Used Longitudinal Welding for sale (7,927)

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 133504, MACHINE DETAILS Dimensions (L x W x H): approx. 9,000 x 6,000 x 2,800 mm Voltage: 400 V AC Frequency: 50 Hz Fuse rating: 1,700 A Rated current: 150 A Power supply system: TN-S Gkjdpe Ah Em Nofx Adksd Supply pressure: max. 10 bar Operating pressure: 6 bar Compressed air connection: G ½ inch Compressed air quality: ISO 8573-1, cleaned and oil-free Ambient temperature: 10–45 °C Relative humidity: 20–80 % (without condensation) Noise level: < 78 dB(A) EQUIPMENT Suitable for operating environments with low dust and dirt levels, as well as oil vapors and humidity. Note: Further technical details can be found in the attached documents.

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed. Gjdpfx Asy Efmgodkekd

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz Gkedjxlr Tdspfx Adksd

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: Gkodpfx Adjzimbkoksd long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, working width: 2,500 mm, welding power (max.): 500 kVA, wire diameter (max.): 10 mm, type of input current: three-phase, mesh size: 2,50,02,500 mm, continuous power (apparent): 500 kVA, The VARO SARG-2500 is an automatic line designed for the production of welded wire mesh for fencing applications, equipped with medium-frequency welding technology. The machine is designed to process mesh panels up to 2,500 x 2,500 mm, using longitudinal and cross wires with diameters ranging from 3.0 to 8.0 mm. The minimum adjustable pitch is 30 mm for longitudinal wires and 10 mm for cross wires. The welding system consists of 12 welding heads with double-stage pneumatic cylinders and 2 TECNA 250 kVA welding transformers, controlled by inverters. The production speed specified in the technical documentation is 70–90 welds/min. The line includes automatic loading of the longitudinal wires, an electronically controlled pushing system for feeding the wires into the welding station, and an automatic system for loading the upper cross wires. Mesh advancement is electronically controlled by a brushless motor, with adjustable mechanical grippers. After welding, an electronically controlled carriage transfers the mesh to the next processing stage. The system is equipped with two hydraulic side trimming units for cutting the protruding wire ends. The line also includes a bending station with an hydraulic press, needed for the 3D panels. After bending, the finished mesh is automatically transferred to the unloading station and deposited onto a supporting table or pallet. Machine operation is managed through a dedicated electrical control cabinet with Siemens S7 PLC, PC and operator panel for setting and controlling the production cycle parameters. Main Technical Specifications • Manufacturer: VARO • Model: SARG-2500 • Maximum mesh size: 2,500 x 2,500 mm • Longitudinal wire diameter: 3.0–8.0 mm • Cross wire diameter: 3.0–8.0 mm • Minimum longitudinal wire pitch: 25 mm, adjustable Gksdo Ahnkdspfx Adkod • Minimum cross wire pitch: 10 mm, adjustable • Number of welding heads: 12 • Welding transformers: 2 x TECNA 250 kVA three phases • Welding speed: 70–90 welds/min • Power supply: 400 V / 50 Hz • Hydraulic bending press: yes • Control system: Siemens S7 PLC + PC • Cross wire loading: Upper and lower • Side trimming: 2 hydraulic trimming units • Mesh feeding: Electronically controlled, brushless motor - optional: double wire automatic system installation

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, year of last overhaul: 2011, Equipment: CE marking, documentation/manual, Friction welding machine from the manufacturer MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315, - Rexroth hydraulics - German user interface - CE marking Gedpfxsv Uzf Ej Adkekd Upon request, this machine can also be converted for many other welding tasks. We can also produce your friction welding joints, up to 300 tons of clamping force. Please contact us for further information!

Condition: as good as new (ex-display), FRONIUS MAGICWAVE 5000 AC DC Gedpfjxhd Tuex Adkskd Scope of delivery: ➤ Fronius MagicWave 5000 (500A) ➤ Fronius FK 4000 water cooling unit ➤ Fronius TIG hand welding torch ➤ Fronius trolley ➤ Ground cable 3-4m ➤ Pressure regulator

Condition: used, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, continuous power: 3,000 kW (4,078.86 HP), Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine SURE3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: The SURE handheld laser welding system with 3,000 watts of power! Perfectly suited for demanding sheet metal processing – efficient, safe, and flexible to use. Highlights and Features: Power: 3,000 watts for the highest welding quality and speed Gkedjy R I Tgopfx Adked Laser wavelength: 1080 nm, continuous operation with a modulation frequency of up to 20 kHz Handheld laser welding head – optimally positioned for comfortable operation Robust housing, intelligent internal structure for maximum service life Touchscreen display for easy operation Automatic multi-function wire feed possible Safety features: Three-color alarm, safety interlocks, protection mechanism against incorrect operation Cooling via a separate water circuit with a 13-liter tank volume CE-certified components according to European standards. Your Advantages Work safely thanks to extensive protection mechanisms and alarm systems Flexible application possibilities, including automatic wire feed and robot integration Low operating costs and easy maintenance thanks to well-designed technology and durable components.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Gkodpfjrl S Ufjx Adked Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: as good as new (ex-display), JUNE OFFER: -10% on all welding equipment throughout June. We offer welding equipment in various configurations and always have several sets in stock. CMT / ROBOT / CMT hose packages, UNIVERSAL or HOLLOW WAVE robots. Everything is in stock and immediately available! Don’t hesitate and request your individual configuration! We also have a wide variety of spare parts in stock – discounts of 30%, 50%, and 70%. Just send a short email, call, or use WhatsApp. CMT equipment at 1/3 of the new price! - 66% DISCOUNT ALL EQUIPMENT CAN BE INSPECTED IN VIENNA and purchased without waiting! The prices quoted are all from ... Euro. The prices/offers are individually tailored to the equipment configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Godpfx Aehzhynjdkskd Example images of the item. Please see the numerous YouTube videos on the topic of CMT! Also reachable via WhatsApp and Viber. In stock in Vienna 1230. Shipping on a pallet is possible for an additional charge: Austria approx. 180 Euro Germany approx. 230 Euro Europe on request All prices are ex-price. You can configure the equipment with us. Robot or handheld device. Long or short connection hose package. Various hose packages to choose from. Synchro pulse. 270, 400 or 500 amp equipment in stock. CMT version available as handheld or robot. It is best to call us, we will discuss your area of application, and you will receive an initial price estimate from us.

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg Godpjxy Hqtjfx Adkskd

Condition: excellent (used), Machine ready for operation. 1000-litre tank. 500-litre tank. The station was used for cleaning a soup and mayonnaise production line. Please check my other listings as well. Gksdpoytm Tiefx Adked

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 84 m², suction capacity: 9,700 m³/h, negative pressure: 3,800 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum-based, for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: ESTA Model: DUSTEX F-84 The filter is cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Gkede Ai S Skspfx Adked Parameters: Max. capacity – 9700 m3/h Max. vacuum – 3800 Pa Filtration area 84 m2 Cartridge filter inserts – 4 pcs. Motor power 7.5 Kw. Inlet diameter – 350 mm Device dimensions: Height – 3.38 m Width – 1.38 m x 1.34 m Base – 1.05 m x 1.05 m Stock number: 0031

Condition: used, Year of construction: 1988, functionality: limited functionality, total width: 5,500 mm, total length: 5,500 mm, We are offering this used Yaskawa Yasnac RX ENCM - RP618 welding cell with welding robot and rotary table, manufactured in 1988. Manufacturer: Yaskawa Model: Yasnac RX ENCM - RP618 Year of manufacture: 1988 Condition: Used Machine type: Welding cell with welding robot and rotary table Rotary table: Motoman Type YRFL-NND10G Data: Year: 1988 Weight: approx. 2200 kg Axis dimensions: 1400 mm x 600 mm Footprint: 5500 mm x 5500 mm Programming documentation not available PLC control with occasional error message (pressing the PLC control resolves the error) Included: Robot Rotary table Control cabinet Robot controller Pictured drip tray Pictured floor mat Light curtains Not included: Welding machine Extraction system Partition walls (right / left) Availability: Upon request Gkeds Aifrhspfx Adkod IMPORTANT!!! Dismantling and transport will be carried out by the buyer. If you have any questions or require further information, please send us a message or call us.

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Power Supply: 220V / 380V Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Gksdpfx Adezkkayokjd Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 126 m², suction capacity: 10,300 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, negative pressure system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: ESTA Model: DUSTEX F-126 The filter is cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean side, which minimizes the risk of explosion. Parameters: Maximum capacity - 10300 m3/h Filtration area - 126 m2 Cartridge filter inserts - 6 pcs. Motor power - 11 kW Inlet diameter - 2 x 300 mm Device dimensions: Height - 3.90 m Width - 2.12 m x 1.35 m Base - 1.47 m x 1.03 m Gkedpfj Aignwox Adked Stock number: 0030

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, type of input current: AC, input voltage: 230 V, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 170 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 230 A, input frequency: 50 Hz, Equipment: documentation/manual, EWM Tetrix XQ 230 puls AC/DC Expert 3.0 – Industrial TIG welding system with water cooling, extensive accessories, and a transport cart For sale is an EWM Tetrix XQ 230 puls AC/DC Expert 3.0 TIG welding system from the current generation of devices, featuring a large 7-inch graphic display, comprehensive Expert 3.0 control, and active water cooling. The system was purchased in 2023 and has been used very little due to a change in the intended application. The operating time is verifiably less than 50 hours. Consequently, the device is in near-new condition, both visually and technically. No dents, scratches, or other signs of wear. The excellent condition can be seen in the pictures. Additional pictures can be provided upon request. The welding system is sold with a comprehensively equipped complete set, which provides high-quality equipment for professional TIG welding in an industrial environment and enables immediate use. Gksdpfx Ao Aicx Dedked Scope of delivery: - Welding system: EWM Tetrix XQ 230 puls AC/DC Expert 3.0 with 7-inch graphic display (fully digital control, details see manufacturer's website) - Cooling module: EWM Cool XQ 40 for water-cooled welding - Transport cart for the welding system and gas cylinder - Water-cooled TIG torch, 4 m length, suitable for the Tetrix XQ system - Foot control for precise control of the welding current, particularly advantageous for aluminum welding - Comprehensive TIG accessory package, including various gas nozzles (shape and diameter), collets, tungsten electrodes in different diameters and designs, as well as gas lenses and other wear parts (see detailed pictures - the photos are of the product being sold). Most of the accessories are new or unused. - Transport case for storing the accessories - Several pairs of leather gloves, size 8 - Ground cable - Gas hose - Gas pressure regulator - Operating instructions A first-class equipped TIG welding system for demanding applications, where condition, low operating hours, and extensive accessories are convincing. Ideal for professional users looking for a high-quality EWM system without having to compromise on a comprehensive accessory package. Note: Not all components of the scope of delivery are shown in the pictures. The sale includes all components listed above.

Condition: like new (used), Year of construction: 2018, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20RD.(Payload: 20kg, H-Reach: 2017mm, Robot Mass: 293kg, 2010.04) 1 x YASKAWA DX100 controller.(2010.05). Gkedpfjh Ad E Usx Adksd 1 x IPG YLS-4000.(2017). 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD(S.N.:BIMO2W17013). Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, total height: 800 mm, total length: 3,000 mm, total width: 1,500 mm, Colour: Blue Empty weight: 1.400 kg - Model: Hardened metal Godpfe Ai Hb Iex Adkekd - Table length [mm]: 3000 - Table width [mm]: 1500 - Table top thickness [mm]: 15 - Max. workpiece weight [kg]: 4000 - Options: Drilled holes, Diagonal grid - └ Hole diameter [mm]: 28 - Transport dimensions: 3000mm x 1500mm x 800mm (l x w x h) - Transport weight [kg]: 1400kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Welding positioner, Protarc Zaar, height-adjustable, 1000 kg load capacity Speed continuously adjustable from 0.03 - 1 rpm. With foot pedal remote control Functionally flawless Gkodpfj Ah Sphsx Adked Minimum height in horizontal position approx. 850 mm Maximum height in horizontal position approx. 1400 mm Minimum height in tilted position approx. 650 mm Maximum height in tilted position approx. 1200 mm Diameter 1000 mm Length 2000 mm Width 1200 mm Control panel housing slightly damaged.

Condition: used, total height: 1,000 mm, total length: 2,400 mm, total width: 1,200 mm, Year of manufacture: 2024 Colour: Grey Empty weight: 800 kg Welding Table / Clamping Table - Drilled holes! - Diagonal grid! Dimensions: 2000x1000 - 2400x1200 - 3000x1500mm Tabletop thickness: 15 mm Hole diameter: 28 mm Price excludes accessories. Individual tools are also available. Standard Tool Set: - 4× 3D Angle 300 mm - 6× Stop 150 mm - 6× Stop 225 mm - 1× Protractor - 2× Prism - 1× Eccentric Clamp - 1× Flat Angle - 12× Clamping Bolt - 12× Clamping Clamp - Year: 2024 - Model: Hardened metal - Table length [mm]: 2400 - Table width [mm]: 1200 - Table top thickness [mm]: 15 - Options: Drilled holes, Clamping grid, Diagonal grid, Adjustable working height Gkjdpfj Ai E Dxsx Adked - └ Hole diameter [mm]: 28 - Transport dimensions: 2400mm x 1200mm x 1000mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Welding positioner, height-adjustable, with a load capacity of 1000 kg with foot-operated remote control and 2 hand-held remote controls Height when tilted, min. 360 mm, horizontal 470 mm Height when tilted, max. 910 mm, horizontal 1010 mm Diameter of the table 800 mm Center bore 200 mm Length 1800 mm Width 1100 mm Gksdpfs Ah Stwox Adkod

Condition: new, Year of construction: 2025, HW 3 in 1 Welding cleaning Cutting with 2kw Max laser power is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price Welding seam requirements: ≤0.5mm Gkjdpfx Adek Radijkjd Welding speed: 0-120mm/s Cooling method: dual temperature dual control intelligent refrigerator Operation temperature range: 5-40℃ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), Year of construction: 2016, Welding fume extraction system F-84, manufactured in 2016, for sale! A welding fume extraction system, type F-84, manufactured in 2016, is for sale. The system is sold with a comprehensive range of accessories. Gksdpfx Ao Ahq E Ijdkjd Included in the scope of delivery: * Various exhaust pipes * Several extraction arms * Other accessories The system is ideally suited for use in workshops and industrial facilities. If you are interested or have any questions, please do not hesitate to contact us!

Condition: used, functionality: fully functional, type of cooling: water, Equipment: documentation/manual, type plate available, The welding machine includes a Cool Midi 1800 cooling unit and a TA 24 control panel, complete with cables. It is fully functional and can be tested at our warehouse in Přerov. Gkodpj Ah S H Hsfx Adkjd