new, Year of construction: 2026, turning height: 2,400 mm, rotary table diameter: 2,500 mm, table load: 30,000 kg, table diameter: 2,500 mm, warranty duration: 12 months, table speed: 112 mm/min, NEW 2026 – REM SCR 27 Manual Vertical Turret Lathe | Ø2,500mm | Made to Order Cost-effective, reliable manual VTL purpose-built for workshops needing robust large-diameter turning without the complexity and cost of CNC systems. WHY CHOOSE REM SCR 27? ✔ New 2026 – manufactured to order, fully customizable ✔ Zero gearboxes = lower maintenance, higher reliability ✔ No CNC needed — Digital Read-Out on all axes for precision ✔ No expensive programmer or specialist required ✔ Easy to operate, easy to learn, easy to service Fgsdpfxe Ai D T Ho Aa Eji ✔ Unbeatable price-to-capacity ratio TECHNICAL SPECIFICATIONS: • Faceplate Diameter: 2,500 mm • Max. Turning Diameter: 2,500 mm + up to 300 mm • Machining Height: 2,400 mm • Max. Workpiece Weight: 30 tonnes • Control: Conventional with full Digital Read-Out (DRO) per axis Made to order — can be customized to your specific requirements. IDEAL FOR: Central & Eastern Europe | Middle East | Latin America | Growing Production Shops Manufactured by REM Bacau – Romania | 60+ years of VTL expertise. Contact us for pricing, lead time, and full technical specifications.

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Fedpfxjz Slkpe Aa Ejgi

Year of construction: 1998, condition: used, Technical details: total power requirement: 1,1 kw volume capacity: 900 m³/h filter surface area: 6,0 m² filter: 1 Stück weight of the machine approx.: 125 kg dimensions L x W x H: 0,74 x 0,62 x 1,8 m Applications: Suction of grinding dust, with other filter inserts is also welding smoke extraction possible - mobile device with rolls - with collecting container for coarse particles - cleaning interval adjustable up to 60 sec - Impulse cleaning, automatically after switching off the system - filtering separator Further technical data: - separation area 6.0 m² - separation rate above 99% - cleaned air remains in the working chamber - in the device is cartridge filter Ø 400mm, length 270mm - filter change manual by hand (maintenance door) Fjdpfx Asu N Ad Nea Esgi *

Condition: used, Surface measuring and recording device SP6 2x feeding device PRK 6720702 1x measuring stand PST-Ue ( transverse = 165mm and vertical adjustment = 440mm) table size 650 x 450mm 1x measuring stand PST-Ve (vertical adjustment 450mm, motorized) + manual control unit; table size 650 x 178mm Perthometer S6P Fedou N Awvspfx Aa Ejgi Without base cabinet, without the granite plate shown in the picture. Can be offered separately. i.D. *

Condition: used, H. KÖHLER GmbH Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Width: approx. 1,200 mm Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Fgsdpszhadcsfx Aa Eji Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, H. Köhler KG Kesternich Testing Device / Corrosion Test Chamber H. Köhler HK 320 BF Kesternich Testing Device Corrosion test chamber for SO₂ corrosion tests For sale is a used corrosion testing device from the manufacturer H. Köhler KG. The device is used for carrying out Kesternich tests under a sulfur dioxide-containing atmosphere and is suitable for corrosion investigations on materials, surfaces, and coatings. Technical data Manufacturer: H. Köhler KG Type: HK 320 BF Device type: Kesternich testing device / corrosion test chamber Test chamber volume: approx. 300 liters Internal dimensions: approx. 725 x 500 x 750 mm External dimensions: approx. 1070 x 570 x 1970 mm Temperature range: RT +5 °C to 60 °C Expandable to approx. 75 °C according to manufacturer's specifications Power connection: 220 V / 50 Hz Power consumption: 1,000 W Compressed air supply: approx. 4.5 - 8 bar Equipment Stainless steel test chamber Large viewing windows Front door with locking mechanism Test specimen carrier / frames SO₂ gas system Pressure gauge Manual controls Base frame with storage area Areas of application Corrosion testing Coating testing Material testing Quality assurance Automotive industry Research and development Condition Used Signs of wear and tear due to age and use Optical condition as shown in the pictures Scope of delivery as shown in the pictures Scope of delivery 1x H. Köhler HK 320 BF Kesternich testing device Accessories as shown in the pictures Shipping is possible. Subject to changes, errors and prior sale. Fgedszclxvspfx Aa Esi We will be happy to answer any further questions by telephone.

Condition: used, Technical details: air flow rate: - m³/h suction stud diamter: 160x45 mm weight of the machine approx.: 68 kg Fgedpeu Nwv Hefx Aa Eoi dimensions L x W x H: 650x600x2300 mm dust suction device without fan (without suction mechanic) installed on a steel fram with 4 base stands, Filter: filter drum Dia.=360x520mm, rotatable manual, space of filter size W:580xWB:560xH:750mm -intake (suction) conection diameter 160x45mm (sideways) - dirt ejection diameter = 280x110mm , bottom opening - exhaust opening diameter=160mm ( ceiling) via flange bolted diameter=250mm and angular adapter dia. = 145mm *

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Fjdpfx Aecnw T Iea Eogi Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Year of construction: 2026, condition: new, functionality: fully functional, usable tank capacity: 5 l, machine/vehicle number: GDI-ECO, Equipment: CE marking, TECHNOMAKS GDI-6000 The TECHNOMAKS GDI-6000 is a high-pressure injector test and cleaning device developed for performing testing, analysis, and professional cleaning operations on injectors used in gasoline direct injection systems. Thanks to its specially designed ergonomic body, aluminum test rail, and durable test chamber, it is suitable for professional service use. The device features 6 special test tubes, each with a capacity of 150 mg, that are resistant to different temperature conditions and have a flexible structure. With the GDI-6000, 1 to 6 injectors can be tested simultaneously. Thanks to its practical connection accessories, injectors can be quickly connected to the system. The special drip and spray observation chamber allows for detailed control of the injector's spray pattern, direction, and leakage. Each test operation can be completed within a maximum of 90 seconds. The device's specially developed electronic pressure measurement system can reach a maximum working pressure of 200 bar. Thanks to tests performed under high pressure, dripping and leakage problems in injectors can be observed more clearly. The integrated printer allows test results to be printed and presented to the customer or relevant organization. 6000+ INJECTOR DATABASE The GDI-6000 has a large database containing reference test values for more than 6000 injectors. The fuel quantity values that the injector should deliver can be viewed on the 7-inch touchscreen. NEW-ENJ+ MODE For injectors not found in the database, the user can create their own test parameters and save new injector information to the system. OHM TEST MODE Allows for the control of the electrical resistance values of the injectors. Thus, the OHM values of the injector coils can be measured during the test. AUTOMATIC TEST MODES AUTO-1: 4000 RPM low-speed test AUTO-2: 5000 RPM medium-speed test AUTO-3: 7000 RPM high-speed test By simulating different engine speeds, it enables the comparison of the fuel quantity and spray performance of injectors under various operating conditions. DRIP / LEAKAGE TEST Thanks to the Leaking Out mode, injectors are checked under high pressure. Leakage, dripping, and pressure loss problems in the injector nozzle can be observed. MANUAL TEST MODE RPM, PULSE, and TIMER values can be adjusted manually by the user. Thus, special test scenarios can be created using the desired speed, triggering time, and test time. PROFESSIONAL CLEANING MODES CLEANING 1: Performs pressurized cleaning by operating the injectors at different speeds between 1000–7000 RPM. CLEANING 2: Increases the open time of the injectors, allowing for more intense pressurized cleaning to be applied to the fuel passage channels and injector nozzles. REVERSE FLUSHING: Using special reverse connection accessories, liquid is applied to the injector in the opposite direction. This method ensures that the injector shaft, nozzle, and internal fuel channels are professionally cleaned. ULTRASONIC CLEANING MODE: During the ultrasonic cleaning process, the injectors can be operated in a controlled manner in the 1000–7000 RPM range. In this way, the mechanical operation and ultrasonic cleaning can be performed simultaneously. Fodjz D S Ezepfx Aa Esgi

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Specification 360/N Type Manual Laminator 360/N Application Laminating dry-film photoresist onto PCBs Max. panel width 635 mm Material thickness approx. 0.05 – 12.7 mm Laminating rollers 2, both driven Temperature control Thermoregulators for the laminating rollers Drive Adjustable transport speed Control PLC Compressed air Required for pneumatic functions Film Dry-film photoresist Fgedozum Afepfx Aa Esi Design Manual laminator Manufacturer/documentation Duesse / Shipley, Rohm & Haas

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Fgedpecnw U Dsfx Aa Eei Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: used, This listing is for a Molecular Devices ClonePix 2 2019 with Compressor Fedpexzg I Iefx Aa Eegi The Molecular Devices ClonePix 2 Mammalian Colony Picker is a fully automated system for the selection of high-value clones used in antibody discovery and cell line development. The ClonePix 2 picker enables a picking speed of greater than 10,000 clones per day making it 10 times faster than labor-intensive limiting dilution and FACS. The ClonePix 2 by Molecular Devices features multiple detection methods, integrated plate storage, animal-free media and reagents, sterility maintenance, and discrete colony formation

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Power Supply: 220V / 380V Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Fgodpfxszkkaye Aa Eoi

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6053000300, Year of construction: 2004, load capacity: 1,600 kg, lifting height: 3,400 mm, fuel type: electric, mast type: simplex, construction height: 2,170 mm, gearing type: automatic, overall weight: 3,300 kg, empty load weight: 2,300 kg, color: orange, Equipment: 3rd hydraulic function, lighting, pallet forks, sideshift, trailer coupling, We would be happy to prepare a financing lease offer for you. The device is in perfect technical and visual condition. The battery acid density is within the acceptable range. Includes charger. Includes Aquamatik filling water tank. We can also perform a new safety inspection (UVV) and service, if desired. Fgjdj Ai E Haepfx Aa Eoi Transportation can be arranged throughout Europe without any problems. No guarantee against errors.

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Fgedpszkkc Usfx Aa Eji Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included

Condition: used, machine/vehicle number: 7447, Year of construction: 1999, operating hours: 13,286 h, load capacity: 1,800 kg, lifting height: 220 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, .: 7447 Device details: Year of manufacture: 1999 Lifting capacity: 1800 kg Lifting height: 220 mm Read operating hours: 13286 h Mast type: Standard Mast height: 830 mm Length/Width/Height: 1830 / 690 / 1300 mm Operating weight: 181 kg Battery from: 2011 Additional device information: ---- The operating hours are generally read hours. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments and sweepers are immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have questions? During our business hours from 7:30 am to 4:00 pm you can reach us. We look forward to hearing from you! We speak English Fgedpfx Aaj Ai Ed Ts Eei Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold as is, not refurbished. All information without guarantee, errors and changes reserved.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F20326G00116, Year of construction: 2016, operating hours: 5,597 h, load capacity: 1,400 kg, lifting height: 4,720 mm, free lift: 1,620 mm, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,720 mm Free lift: 1,620 mm Load capacity: 1,400 kg Fork length: 1,150 mm Fork width: 560 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery voltage: 24 V Battery year of manufacture: 2016 Battery tray length: 740 mm Battery tray width: 230 mm Battery tray height: 610 mm Dimensions & Weight Dimensions (L x W x H): 2,440 x 800 x 2,060 mm Unladen weight: 1,294 kg Operating hours: 5,597 h EQUIPMENT Double stacking function CE marking Fgedpfo Aidygjx Aa Eei Documentation

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200067, type of input current: three-phase, overall weight: 445 kg, input voltage: 380 V, input frequency: 50 Hz, power: 1.1 kW (1.50 HP), We offer this used Omec SBM1200 Manual hydraulic clamp, year of construction 2020. Construction year: 2020 Power: 1.1 kW Voltage: 380 V Frequency: 50 Hz Fsdpfx Aj Afn Eaea Ejgi Weight: 445 kg Phases: 3 phases If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), mileage: 7,78,942 km, power: 310 kW (421.48 HP), first registration: 07/2016, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 3,250 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel-air, total length: 6,940 mm, total width: 2,550 mm, total height: 3,570 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, tachograph, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Fixed - Halogen lamp - Hydraulic system - Air conditioning - Short cab - Manual - Auxiliary drive - Pump - Radio/cassette - Fabric = Notes = Number of axles: 3, Configuration: 6x4, Tare weight: 9375 kg, Gross vehicle weight: 26000 kg, Total tank capacity: 290 liters, Height of fifth wheel coupling: 129 cm, Fifth wheel coupling: Fixed, Number of differentials: 2, Winch pulling capacity: 255 tons, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (recording device), Digital tachograph, Electric windows, Electric mirrors, Radio/cassette, Color: Multicolor, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Seat heating, Bluetooth, Flashing lights, Engine power: 310 kW (416 hp), Number of cylinders: 6, Displacement: 12809 cc, Fuel: Diesel, Euro: 6, Transmission type: Manual, Transmission type: Mercedes Benz, Gears: 16, Clutch pedal, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional Information = Transmission Gearbox: MB, 16 gears, Manual gearbox Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 5 mm; Tire tread depth right: 7 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 9 mm; Tire tread depth left outer: 8 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 7 mm; Suspension: Air suspension Axle 3: Double tires; Tire tread depth left inner: 3 mm; Tire tread depth left outer: 3 mm; Tire tread depth right inner: 4 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Weights Tare weight: 9,375 kg Payload: 16,625 kg GVW: 26,000 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: KLEYN1 = Company Information = Fsdpfxe Afu Dcs Aa Ejgi Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration is arranged quickly • Expert technical services • The assurance of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, travel distance X-axis: 320 mm, travel distance Z-axis: 400 mm, Tool presetting device Manufacturer: ZOLLER Type: Venturion 400 Technical specifications: Z-axis: 400 mm X-axis: 320 mm Condition: used Accessories, tools, and clamping devices shown are included in the scope of delivery Fodpj Aivw Uofx Aa Esgi only if this is explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!