Used Heated for sale (15,210)

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Todpez D Ihfsfx Airjd

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included Todpfxswuqfyo Airod In excellent working condition

Condition: used, Year of construction: 2019, machine/vehicle number: 197341119, input voltage: 400 V, input frequency: 50 Hz, pressing force: 120 t, table width: 1,400 mm, table length: 3,200 mm, ITALPRESSE XL/8-S – water-heated platen veneer press Year of manufacture: 2019 Machine number: 197341119 Todpfxo Agxfge Airod Press area: 3,200 x 1,400 mm Pressing force: 120 tons Heating: Water Electrical connection: 400 V / 50 Hz Hydraulic veneer press with control unit and hydraulic unit as shown in the photos. Press area and pressing force according to the delivery note; year of manufacture and machine number according to the nameplate. Location: Basel area, Switzerland. Inspection possible until the beginning of December 2026 by appointment. Dismantling and removal between December 8th and 18th, 2026, after coordinating a date. Price upon request. Scope of delivery and current operational condition will be determined after consultation. Subject to change and errors.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, heat output: 34 kW / 29,900 kcal/h heating capacity: 29 kW / 25,000 kcal/h Todpfe Adtbdjx Airjd air flow rate: 2200 m3/h fan electrical power: 0.15 kW fuel: solid fuel of wood origin 170 kg year of manufacture: 2005 CE marking 220 V length: 90 cm, width: 56 cm, height: 155 cm

Condition: used, 26,2m3 heated tank with a connical bottom. Tjdpfxjun Nvbs Aired Diameter: 3.50m Total height: 3.70m The tanks have been used to store wine.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: AA2328995, total height: 2,495 mm, total width: 2,280 mm, total length: 10,500 mm, overall weight: 6,000 kg, Equipment: documentation/manual, For sale is a dry cooler (air-cooled liquid cooler with forced convection) designed for outdoor installation. Air is passed over the finned heat exchanger, which contains the working fluid, for example, a water-glycol mixture. Alfa Laval VDDSE1008.1CD96 C4 ICM Dimensions approximately 10.5m x 2.28m x 2.95m (no heavy-duty transport required for transportation) Weight approximately 6 tons Cooling capacity 866.8 kW Airflow: 217476 m³/h Volume flow rate of cooling medium: 150.8 m³/h A cooling unit is being sold – it has already been dismantled and is ready for loading. Tedpfx Asz S U Nasirjd If you are interested or have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete industrial Aagaard/Finnrose extraction and filtration system, built in 2006, from a wood processing company. The system is designed as a screw filter and includes a complete extraction control system with heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filtration system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Below the discharge, there is a suitable container with a volume of approximately 6 m³ on a mobile cart, which is included in the scope of delivery. The complete control cabinet for the extraction control system and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw and four cleaning groups, as well as a Schneider-Electric frequency converter for the extraction fan. Technical data Aagaard / Finnrose industrial extraction system / screw filter Year of construction: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions of filter elements: approx. length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for extraction control and heat recovery Frequency converter for main fan Heat recovery / return air system available 6 m³ container on a mobile cart included Existing steel substructure can be taken over Extensive existing pipelines available upon agreement Dimensions Filter tower incl. rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower incl. substructure: approx. 6,882 mm. Availability / Dismantling Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed no later than July 31, 2027. Dismantling, loading, transport and any customs clearance will be carried out entirely by the buyer at his own expense and responsibility. All necessary skilled personnel, lifting equipment, cranes and means of transport must be organized by the buyer. Inspection possible by appointment. Sale ex works in its current condition. Technical specifications provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Tsdsz Ik Atjpfx Airod Selling price: 19,500.00 EUR Price net, any statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: HZQJ240620819, type of input current: three-phase, overall weight: 3,500 kg, input voltage: 380 V, table width: 2,000 mm, roll diameter: 470 mm, product width (max.): 1,800 mm, working width: 1,900 mm, Hongzhong Sublimation Calender (Rotary Heat Transfer Press) For sale: Professional dye-sublimation/rotary heat transfer machine by Hongzhong Machinery. Designed for heavy-duty industrial operation, offering high efficiency, reliability, and precision. Key Features & Advantages: Tedpfoz Szc Hsx Aired Heating System: Thermal oil-heated drum system, ensuring uniform and stable temperature distribution across the entire cylinder surface. Control: Intelligent PLC touchscreen interface (WEINVIEW) with multilingual support and an over-temperature alarm. Functionality: Automatic felt/blanket tracking alignment and inverter-driven variable speed control. Safety: 4 emergency stop switches and an automatic cool-down function with auto shut-off once the temperature drops below 80°C. Applications: Ideal for the textile industry – supports both roll-to-roll continuous transfer and piece-by-piece (cut parts) production. Technical Specifications & Equipment: Power Supply: 3-phase (380V) Heating Time: Approx. 45 minutes Equipment: Heavy-duty work table, protective tissue/paper tensioning systems, and finished material take-up/rewind system. Easy to operate and maintain, engineered for long-term commercial use.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Type: OekoRona M Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Automatic biomass-fired heating systems Tsde Aba Rgopfx Aired Boiler output range Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Condition: used, Year of construction: 2015, operating hours: 38,000 h, functionality: fully functional, power: 70 kW (95.17 HP), 1. HKW Kuntschar + Schlüter GTK70 (70 kW electrical, MAN E0836E engine, year of manufacture 2015, in use from Q1 2020, approx. 38,000 hours, manufacturer overhaul, regular full maintenance by the manufacturer, maintenance documentation available for inspection, fully functional, out of service since 10/12/2026. Current maintenance is pending. 2. Gas condensing boiler Wolf MGK-2-470 (~200 kW real load, max. 467 kW, approx. 11 years old), used as a peak load boiler. 3. Buffer tank approx. 8,000 liters (with insulation, approx. 11 years old). Tjdpfsz Tdfgsx Aired 4. Expansion tank Reflex Type N600 (600 liters): On request: Soundproof enclosure (multi-layer panels, steel frame, approx. 60 m², outdoor installation, supply/exhaust air).

Year of construction: 2012, condition: good (used), Schraeder flue gas heat exchanger - used - year of manufacture 2012 - operated with a W&P Matador oven Tedpfe Agnkvsx Airsd - can be used with other bakery ovens - good technical condition - automation system available for the unit - collection from warehouse / shipping option available - price on request

Condition: good (used), Year of construction: 2019, heating cooling device GWK teco tt 50.08 WT2 300°C oil 8 kW year: 2019 Tjdpfx Ais Aba Eqsrod price: 4.200 € contact: Mr. Rainer Eckerle

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ Tsdpfx Aisz Hngmsrod • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 2009, power: 800 kW (1,087.70 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 11,700 kg, nominal power: 800 kW (1,087.70 HP), input frequency: 50 Hz, input current: 950 A, ambient temperature (max.): 30 °C, We are offering this used Jenbacher JMS 412 GS-N.TE combined heat and power (CHP) unit, manufactured in 2009. Type: JMS 412 GS-N.TE Serial number: 6289001 Year of manufacture: 2009 Rated power: 800 kW Power factor: 1 Maximum operating altitude: 150 m Maximum ambient temperature (intake air): 30 °C Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 950 A Weight: 11700 kg Performance class: G2 The unit was only operated at 555 kWh by the previous owner, but we used it at 800 kWh. According to the data sheet, it is designed for 800 kWh operation. We operated the unit with natural gas. We are selling the complete unit in a soundproof container, including the exhaust heat exchanger and chimney. If you have any questions or need further information, please feel free to send us a message or call us. Tedpfsz Ehc Esx Aired

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 Tsdezp Rmqspfx Airod - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Pressurized water temperature control unit, circulating process temperature control, heating unit, cooling unit, electric heating. SINGLE type STW 180/1-36-100-S Serial No.: 130569 Year of manufacture: 2013 Temperature max. 180°C Tsdpfj Agw Erjx Aired Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal filling volume) Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Circulating water supply + return DN 32 - G 1 1/4" Cooling water supply DN 20 G 3/4" Cooling water return DN 20 G 3/4" Connection power 41 kVA Rated current 57 A Control SC Standard type R8200-S-1-SI1-0-6 Mains connection 400 volts, 50 Hz, with 63 amp CEE plug - Temperature control - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Weight 200 kg Good condition

Year of construction: 2014, condition: like new (used), Heating tunnel for drying footwear. Tjdpfxoz Hw D Uj Airod

Condition: excellent (used), For sale is an industrial gas burner, Weishaupt WM-G10/3-A monarch®, in ZM design, complete with DUNGS gas fittings and accessories as shown in the pictures. With a thermal output of 100–1000 kW, this burner is suitable for installations requiring high performance, such as industrial boiler rooms, heating and process boilers, after selecting the burner according to the equipment's parameters. A key advantage of this offer is the extensive range of included equipment: in addition to the burner, you also receive a double gas valve DUNGS DN65, a pressure regulator, flange components, and a Weishaupt control panel. The entire set is sold in the configuration shown in the photographs. Burner data from the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Model: WM-G10/3-A Design: ZM Year of manufacture: 2010 Serial number: 5970155 Type of gas indicated on the nameplate: N Thermal output range: 100–1000 kW Gas connection pressure range: 15–500 mbar NOx class: 2 Main power supply: 400 V, 3~, N, PE, 50 Hz Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Tjdpfoz Spgpsx Airsd Country of manufacture: Germany CE marking: CE-0085BQ0027 Fittings and equipment shown in the pictures: Double gas valve DUNGS DMV 5065/12 Nominal valve diameter: DN65 Maximum valve pressure: 500 mbar Valve catalog number: 245099 Valve marking: class A, group 2, EN161 Gas pressure regulator Presostat DUNGS GW 50 A2 Weishaupt / Berger Lahr STE 50 actuator, 24 V DC power supply Weishaupt control panel with display Manometer Tubular elements, flanges, connectors, and wiring shown in the pictures Condition and scope of sale: The unit has visible signs of use, dirt, and localized corrosion on the steel components. The pictures show the actual item offered and serve as the basis for determining the scope of delivery. This offer includes the burner together with the shown accessories. Selection for a specific boiler, installation, and adjustment should be entrusted to a gas burner service company.

Condition: excellent (used), For sale: an industrial gas burner, Weishaupt WM-G10/3-A monarch®, ZM version, from 2011, complete with DUNGS gas valves and accessories as shown in the photos. The burner’s thermal power range is 100–1000 kW, and its German manufacture and extensive valve set are the key advantages of this offer. This burner is suitable for industrial boiler rooms, as well as heating and process installations – after being adapted to the boiler and gas installation parameters. The offer includes not only the burner but also a double gas valve, a pressure regulator, a gas filter, pressure switches, and connecting elements. The exact scope of the sale is visible in the photographs. Burner technical data – according to the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Model: WM-G10/3-A Todpfoz Spgvjx Aired Version: ZM Year of manufacture: 2011 Factory number: 40018116 Gas type – designation on the nameplate: N Thermal power: 100–1000 kW Gas connection pressure: 15–500 mbar NOx class: 2 Main power supply: 400 V, 3~, N, PE, 50 Hz Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Designation: CE-0085BQ0027 Country of manufacture: Germany Gas valves and accessories: DUNGS DMV 525/12 double gas valve Maximum pressure: 500 mbar Class: A, group 2 Standard indicated on the nameplate: EN 161 DUNGS catalog number: 255248 DUNGS FRS 520 gas pressure regulator Maximum inlet pressure: 500 mbar Output pressure range indicated on the label: 5–20 mbar DUNGS catalog number: 223382 Weishaupt article number: 640679 Weishaupt 520/1 gas filter Connection: 2″ Maximum working pressure: 0.5 bar Designation: CE-0085AS0538 Other equipment visible in the photos: DUNGS GW 50 A5/1 gas pressure switches Pressure switch mounted on the burner Pressure gauge Control actuator Burner head assembly with electrodes and cables Pipe elements, elbows, flanges, and fittings Wiring and connecting plugs Condition and scope of delivery: Used burner, with visible signs of use and storage. The elements have some dirt and localized corrosion marks. The photos show the actual item being offered.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,613 h, functionality: fully functional, machine/vehicle number: B4/19-002/LV, total height: 2,591 mm, total length: 2,990 mm, total width: 2,438 mm, fuel: liquefied natural gas (LNG), overall weight: 5,000 kg, type of cooling: water, empty load weight: 4,900 kg, Equipment: documentation/manual, As part of the demonstration, the compression in all cylinders can be shown to be 15 bar. Electrical power – 50 kWe Thermal power – 80 kW Gas consumption – 14.6 Nm3/h Engine manufacturer – MWM Number of cylinders – 4 Generator manufacturer – Marelli Type – MJB 225 SA4 Power – 62.5 kVA Rated power – 50 kW Tedpfsz Rxgyox Aired Frequency – 50 Hz Voltage – 400 V

Condition: good (used), Year of construction: 1997, functionality: fully functional, We are offering a boiler from the renowned company Urbas. Tedpfxszvxv Tj Aired The boiler has a heating output of 500 kW. Type: UR-RR-500. The boiler burns biomass (Bark, wood chips, and sawdust). Year of manufacture: 1997 Wiring, complete valve and pump set included. Multicyclone. Excellent technical condition. Optionally, for an additional fee, the boiler is available with a movable floor and chimney.

Condition: used, Year of construction: 1994, nominal heat output: 600 kW (815.77 HP), temperature: 95 °C, Equipment: hot water, For sale: Mawera Type FU600RA wood-fired boiler, manufactured in 1994. Todsz Eg Srspfx Airsd Accessories included: all fans, flue gas cyclone, exhaust pipes, control system, and feed motor with a short screw conveyor. The fireclay lining has been renovated by a specialist company. The boiler has been dismantled and is available immediately. The boiler can be operated with wood chips and pellets.

Condition: used, LÁNG Scraped Surface Heat Exchanger with Electric Motor Drive, Rotary Heat Exchanger, Scraper Blade Heat Exchanger, Used Equipment Manufacturer: LÁNG Engineering Works Co., Budapest, Hungary Type / Professional Term: Scraped Surface Heat Exchanger / Scraped Wall Heat Exchanger Serial No.: 11423 Year of Manufacture: 1980 Overall Dimensions (Width x Depth x Height): 2480 x 600 x 1300 mm Weight: 354 kg Heating Space / Jacket Working Pressure: 3 kp/cm² Heating Space / Jacket Testing Pressure: 4 kp/cm² Liquid Space / Process Fluid Zone Working Pressure: 5 kp/cm² Tjdpfxs Afunus Airjd Liquid Space / Process Fluid Zone Testing Pressure: 6 kp/cm² Internal Structural Elements and Drive: Scraper Blade Screw / Scraper Augering Element Drive: Electric motor drive with V-belt transmission

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, Nominal thermal capacity of 2.900.000 Kcal/h. Effective capacity on exit is 2.400.000 Kcal/h. Todpfx Ajz Sy Rieirod Feeding system and container for wood chips were bought in 2012. It has in total worked for 5 years, while feeding system and container or wood chips had worked for 2 months. Feeding system is with screw conveyor.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0021-0023, power: 895 kW (1,216.86 HP), heating capacity: 895 kW (1,216.86 HP), temperature: 120 °C, pressure: 6 bar, Low-temperature heating boiler, Viessmann Vitoplex 100, 895 kW. Todpjz T Unfjfx Airsd