Used Splinters Separator for sale (6,708)

Year of construction: 1980, condition: good (used), Oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 1615 2653 -Pressure: max. 11 bar -Dimensions: 315/200/H500 mm Ijdpfx Aszt I Rzehnjig -Weight: 22.2 kg

Condition: good (used), Year of construction: 2000, operating hours: 40,000 h, functionality: fully functional, track width: 3,000 mm, Equipment: crane, low noise, BZH sorting and cutting trolley. Track gauge: 3m. OBX 2 crane. Lifting capacity at 13.20m: 2200kg without grapple. Chainsaw on the right side. Crane positioned in front of the cab. Grapple. Ijdpfx Ahezycf Tsnjig Sold separately.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 21370-07-1268, functionality: fully functional, Available from April 1, 2027, for self-dismantling and self-collection. Langzauner heating press / veneer press, type LZT 100-SF, manufactured in 2007. The machine is suitable for pressing and gluing sheet materials, veneers, and comparable workpieces. It features heated press surfaces and a hydraulic pressing device. The upper and lower heating elements can be switched on separately. Technical data • Manufacturer: Langzauner Iedpfxsz Dai Ue Ahneig • Type: LZT 100-SF • Year of manufacture: 2007 • Factory number: 21370-07-1268 • Heating: upper and lower heating • Temperature display: separate for top and bottom • Pressing time: adjustable • Opening time: adjustable • Automatic opening: available • Electrical connection: 3 × 400 V + N • Frequency: 50 Hz • Rated current: 42.2 A • Connected power: approximately 27 kW according to the nameplate • Hydraulic press with 6 press cylinders • Safety cable / safety device • Press surface heating plates in top condition, no damage • Heating plate size: 3,000 × 1,300 mm • Max. press opening / stage clearance: 400 mm • Total pressing force: 100 tons • 6 press cylinders • Electric heating plates

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: C3030, type of input current: three-phase, total width: 1,900 mm, total length: 4,200 mm, input voltage: 400 V, input current: 50 A, feed length X-axis: 1,700 mm, feed length Y-axis: 1,700 mm, feed length Z-axis: 300 mm, working width: 1,700 mm, total height: 850 mm, repeat accuracy: 0.1 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 1 m/min, cutting width (max.): 1,700 mm, cutting height (max.): 80 mm, compressed air connection: 6 bar, Complete Textile Cutting & Spreading Equipment Line – KURIS, ZSK & MAYER – Automatic Cutter, Spreading Machines, Presses Professional textile production equipment available for sale, including automatic cutting systems, spreading machines, embroidery equipment, industrial presses, and accessories. All machines were used in industrial garment production and are available for inspection. Also available more than 200 sewing,ironing machines (Juki, Durkop Adler, Veit) Contact for more info. Location: Ruse, Bulgaria Delivery terms: EXW (Incoterms 2020) All prices are net prices (excluding VAT, dismantling, loading, and transport). Cutting Equipment 1 × KURIS C3030 Automatic Cutter KURIS automatic CNC textile cutting system. Like new condtion always serviced with original parts installed October 2019 Main Specifications Working width: 1700 mm Cutting height: up to 80 mm Automatic servo cutting system Vacuum table Industrial CNC control Suitable for textile and technical fabrics Set Price: EUR 45,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter KURIS band knife machine Set Price: EUR 9,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 8,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Spreading Tables: 1 × 10-meter spreading table Price: EUR 500 1 × 8-meter spreading table Iiodpfxey Tp Sie Ahnsg Price: EUR 500 Plaid Fabric Cutting Table with Awl Special table for precise plaid/check fabric alignment and cutting. Price: EUR 2,500 Embroidery Equipment 1 × ZSK 10-Head Embroidery Machine Industrial multi-head embroidery machine by ZSK. Price: EUR 5,000 Pressing Equipment 1 × MAYER RPS-M 1000 Press Mayer industrial pressing machine. Price: EUR 8,000 1 × MAYER AHV-BM 1370 Press Price: EUR 4,000 1 × MAYER APM-1150 Press Price:EUR 4,000 Additional Information feel free to contact me (Viber,Whatsapp) Machines can be inspected under power Professional dismantling available upon agreement Loading assistance available Transport can be arranged separately Suitable for garment factories, textile manufacturers, upholstery production, and industrial textile processing All prices are net prices (excluding VAT, dismantling, loading, and transport) Contact: G. Jordanov Location: Ruse,Bulgaria

Year of construction: 2025, condition: like new (used), The separator is designed for screening topsoil / humus. Screening and mixing of compost, sand, or other materials can be performed in a single operation with the Terra-Star. Iiedpfx Ajya Uu Ishnsg The four shafts deliver an impressive throughput when screening and mixing. The shafts are fitted with wear-resistant HX 500 star discs. When wear occurs, the discs can be re-welded at any time. The Terra-Star is a modern, forward-thinking system that already provides the foundation for tomorrow’s adaptability. Switching to other carrier machines is always possible, as all components are bolted. The shafts can also be converted for other applications at any time, for example, from screening shafts to mixing shafts or to any other combination. Required adapters for excavators or wheel loaders are, of course, available upon request directly from us. Price without mounting plate. Mounted is a Lehnhoff quick coupler, which can be retained or purchased separately. Price MS 03: €420 For excavators from 2.2 t For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h Leak oil connection required: 0 Series: TSE.054.104

Condition: excellent (used), Guide plates 1250 mm long x 460 mm high, strong steel base frame with 2 guide shafts and 4 adjustment spindles each, can be mounted behind any type of gang saw, also 2 robust, toothed pressure roller devices with 4 ball bearings each to complement it Isdpfx Ahoui Ifconoig

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 09075101981004, input voltage: 380 V, type of input current: three-phase, total length: 28,000 mm, year of last overhaul: 2024, control voltage: 380 V, workpiece height (max.): 160 mm, Equipment: double-sided, A woodworking company in Latvia is offering a complete Weinig GreCon Combipact finger jointing line for sale. The machine has had only two owners, both well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for the sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated in a single shift. The machine also has the option to produce finger joint connections for furniture. Iedpfxsz Armlj Ahnoig The machine can be inspected and demonstrated in operation at our facility. Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity and profitability. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig Dimter Opticut optimization line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information. Additional images and videos can also be provided.

Year of construction: 2026, condition: new, functionality: fully functional, For sale: new Juneng KYDB204 disc stack centrifuge / 3-phase separator. Manufacturer: Juneng Machinery Model: KYDB204 Type: disc stack centrifuge / centrifugal separator Separation: liquid-liquid-solid / 3-phase separation Drum diameter :242(mm) Rotary speed: 8086(r/min) Motor model and power: Y112M-4-B5 4KW Capacity: 0.5-2m3/h(depend on material condition ) Power: 4(KW) Dimension（L*W*H） 830*610*1150(mm) Weight: 580(kg) Degree of automation :Automatic cleaning and slag discharging Dimension: 810*968*1139mm(L*W*H) Material: stainless steel, according to manufacturer specification Condition: new / unused Application: oil-water-solid separation, liquid clarification, fine separation Seller: Leonagra s.r.o., EU company EU invoice possible Delivery to Europe can be arranged The Juneng KYDB204 is a compact industrial disc stack separator designed for continuous liquid-liquid-solid separation. It is suitable for applications where oil, water and fine solid particles need to be separated in a closed centrifugal system. Typical applications: edible oil clarification vegetable oil / crude oil polishing oil-water separation fuel / lubricant treatment fine chemical liquid separation food and beverage liquid clarification industrial process liquid separation Main advantages: compact disc stack centrifuge design continuous operation closed inlet and outlet system high-speed centrifugal separation fine separation of liquid phases and solids stainless steel execution according to manufacturer specification suitable for integration into existing process lines The machine is offered as new equipment through an EU seller. Delivery, documentation and final technical confirmation can be arranged before order. Technical details to be confirmed according to final product application. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: neue Juneng KYDB204 Tellerzentrifuge / 3-Phasen-Separator. Iiodpozlby Hefx Ahnog Neue Juneng KYDB204 Disc-Stack-Zentrifuge zur kontinuierlichen Flüssig-Flüssig-Feststoff-Trennung. Geeignet für Öl-Wasser-Feststoff-Trennung, Pflanzenölklärung, Prozessflüssigkeiten, Lebensmittel-, Chemie- und Industrieanwendungen. Kapazität: ca. 2.000 l/h, abhängig vom Produkt und Prozess Motorleistung: ca. 4 kW Ausführung: Edelstahl gemäß Herstellerspezifikation Zustand: neu / unbenutzt EU-Verkäufer: Leonagra s.r.o. EU-Rechnung möglich Lieferung nach Europa kann organisiert werden Technische Details und Eignung bitte je nach Anwendung final bestätigen.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Direction of rotation: Right to left Condition: As is (Very good condition) Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm - Spindle cooling Water-cooled Iisdpez A D H Uefx Ahnog - Control & Software Schraml software with Siemens electrical components - Included accessories Automatic sharpening device for tools - Separate vacuum pump for glass fixing - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Dismantling, loading and installation can be carried out on request by our service team.

Condition: used, Year of construction: 2016, operating hours: 7,253 h, functionality: unexamined, machine/vehicle number: 108.004.00.0135, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table width: 560 mm, table length: 1,000 mm, table load: 1,350 kg, overall weight: 6,500 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 3-axis vertical machining center Mikron VCE 1000 Pro, manufactured in 2016, with Heidenhain TNC 620 control. Iedpfx Ahoz A Ufusnoig Serial number: 108.004.00.0135, connection 3 x 400 V, 32 A, 16 kW, weight 6,500 kg. Operating hours: 7,253 h. Travel ranges X/Y/Z: 1,020 x 560 x 600 mm, table area 1,000 x 560 mm, table load 1,350 kg. Equipment: chip conveyor with chip cart, oil mist separator AQF, cooling unit, special rotary feedthrough for air and water. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine with extensive accessories! Made in Bienne/Biel, Switzerland Excellent condition! Coordinate drilling machine/fixture drilling machine with tool set (see photos) in very well-maintained, exceptional condition, second owner (41 years in current ownership). This quality will never be produced again! The coordinate drilling machine has the rare option of motorized table drive in the X and Y axes and potentiometers. This eliminates the tedious manual adjustment of individual coordinates over long distances using hand cranks. Furthermore, it has rare thermal stabilization and expansion compensation. For this purpose, 2 heaters are provided, which must be switched on separately before starting work and to maintain high accuracy and dimensional accuracy. This explains the factory-set high positioning accuracy of 0.002 mm with a resolution of 0.00. It is worth noting that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and facing at depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and highly unlikely to be available again. These machines are mainly used in the watch industry, gunsmithing/defense industry, precision engineering, material testing, and the optical industry, where the highest precision is required. It is also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are, of course, available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, Vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mount MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds continuously variable from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 steps from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Iiodpfx Aozuvwljhneg Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm, Machine weight approx. 1500 kg. Payment for the machine, as is customary with used machines, is made in full before loading, no partial or installment payments! Special price due to business closure. Shipping (direct transport without transshipment) within the EU is possible. Price net export within the EU. Example: Secure shipping by direct transport (without transshipment!) to France/Spain/Italy, etc., up to 1700 km travel distance, approx. 1100 - 1450 EUR.

Year of construction: 2023, operating hours: 20 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2022/02, Complete EPS Production Line / EPS Block & Insulation Board Manufacturing Plant – Like New Complete, almost-new EPS production system for sale – immediately available in Hungary, European Union. We are offering for sale a complete industrial production system for the manufacturing of EPS blocks and EPS insulation boards. Iedpfoz Alpmex Ahnjig The production line has been used only to a very limited extent and is in excellent condition. This presents an opportunity for an established manufacturer or investor to acquire a complete EPS production facility at a substantially lower investment cost than a comparable new system, without the long delivery and commissioning time associated with a new plant. Two purchase options: 1. Complete production plant including industrial site Price: EUR 859,000 + VAT The complete production system is offered together with the industrial site and the infrastructure included in the sale. 2. Complete machinery and production system without site and containers Price: EUR 769,000 + VAT The complete machinery and production equipment can also be purchased separately and relocated to the buyer's own production facility. Condition and availability The equipment is almost new and has been used only to a very limited extent. The complete production facility is available immediately and can be inspected in Hungary by prior appointment. Technical documentation and further information are available for serious prospective buyers. Key advantages: Complete industrial EPS production system EPS block production EPS insulation board production Almost-new condition Very limited use Immediately available Located in Hungary, European Union Significantly lower investment than a comparable new plant No long manufacturing lead time Available with or without the industrial site Technical documentation available Inspection possible by prior appointment Technical handover and support can be discussed individually Assistance with dismantling, preparation for transport, installation and commissioning can be agreed upon separately Investment comparison The estimated replacement value of a comparable new production system is approximately EUR 1.25–1.35 million + VAT, depending on the configuration. Selling price Complete production plant including industrial site: EUR 859,000 + VAT Complete machinery and production system without site and containers: EUR 769,000 + VAT Serious inquiries only. A detailed equipment list, technical specifications, photographs, videos, and further documentation can be provided to prospective buyers. The production facility can be inspected in Hungary by prior appointment.

Condition: used, Year of construction: 2014, operating hours: 24,209 h, functionality: fully functional, machine/vehicle number: 286-56, total height: 3,000 mm, total length: 4,545 mm, total width: 2,450 mm, table width: 860 mm, table height: 975 mm, overall weight: 10,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, For sale is a CHIRON FZ15 W Magnum high-speed machining center (Type 286-56) from 2014. The machine is a fast, single-spindle traveling column machine with an integrated workpiece changer and a FANUC control (31i series), designed for productive series machining of metal and plastic parts (milling, drilling, threading, reaming, boring). Technical data: Iiodpozv Tlvjfx Ahnsg Control: FANUC 31i Travel ranges X/Y/Z: 730 / 400 / 360 mm Rapid traverse X/Y/Z: 75 m/min Spindle speed max.: 12,000 min⁻¹ Spindle power: 7.5 – 15.0 kW Spindle torque max.: 95 Nm Tool holder: HSK-A63 Tool magazine: Chain magazine, 48 positions Max. tool length: 300 mm Max. tool diameter: 78 mm (140 mm with free adjacent position) Max. tool weight: 8 kg (10 kg with reinforced positions) Workpiece changer (tandem/tilting device), bridge dimension 800 mm, max. fixture height 234 mm Enclosed cabinet, coolant emulsion Equipment / Peripherals: Coolant system TPF 350S (Bürener) with paper band filter and double safety filter, filling volume approx. 980 l Tool internal cooling (high pressure through spindle) Chip conveyor Extraction system / emulsion mist separator (Handte, EM Compact 800) Control cabinet cooler Oil central lubrication Table measuring probe Renishaw TS27R Coolant gun Energy-saving and warm-up functions (PowerSave / WarmUp) Connection values: Electrical connection: approx. 27 kVA, connection M40 Compressed air: min. 5.5 bar, approx. 510 Nl/min Coolant connection DN40 Dimensions / Installation: Footprint approx. 4,543 × 4,441 mm (L × W, incl. peripherals) Height approx. 2,405 mm (max. 3,042 mm with extraction system)

Condition: refurbished (used), Year of construction: 2003, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 33515 - Manufacturing date: 12/03 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 Iiedpfx Ahsyanlaensg - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: excellent (used), functionality: fully functional, Production lines for fruit and vegetable preserves. A significant portion of the equipment is newer – from 2011 and 2014 – supplemented by older, robust machines that have proven their reliability through years of continuous operation. The machines are sold as a complete line. Line capacity (based on an example product) – approximately 1200 liter jars/hour (~1.5 tons/hour). This translates to approximately 28,800 jars/day, or ~36 tons/day. (I) What can be produced on this line: - Compotes (jars, bottles) - Jams and thick preserves - Juices (bottle filling, tube pasteurization) - Canned goods (sterilization in an autoclave) - Pasteurized preserves in jars (pickles, vegetables, sauces) (II) Process flow: 1. Product dosing – into buckets, jars (2 dosing machines) 2. Filling – bottles (filling machine), cans (dosing machine + seamer) 3. Thermal processing – boiling tank, evaporators (juice/puree concentration), tube pasteurizer (liquid product before filling) 4. Packaging closing – sealers (bottles, jars), capping machine 5. Sterilization/pasteurization of finished packaging – autoclave (cans, jars), tunnel pasteurizers (3 units) 6. Labeling – labelers for bottles, jars and cartons 7. Collective packaging – heat tunnels (shrink film), conveyors (III) Equipment list: 1. Carton labeler 2. Heat tunnel (shrink film) 3. Conveyors 4. Heat tunnel 5. Bottle labeler 6. Jar/bottle labeler 7. Heat tunnel x 3 8. Labeler (without control panel) 9. Tunnel pasteurizer x2 10. Dosing machine for buckets 11. Dosing machine + seamer for cans 12. Pleszew Autoclave (2011) 13. Tunnel pasteurizer 14. Dosing machine 15. Capping machine 16. Seamer 17. Bottle filling machine 18. Jar seamer 19. Dosing machine for jars x2 20. Tube pasteurizer 21. Evaporator x3 Iiedpfx Aez Daatohnjg 22. Boiling tank Total value: 2,380,000 PLN = ~ 545,000 EUR (IV) Why buy the entire line: Complete process line – from dosing to collective packaging – without the need to find missing components. Option for pickup with dismantling and transportation (to be agreed upon). Equipment used in production – documented history of use. Flexible sales options: entire line, separate technological units (e.g., canned goods section with autoclave, bottle filling section), or individual machines. Terms: Visit possible by prior arrangement. Transportation and dismantling to be agreed upon.

Year of construction: 2024, condition: like new (used), The separator is designed for screening topsoil / humus. With the Terra-Star, screening and blending of compost, sand, or other materials can be accomplished in a single operation. The four shafts provide impressive throughput in screening and mixing. The shafts are equipped with star discs made from wear-resistant HX 500. In case of wear, re-welding can be performed at any time. Iedpeya Uuzefx Ahnjig The Terra-Star is a modern system designed to give you a foundation for future adaptation, today. Changing to other carrier machines is always possible, as all connections are bolted. Converting the shafts for different applications is also feasible at any time—from screening shafts to mixing shafts or other combinations. Required adapters for excavators or wheel loaders are available from us upon request. For excavators from 2.2 t For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h No leakage oil connection required Series: TSE.054.087

Condition: ready for operation (used), Year of construction: 2021, A system for the mechanical separation of meat and bones, tendons or hides is available. Throughput capacity: approx. 3t/h, filling volume: 800l, working filling capacity: 80%-95%. Machine dimensions X/Y/Z: approx. 2300mm/1800mm/2100mm, weight: approx. 2300kg, control: Siemens Simatic, operating hours: 7504h. Tools included. Documentation available. On-site inspection is possible. Expected to be available from August 2025. Ijdpswlig Djfx Ahnjig

Condition: good (used), Oil-water separation system for compressor condensate External dimensions: Diameter: 600 mm Height: 1180 mm Weight: approx. 50 kg Condition: good, second-hand Iodpfx Ahozh Iddonjig

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. Isdpfxjq Nw Uqj Ahnsig ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 2.25 kW (3.06 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: AC, tool diameter: 40 mm, spindle mount: MK 4, drilling depth: 130 mm, actuation type: manual, rotational speed (max.): 2,380 rpm, rotational speed (min.): 65 rpm, total width: 685 mm, total length: 1,030 mm, total height: 1,900 mm, throat depth: 300 mm, table width: 600 mm, table length: 460 mm, overall weight: 410 kg, Equipment: documentation/manual, rotational speed infinitely variable, Column drilling machine SerrMac TCO 40L - Year of manufacture: 1999 - Good condition considering its age - Work table: 600 (width) x 460 (depth) mm - Motor: 2.25 kW - Spindle speed: 65 – 2,380 rpm – 2 speeds via gearbox, infinitely variable within each speed - Mechanical drill drive with feed rate adjustment possible - Thread cutting device - LED table lighting (retrofitted) Isdpfjz Ailrox Ahnsig - Sturdy machine with a robust column - Weight: 410 kg - Fully functional - Tool holder, clamping devices, and a vise can be purchased separately, depending on the pricing - Machine can be inspected while powered on This offer is non-binding. Subject to prior sale. No online sales. Sale is only to commercial customers after inspection and acceptance on-site. Due to the age of the machine, the sale is made without any warranty. Pickup only (EXW) - no shipping.

Condition: new, The side board separator conveyor is installed after the R200. Iiedpfszz Il Iox Ahnog

Year of construction: 2025, condition: like new (used), Fine screening 0-15/20 mm. The separator is ideally suited for fine screening of topsoil and humus when it is undesirable for larger stones to be present in significant quantities in the screened material. The mixing of compost, sand, or substrate in a supplementary pass while screening with a Terra-Star also works excellently. This way, dirt is turned into new money! Iisdjyfwd Nspfx Ahnsg Disc spacing: 10 mm. Screen size: 0-15/20 mm. Fitted with an OQ45-5 quick coupler, which can be replaced or purchased for €1,890. For excavators from 6 t For wheel loaders from 4 t Throughput: 18-23 m³/h Leak oil connection required: 2 Series: TSE.103.569

Year of construction: 2025, condition: like new (used), Medium screening 0-20/25 mm The installed screening shaft with a disc spacing of 15 mm is the most popular and frequently purchased screening line. Suitable for screening topsoil/humus, with smaller stones of -20/25 mm included in the fraction. The stones maintain soil permeability and stability, reducing moss formation. Mixing in compost, sand, or substrate turns dirt into new revenue. Disc spacing 15 mm – in a single operation with screening – works excellently with a Terra-Star. Screen fraction: 0-20/25 mm Wheel loader mounting is installed but not included in the price. On request, we supply the separator with adapters for excavators and wheel loaders. For excavators from 4t For wheel loaders from 3t No leakage oil connection necessary Iijdpfx Ahsyfwbzeneg Series: TSE.083.210

Condition: excellent (used), functionality: fully functional, overall weight: 1,200 kg, type of input current: three-phase, power: 11 kW (14.96 HP), rotational speed (min.): 6,500 rpm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, CLARIFIER FOR JUICES, WINES, OILS, 11 KW, UP TO 10 M³/H IMMA MICRO, 5.5 KW, 2 M³/H = 7,500 EUR Iisdpfx Aezv I Acjhnsg

Condition: used, Year of construction: 2004, We are offering this used STORK MPS B.V. bone separator. Type no: DMM50; Serial no: B27-13B; Order no: BX152004; Voltage: 400V; PHASE/Hz: 3/50; Netherlands; Year of manufacture: 2004. Control cabinet is not included. Net price: 7,000 EUR. Price negotiable. Iodey Hi A Ujpfx Ahnoig