Used Spot Welding for sale (6,992)

Condition: repair required (used), Full: 63 KVA Iodspy Dx Ijpfx Acaotk Arm design: 400 mm The machine is currently not working (control panel missing)

Condition: good (used), Arm design: 270 mm Power: 125 kVA Ijdopy Dy Espfx Acaetk

Condition: defective spare-parts repository (used), functionality: not functional, NIMAK BMP 20/200 spot welding machine for sale Iodpfx Acjzp H Ukjastk Arm length: 300 mm Power: 200 kVA The machine is out of service, and its condition is unknown.

Condition: defective spare-parts repository (used), functionality: not functional, Manufacturer: DALEX PMS 11-4 Arm length: 350 mm Isdpfx Ajzp Iazecaetk Power: 100 kVA The machine is out of service, and its condition is unknown.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SWM001, type of input current: DC, nominal power at 50% duty cycle: 37 kVA, input voltage: 380 V, type of cooling: water, overall weight: 230 kg, warranty duration: 24 months, welding power (max.): 75 kVA, total width: 500 mm, total height: 1,620 mm, total length: 950 mm, Spot welder / welding machine with water cooling – 75KVA – adjustable power, resistance, etc., + spare tips Itsdpfx Acjyl Sy Ejaek

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Hib Akzent 1000 Model T1060-8 Welding Tongs Control Very good used condition, fully functional. Item location: 75053 Gondelsheim See pictures Itsdpfx Aoxmuzmjcajk Shipping by freight carrier or collection

Condition: excellent (used), pneumatically operated, water-cooled spot welding tongs Manufacturer: DALEX, Type: 3238 with double-acting cylinder and manual control valve Itjdpfoztmb Eox Acask Long stroke: 75 mm – Pre-stroke: 25 mm – Working stroke with stroke adjustment: 0-25 mm Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm extension: 350 mm with universal joint suspension and suspension bracket 10 m connection cable included: Synchronous welding control RS 12 with main switch and 32 A CEE plug.

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, throat depth: 500 mm, Manufacturer: Fase Full: 116 kVA Version: 500mm Itedpfsuhn Tkox Acajk The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, This version is required to operate the machine!

Condition: excellent (used), hand-operated, water-cooled spot welding tongs with dual-stroke mechanism and short-stroke stop Short stroke: 25 mm - Long stroke: 57 mm Manufacturer: DALEX, Type: A 3119 Rated power at 50% duty cycle: 8.0 kVA Secondary short-circuit current: 9.5 kA Electrode force: 180 daN Arm spacing: 120 mm Arm outreach: 250 mm also included: DALEX control unit RS 11-2 with connection plug 16 A CEE extensive range of electrode arms (all water-cooled) in stock Itjdpfjzua Hkex Acaek

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Water-cooled, pneumatically operated spot welding tongs Nimak L123 Very good used condition, fully functional. Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection Itedpfx Asxmuyvjcask

Condition: good (used), - Capacity 100 kVA Itjdoykcnqopfx Acajk - Pneumatic - Throat depth 570 mm - 380 V

Condition: ready for operation (used), 6355 Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH, Used machine Manufacturer : Meritus Type : RAS 150 VSH Overall dimensions : 1000 x 1620 x 2100 mm Iodpfx Asu Nvh Uecastk Weight : 840 kg Electrical data : 415 V ; 150 kVA ; 50 Hz - equipped with a photocell - tool water cooled

Condition: excellent (used), Foot-operated, water-cooled rocker-arm spot welding machine Itjdpfxeztyn Se Acask Manufacturer: DALEX, Model: SF 8-2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8.8 kA 4-stage switch Electrode force: 235 daN Arm extension: 80-300 mm With synchronous welding control RS 11-2 With main switch

Year of construction: 1999, condition: excellent (used), Spot welding machine NIMAK PMP 5/35 + water cooling unit Year of construction approx. 1980 Power at 50% ED 35 kVA Projection 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely adjustable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insertion electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Itedpfx Ajium Nijcaek Adjustability of the electrode holder 200 mm Connected load 83 KVA Mains connection 380 volts, 50 Hz - 4-time control - stepless power adjustment - Single points and series points - parallel electrode guidance - Water-cooled (without cooling unit) - electric foot switch Weight 300kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Water-cooled, pneumatic spot welding tong Nimak L193 TB. Very good used condition, fully functional. Item located in 75053 Gondelsheim. See photos. Shipping by forwarding agent or collection. Iedpfxjxmuypo Acaotk

Condition: good (used), WMA WMP 08 One-Hand Spot Welder Air-cooled one-hand spot welder for vehicle manufacturing, tank construction, steel cabinet manufacturing, sheet metal processing, and the wire industry - Effortless welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardized rotary connectors - Only one connector each for welding current cable, control cable, and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Simple and user-friendly operation - All set parameters and process variables can be read at a glance - Changes to welding parameters only by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 welding times - 8 programs - Built-in unit - Automatic Mains frequency detection 50/60 Hz - Power failure-proof parameter storage - "On/Off" switching via button Additional configuration parameters (user-locked): - Program selection - Advance contact - Advance contact time - Two-hand interlock (Check) - Start signal interlock - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - First half-wave delay External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. External inputs (24V, DC stabilized and switching) Iedpfx Aceq H Aqxeaetk - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. ``` External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay progress contact - Relay ready Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle): 22.5 kVA Control cabinet with PLC logo PDF files available under the Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Iedpel Smn Sefx Acastk Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, We are selling a PCB spot welding system from AMADA, mounted on a workbench. The welding head is type FD 120-A/So, year of manufacture 2019. Itodpfsyhwduox Acaok

Condition: good (used), Power: 50 kVA Iedpfxjpy Dypj Acastk Arm design: 520 mm

Condition: like new (used), Year of construction: 2021, Power at 50%: 50kVA Short circuit-current: 25kA Electrode force: 420daN Throat depth: 380-700mm --- Weld control: RS 17 (5-times, 2-program) --- Itedozl A Rtopfx Acaok Extra Equipment: - foot pedal - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: good (used), Year of construction: 2001, Offer 26161 Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 107 kVA - Adjustable reach: 140 - 500 mm Itjdezfim Iepfx Acaek - Welding parameters: - Steel sheet: 6 + 6 mm - Brass sheet: 3 + 3 mm - Aluminum sheet: 1.2 + 1.2 mm - Adjustable electrode force: 17 - 278 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 8 l/min - Power supply: 400 V - Space requirement: approx. W 670 x H 1250 x D 1600 mm - Weight: approx. 240 kg - Including: - Welding control system DALEX MPS 200 - Foot-operated switch

Condition: good (used), Year of construction: 2001, machine/vehicle number: ZAC-N-14354, Offer 26162 Technical data: - Rated power at 50% duty cycle 80 kVA - Max. welding power 211 kVA - Outreach 350 mm - Welding parameters: - Steel sheet 8 + 8 mm - Brass sheet 4 + 4 mm - Aluminum sheet 4 + 4 mm - Electrode force, adjustable 120 - 720 daN - Required air pressure 6 - 10 bar - Cooling water flow rate 12 l/min - Control system DALEX MPS 8043-1 for: - Pre-heating time; current time; - Post-heating + open-arc time, as well as - Rise time + pulse + pause time - Power supply 400 V - Space requirement approx. W 950 x H 2100 x D 1500 mm - Weight approx. 600 kg - Including: Isdezfigzopfx Acajtk - Complete electrical and pneumatic system - Foot-operated switch

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm Itsdpfx Acey Au Eyeaek -Weight: 966 kg / 70 kg

Condition: good (used), Year of construction: 1995, Rated power: 63 kVA Thrust: 520 mm Electrode arm distance: 200 mm Iedpfxowurw Ro Acaotk Welding capacity for steel: approx. 7 + 7 mm Welding capacity for non-ferrous metals: approx. 2 + 2 mm Electrical connection: 380 V kW

Condition: like new (used), Power at 50%: 35kVA Short circuit-current: 15,5kA Electrode force: 470daN / double stroke Iodpezl A S Rjfx Acaotk Throat depth: 400mm --- Weld control: TE 101 (8-times, 100-program) --- Extra Equipment: - foot pedal - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock