Used Oil Separator for sale (12,574)

Year of construction: 2008, condition: used, functionality: fully functional, suction capacity: 4,000 m³/h, Oil mist extraction unit for CNC machines, ScandMist MA 400D filter separator. Fan with a power of 7.5 kW. Inlet diameter: 315 mm. Capacity: 4000 m3/h. The unit is equipped with a frequency converter. Several units of this device are available (the price stated is for 1 unit). Hfedpjz R Rlvsfx Ag Son The ScandMist filter is one of the most efficient oil mist and oil fume filters in the world. It has very low maintenance requirements and can operate for several years without filter replacement, which results in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency and can operate continuously without interruptions. The liquid collects at the bottom of the filter and can be reused for operation. These units use a 3-stage mechanical filtration process. Stock number: 1176 (3/3)

Year of construction: 2021, condition: used, Removes oil from your compressor condensate The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away. The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor. Hfsdpfez Ndazjx Ag Sen Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Oil-water separator for compressor condensate Filtration: Oil filter and activated carbon filter Weight: 6.8 kg (empty)

Condition: good (used), We are offering a BEKO Öwamat 4 here. Technical data and specifications: Subject to change without notice. Please contact us for a quote. Hedextu Nkopfx Ag Ssfn

Condition: used, Year of construction: 2023, machine/vehicle number: 8102046714, Used Atlas Copco Oil-Water Separator OSC 1250 For compressors with a free air delivery (FAD) of up to 75 m³/min The OSC 1250 is used and in good condition. The scope of delivery includes 4 new filter bags (see photo). Technical Data: Flow rate (with dryers and filters): Max.: 1,250 l/sMin.: 608 l/sFlow rate (without dryers and filters): Max.: 1,563 l/sMin.: 839 l/s Residual oil content at outlet: max. ≤10 mg/l Hfsdpfx Agsz D Udye Son Connections: Condensate inlet: 2 x ¾" Water outlet: ¾" Test connection: ¼" Dimensions: Width: 800 mm Height: 960 mm Length: 850 mm Weight: 91 kg Visit our showroom in Erlangen, Germany.With over 450 m² of exhibition space, you will find a wide selection of both used and new compressors.

Condition: good (used), Oil-water separation system for compressor condensate. Height: 1000 mm Width: 500 mm Depth: 500 mm Weight: approx. 20 kg Hedpfx Agezqc Uve Sofn Condition: good, second-hand

Condition: used, Year of construction: 2011, functionality: fully functional, Donaldson DCE Torit DMC-MMC filter oil mist separator, oil separator, oil extractor, air filter Year of manufacture: 2011 Connection: 400V, 1.5KW Fully functional condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight forwarding possible, please inquire with postal code Hjdpfx Agjxri T Us Ssfn

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Absolent AB Hfedpstp Thbsfx Ag Sjn A mist 10C with HEPA filter Year of manufacture: 2011 In very good condition. The extraction unit can be inspected at our warehouse.

Condition: good (used), Max. External Dimensions: Hsdpfxozqc E Uj Ag Sofn Diameter: 580 mm Height: 1160 mm Weight: approx. 50 kg Condition: good, second-hand

Condition: good (used), Oil-water separation system for compressor condensate External dimensions: Diameter: 600 mm Height: 1180 mm Hfodpfxezh Idde Ag Sjn Weight: approx. 50 kg Condition: good, second-hand

Year of construction: 2016, condition: good (used), machine/vehicle number: 3385, The cost-effective drainage of condensate for your compressor. Hfsdpfoqmmkkjx Ag Sen The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Year of construction: 2017, condition: good (used), machine/vehicle number: 4066, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request. Hfjdpfsqmmvcex Ag Son

Year of construction: 2017, condition: good (used), machine/vehicle number: 4068, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. Hsdpfx Agsqmmvre Sofn The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Year of construction: 2013, condition: good (used), machine/vehicle number: 3063, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Hedpfx Ageqmmffs Sjfn Price on request.

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Suitable for max. compressor delivery volume 3.8 m³/min (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Hjdpfjv Ta D Dsx Ag Sofn Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Condition: used, Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2010 Overall dimensions: 1000 x 570 x 1750 mm Electrical data: 400 V; 50 Hz; 2.2 kW Hfjdpfx Agsyn Rkuo Sen * 4000 m³/h * 84 dBA * 2800 L/min

Year of construction: 2017, condition: good (used), machine/vehicle number: 4789, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request. Hjdpoqmmcgofx Ag Sjfn

Condition: used, volume flow: 7,500 m³/h, Oil mist extractor for CNC machines, Donaldson Torit brand filter separator. The unit is designed for filtration of oil mist (emulsions as well as pure oil), vapors and fumes generated by various metal cutting processes. Filtration efficiency reaches 99.97% Hsdpexd Ry Hefx Ag Sofn Model: DMC-D2 Fan power: 7.5 kW Capacity: 7,500 m3/h Filtration area: 40.8 m2 Filter cartridges in very good condition. Stock no.: 1043

Condition: used, Oil Mist Extractor, Emulsion Mist Separator, Used Machine Manufacturer: IFS Industriefilter Service GmbH Type: IFM 2000 Overall dimensions: Width: 1170 mm Depth: 700 mm Height: 1100 mm Weight: 136.5 kg Year of manufacture: 1995 Hfjdpfxeyn Rmie Ag Sen Electrical data: 400V, 1.5 kW, 3.2 A Filter size: 605 x 615 mm

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st stage: Washable metal mesh filter 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Applications: - Lathes - Machine tools - Metal-cutting machines Hfodpowwt Tlofx Ag Son Advantages: - Compact design - High separation efficiency thanks to three-stage filtration - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options

Year of construction: 2018, condition: new, Condensate treatment: new Kaeser oil/water separator CF 38 Technical data: max. flow rate for oil-cooled screw compressors and oil types in climate zone 2 (= Central & Southern Europe, parts of South America, North Africa): 22.5 m³/min for the oil types S-460, MOL, MOH, PAO, VCL 29.3 m³/min for the oil type VDL Tank size (volume): 115.5 l Filling volume: 84.3 l Condensate inlet connection: 3 x DN 13; 1 x DN 25 Water drain connection: DN 40 Oil drain connection: DN 40 Hfjdpfxedmqy Is Ag Son Oil collection container: 2 x 10 l Weight: 36.5 kg Dimensions W x D x H: 530 x 764 x 1090

Year of construction: 1980, condition: good (used), Oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 1615 2653 -Pressure: max. 11 bar Hfsdpfozt I Rzex Ag Sjn -Dimensions: 315/200/H500 mm -Weight: 22.2 kg

Condition: used, Year of construction: 1993, machine/vehicle number: 5/4573, total width: 7,500 mm, total height: 11,400 mm, overall weight: 45 kg, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the Hfsdpfx Ageqmmals Ssn scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: good (used), Extraction, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator -Ventilation grille: louvered grille, Filter for oil mist separator Hfedpfx Agoi I Hc Ho Ssn -Material: aluminum -Total dimensions: 440/330/H345 mm -Weight: 13.8kg

Condition: good (used), Year of construction: 2006, Filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, suspended matter filter -Manufacturer: WW, oil mist separator filter system type ME-FI 600 -Voltage: 230V / 0.15 kW -Filter: without filter -Quantity: 1 piece available -Dimensions: 710/390/H445 mm Hfsdpfx Ageiz Udwj Son -Weight: 38 kg

Condition: new, functionality: fully functional, Details: Manufacturer: KAESER Item: Oil Separator / Oil Separator Cartridge Part number: 6.2013.0 Size: Ø 275 x 462 mm Condition: New, in original packaging (OVP) Quantity: 2 units available Application: For KAESER screw compressors Maintenance / Service / Spare part Advantages: Original KAESER spare part Hfedpfjy E Rxnox Ag Sjn Immediately available Ideal for stockpiling or maintenance