Used Snow Plow for sale (343)

Condition: used, Wheel Loader Zeppelin ZL 80 Year of manufacture: 1999 Attachments: - Pallet fork - Hydraulic folding bucket ZL 80 SW Djdpfx Aoy Itzqsa Nekl Width: 1.85 m Year of manufacture: 2021 - Snow blade

Condition: used, mileage: 19,262 km, power: 126 kW (171.31 HP), first registration: 11/1996, overall weight: 9,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: mechanical, total width: 2,500 mm, total height: 3,100 mm, Equipment: ABS, all wheel drive, Very nice fire engine 8/6 with Dinol cavity sealing! Mercedes-Benz 917 AF 4x4 crew cab with 4 doors First registration: 01.11.1996 Approx. 19,262 kilometers 6-cylinder engine, 5,958 cc 126 kW / 171 hp Wheelbase: 3,100 mm All-wheel drive 5-speed manual transmission Reduction gear (crawler gear) Locking differentials: longitudinal, rear & front! Power steering PTO (power take-off) Tilting windows 9 seats with seat belts Heated exterior mirrors Fog lights Single tires 335/80 R20 MPT 81 4 x snow chains Spare wheel Trailer coupling Rockinger, 12/24 volt socket Body by Schlingmann, DIN 14530 Djdpfxjycn Hco Aa Nskl 600-liter water tank Rapid intervention reel on the right Rear pump: 266 hours Valid TÜV (MOT) approval until 12/2026 Registered unladen weight: 6,540 kg Registered maximum speed: 96 km/h Camper Expedition vehicle World travel vehicle Motorhome

Condition: used, functionality: fully functional, power: 375 kW (509.86 HP), first registration: 01/2018, Year of construction: 2017, operating hours: 8,000 h, machine/vehicle number: WKU5826MAGL012505, Used PistenBully 600 W Polar for Sale – 2017 – Ready for Dodoy Eh Elepfx Aa Njkl We offer a used PistenBully 600 Wide Polar, year of manufacture 2017, the first registration 1/2018, in good working condition. The machine has been regularly serviced and is fully operational. It is ready for the upcoming winter season.

Condition: used, mileage: 20 km, power: 151 kW (205.30 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,320 kg, color: black, gearing type: automatic, number of seats: 5, total length: 5,403 mm, total width: 1,949 mm, total height: 1,920 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal Number: 21535 Consumption data for base vehicle before conversion. Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Kunath conversion: Western Defender 72 snow plough (218 cm wide; PE scraper bar; additional headlights; cab-mounted control unit) – SALTDOGG mounted spreader (500 ltr electric salt spreader, plastic hopper, incl. Harting industrial connector) – amber rotating beacon * Audio System 89: Ford SYNC 4A, Ford Navigation, AppLink and 10-inch touchscreen – FM/DAB antenna – 6 speakers – Android Auto and Apple CarPlay – Bluetooth hands-free and audio streaming – steering wheel remote control – Ford Power-Up software updates (over-the-air update) – radio player – USB port – voice control via audio and phone * Air conditioning with automatic temperature control (2-zone automatic climate control) with dust and pollen filter * Load compartment protection liner "sprayed", 12-volt socket on flatbed * Auxiliary heater, programmable, with remote control * Technology package 52: Intelligent adaptive cruise control (iACC) including intelligent speed limiter with speed limit display – Blind spot assist with trailer coverage – 13-pin trailer hitch – electronic brake booster – Advanced lane keeping assist including lane keeping assist and driver drowsiness alert – Park pilot system front/rear – automatic emergency braking when reversing – reversing camera with "split view" technology, LED rear lights * Winter package 1: Heated leather steering wheel – heated front seats ADDITIONAL EQUIPMENT * ABS * Two front tow hooks * Four-wheel drive (selectable all-wheel drive) with electronic range selection * Battery management system * Bilstein suspension * Illuminated roof console * ESP * Electric windows Dkedpeyn Uf Nsfx Aa Nsl * High beam assist * FordPass Connect incl. eCall and WiFi hotspot * Heated windscreen * Easy Lift tailgate * Electrically operated tailgate lock, without lock cylinder * Auto-dimming interior mirror * 8-inch digital instrument panel * Integrated rear step * Multi-function steering wheel * Front center console with integrated armrest * Engine cover * Engine and tank protection * Fog lights * Off-road package: rotary drive mode selector – Terrain Management System with 6 selectable drive modes – off-road SYNC display * Wheel package 23: 4 alloy wheels 8J x 17 with LT 265/70 R 17 All Terrain OWL tires with snowflake symbol, Asphalt Black Matt – 17-inch alloy spare wheel * Rear seat package 15: 3-seater bench with three height-adjustable headrests, three 3-point seat belts, center armrest and folding seat cushion – seatbelt warning for front and rear – ISOFIX mounts on outer seats * Safety package 3: Advanced airbag restraint system – front passenger – passenger airbag deactivation function – driver front airbag – driver and passenger seats with reinforced side bolsters – knee airbags for driver and front passenger – curtain airbags above the side windows – side airbags for driver and front passenger – reinforced body structure – reinforced frame * Seat package 3: Driver’s seat manually adjustable 6 ways – passenger seat manually adjustable 4 ways – seat heating for driver and passenger – map pocket on driver seat backrest * Particulate filter: Diesel particulate filter (DPF) with SCR catalytic converter * Upholstery: Artificial leather * Pre-Collision Assist including distance indicator and distance

Condition: new, power: 110 kW (149.56 HP), overall weight: 6,000 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro6, Year of construction: 2026, total width: 1,800 mm, total height: 2,100 mm, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, FUSO CANTER 6S15 Skip Loader (latest generation) Immediately available / VAT deductible * 3.0L Turbo Diesel Engine 110 kW / 150 HP EURO 6 * Start/Stop system * 5-speed manual transmission * Wheelbase 2500 mm * Batteries 2x 12V / 100Ah, maintenance-free * Rear axle twin tires with automatic differential lock * Traction tires RA: 205/75 R16C * Electronic Stability Program (ESP) * Lane Departure Warning System * Brake Assist (AEBS) * Turn Assist Dksdpfx Aasy H Trmj Nel * Driver airbag * ABS with electronic brake-force distribution * Halogen fog lights * Electric windows and mirrors * Dual passenger seat * Height and tilt adjustable steering column * PTO (power take-off) * Single-circuit hydraulics * Hand throttle engine speed control * Automatic climate control * Canter safety package * Double DIN radio with Apple CarPlay and rear-view camera 3 years warranty on the chassis, valid from first registration or up to 100,000 km Skip loader body by King * Individually telescoping lift arms * Radio remote control * Hydraulic outriggers * Chains with safety hooks and chain shorteners * Detachable container stops * Payload approx. 3,000 kg * Lifting capacity 4,000 kg * Superstructure CE-certified * Powered by vehicle hydraulics * Fixed superstructure with reinforced subframe * Rear wall protection grid * LED work lights rear * LED reversing lights * Emptying via hydraulically operated tipping hook Matching containers in stock. Other cab variants, wheelbases, superstructures and hydraulic systems for snow plough and spreader available from stock or for prompt delivery. Please inquire! Other vehicles of the Fuso Canter and Multicar brand as well as various container sizes available at: Leasing / Financing / Trade-in of your used vehicle. ALL ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to prior sale, changes, and errors. Our general terms and conditions apply.

Condition: new, power: 110 kW (149.56 HP), overall weight: 6,000 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, loading space width: 1,800 mm, loading space length: 3,000 mm, loading space height: 400 mm, Year of construction: 2026, total width: 1,700 mm, total height: 2,000 mm, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Fuso Canter 6S15 3-Way Tipper New Generation with Winter Package (incl. VAT) Immediately Available * 3.0L Turbo Diesel Engine 110 kW / 150 HP EURO 6 * Start/Stop System * 5-speed Manual Transmission * Wheelbase: 2500 mm * Payload approx. 2,900 kg * Rear axle twin tyres with differential lock * Traction tyres 205/75 R16C * Four-wheel disc brakes * Electronic Stability Program (ESP) * ABS with electronic brake-force distribution * Towbar with ball coupling * Electric windows * Central locking with remote control * Immobiliser * Adjustable steering wheel and steering column * 7-inch radio with Apple CarPlay and reversing camera * Digital tachograph * EC-type approved driver’s log * Over-windshield & behind-seat storage * Double passenger bench * Driver’s seat with armrest * LED headlights * Tilting cab * Automatic climate control Dksdpfsy Hzfhex Aa Nol * Lane departure warning system * Emergency braking assistant * Lane keeping assist * Multifunction steering wheel controls * 3-way tipper body from Scattolini incl. side toolbox 3200x1800x400 mm, rear swing tailgate, lashing eyes in the floor, side transport box 3 years manufacturer’s warranty up to 100,000 km Hilltip Winter Package: Snow plough 2.20 m, hopper spreader 1.1 m³ incl. control console * Other cab variants, wheelbases & body types in stock or available at short notice. Please enquire! You can find more vehicles from Fuso Canter and Multicar, as well as various container sizes at: Leasing / Financing / Trade-in * ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted * Our terms and conditions apply.

Condition: used, mileage: 5,53,461 km, power: 160 kW (217.54 HP), first registration: 04/2014, fuel type: diesel, empty load weight: 8,500 kg, maximum load weight: 3,490 kg, overall weight: 11,990 kg, axle configuration: 4x2, wheelbase: 5,200 mm, next inspection (TÜV): 01/2026, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 7,450 mm, loading space width: 2,400 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, cabin, central locking, cooling unit, differential lock, fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, tail-lift, traction control, German vehicle, TÜV valid until 01/2026, documentation available. Condition: see photos. Refrigerated box body POLARUS, type SLTK, Fresh-/deep-freeze box CARRIER, type SUPRA 850Mt, dimensions: length 7.45 m x width 2.40 m x height 2.40 m. Cooling capacity from -20° to +18°, 3-zone refrigeration system, stationary and in-transit cooling via diesel and electric drive. Extra-flat evaporator for optimal loading, rear portal doors, aluminum floor, MBB Palfinger tail lift, type 2000K, load capacity 2,000 kg. Air conditioning, automatic transmission, air suspension with lift/lower function, air-suspended driver comfort seat, snow chains, reversing camera, electric windows, heated electric mirrors, electric engine brake, Bluetooth phone, ABS and ASR, fog lights, cruise control, roof spoiler, roof hatch. Wheelbase: 5.20 m, gross vehicle weight: 11,990 kg, unladen weight: 8,500 kg, payload: 3,490 kg. If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. Additional trucks can be found on our website. We speak the following languages: German, English, Polish, Turkish. Note: We offer and highly recommend viewing and inspecting the item to avoid misunderstandings regarding the condition and suitability at the buyer’s end. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All details provided are without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obligated to verify the condition and equipment of the goods/vehicles independently. Dsdpewivf Uofx Aa Nskl Subject to prior sale, changes, and errors.

Condition: used, functionality: fully functional, power: 260 kW (353.50 HP), first registration: 05/2001, fuel type: diesel, color: orange, axle configuration: 1 axle, fuel: diesel, Year of construction: 2001, operating hours: 2,590 h, machine/vehicle number: 15, SCHMIDT - VAMMAS SB 3600 H Dkedpfx Aaopgvlko Nol Ready for operation

Condition: ready for operation (used), functionality: fully functional, mileage: 2,800 km, power: 86 kW (116.93 HP), gearing type: hydrostat, fuel type: diesel, overall weight: 7,000 kg, tire size: 500/45-20, tire condition: 99 %, DGUV certified until: 05/2025, Year of construction: 2022, operating hours: 100 h, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, differential lock, hydraulics, For sale: as-new Vermeer 550 vibratory cable plow, year 2022, with Case 860 4T 390 tractor, 86 hp, year 1998, approx. 6.5 t. Up to 120 cm depth, 3 different blades, cable ducts for up to 4 x 50 mm fiber-optic conduits or water pipes. Remote control for the plow. Operating manual. Various wear parts. Ready for immediate use. Dodpfx Aaoy Ew S Us Nokl

Condition: used, mileage: 20 km, power: 125 kW (169.95 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,225 kg, color: black, gearing type: automatic, number of seats: 3, total length: 5,450 mm, total width: 2,032 mm, total height: 1,976 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Internal number: 21927 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT * Fixed tow bar * 70 l fuel tank * Metallic paint Djdpsynqdnofx Aa Njkl * Technology Package 6: Exterior mirrors with integrated indicators, electrically adjustable, heated, and foldable * Audio system with 13-inch multifunction display, Ford SYNC 4 including navigation and Blind Spot Assist incl. CTA rear emergency braking assistant, Pre-Collision Assist, camera and radar-based driver alert, Lane Keeping Assistant and Lane Change Assistant, Traffic Sign Recognition, Wrong-Way Driver Warning, Front and rear Park Pilot System, Adaptive Cruise Control with Stop&Go * 360-degree camera system * Sensico steering wheel in leather look * Wheels: All-season tires (winter-approved) R16. The tires are marked with the "3 Peak Mountain Snow Flake (PMSF)" symbol, making them certified for winter use. ADDITIONAL FEATURES * 2-stage unlocking passenger compartment/cargo area * Electronic ABS with EBD * Driver's airbag * Exterior mirror housings in black-grey plastic * Battery: H7 AGM single battery * Flat roof * Roof console * Double rear wing doors (without window), 90 degrees, unlockable up to 168 degrees * Tachometer * Third brake light * Electronic safety and stability program (ESP) – Hill start assist – Emergency Brake Assist (EBA) – Traction Control System (TCS) * Electric front windows * Electronic parking brake * Heated windscreen * Rubber floor mats (front) * Transmission: 8-speed automatic * Grab handles (driver and passenger side) * Lockable glove box lid * Front interior lighting * Automatic climate control * Headrests (3) * Load compartment lighting (LED) * Small center console * eCall emergency call assistant for transmitting an emergency call in case of an accident or manual activation * Particle filter: Diesel particulate filter * Radio accessories: 4 speakers * Full wheel covers * Tire repair kit * Tire pressure monitoring system * Wheels: Steel 6.5J x 16 with 215/65 R16 * Gear lever on steering column * Rain sensor wipers * LED dipped beam headlights * Sliding door rear, right * Rear mud flaps * Front mud flaps * Power steering * Seat belts * Seat Package 11A – Driver's seat, 4-way manual adjustment – Dual passenger seat with through-loading hatch, fixed – Lumbar support for driver – Plus Style fabric upholstery, seat center panel in Black Onyx, rest in Ebony * Start-stop system * Ford Power start function * Front and rear bumper partially painted in body color * Partition wall (metal) without window * Door handles in black-grey plastic * Recirculation heater * 8 tie-down points * Immobilizer * Heat-insulating glass, lightly tinted * Central locking with remote control ... and much more. ---- Single ownership. German specification. Subject to errors and prior sale. 2 years’ manufacturer warranty from initial registration (extendable upon request). We are happy to accept your vehicle as a trade-in. Financing/Leasing available even without down payment! Any questions? We are happy to advise you! As, despite existing checks, deviations of the vehicle from the above description cannot be completely ruled out, please note that this vehicle description serves only for the general identification of the vehicle and does not constitute a warranty as defined by sales law. The terms stated in the order confirmation or purchase contract alone are binding. The exact equipm

Condition: used, mileage: 2,17,605 km, power: 206 kW (280.08 HP), first registration: 12/1987, fuel type: diesel, empty load weight: 9,710 kg, maximum load weight: 7,290 kg, overall weight: 17,000 kg, tire size: 13R22.5, axle configuration: 4x4, wheelbase: 4,500 mm, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, Vehicle location: Bovenden, main facility, 1x air suspension seat, rear window, PTO, differential lock, high-beam headlights, rotating beacon, leaf suspension, winter service equipment, underrun protection, side aluminum underrun protection, roof hatch. Wheelbase: 4,500 mm. ZF mechanical manual transmission. Body length up to 6m possible! Suitable Epoke snow plough -9370- and Epoke salt spreader -9452- available at extra cost! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Dodpfxsy Hrv Rj Aa Njkl

Condition: excellent (used), functionality: fully functional, first registration: 12/2013, overall weight: 1,400 kg, fuel type: diesel, color: black, axle configuration: 2 axles, gearing type: hydrostat, suspension: steel, Year of construction: 2013, operating hours: 1,750 h, Equipment: ABS, additional headlights, all wheel drive, differential lock, fog lights, hydraulics, parking heater, Authorized SUBARU dealer offers for sale a professional, multifunctional municipal vehicle Kärcher MIC C 34, year 2013 – in use since 2015. This is a reliable and economical machine designed for year-round maintenance of urban areas, sidewalks, parks, and residential complexes. Thanks to its compact dimensions, 4x4 drive, and articulated frame, it delivers excellent maneuverability and high work efficiency. Additionally, this machine is offered with a robust tipping trailer included, featuring rear unloading functionality. The machine comes from its first owner in Denmark, who used it for farm transport. Therefore, no attachments are included, though we can source them upon request. The price includes a complete set of documents for registration. We offer all forms of payment: leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the vehicle away directly from our dealership. We also deliver paid vehicles—cars and trucks—directly to your chosen address anywhere in Europe. For more information about our services, please contact our sales team. Technical specifications: Dedpjy Dtpyjfx Aa Nekl Brand and model: Kärcher MIC C 34 Engine: Diesel, turbocharged Power: 25 kW / 34 hp Drive: 4x4 (all-wheel drive) Maximum speed: 20 km/h Gradeability: up to 25% Fuel tank: 37 l Dimensions and weight: Length: 2300 mm Width: 1090 mm Height: 1970 mm Unladen weight: approx. 1400 kg Gross vehicle weight: 1750 kg Equipment and advantages: - All-season cabin with heating and air conditioning - Hydraulic drive for attachments - Articulated steering for exceptional maneuverability - Comfortable operator’s seat - Road and warning lighting - Quick-change tool system - Low fuel consumption and cost-effective operation Applications: Ideal machine for year-round work: - Sweeping streets and sidewalks - Snow and ice removal - Spreading salt and sand - Mowing green areas - Washing surfaces and maintaining public spaces Technical condition: The machine is in good technical condition, ready for work. Regularly serviced and well maintained. Fully refurbished and preserved. The listed price is net and applies for export and companies. Significant discounts available for private customers – please contact us directly by phone to get your best price. After price negotiations, for serious buyers, we can provide detailed videos, computer diagnostics, or paint thickness measurements to facilitate safe remote purchases.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Djdpfxjh R Taqs Aa Nekl The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) Dkodpfx Asmhhypoa Nel - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Dodpfxemhh Dho Aa Nskl Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Dsdsmhh Dzspfx Aa Njkl - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Djdpfxed Tbbde Aa Njkl - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Dsdpfxsfdkb Te Aa Nskl - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. Dksdpfx Ajmhhx Ioa Njl The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments Dodpfx Ajmhhyaea Nokl - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Dkedpfx Aajd Tqalj Nol - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles Dkjdpsh Ek Daefx Aa Nol - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Djdpfx Aasmhh Ano Njkl Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Dkedsfdkb Uopfx Aa Nol - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Dodsfdkbhspfx Aa Nokl The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.