Used Sondex Heat Exchanger for sale (14,323)

Condition: used, Year of construction: 2011, operating hours: 32,500 h, functionality: fully functional, power: 140 kW (190.35 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, overall weight: 3,500 kg, temperature: 25 °C, We are offering this used MAN E2876 combined heat and power unit, year of manufacture 2011. Year: 2011 Model: E2876 E312 Engine number: 298 3025 272 3007 Serial number: 3007 Factory number: 5019615 Job number: Power output: 150 kW Speed: 1,500 rpm Ijdpfoylmbqex Abcjap Temperature: 25 °C Installation altitude: 100 m If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2024, operating hours: 170 h, functionality: fully functional, We are offering this as-new Danube WED 120C washing machine/steam heater, year of manufacture 2024. Ijdpsymlh Ejfx Abcjap Manufacturer: Danube Model: WED 120C Year of manufacture: 2024 Condition: as new Category ID: 590 Type ID: 1792 Machine type: Washing machine/steam heater If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Iajdpfxewa Ax As Abcep Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest.

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Immediately available – Hop in & get started! Are you looking for a reliable, modern, and ready-to-use mini excavator in the 2.0-ton class? The LT-20 PRO from Tec-Point GmbH impresses with powerful performance, high-quality construction, and maximum comfort – perfect for construction, landscaping, and municipal tasks. Thanks to its compact design and modern load-sensing hydraulics, this machine is ideal for tight construction sites yet powerful enough for demanding earthworks and foundation projects. The enclosed, heated cabin makes the LT-20 PRO a truly professional all-year-round machine! ⭐ Your Benefits at a Glance ✅ Side-swing boom (boom swing) – ideal for working in confined spaces ✅ Telescopic undercarriage 990–1,300 mm – maximum stability ✅ Load-sensing hydraulics – precise & energy-efficient control ✅ Axial piston pump with variable flow rate ✅ Travel motors with high-/low-speed modes ✅ Double cast counterweights – increased stability ✅ Rugged 230 mm rubber tracks – durable & wear-resistant ⚙️ TECHNICAL SPECIFICATIONS Operating weight: approx. 1,800 kg Engine: Kubota D902 | 3-cylinder diesel Power: 11.8 kW / 16.1 HP Digging depth: up to 2,270 mm Digging reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Gradeability: 30° ️ COMFORT & FEATURES ✔ Enclosed comfort cabin including heating ✔ Ergonomic joystick control ✔ LED work lights ✔ Comfort seat for long shifts ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel construction for maximum load capacity INCLUDED IN THE SET: 3 BUCKETS The package includes 3 professional buckets: ✅ 25 cm trenching bucket ✅ 50 cm digging bucket ✅ 100 cm grading bucket ➡️ Ready for any job site immediately! ➕ OPTIONAL AT EXTRA COST Hydraulic quick coupler ➡️ Note: The quick coupler shown in the images is not included in the standard package and can be ordered as an option. Hydraulic tilt quick coupler (tilting function) Ijdpfxox Hg D Aj Abceap ➡️ Note: The tilt quick coupler shown in the images is not included in the standard package and can be ordered as an option. Hydraulic auger set up to Ø 300 mm ️ SERVICE & WARRANTY Maintenance every 250 operating hours or annually 12 months warranty Europe-wide Spare parts & service directly from our Rheda-Wiedenbrück warehouse IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Europe-wide delivery can be arranged on request Location: Rheda-Wiedenbrück Our machines are available and ready to work immediately. You are welcome to inspect and test all our machines on-site. PROMOTIONAL PRICE €17,800 net (RRP) Special price possible – contact us today! Request your quote & secure your advantage! Demand is high – reserve your LT-20 PRO now. ➡️ Contact us directly via Machineseeker or give us a call – we are happy to advise you personally!

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III Ijdpfxew Hxgvs Abcjap The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Condition: excellent (used), Large size blastroom for surface preperation and finishing large workpieces 4 shotblasting units Filtration system NEON Lightning 250 W Automatic front door Service door in BMS System Smooth control by means RACK system 2 Abrasive operator system 2 Opperator platform with basket Isdpsygk S Njfx Abceap 2 Magic Blast Controllers 4 ACF Shotblasters SV206 with 205Liter Schneider MAGELIS opperator display control panel Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, tank capacity: 1,000 l, 1000 liter electrically heated, insulated container made of V2A stainless steel Iasdjyfwpxopfx Abcjp

Condition: used, Year of construction: 2003, Please state your offer price. Iedpjuqu R Aefx Abcoap Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: excellent (used), Year of construction: 2014, Viesmann Vitoplex 100 LS with Weishaupt WM - G10/4A Iodpfx Aotrl Sksbcoap

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 134291, heating capacity: 205 kW (278.72 HP), We are offering a fully operational wood chip combustion plant, pneumatically fed by two fans. The plant is still in operation and must be dismantled by the buyer. Inspection is welcome. Iaedpfx Aeyl R Twebcop

Condition: used, Year of construction: 1986, functionality: fully functional, heating capacity: 1,500 kW (2,039.43 HP), nominal heat output: 1,500 kW (2,039.43 HP), operating pressure: 6 bar, pressure: 6 bar, Equipment: documentation/manual, hot water, We are offering this used MAWERA FU 1300 RA heating system, year of manufacture 1986. Includes control cabinet, flue gas cleaning, and induced draft fan. Model: FU 1300 RA Year: 1986 Nominal heat output: 1,500 kW Permissible operating overpressure: 6 bar Permissible flow temperature: 120°C Price: €5,000 We are also offering a used MAWERA FU 550 RIA heating system, year of manufacture 2001. Model: FU 550 RIA Year: 2001 Nominal heat output: 550 kW Permissible operating overpressure: 6 bar The FU 550 RIA has already been dismantled. Price: €4,500 In addition, the shared push floor discharge system with twin auger and hydraulic power unit, as well as an Eder pressure maintenance and degassing system, are available for sale. Dimensions of the system can be found in the pictures. Prices apply to the boilers only. The system is still in operation and can be inspected at any time. Scheduled dismantling date: mid-May 2026. Dismantling by the seller is possible; dismantling costs will be charged separately. Iaodpfxjykmd Aj Abcop If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 90 kg, total length: 4,900 mm, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, input frequency: 50 Hz, gas tube heater Solaronics TU.E 23 production year: 2020-22 heat output: 23kw gas burner + exhaust fan pipe length: 2x 4.9 meters G20.1 Nominal connection pressure: 25 mbar Nominal gas consumption: approx. 2.5 m3/h Gas connection: 1/2 " Iodpfeq Hu Afox Abcjap Connection voltage: IP21 AC 230V 50Hz

Year of construction: 1991, condition: excellent (used), Manufacturer: Beck Max. throughput: 650x300mm Max. temperature: 350 °C Stepless speed adjustment, forward/reverse. Iaedpfx Aemv E Icsbcop 400V, 50Hz, 28A Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH)

Year of construction: 1988, condition: excellent (used), Manufacturer: Beck Iaedpomv Hy Hsfx Abcjp Max. throughput: 660x180mm Max. temperature: ca 300 °C Stepless speed adjustment, forward/reverse. 400V, 50Hz, 28A Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH)

Condition: good (used), Year of construction: 1998, gas heater WSG 100PA 9800m3 / h hall heating made by WSG 100PA Maximum air flow: 9800 m3 / h heating power 110 kW Gas connection: 3/4 " gas: g20 natural gas axial fan 2pcs electric power: 230v 50Hz 0.62kw can be suspended Iedpohrnv Nofx Abceap mechanically adjustable slats honeywell gas regulator enclosure Size H: 150 cm SZ: 100 cm M: 155 cm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar Iedpfxed Tiu Ee Abceap OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: good (used), Year of construction: 2002, functionality: fully functional, input frequency: 50 Hz, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm Iasdpfju A Illox Abcsp width: 700mm height: 500mm weight 110 kg

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, height 810 mm. Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg Iajdpfx Aevzqyfjbcjp

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heater Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Usable Heating Plate Area: Width 600 mm x Depth 400 mm Maximum Part Dimensions: - Max. Part Width: 620 mm - Max. Part Depth: 420 mm - Max. Upper Part Height: 350 mm - Max. Lower Part Height: 350 mm (Combinations of part heights possible, depending on contour) - Max. Working Temperature for contact process: 400°C The machine's modular frame structure enables easy retrofitting and conversions. Side doors and the front door in the welding area are easy to open (for simple retooling). The automatic safety lift door ensures high operator safety. Temperature controllers on the operator panel are equipped with actual/target value displays. The operator panel is a Siemens PLC unit. Machine control is via Siemens PLC (S7-300 controller). The heating elements feature temperature sensors for temperature regulation and act as a safety shut-off in case of overheating. Locating pin systems on the tool clamping surfaces enable reproducible receptacle positions. Advantages of Heater Element Welding Technology: - Secure welding of parts with thin or varying wall thicknesses is possible - Low rejection rate due to precise and reproducible weld joints - Thanks to precise time control, temperature control, and force dosing, even sensitive parts can be welded - Almost all thermoplastics can be welded with this process - Different plastic types can be welded together (compatibility should be checked) Technical Data: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA Iasdpfoykvdlox Abcjp - Nominal current: 20 A - Required supply cable cross-section: 5 (supply cables) each 6 mm² - Required pneumatic connection: 6 bar Machine Dimensions: - Machine width approx. 1.22 m - Machine width incl. operator panel approx. 1.8 m - Machine depth approx. 2.1 m - Machine depth incl. operator panel approx. 2.6 m - Machine height approx. 2.4 m - Machine height with raised safety door approx. 2.85 m (door open) Weight: Approx. 2.2 t

Condition: used, functionality: fully functional, machine/vehicle number: F35CV, Subscrisa, DDG INSOLVENCY I.P.U.R.L., cu sediul în Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj, CIF RO27987796, nr. matricol: 2A0522, prin practician în insolvență Godorogea Daniel-Lucian în calitate de lichidator judiciar al societății ELEMENTO MOBILI S.R.L. - în faliment, in bankruptcy, en faillite, cu sediul social în mun. Dej, str. Dumbrava Roșie, nr. 6, et. parter, ap. 1, jud. Cluj, înregistrată la Registrul Comerțului de pe lângă Tribunalul Cluj, sub nr. J12/2389/2016, cod unic de înregistrare 36225390 desemnat în această calitate prin Încheierea Civilă nr. 1278 din data de 03.07.2025 pronunțată de Tribunalul Specializat Cluj în dosar nr. 442/1285/2025, organizează licitație publică cu strigare, cu preț în urcare, pentru vânzarea bunului identificat in prezentul anunt. Prima licitație va avea loc la data de 11.02.2026 la ora 15:00, la sediul DDG Insolvency I.P.U.R.L. din Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj. În caz de neadjudecare licitația se repetă în data de 18.02.2026, 25.02.2026, 04.03.2026, 11.03.2026, 18.03.2026, în aceleași condiții și la aceeași oră. Iodpfxeyfmtmj Abcsap În vederea vizionării bunurilor, lichidatorul judiciar va stabili o zi de vizionare în data de 04.02.2026 între orele 10:00-14:00. Cei interesați de vizionare sunt invitați să contacteze lichidatorul judiciar și să își exprime intenția de participare, anterior datei stabilite. În caz de adjudecare, lichidatorul judiciar va emite factura fiscală pentru contravaloarea bunurilor adjudecate. Conversia prețului în lei se va realiza la data emiterii facturii fiscale, utilizând cursul de schimb stabilit de BNR pentru acea dată. Pasul de licitație este de 5% din prețul de pornire. Caietul de sarcini în vederea participării la licitație va fi întocmit de către lichidatorul judiciar în concordanță cu uzanțele în materie, va conține regulamentul de participare la licitație și se va valorifica de către practicianul în insolvență, la prețul de la prețul de 500 lei+TVA. Acesta poate fi achiziționat de la sediul lichidatorului judiciar, sau telefonic urmând a fi transmis participantului prin e-mail. Garanția de participare la licitație va fi în cuantum de 10% din prețul de pornire. Aceasta împreună cu documentația de înscriere la licitație vor trebui depuse cu cel puțin 24 de ore anterior datei licitației la sediul lichidatorului judiciar. Garanția de participare la licitație va fi dedusă din prețul bunurilor pentru care participantul a fost declarat adjudecatar și va fi restituită persoanelor care nu au fost declarate adjudecatari. La preț egal, va fi declarat adjudecatar persoana care se va angaja să achite întregul preț în termenul cel mai scurt. Termenul de plată al prețului va fi de 5 zile lucrătoare de la momentul adjudecării. În cazul în care nu se va achita și restul de preț, adjudecatarul va pierde avansul achitat cu titlu de garanție și nu va mai putea participa la următoarele licitații care se vor organiza.

Condition: used, Year of construction: 2017, Overview  The Tecnoimpianti MINI STAB 300 SINGLE is a compact system for the acid stabilization of must and wine using the ion exchange process. It was built in 2017 by the Italian manufacturer Tecnoimpianti Water Treatment S.r.l. and was rarely used by the original owner and is now being sold due to a change of ownership. The machine is therefore in very good condition and available immediately. It is ideal for wineries, breweries or the production of carbonated beverages. Technical details Capacity: approx. 300 l/h Area of application: Acidification / stabilization of must and wine Process: Ion exchange with strongly acidic cation exchange resin Compressed air requirement: min. 6 bar Power supply: 400 V / 3 Ph + N / 50-60 Hz Installed power: 3.2 kW Operation: Touchscreen HMI Protection class: IP65 Compressor tank: 400 L, 3 bar operating pressure Certification: EU-compliant / CE Special features Fully automated process control Precise pressure and temperature control Stainless steel construction (hygienic & durable) Plug-and-play system with touchscreen Built-in nitrogen feed Effectively reduces potassium bitartrate formation Iodpowm Rfksfx Abceap

Year of construction: 1999, condition: excellent (used), We are offering a Heizbosch natural gas boiler. Type LLR 4000 Boiler with a 4 MW output Iodoxxa Ivepfx Abceap Year of manufacture: 1999 Flow temperature: max. 120 °C, Pressure: max. 6 bar Water capacity 5720 l It has only been used very rarely, primarily for cleaning two adjacent biomass boilers.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) - Configuration: 20‑cylinder, spark‑ignited gas engine - Fuel: Natural gas - Year: 2013 Ijdpeygx Tzefx Abcsap Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA - Year: 2013 Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit - Thermal Output: 2,719 kW - Year: 2013

Condition: excellent (used), Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, Bosch CHP Complete System (1 Set) – CHP CE 140 N (Year 2016) including Cabero Heat Exchanger/Dry Cooler (Year 2017) For sale is 1 complete, homogenous CHP unit consisting of 1× Bosch CHP Module CE 140 N (gas-powered CHP) including the corresponding peripherals as well as 1× Cabero heat exchanger/dry cooler. The unit is operational and in very good condition. Sale only as a complete package. 1) CHP / CHP Module Manufacturer: Bosch KWK Systeme GmbH Model: CHP CE 140 N Year of manufacture: 2016 Engine: MAN 2867 E 218 (gas-powered Otto engine) Performance data (CE 140 NA / typical as per datasheet series): Electrical output (nominal, 90/70°C): 70 – 140 kWel Thermal output (nominal, 90/70°C): 106 – 212 kWth Iedpoycl Absfx Abcjap Gas input: 192 – 384 kW Modulation range: 50 – 100 % Net efficiency: electrical 36.5 %, thermal 55.2 %, total 91.7 % Power supply: 400 V / 50 Hz, 3-phase Own energy consumption (electrical): 2,500 W Max. operating pressure (heating circuit): 6 bar Acoustics / emissions (CE series): Module noise level: 71 dB(A) NOx (dry, 5% O₂): ≤ 0.250 g/Nm³ CO (dry, 5% O₂): ≤ 0.300 g/Nm³ Dimensions (CE 140 NA – indicative values): Width W ≈ 1,160 mm Length L ≈ 3,850 mm Required room height min. ≈ 2,900 mm Wall clearance A > 900 mm 2) Cabero Heat Exchanger / Dry Cooler (1 unit) Manufacturer: Cabero Designation / Item No.: GCDD099MB-2X7-64-S D (EB) EC AXI A Version / Standard: PED / DIN EN 14276-2:2011 Year of manufacture: 2017 Heating surface: 2,742.65 m² Medium: Ethylene glycol 34% / Water 66% Fluid Group: 2 Max. allowable pressure (PS): 12 bar Test pressure (PT): 17.16 bar Permitted temperature range (TS): −40 / +60 °C Volume: 439.5 L Pressure test date: 03./04.07.2017

Condition: used, tank capacity: 565 l, GENERAL Equipment: Ventilation/air outlet, ball valve Design: Container Remarks: Frame, Fe (galvanized); External diameter: 1,080 mm Internal diameter: 1,077 mm Total width: 1,121 mm Total height: 1,041 mm Total length: 1,121 mm Heating/Cooling: present Iaodpfjyck Agjx Abcjp Location: Outdoor storage Technical documentation: Drawing Nameplate: Volume: 565 liters Cylinder wall thickness: 1.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: unused Cylindrical height: 500 mm TANK Base design: Frame HEATING/COOLING JACKET Internal temperature control: Immersion heater EQUIPMENT Manhole / dome: in the top head (DN 400) Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Feet material: steel