Used Softstarter for sale (9)

Condition: used, Year of construction: 2016, Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments The dimensions of the raw material wsdowego The length of the elements batch mm 170 ÷ 900 The amount of cutting mm 20 ÷ 155 The width of the package of workpieces 600 mm Capable of milling tools with a length of 10 mm teeth (5, 15, 20 optional) Duty cycle automatic with manual loading of the material Air working pressure of 0.6 MPa Compressed air requirement m3 / h approximately 10 Performance exhaust ventilation m3 / h approx. 6000 Performance cykl./min approx. 2.5 Carriage speed m / min Working 10-23 return 32 Operating voltage AC 3x400 V + N + PE The frequency of 50 Hz Control voltage 24 V DC The starting system drives the cutter SoftStart Control of spindle speed rpm. 6000 ÷ 4500 Dljdpfxjc U Txks Addsa Protection against drop in air pressure below 0.45 MPa Mills operating in diameter? 200? 250 (optional? 160 to? 200) - does not fall within the scope delivery Possibility of międzycięć pre zaczopowanej strip: possible to program the number of sections - 8 accuracy of approx. 10 mm in a single section (depending on the number and length czopowanych elements)

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, filter area: 50 m², suction capacity: 6,000 m³/h, compressed air connection: 5 bar, power: 5.5 kW (7.48 HP), Equipment: type plate available, Teka Filtercube 4H Year of manufacture: 2019. 5.5 KW / 11.5A - Equipped with Softstarter and Siemens PLC control. - Includes 4x25m2 NEW filter cartridges installed in the unit. - Fitted with compressed air cleaning system, Delta P controlled. - Ex works Soerendonk (NL), loaded onto truck free of cost. Tested and operational in our workshop. Dledpfx Aexuqurjddoa - Supplied with Softstarter option included. - Including 4x 25m2 NEW filter cartridges fitted in the machine. - Fitted with compressed air dust discharge system, Delta P controlled. - Ex works Soerendonk (NL), loaded on truck free of cost. - Sold as is, no warranty. - Tested on site in proper working condition. - Testing and inspection possible.

Condition: used, This listing is for a Sigma Aldrich 2Mag MIX 1 magnetic stirrer The unit is in full working condition and is ready for immediate release. The Sigma Aldrich 2Mag MIX 1 magnetic stirrer is a powerful, wear-free magnetic stirrer designed for demanding lab use, featuring an inductive magnetic drive for reliable and maintenance-free operation. It offers a stirring volume of up to 10,000 mL, a speed range of 100 to 2000 rpm, and a digital display for speed and power settings. The stirrer has an ultra-flat, stainless steel housing that is easy to clean and includes features like SoftStart for smooth acceleration and QuickSet for fast speed adjustments. Key features Drive system: 100% maintenance-free and wear-free using the inductive 2mag-Magnetic-Drive concept. Speed: Ranges from 100 to 2000 rpm, with jerk-free stirring even at low speeds. Stirring volume: Capable of stirring up to 10,000 mL. Power settings: Adjustable power settings up to 20 watts, with 4 different power levels for varying applications, from high-power viscous mixing to low-power continuous operation. User interface: Clear digital display for both speed and power settings. Dedpfx Adoxrt U Aodola Design: Ultra-flat and durable stainless steel housing that is resistant to chemicals and easy to clean. SoftStart: Ensures reliable catching of the stir bar and safe acceleration. QuickSet: Allows for quick setting of start and maximum speeds. Memory function: Automatically saves the last settings used.

Year of construction: 2009, condition: new, Carrier chiller 19XR7070LF475 ,YEAR 2009, 290h run hours , 3100KW/1000ton cooling capacity, turbo compressor, Dlsdpeb Tulwjfx Addoa Siemens Softstarter, R134a, high Efficient , 400V 50Hz, commissioning and service available.

Condition: new, Year of construction: 2025, The rounding machines in design are based on former Oswald princip with a lot of new features. The machines are build modular und can be delivered in different sizes and with different options. The machine is available as single head or double head machine. Depending on the number of heads the machine can work up to 35 m/min, with speed control system even higher. The machines are available as model series with a total range from 30 up to 400 mm. RM 30 – 120, RM 40 – 160, RM 80 – 200, RM 100 – 300, RM 160 – 350, RM 160 – 400 Dsdpfx Ajfw Ay Nsddola The rounding machines haf a lot of new features. All feed wheel pairs are opening and closed by valve cluster no mechanical dimension adjustment is needed. The rounding machine control is done by movable switch cabinet and control box for pressure regulation of segments of fedd rollers. The motors will be start by softstarter. For smoother surface condition or faster feed speed the machining heads are turning with higher speed. A control system is available for automatic speed control, depending on differenc between final log size and incomming log dimension. For save operation all doors are secured with electrical holder. To open the door the machine has to be stopped. This is needed to fulfill the high expectation of the the machine safety for secure operation.

Condition: excellent (used), Year of construction: 2020, For sale: SERON 2131 PRONEST CNC Machining Center with a working area of 2100x3100 mm. I also have additional machines selected to complement this machining center. The set offered in this listing includes: - Z-axis travel 300mm Expert, PRO – 1 pc. - OMRON SERVO AC HIGH SPEED drives (complete with planetary gearboxes) 1.5KW ETHERCAT - 2131 Raster vacuum table – 1 pc. - Pneumatically controlled vacuum section – 6 pcs. - Vacuum pad (porous board) – 6.51 m2 - Pump control system up to 5.5KW (protection + SOFTSTART) – 2 pcs. - Becker VTLF 2.250 vacuum pump – 5.5KW, capacity 244 m3/h, absolute pressure 200 hPa, 2 pcs. - OSAI 4-axis control system – 1 pc. - Manual controller – 1 pc. - HITECO electrospindle 13KW set (max 15KW) – ATC, up to 24,000 RPM, liquid cooled (CW6000 chiller required), tool clamping HSK63 – 1 pc. - CW-6000 active cooling system (chiller for spindle power up to 20KW) – 1 pc. - 12-position turret tool magazine – 1 pc. - Precision tool height sensor – 3 pcs. - Suction foot adapted for 4-axis machines – 1 pc. - Automatic centralized lubrication system, solid grease TIMKEN/SKF – 1 pc. - Positioning stops control system – 1 pc. - Positioning base (from 60mm to 120mm) – 5 pcs. - VECTRIC CUT 2D CAD/CAM – 1 pc. - SERON WOP CAD/CAM – 1 pc. - NCAD (Requirement: SERON WOP) – 1 pc. - Drilling unit control (Drilling optimization, requirement: SERON WOP) – 1 pc. - HITECO TF.C 12V.4H.2B.A boring unit (12 vertical tools, 4 horizontal tools, 2x saw) – 1 pc. - 2131 Safety fence with electronic safety system – 1 pc. - HSK-F63 (ER32) toolholder – 12 pcs. - Set of ER32 collets (range 3-20mm, 18 pcs.) – 1 set - Conveyor-type outfeed table system with cleaning/suction ledger beam set – 1 pc. - Infeed table with automatic vacuum suction cup system and worktable positioning system – 1 pc. Dledpfxjupg Rrs Addoa - ZEBRA GK420T desktop printer – 1 pc. - LI4278 barcode scanner – 1 pc. This set was used for cutting and processing panels in a furniture manufacturing company. Low operating hours – only 3,331.51 hours, as shown in one of the photos. Available for inspection in 11-510 Wydminy, Warmian-Masurian Voivodeship, by prior arrangement. For technical information, please contact: 6.0.3-6.2.9-6.3.3 To arrange an inspection, please call: 5.0.2-2.3.7-2.1.6 I also have other machines and paint shops for sale. THE PRICE IS NET – sale based on VAT invoice at 23%. The machines are well maintained and in very good technical condition. I am selling them because after nearly 5 years of retirement, it is time to actually start enjoying it.

Condition: excellent (used), ALUP SCK 31-10 screw compressor with SOFTSTART (does not load the network during start-up) after service Technical data: capacity: 3.20 m3/min; 22 KW engine; pressure 10 bar mileage 13840 h; Compressor fully operational; we provide service Djdpewb Dftjfx Addola net price: 8000 PLN gross price: 9840 PLN

Condition: good (used), Manufacturer: LuT Metalltechnik GmbH Type: LTP 1300/1300 Rotor Dia. x W: 1.300 x 1.300mm. Inlet size: 1.360 x 1.000mm Included: Djdpfxowu Uqye Addsla – 160 KW E.motor – Control-cabinet with softstarter New Spare-parts in stock. Crusher can be sandblasted and painted.

Condition: new, Year of construction: 2025, the SQUALO 615 multi-blade or multi-blade circular saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. moreover it is 2-in-1 as it can be configured as a trimming machine with 1 or more movable blades. ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. Rollers / conveyor belt width 620 mm Width of infeed / outfeed conveyor rollers 620/720 mm Max saw unit width 590 mm Max cutting height (without pad) mm 150 (mm 125 Trimming machine) Min. Length working mm 800 Max width passage 800 mm Blades hole diameter mm 80 (mm 104 Trimming machine) Circular blades diameter 250/470 mm (480 mm Trimming machine) Blade shaft speed rpm 3.800 Variable feed speed with ROLLS 3 - 36 m / min Variable feed speed with CARPET m / min 4 - 25 Dsdpjhpbxijfx Addsla optional: softstarter start