Used Speedmaster 52 for sale (3,644)

Condition: used, Three-phase motor, electric motor -Manufacturer: Volta, electric motor from guillotine shears Stankoimport 3218 -Type: AOC2-52-6 - C1 -Power: 9 kW -Speed: 890 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 Lrjdpfxegzwx Eo Aqvjl -Dimensions: 570/370 / H315 mm -Weight: 112 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 26/52 rpm -Power: 0.21/0.28 kW -Diameter shaft: Ø 25 mm -Construction: B3 -Protection class: IP 54 Ledpfx Aqsd N E Ntevsrl -Dimensions: 452/114/H215 mm -Weight: 16 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 52 mm -Type: Mubea 52 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 125 mm Lrsdpfx Aqjiqhh Ievsl -Weight: 6,8 kg

Condition: good (used), Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation Lsdpfx Asw Uvv Ajqvorl -Wheel: Rail width intermediate dimension 52 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1 piece available -Dimensions: 220/123/H160 mm -Weight: 9 kg

Condition: good (used), three-phase motor, electric motor -Handover: in current condition as viewed -Note: the base of the engine has been welded once -Power: 52/143 kW -Speed: 1485/2970 rpm -Shaft conical: Ø 70 to 60 mm 125 mm long Lrjdod E Tfrepfx Aqvsl -Design: B3 -Protection class: IP 54 -Dimensions: 1130/920/H630 mm -Weight: 876 kg

Condition: excellent (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Ecoair, Air Oil Separator Filter Type N 2785000 / 49 302 52 171 Lsdpfswbzzxsx Aqverl -Inside/outside: Ø 110/170 mm -Bolt circle: Ø 210 mm -Quantity: 1x air filter available -Dimensions: Ø 245 x 420 mm -Weight: 3.4 kg.

Condition: used, Servo motor, electric motor, DC motor, servo gear motor -Manufacturer: Dunkermotoren, servo geared motor -Type: BG 45x30 BGE45CI -Voltage: 24V -Speed: 3360 rpm Lrsdpfx Asfi Tu Usqvol -Gearbox: PLG 52 i = 64:1 -Shaft: Ø 12 x 20 mm -Dimensions: 230/61/H61 mm -Weight: 1.8 kg

Condition: good (used), Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger Ljdpfx Ajdfglksqvsrl -Stuffing box: made of stainless steel -Stuffing box: for Ø 50-52 mm shaft -for gland tape -Number: 8x glands available -Price: per piece -Dimensions: 144/144/H68 mm -Weight: 2.9 kg

Condition: used, Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding bend, pipe angle -Pipe elbow: welding elbow 90° 45° 0° 590 pieces -Type: 52 different versions, see photos/parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H400 mm Ljdpfsq N E R Hex Aqverl -Weight: 322 kg

Condition: good (used), Pressing tool, sheet metal former, forming tool, bending tool, folding tool, bending tool, die, die-casting tool -Bending tool: Pressing tool for press brake / press, 5 pieces -Length: 2x 300 mm / 1x 275/200/175 mm each -Groove width: 58/52 mm -Angle: 90° Dimensions: see photos / technical drawing Lrjdpfx Ajv Szbhjqvel -Price/Fee: complete -Transport dimensions: 450/300/H115 mm -Weight: 48.3 kg

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: MING11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 18,000 mm, total width: 2,000 mm, total height: 3,000 mm, axle spacing: 1,500 mm, load capacity per stand: 7,000 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Cantilever racking, long goods racking, heavy-duty racking - double-sided Consists of 13 uprights + 52 cantilever arms Height 3m - uprights IPE200 - upright spacing 1.5m center-to-center Total depth 2m (both sides) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7000kg Lodpfxov Smr Ss Aqvsrl Arms are continuously adjustable Including crossbars from arm to arm, including wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 232 h, load capacity: 3,500 kg, lifting height: 5,500 mm, free lift: 2,150 mm, fuel type: diesel, mast type: triplex, construction height: 2,875 mm, power: 41 kW (55.74 HP), fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load centre: 500 mm Mast type: Triplex Transmission: Torque converter Condition: Ready for use and fully functional Lrjdpfx Aow Dk Dzeqvsl Technical condition: Very good Front tyre type: Superelastic Rear tyre type: Superelastic Description: AS NEW CONDITION!!! CONDITION AS NEW!!! Sideshifter, fork positioner, 3rd valve, 4th valve, front work lights, heater, fully enclosed cabin, full free lift, CE certificate, scale, LED,

Condition: good (used), servo motor, electric motor, DC motor, stepper motor, stepping motor, compact asynchronous motor -Manufacturer: phytron, stepper motor type ZSS 52-200-2.5 25:1 Ljdpjvrdmtefx Aqvsrl -Manufacturer gearbox: Gysin type GPL 052-2S/25-1 i 1/7 -Dimensions: Ø 82 x 185 mm -Total weight: 2.9 kg

Condition: used, mileage: 8,06,114 km, power: 260 kW (353.50 HP), first registration: 03/1998, fuel type: diesel, number of seats: 52, gearing type: mechanical, emission class: euro2, color: white, brakes: retarder, Year of construction: 1998, Equipment: ABS, bathroom, parking heater,

Condition: used, Year of construction: 1991, working area 225 mm table-size L:550 mm table-size B:200 mm sanding disc diameter 200mm mm magnetic plate size 500 mm weight of the machine ca. 1,8 t Lrsdpfx Aqjud Algovol dimensions of the machine ca. 2000x1600x2100 m

Condition: used, empty load weight: 6,600 kg, maximum load weight: 27,400 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 10/2009, next inspection (TÜV): 04/2026, total length: 25,500 mm, total width: 40,000 mm, total height: 1,16,600 mm, suspension: other, tire size: 385 / 65 R 22,5, Year of construction: 2009, front tire size: 385 / 65 R 22,5, rear tire size: 385 / 65 R 22,5, brakes: other, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW with disc brakes, air suspension, 3 storage boxes, spare wheel holder without wheel, own 24-volt hydraulics with NATO socket, ET0 alloy rims, hydraulic support at rear, maintenance walkway with foldable handrail, 4 Domdeckel covers Lsdpfxsynbwro Aqverl

Condition: good (used), Year of construction: 2009, functionality: fully functional, The machine is fully operational and equipped with an MB CAS AM52 delivery table (short). In continuous use. Ljdpjxcwb Usfx Aqvsrl

Condition: used, Year of construction: 2022, load capacity: 3,500 kg, lifting height: 4,340 mm, total length: 4,150 mm, Hersteller: Toyota Lodpfxjxd E Ifj Aqvsrl Antrieb: Diesel Bedienung: Sitz Tragfähigkeit/Last 3500kg Lastschwerpunkt 500 mm Lastabstand: 495 mm Radstand: 1700 mm Achslast mit Last vorn/hinten kg 7260/1100 Achslast ohne Last vorn/hinten: kg 1710/3150 Reifentyp - Luft (P), Superelastik (SE), Vollgummi (R): SE Reifengröße vorn 250-15 Reifengröße hinten 6.50-10 Räder, Anzahl vorn/hinten (x = angetrieben) 2x/2 Spurweite vorn mm 106 Spurweite hinten mm 965 Neigung Hubgerüst vor/zurück a/b Grad 6/11 Höhe Hubgerüst eingefahren mm 2115 Sitzhöhe mm 1120 Kupplungshöhe mm 335 Gabelträger FEM/ISO 2328, Klasse/Typ A, B IIIA Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4185 Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4385 Wenderadius mm 2490 Kleinster Drehpunktabstand mm 745 Fahrgeschwindigkeit mit/ohne Last km/h 16,5/17,0 Hubgeschwindigkeit mit/ohne Last m/s 0,37/0,40 Senkgeschwindigkeit mit/ohne Last m/s 0,50/0,45 Max. Zugkraft mit/ohne Last N 17000/10600 Steigfähigkeit mit/ohne Last % 18 Betriebsbremse Hydraulisch Arbeitsdruck für Anbaugeräte bar 147 Ölstrom für Anbaugeräte l/min 65-80 Schalldruckpegel nach EN 12 053, Fahrerohr dB(A) 79

Condition: new, Year of construction: 2025, Motorized thickness table hub with two speeds Numerical display for working height Thicknessing table in cast iron The thicknessing table is supported by four large trapezoidal thread spindles for maximum stability and precision Four speeds Optional with two roles in the thicknessing table Equipped with noise and chip protection curtain at the factory Tueckein and outlet Adjustable roll pressure Front feed roller with helical gearing Pull-out roller with rubber coating Powerful industrial motor Equipment details Ledpfx Ajd Hx E Ieqvorl Models TERSA with Tersa Planer knife shaft Planer blades change in seconds When starting the machine, the blades are automatically tensioned - self-arretierend by the centrifugal force The knife protrusion will automatically without the use of setting gauges Work table The working table is supported by four large trapezoidal screw spindles provide greatest stability under all operating conditions As standard with electric table adjustment The Special lifting device correctly maintain the table position, also without lock Helical steel feed rollers for a constant and uniform wood feeding Second, rubber feed roller in the spout Massive arrestors prevent kickback of workpieces A 4-meter shaft ensures an optimal planing image Dimensions and weights Length approx. 1170 mm Width/depth approx. 1003 mm Weight approx. 660 kg Connect dust extraction

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Ledpfx Aeff Hdpjqvsrl Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables made of one piece allow easy dressing of workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open to the rear, simultaneously, with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height On/off switch in operator position Powerful industrial motor Lsdpfxjff Hdme Aqverl The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thicknessi [...]

Condition: new, Year of construction: 2025, Large dressing tables made of grey cast iron The dressing table is adjusted via a precise parallelogram system so that the distance between the table tips and the cutter head remains the same in every adjustment position The large, stable dressing fence made of anodised aluminium is easy to move and can be tilted from 0° - 45 The inclination of the fence can be read from the workstation With auxiliary stop as standard Large four-blade shaft, precision bearing Smooth running due to precision unit and thanks to the heavy cast iron design Lrsdoff Efcopfx Aqvel Powerful industrial engine Highest possible user safety with simplest operation Display for chip removal via scale Manual table adjustment Motor protection switch Equipment details incl. fold-down auxiliary stop for narrow workpieces Manual quick adjustment of the chip removal with scale & clamping head The protection device The safety guard is foldable and designed to protect the operator without obstructing the work Models TERSA with Tersa planer knife shaft system No more adjusting and screwing Planer knife change in seconds Self locking Especially low noise Perfect planing result Dimensions and weights Length approx. 2750 mm width/depth approx. 1500 mm Weight approx. 680 kg Dresser Total length of the tables 2720 mm Feed table length 1498 mm Chip removal max. 8 mm Stop length 1200 mm Stop height 190 mm Swivel range of dressing stop 90 - 45 ° Dust extraction connection Suction nozzle diameter Thickness

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Equipment details: Work table Stored on four large screws, ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Lrodpfx Aqod Hx Hpjvol Motor thickness table height adjustment at 52 S elite s Height adjustment of the Thicknesser table motor with electronic number For greater precision and more ease of use Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight 455 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 7 main motor kW Installation information Space length 1440 mm Space potatoes

Condition: used, Year of construction: 1999, grinding diameter 360 mm grinding length 650 mm centre height 180 mm Control SIEMENS 840 D total power requirement 15 kW weight of the machine ca. 9500 kg dimensions of the machine ca. m Lrodpfx Aqet Hw A Hsvsl

Condition: ready for operation (used), Masterflex 7017-52, 7016-52,7017-21, 7016-20 Pump Heads for peristaltic pump. Price applies to one unit only. Tubing sizes: 7017-52 L/S16 - 2pcs avaliable 7016-52 L/S17 Ljdpfx Aqsxzft Ajverl 7017-21 L/S17 7016-20 L/S16 - 2pcs avaliable