Used Spiral Conveyor for sale (10,631)

Condition: excellent (used), Kemper Eco 50 Spiral Mixer For further information please send an message Ledpfx Askzkrhjbcohd

Year of construction: 2007, condition: used, Roll even end conveyor Ljdpsr Avnwefx Abcehd Lenght 5900 mm Width 1100 mm

Condition: used, Roller conveyor with chain cross conveyor Ljdpfxoi Sdk Ss Abcohd Can be used after resaw. - Electric motor: 1,1 kW - Electric motor: 0,75 kW - Electric motor: 1,1 kW

Condition: used, Length: 7,5 m Electric motor: 1,1 kW each rail Chain conveyor for board packs - Length: 7,5 m, Lodsmrzthjpfx Abcehd - Electric motor: 1,1 kW (each rail).

Condition: used, Capacity: 80 m/min Lhodpfeg S Dm Nox Abced Planer feed table, tested. At speeds up to 80 m/min.

Year of construction: 1995, condition: used, Water-based painting system complete with 865 linear meter chain with tracks, Sames reciprocators with rotating cups, generators, painting pumps, chart tables and accessories Lhjdpeit Rrvofx Abced

Condition: good (used), Dimensions belt: 2.960 length, 600 width, 1.030 heighth. Lhsdpfx Aotu Hhxebcod

Condition: excellent (used), REF: MM6212 1 X Large stainless-steel framed swan-neck elevator conveyor with flighted belt. Technical specification ⚙️ ✅ Belt width - 365mm. ✅ Infeed height - 550mm. ✅ Outfeed height - 2500mm. ✅ Overall dimensions - 4.3m long x 740mm wide x 2.6m high. Lhjdpfxexd U Ins Abcod

Condition: excellent (used), REF: MM6214 1 X Outfeed stainless-steel framed elevator conveyor. Technical specification ⚙️ ✅ Belt width - 330mm. ✅ Infeed height - 150mm. ✅ Outfeed height - 1050mm. Ledpsxd Uplsfx Abcohd ✅ Overall dimensions - 2000mm long x 600mm wide x 1140mm high. Note 🗒️ Previously used as outfeed from VFFS bagger.

Condition: like new (used), Year of construction: 2005, operating hours: 7,000 h, ONLY PRODUCED FOR 7000HRS Overall Belt width - 660mm Effective Belt width - 610mm Ljdpfxorfclqj Abcohd Belt length/Tier - 13.28 Effective Belt length - 478.08 Effective Belt area - 245.95m2 Tiers - 36 Tier pitch - 145mm Maximum product height - 73mm Drum Diameter 2905.76mm EVAPORATOR Duty - 210kw Evap Temp - -40c Installed power - 32.55kw Infeed Height - 800mm Outfeed Height - 6200mm Infeed/Outfeed Length - 200mm Full CIP covering all areas. Absolutely mint condition. GEA GRASSO PLANT COMPLETE WITH AIR COOLED CONDENSOR 240KW DUTY. AGAIN ONLY 7000HRS RUN TIME REVERSE CYCLE DEFROST AFTER 120HRS WITH WATER SPRAYBARS. More photos available through WhatsApp

Condition: excellent (used), 1 x Incline conveyor. Located Melksham. Lift out £30. UKFM1-6799 Ledpfexc H Nbsx Abcjhd

Condition: ready for operation (used), functionality: fully functional, A good used take off conveyor in stainless steel fitted with modular belt suitable for use with bagmaker to take filled bags and elevate up to working height - this conveyor is in stainless steel and it was designed and built to accept a metal detector if required (see metal free zone) - complete unit on lockable swivel castors with brakes - three phase geared drive motor with gearbox - modular belt with flights Ready to ship worldwide Ledpowucfrofx Abcehd Ask for more videos and pictures via Whats App Floor length - 2200mm Belt width - 300mm Infeed height to top of belt - 180mm Outfeed height - 1050mm

Condition: excellent (used), REF: MM6164 1 x Inclined conveyor with height adjustable feet, single-speed. Previously used as an outfeed conveyor for a VFFS bagging machine.  Technical specification ⚙️ Lhodew H I Agjpfx Abcjd ✅ Belt diameter - 2950mm long x 250mm wide. ✅ Infeed height - 350mm.  ✅ Outfeed height - 850mm.  ✅ Overall dimensions - 2950mm long x 450mm wide x 850mm high. ✅ Electric supply - 240 V / 50 hz / 1 phase.

Condition: used, Weber Loading Conveyor Model CZB Stainless steel Ljdsxtfz Rjpfx Abcshd

Condition: good (used), Saxon Bag Sealer Stainless Steel Lsdpjv Dm Dljfx Abcehd With Stainless Steel Conveyor 230 Volts Single Phase Power Height adjustable mast Mobile on castors Fixed adjustable feet also Conveyor belt dimensions 1500mm L x 400mm W

Condition: excellent (used), Year of construction: 2010, Converging Solutions Converging Conveyor Model: Integrator 3 Syncro Serial number: CS5653 Year of construction: 2010 230 V, 16 A Belt width: 680 mm and (6x) 320 mm Ledpjv Tx Uzefx Abcehd Clearance: 680 mm x 190 mm Total dimensions: 2280 mm x 850 mm x 1240 mm.

Condition: excellent (used), Converging Solutions converging conveyor Model: High Speed Variable speed control Lhsdpfx Aov Tz Tmebcod Serial number: 5054 Year of construction: 2002 240 V, 1 Ph, 50 Hz, 16 A Belt width: 625 mm and (3x) 135 mm Total dimensions: 1460 mm x 1000 mm x 1140 mm.

Condition: new, New Conveyor with overhead feeder hopper Lhedjwd Nthspfx Abcod Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Feeder hopper dimensions 800mm x 740mm x 600mm deep Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable VFD on conveyor drive

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, plate length: 2,800 mm, plate width: 1,300 mm, TECHNICAL DETAILS Max. panel width: 1,300 mm Max. panel length: 2,800 mm EQUIPMENT 180-degree panel tilting system The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. Lhsdpfx Aoyq E S Sebcsd External reference: 6327

Year of construction: 2006, condition: not inspected (used), functionality: unexamined, working width: 1,200 mm, working height: 1,600 mm, working length: 1,200 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lodeyqx Ugepfx Abcohd Maximum working width: 1,200 mm Maximum working length: 1,200 mm Maximum working height: 1,600 mm MACHINE DETAILS Total power: 1.5 kW EQUIPMENT CE marking, safety regulations The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection, and is responsible for the installation, securing, and operational use of the machine at the destination. External reference: 6724

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Lhedpfxeyu If Ns Abcsd MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Condition: good (used), max. wheel diameter 1600 mm gear width 250 mm max. module 30 min. module 8 range of tooth size 58 mm tooth width 250 mm weight of the machine ca. 42,3 t dimensions of the machine ca. 4,45 x 6,00 m - Cone spacing in mm. for spiral angle 30° Lhodpfx Asu Dbucobcsd minimum: 150 maximum: 800 - Taper angle, in degrees minimum: 5 maximum: 85 - Tooth angle minimum: 0° maximum: 45° - Number of teeth to be cut minimum: 10 maximum: 150 The machine is complete, fully functional and in good condition. Equipment / accessories: - complete set of change wheels - 4 pcs. cutter heads - various milling cutters - Operating instructions in English

Condition: good (used), Renz ABL-500 Automatic Spiral Binding Machine A powerful machine for the production of calendars, notebooks, and other metal spiral-bound products. The machine automatically feeds the spiral, cuts the spiral into pre-defined lengths, inserts the hanger, and clamps the binding. Max. feeder size: 500 x 700mm Min. feeder size: 70 x 135mm Max. thickness: 15mm Table with folded sheet feeder Lsdpeywdugsfx Abcohd Automatic hanger loading and mounting Automatic wire pick-up from the roll with wire spacer removal Closing module Delivery Central controller for the entire machine Capacity up to 2500 cycles/h 380V power supply + compressed air The machine has a central lubrication system. Weighs 1300kg Includes many additional components, tools, and documentation.

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. Lhjdpfx Abeywdrfjcjd The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg.

Condition: good (used), Rilecart R-500 Semi-Automatic Spiral Binding Machine Efficient semi-automatic machine for producing calendars, notebooks, and other metal spiral-bound products. The machine automatically feeds the spiral, cuts the spiral into pre-defined sections, inserts the hanger, and clamps the binding. Maximum binding width: 500 mm; minimum: 50 mm Automatic hanger loading and installation Capacity: up to 1500 cycles/h Lhedpfeywdntex Abcod Power supply: 230V + compressed air Made in Italy. Weight: 450 kg