Used Speedmaster 52 for sale (3,514)

Condition: as good as new (ex-display), Year of construction: 2021, Working width: 520 mm Planing shaft: tersa Number of knives: 4 Dressing table length: 2720 mm Adjustment dressing table: Lever Hollow point adjustment: no Gap removal display: Scala Hollow pointed joint display: - Ksdogr Udvepfx Adwowt Dressing stop angle adjustable: yes Motor power: 7 kW Machine length: 2800 mm Machine width: 1000mm Weight: 870 kg

Condition: good (used), Year of construction: 2009, functionality: fully functional, The machine is fully operational and equipped with an MB CAS AM52 delivery table (short). In continuous use. Kjdpfexcwb Uox Adwswt

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Heidelberg Sm 52-4 Kodpfjxr Rpdjx Adwowt Year 2015 Autoplate Automatic wash-up devices Alcolor dampening system Press Center Approx. 78 million impressions

Condition: ready for operation (used), Year of construction: 2012, input voltage: 380 V, Description about the machine: 2-sided, sheet fed, thin film, thermal laminator for short runs Max sheet size: 53 x 75 cm Min sheet size: 32 x 22.5 cm Max speed: 25 m/min Kjdjwrxqlepfx Adwewt 135 gsm to 450 gsm Quick make-ready Easy operation Small footprint Heavy-duty build quality Feeder Heidelberg-Stahl suction drum Bottom separation, continuous run, top loading Air inflates the sheets from the sides, allowing them to float on a bed of air Operator replenishes sheets on the run, thus providing continuous feed Laminator Electrically heated laminating roller Digital temperature controls up to 120°C (248°F) Rubber counter-pressure roller Choice of manually adjustable hand-cams or pneumatics for nip pressure Film mounted on a quick-change bar Film roll perforating mechanism Sheeter Integral steer & pull separator runs in-line Features include in-feed hold rollers, adjustable anti-curl bar, and variable speed belts Delivery into vibrating jogger table with under-sheet adjustable air control Perfector Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes electrically heated Additional heated roller, quick-change bar, and perforating mechanism for 2nd roll of film

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 220 h, load capacity: 3,500 kg, lifting height: 5,500 mm, free lift: 2,150 mm, fuel type: diesel, mast type: triplex, construction height: 2,875 mm, power: 41 kW (55.74 HP), fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Triplex Transmission: Torque converter Condition: Ready for operation and fully functional Technical condition: very good Front tyre type: super elastic Rear tyre type: super elastic Ksdpfjxmb Umex Adwewt Description: AS NEW CONDITION!!! Side shifter, fork positioner, 3rd valve, 4th valve, front work lights, heater, full cab, full free lift, CE certificate, scale, LED.

Condition: used, Year of construction: 1997, machine/vehicle number: 97989, Schwertfalzwerk - Mobile Folding Knife Stahl VFZ 52.DFour-directional folding unit - Vierbruchfalzwerk Year 1997 - Serial-No. 97989/97-255056 Sheet Size min 120 x 100mm - max. 520 x 360mm Speed max. 160 m/min. Cycle Rate max. 30000cycle/hour Kwedpfxjll A Tie Adwet Infeed high 515 - 915mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2001, machine/vehicle number: 703796, Vierbruchfalzwerk Schwertfalzwerk / Mobil Knife Folding Unit Heidelberg VFZ-52.DFour-directional folding unit - Vierbruchfalzwerk Baujahr / Year 2001- Serial-No. 703796-297059 Kwodpfx Aorcnrusdwst Format / Sheet Size min. 120 x 100mm Format / Sheet Size min. 520 x 360mm Geschwindigkeit / Speed 25 - 160 m/min Taktzahl / Cycle rate max. 30.000(T/h) Einlaufhöhe / Infeed height 51,5 – 91,5cm Schwertposition / Knife position 180° schwenkbar / 180° pivotable zum Anschluss an Maschinen mit DCT Steuerung / to connect on machines with DCT Control Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1996, condition: used, machine/vehicle number: 18073, Abwickler - Unwinder Stralfors Lasermax UW 52 (18073)Year 1996 Online-Video-Inspection by Skype-Video Kwodpfx Adjh Axqqewet We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Altarfalztaschen (Fensterfalztaschen) / Gateway Buckles Stahl 52 - 66 - 66 - 78 - 94XX014 - Altarfalztaschen (Fensterfalztaschen) mit Steuerung / Gateway Buckles with Control box for Stahl-K-T-78 XX016 - Altarfalztaschen (Fensterfalztaschen) mit Steuerung / Gateway Buckles with Control box for Stahl-66 XX123 - Altarfalztaschen (Fensterfalztaschen) mit Steuerung / Gateway Buckles with Control box for Stahl-K-T-66 XX133 - Altarfalztaschen (Fensterfalztaschen) mit Steuerung / Gateway Buckles with Control box for Stahl-K-T-52 XX188 - Altarfalztaschen (Fensterfalztaschen) mit Steuerung / Gateway Buckles with Control box for Stahl-K-T-94 Pressluftanschluss / Air supply 6 bar Kodpferffmpsx Adwjwt Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1988, machine/vehicle number: 1001871, 1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Shinohara Fuji 52 N+PYear 1988 - Serial-No. 1001871 Size min. 105 x 148mm - Size max. 360 x 520mm Paperweight 0.04 - 0.4 mms Dampening system conventionel Kwedjh Aw T Ujpfx Adwjt Plus Version Numbering and Perforation Unit Powderspray Quick clamp plate change Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1990, machine/vehicle number: 35381, Schwertfalzwerk - Mobile Folding Knife Stahl VFZ 52Year 1990 - Serial-No. 35381-145531 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Ksdpfxoh R D Sbs Adwewt

Condition: used, Year of construction: 1997, machine/vehicle number: 201189, 2 Color Sheet-Fed Offset Press Heidelberg SM52-2Baujahr / Year 1997 - Serial-No. 201189 Druckzahl / Impressions 47 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration Kwodjl Ti Dpjpfx Adwet CP-Tronic Autoplate Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2010, 530 x 740 mm (20×29″) approx. 176 million prints PressCenter AxisControl Alcolor Autoplate extended delivery Kwodsp Ugwtopfx Adwst Autom. Ink roller washing device, automatic blanket washing device, automatic counter-pressure washing device high pile delivery separate coating unit with chamber doctor blade system IR dryer, AirStar, inking unit temperature control perfecting 2/3 antistatic device scale feeder powder device, available at short-notice

Year of construction: 2025, condition: new, functionality: fully functional, New machine 2 year warranty available in 4 different versions, cutter heads also interchangeable Advantages: + unbeatable price-performance ratio + Already standard: mobile machine, ideal for quick floor mopping Kwsdpjivdm Usfx Adwst + Stainless steel blades + Quickly replaceable, coated cutter head + up to 4 different cutter heads can be used with one machine + extremely wide weight range (16 gr - 400 gr round knives possible!) + even dividing of the dough, excellent rounding of the dough pieces + effective switch-off at the touch of a button + Ergonomic knife cleaning position (head can be swiveled forward by 90 degrees) + Kneading cut-off, pressing time and duration programmable + Digital display, 10 programs can be saved + Quick and easy adjustment of the height of the knit chamber + lateral holder for the knit plate, immediately at hand SERIES accessories: 3 knotting plates included General technical data: Power: 1.3 kW Connected loads: 400V - 3Ph - 50Hz Fuse protection: 16A-CEE plug Dimensions: 60 x 63 x 175 cm (WxDxH) Net weight: 380 kg Size 3-52: Number of pieces: 52 dough pieces Piece weight: 16 - 45 grams (depending on dough) Dough filling: 832 - 2,340 grams (depending on dough) optionally available: - additional kneading plates Surcharge: 110,-- € net / pc. - Additional cutterhead (incl. 3 cutting discs) Surcharge 1.750,-- € net / set

Condition: used, Year of construction: 1999, grinding diameter 360 mm grinding length 650 mm centre height 180 mm Kedot Hw A Hspfx Adwowt Control SIEMENS 840 D total power requirement 15 kW weight of the machine ca. 9500 kg dimensions of the machine ca. m

Condition: used, machine/vehicle number: 12768, Rotor diameter: 340 mm Rotor width: 520 mm 4-knife rotor Kwjdol U Hbdjpfx Adwot 2 rows stator knives Inlet cross section approx. 340 x 520 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 11648, Roller feeder on the hopper Rotor blade rows: 3 Stator blade rows: 2 Rotor width: 520 mm Rotor diameter: 340 mm Kjdpjghgqpsfx Adwowt Inlet dimensions: 500 x 350 mm

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Kwsdpjvwflbefx Adwot

Condition: new, Year of construction: 2024, ZŁOMIARZE Recycling Technology MCW 52/76 Shredder Kwsdshix Hropfx Adwot The MCW series quad shaft shredder is based on many years of experience in the plastics and scrap industry. MCW Shredder is a highly reliable, universal pre-shredder for shredding a wide range of materials such as plastics, materials, rubber, wires, electronic scrap, post-production waste as well as slight magnetic materials. Types of MCW Shredders: MCW-52 Technical Specification: • Motor output – 22 kW • Cutting Chamber – 510 × 760 mm • Performance – approx. 400 kg/h (depending of material type) • Weight – approx. 1400 kg MCW-76 Technical Specification: • Motor output – 37 kW • Cutting Chamber – 965 × 780 mm • Performance – approx. 800 kg/h (depending of material type) Additional equipment: • Loading belt conveyor • Dust Extraction • Magnetic Plate with Quick Clean System • Magnetic Separator SM-370 • Unloading Belt Conveyor Contact us for more information!

Condition: used, slot-milling length 300 mm groove width 34 mm Ksded Ih Uiepfx Adwowt flute depth mm cutting speed 6 m/min return speed 6 mm/min clamping plate 380 x 300 mm weight of the machine ca. 285 kg dimensions of the machine ca. 590 x 1150 mm Bore-Ø min.: - with spezial knifes: 6 mm - with ram inserts: 20 mm - with normal bumper: 40 mm Electromagnetic Brake with various accesssories (see pictures)

Condition: good (used), Year of construction: 2002, Alup SCK 52-10 Screw Compressor Kwsdjwld Uvjpfx Adwst Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped. Discharge pressure: 10.00 bar Motor power: 37.00 kW Free air delivery: 5.15 m³/min

Condition: used, Year of construction: 1997, 1997 Stahl 52-4 Folder with marking unit MKE-66, year 1999 4 buckles downstream cutter Kedohwiqwepfx Adwjwt short-term available

Condition: used, Year of construction: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Unit rated 9,3 kh/hour water evaporation capacity at 350°C maximum air inlet temperature. Drying tower has diameter approx. 1000 mm x 700 mm height of straight side x 1100 mm conical height. Includes (1) rotary atomiser CMT model AF07 driven by 0.7 kW IBAG motor, diameter of wheel 63 mm, speed range 10.000 - 60.000 rpm. Unit also includes 12 kW electrical air heater, cyclone, fan and main switchboard with integrated control panel. Ksdpfxjuk Ehxe Adwewt

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 35133, infeed width: 520 mm, GUK K 52/6-KTL-F4 folding machine with Gremser flat pile feeder. 6 pockets, then 2 knives and one additional pocket. Paper size: max. 52x86cm Speed: 30-150 m/min with belt delivery and compressor. In working order, ready for testing. Kjdpfxswl Nifs Adwjwt

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 0103, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 635 mm, table length: 1,020 mm, table width: 860 mm, No reserve price – guaranteed sale to the highest bid! TECHNICAL DETAILS Worktable Table length: 1,020 mm Table width: 860 mm Max. workpiece weight: 800 kg Travel Longitudinal travel (X-axis): 900 mm Cross travel (Y-axis): 600 mm Vertical travel (Z-axis): 635 mm Spindle Spindle taper: ISO40 Quill feed (Z-axis): 200 mm Distance table to spindle: 15 – 850 mm Spindle speeds: 10 – 2,500 rpm Table feed rates: 5 – 5,000 mm/min Quill feed steps: 6 Quill feed per revolution: 0.03 mm/rev to 0.33 mm/rev Distance between columns: 950 mm Control: Heidenhain ITNC 320 Kwsdpfxowzxl Us Adwst MACHINE DETAILS Voltage: 50 Hz 3×380 V Connection: 50 Hz 3×380 V Spindle motor: 4.5 kW Power requirement: 10 kVA Dimensions & Weight Dimensions: 2,930×2,370×2,690 mm Weight: 6,500 kg