Used Sps for sale (1,336)

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 800 mm, wire diameter (max.): 0.33 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2014. It features an impressive X/Y/Z axes travel of 800 mm x 550 mm x 510 mm and U/V axes travel for tapering of 800 mm x 550 mm. The machine can handle workpieces up to 1300 mm x 1000 mm and 3000 kg in weight. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details. Bsdpfez Hwnysx Aktolp - Overall Dimensions (L x W x H): 2670 x 2870 x 2645 mm- Total Weight without Dielectric: 6300 kg- Total Weight with Dielectric: 8040 kg- Max Noise Level: 76 dB- Sliding Door: Yes- Worktable Dimensions: 1240 x 800 mm- Max Workpiece Dimensions: 1450 x 900 x 510 mm- Max Workpiece Weight: 3000 kg- Max Dielectric Level: 520 mm- Axis Travel X, Y, Z: 800 x 550 x 510 mm- Axis Travel U, V: 800 x 550 mm- Taper Angle / Height: ±30°/510 mm (Option ±45°/510 mm)- Taper Tapering Kit: Kit for 45° taper cut (Kit für 45° Konikschnitt)- Measurement Resolution X, Y, U, V, Z: 0.05 µm- Axis Speed: 0...3000 mm/min- Dielectric Type: Deionized water- Dielectric Total Volume: 1700 L- Dielectric Temperature Control: Automatic setting ±1°C- Filter Cartridges: 4- Cooling System: Water / Water heat exchanger- Wire Diameter: Ø 0.2...0.33 mm- Standard Wire Guides: Closed guides Ø 0.25 mm- Wire Guide Set: Taper Expert Ø 0.250 mm (for CUT X00/FI X4)- Automatic Threading: Yes- Permissible Wire Spool Weights: 8-25 kg- Generator Type: CLEANCUT- Three-Phase Input Voltage: 380/400 V ±10%- Mains Frequency: 50 or 60 Hz- Max / Required Power: 12 kVA- Min Roughness: Ra 0.2 µm (carbide) / 0.28 µm (steel)- User Interface: AC CUT HMI- Operating System: Windows XP- Display: 15" LCD- Connectivity: E-Connectivity, Ethernet, USB- Operating Ambient Temperature: 15...30 °C (20 ± 1 °C for optimal precision)- Max Relative Humidity: 40...80%- Compressed Air: 6-7 bar

Condition: new, Year of construction: 2026, I am selling a KUSING SPS-500 bottom crosscut saw. This is a fully electric, robust crosscut saw without the need to use compressed air to operate the machine. The machine offers an ideal solution for sawmills, primary processing of lumber, but also for any production that works with long prisms and needs to be precisely shortened to size, such as in the production of windows and doors. Thanks to the convenient, smooth stroke speed regulation, it is possible to simultaneously cut board material and prisms to size even with a weaker motor. Technical parameters: Motor power: 3 / 4 / 5.5 / 7.5kW Disc diameter: 500mm Cutting speed: 2 - 6s. Maximum cutting height: 150mm Maximum cutting width: 350mm Individual cutting parameters can be customized. The price includes basic tables 2 + 2 m There is also a wide range of extension table configurations to choose from, whether it is digital stops, controlled stops, etc. Blodpfx Akex Ut H Totop

Year of construction: 1994, condition: ready for operation (used), A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Bedsv Exthspfx Aktjlp

Condition: used, Year of construction: 2016, type of input current: three-phase, input voltage: 400 V, control voltage: 24 V, input current: 202 A, input frequency: 50 Hz, We offer this used KHS INNOPACK SP A-M Innopack Kisters SP Advanced shrink-wrapping machine, manufactured in 2016. Supply voltage: 400 V Frequency: 50 Hz Power supply type: 3/N/PE Rated current: 202 A Control voltage: 24 V DC Bjdpfozdtr Sex Aktslp Supply fuses: 250 A Short-circuit current: kA If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2017, functionality: fully functional, FOR SALE – COMPLETE KUZIK BR400T AUTOMATIC NATURAL STONE SPLITTING LINE – 400 TON WRKB-GRANIT Sp. z o.o. offers for sale a complete industrial production line designed for precise splitting of large-format natural stone. The system combines heavy-duty material handling, computer-controlled positioning, a 400-ton hydraulic stone splitter, hydraulic manipulator and receiving system into one integrated production process. MAIN PARAMETERS: • Splitting force: 400 tons / 400,000 kg • Splitting head length: 1,500 mm Bedpfx Akjz Adw Ajtjlp • Maximum material height: 500 mm • Maximum feeder capacity: 10,000 kg • Maximum hydraulic pressure: 350 bar • Cylinder stroke: 510 mm • 52 splitting knives • Pump capacity: 130 l/min • Oil tank: 390 l • Main splitter motor: 11 kW • Power supply: 400 V / 50 Hz • Main splitter weight: 10,500 kg COMPLETE LINE – 6 INTEGRATED MODULES: 1. Roller loading table Heavy-duty loading system for large natural stone slabs. 2. Two-speed feeding table ST 4000 × 1200 Working area: 1,200 × 4,000 mm Maximum capacity: 10,000 kg Travel speed: 7 m/min 3. Computer-controlled positioning module Provides precise and repeatable material positioning. Equipped with operator panel, light curtain and magnetic safety gates. 4. KUZIK BR 1500 × 500 × 400T hydraulic stone splitter 400-ton splitting force, 1,500 mm splitting head, maximum material height 500 mm and 52 splitting knives. The splitting process is programmable and repeatable. 5. MP-1200 × 500 hydraulic manipulator Maximum capacity: 500 kg Working reach: 1,800 mm Designed for positioning and handling stone during production. 6. Receiving table 4000 × 1200 Includes hydraulic turntable and production waste removal system. AUTOMATED PRODUCTION PROCESS The offer includes the COMPLETE INTEGRATED PRODUCTION LINE, not only the stone splitter. The system integrates material loading, transport, positioning, hydraulic splitting, manipulation, receiving and waste removal. The technology was developed in cooperation between WRKB-GRANIT, KUZIK and Wroclaw University of Environmental and Life Sciences. According to project documentation, the technology provides: • approx. 14–18% lower electricity consumption per production unit • approx. 11–16% lower noise during splitting • improved raw material utilization • increased production repeatability • reduced manual material handling SALE INFORMATION: Year of manufacture: 2017 Condition: Used Price: EUR 280,000 NET / excluding VAT Location: WRKB-GRANIT Sp. z o.o. Morawa 37, 58-150 Strzegom, Poland The complete line is available for inspection by appointment. Operating videos and full technical catalogues are available in ENGLISH and POLISH. he seller will dismantle and load the complete line onto the buyer's vehicle at the seller's premises. The buyer is responsible for arranging and paying for suitable transport. Additional photographs and technical information are available upon request. International buyers are welcome.

Condition: good (used), Year of construction: 1972, Milling machine with 2 spindles and a table that can be moved vertically to accommodate 4 tools. The spindles can be moved hydraulically forward and backward, as well as up and down. Spindle diameter: 40 mm, clamping length: 200 mm. Additionally, a slotting saw is mounted on top. Blsdogmnzlspfx Aktjp

Condition: used, The Weinig Unimat 23 SP automatic planing and splitting machine is designed for the precise planing or pre-planing and splitting of solid timber in a single operation. With four spindles, a working width of 230 mm and a working height of 120 mm, the machine is suitable for efficient processing in the timber industry. Technical data: - Spindles: 4 - Working width: 230 mm - Working height: 120 mm - Spindle 1: Bottom (5.5 kW) - Spindle 2: Top (5.5 kW) - Spindle 3: Right (11 kW) Blodpozrxywefx Aktsp - Spindle 4: Left (11 kW) - Feed: 5.5 kW

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Machine number: 559969 Manufacturer: HOMAG Model: PROFI BAZ 723/42/18/KC Year of manufacture: 2004 Technical details: Weight approx.: 10000 [kg] control: PC85 [] Dimensions (l x w x h) approx.: 39000 x 3200 x 3200 [mm] c-axis: ja / yes [] software: WoodWOP [] working length x-axis: max. 4.200 [mm] working width y-axis: max. 2.075 [mm] main spindle: 2x 14,5 [kW] tool changer: 2x 18-fach / 2x 18-fold [] vacuum pump: 2x 100 [cbm/h] edge gluing unit: ja / yes 360° [] path-feed rate max. X-axis: 80 [m/min] path-feed rate max. Y-axis: 60 [m/min] path-feed rate max. Z-axis: 40 [m/min] Item Description Bljdpoxvy Ukjfx Aktsp High-End-equipped, technically well maintained HOMAG PROFI BAZ 723/42/18/KC CNC Machining Center in portal design with 360° edge glueing unit, 2 main spindle with C-axis, automatically positionable clamping consoles and HOAMG Optimat TBP 370 vacuum feeder in in portal design. The original price was approx. 620.000 EUR. Technical data and equipment of the HOMAG Profi BAZ 723 CNC: - Workpiece length for single operation max. 4.200 mm - Workpiece length cutter Ø 25 mm for pendulum operation max. 2.040 mm - Workpiece length glueing for pendulum operation max. 1.850 mm - Workpiece width (cutter Ø 25 mm) max. 2.075 mm - Workpiece width (glueing) max. 1.950 mm - Workpiece width (all aggregates) max. 1.850 mm - Console table KC-System 2 pieces left/right automatic positioning of the consoles and vacuum clamps - First main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Second main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Edge gluing aggregate 360° glue with butt joint mounted on the right side of the portal with Y-axis drive Drive spindle with C-axis edge height max. 65 mm edge thickness 0,4 - 3 mm pre-cutting station and 2-fold roller magazine - Chip conveyor belt for automatic disposal with ascending conveyor (The tools, the HSK holders and the units for the tool changer are not included within delivery. A transport rack from HOMAG is required for transportation of the dismantled machine. Terms of payment and delivery Delivery terms: ex foundation, unpackaged Payment terms: 100% before loading Warranty: Without any warranty

Condition: used, Year of construction: 2009, operating hours: 17,469 h, load capacity: 45,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 4,810 mm, gearing type: automatic, Equipment: cabin, head guard, COMING SOON!!! CVS Ferrari F478 Reach Stackers Technical Vehicle Data* Manufacturer: CVS Ferrari * Type: F478 * Drive Type: Diesel Bjdpfxjy D Dmio Aktelp * Load Capacity (LSP): 45,000 kg * Operating Hours: 17,080 hrs. * Year of Manufacture: 2009 * Tare Weight: 7,100 kg ----Mast Data / Dimensions:* Mast: Telescopic * Lifting Height: 16,020 mm * Overall Height: 4,810 mm ----Engine, Transmission & Performance:* Engine: Scania DC1258A * Transmission: Torque Converter * Power: 257 kW ----Tires:* Front Tires: Air Dual, Size 18.00-25, Condition 40-60% * Rear Tires: Air Single, Size 18.00-25, Condition 60-80% ----Equipment & Attachments:* Attachment: Side Shifter 20/40, Hydraulic Spreader * Special Equipment: Full Cab ----Vehicle Number/Vehicle: 12015----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicleTÜV/SP inspectionComplete export processingArrangement of financingApplication for export license platesVehicle transportRegistration of vehiclesRecovery and vehicle transport----?YOUR VTS TEAM

Condition: used, Year of construction: 2006, Overview This KHS Innopack SP, built in 2006, is a pick-and-place case packer for bottles. Empty cases run on the case conveyor into the packing zone, where they are stopped and centred; the gripper head picks the bottle formation from the four-lane infeed table and sets it into the cases. The lifting unit travels on a vertical lifting column with counterweight, and the motion is controlled by a KUKA KR C2 controller with KCP teach pendant. Four change-part trolleys with gripper heads for different bottle sizes are included. The packer is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack SP - Year of manufacture: 2006 - Machine type: pick-and-place case packer - Bottle infeed: 4 lanes, lane width 85 mm - Gripper head: 2 x 18 bottle tulips, formation 3 x 6 bottles - Case clearance: 175 x 400 mm - Power supply packer: 400 V, 3 Ph, 50 Hz, 27 A - Robot controller: KUKA KR C2, 400 V, 3 Ph, 50/60 Hz, 8 A - Overall dimensions (L x W x H): 6,000 x 3,250 x 3,650 mm - Change-part trolleys: 4 units, each 2,050 x 1,300 x 2,100 mm Equipment - Base frame with lifting column, counterweight and lifting unit - Cross conveyor and shifting carriage for the gripper head - Gripper head with pneumatic bottle tulips - Centring device for the cases in the packing zone - Four-lane bottle infeed table with lane guides - Case infeed and outfeed conveyors - Enclosure with windowed doors and safety fencing - KUKA KR C2 controller cabinet and KCP teach pendant on stand - KHS control cabinet - 4 change-part trolleys with gripper heads for different bottle sizes - Operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Blsdjz Hbxiepfx Aktjp Available immediately. Location: Belgium.

Year of construction: 2001, condition: used, functionality: fully functional, Bobst Autoplatine SP 104-ER (2001) Automatic die-cutting machine for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The machine is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop operation and a pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system, with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment ### Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centering at stripping and delivery stations Control cabinet cooling unit Gripper bars Bobst C.U.B.E. electronic machine operating system Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at the stripping station Bernoulli sheet braking device at the delivery station Motor with frequency converter control Blsdpfx Ako Afv Szstsp ### Feeder Pile tray with handle for lateral adjustment during production Pile height adjustment with front photocell Rear pile guides (OS and OOS) Side blowers adjustable with Centerline marks Suction unit with multiple adjustments Vertical adjustment of the suction head Automatic lateral pile correction Manual non-stop device Synchronization of sheet arrival against the front lays Safety system for lowering the pile tray ### Feed Table Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard, and corrugated board up to 4 mm 4 laterally guided transport belts ### Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm 3x upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centering, ±0.9 mm Lowering of the chain guides ### Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size (with gripper margin): 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size: 1,200 x 800 mm ### Net Weight 20,000 kg ### Electricity Main motor 11 kW, total connected load max. 25 kVA ### Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Condition: excellent (used), VETTER SP 16 rescue air cushion – designed for fire brigades and rescue services for evacuating people from heights. Equipment by the renowned German manufacturer Vetter (IDEX Corporation) – used globally by professional and volunteer fire services. --- 📊 Technical data: • Model: SP 16 • Type: rescue air cushion (Sprungkissen) • Standard: DIN 14151 Part 3 • Rescue height: up to approx. 16 m • Year of manufacture: 2011 • Manufacturer: Vetter GmbH – Made in Germany --- 🛠️ Condition: • used • complete • includes documentation (service logbook + manual) • latest service records visible in the logbook • normal signs of use --- 📦 Scope of delivery: Blsdpjz Sl Hdefx Aktep • VETTER SP 16 rescue air cushion • documentation / inspection logbook (Prüfbuch) • user manual --- 🚒 Applications: • fire brigades (professional and volunteer) • rescue services • training and drills • securing facilities --- ⭐ Benefits: ✔ professional rescue equipment ✔ Vetter German quality ✔ high efficiency and safety ✔ complete documentation --- 🚚 Transport: Transport or personal collection possible Assistance with shipping arrangements provided

Condition: used, maximum load weight: 16,630 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 07/2019, next inspection (TÜV): 04/2026, total length: 11,230 mm, total width: 2,550 mm, total height: 3,405 mm, Equipment: ABS, * TRIDEC ST-1510-TTDK forced steering system * EDSCHA sliding roof * Rear roller shutter * Fixed front bulkhead ----* Tire size: 275/70R22.5 * Technically permissible total weight: 22,000 kg * Unladen weight: 5,370 kg * Overall length: 11,230 mm * Next inspection due: / ----Vehicle number: 12535----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arranging financing, applying for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services.----?YOUR VTS TEAM Bodpfxs Ahd Ehj Aktjlp

Condition: excellent (used), mileage: 2,78,185 km, power: 243 kW (330.39 HP), first registration: 01/2008, axle configuration: 6x4, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, loading space length: 5,600 mm, Equipment: crane, power mirror, trailer coupling, = Additional options and accessories = - Air-suspended seats - Beacon(s) - Gullet - Leaf spring - Radio/CD player - Sper - Tipping hydraulics = Remarks = Trailer Width: 246 cm Height: 0.95 cm Superstructure Material: Staal Crane Hours: 3963 uur Number of hydraulic extensions: 2 Number of manual extensions: 1 Number of support legs: 2 Remote control: ✓ Load Hook: ✓ = More information = General information Number of doors: 2 Year of construction: 2008 Cab: single Registration number: 19-SP-71 Axle configuration Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Blodpfjzli Ixjx Aktep Empty weight: 15.523 kg Carrying capacity: 10.477 kg GVW: 26.000 kg Functional Crane: HIAB 220 C-1, year of manufacture 2007, behind the cab Extendable superstructure: Yes Tipper: Left / Right / Back Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Year of construction: 1989, operating hours: 55,929 h, condition: used, functionality: fully functional, Manufacturer: BOBST SA, Switzerland Model: AUTOPLATINE SP 142-E Year of Manufacture: 1989 Machine Type: Automatic Die-Cutting Machine Technical Specifications Operating Hours: 55929 h Non Stop sheet inserter Centerline System: Yes Delivery (automatic) Bljdsz Tzvijpfx Aktop Maximum Sheet Size: 1,020 × 1,420 mm Minimum Sheet Size: 500 × 700 mm Maximum Production Speed: 6500 sheets/hour Maximum Die-Cutting Force: 600 tons (6 MN) Suitable Materials Cardboard: 80–2,000 g/m² Corrugated Board: F, E, R, B, FF, FE, FB and EE flute types

Condition: used, empty load weight: 4,000 kg, maximum load weight: 4,300 kg, overall weight: 8,300 kg, axle configuration: 1 axle, first registration: 05/2013, loading space length: 13,380 mm, loading space width: 2,470 mm, loading space height: 2,350 mm, suspension: air, tire size: 235/75R17,5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 1 axle, air suspension, lift and lower function, ABS (anti-lock braking system), Edscha, doors, lashing eyes, side protection, lateral aluminum side guards, supports. Bledpfei Rrq Rsx Aktjp Body: Flatbed + tarpaulin semi-trailer with Edscha cover and double-wing doors. Matching MAN SZM available for an additional price of €24,900.00 (net)! Spare wheel available for an additional price! GFA axle is steerable! Loading height approx. 1112 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, empty load weight: 3,490 kg, maximum load weight: 4,810 kg, overall weight: 8,300 kg, axle configuration: 1 axle, first registration: 04/2013, loading space length: 10,020 mm, loading space width: 2,460 mm, loading space height: 2,340 mm, suspension: air, tire size: 235/75R17,5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, tail-lift, Vehicle location: Bovenden, 1 axle, air suspension, lift and lower function, ABS (anti-lock braking system), Edscha, lashing eyes, wheel arch protection, side aluminum fender, supports, aluminum loading platform, upright. Body: Flatbed + tarpaulin semi-trailer with Edscha cover and 1.5t Dhollandia DH LM15 loading platform. Matching MAN tractor unit available for an additional price of €24,900.00 net! Spare wheel available for an additional price! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Bedoi Rrrgepfx Aktslp

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, clamping force: 490 kN, screw diameter: 22 mm, injection pressure: 3,487 bar, injection weight: 42 g, ejector force: 26,000 N, ejector stroke: 60 mm, total length: 2,650 mm, total width: 1,574 mm, total height: 2,858 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Witam Sprzedam stanowisko zrobotyzowane składające się z wtryskarki oraz robota przemysłowego FANUC M-10iD/10L, wykonane przez firmę WJATECH w 2023 roku. Stan idealny, bardzo mały przebieg: robot – zaledwie 132 minuty pracy, czyli 2 godziny i 12 minut, wtryskarka – kilkaset godzin pracy. Dane stanowiska: producent: WJATECH Sp. z o.o., typ: WJA-E235P-A-SR, rok produkcji: 2023, masa: 4600 kg, moc zainstalowana: 13 kW, zasilanie: 3 × 400 V, 50 Hz, Bodpfxj Agvtwj Aktjlp prąd: 32 A, ciśnienie robocze instalacji pneumatycznej: 6 bar, zapotrzebowanie na sprężone powietrze: 1200 Nl/min. Robot przemysłowy: producent: FANUC, model: M-10iD/10L, data produkcji: sierpień 2021, typ: A05B-1227-B322, masa robota: 150 kg. Oferta dla firm poszukujących stanowiska do automatyzacji produkcji z minimalnym czasem użytkowania. Cena do negocjacji

Condition: good (used), Diosna SP 80 spiral mixer - used Blodpfx Aks Agvppjtjp - 80 kg dough capacity - 2 speeds - 2 timers - stainless steel bowl and spiral - from a production facility / bakery condition - belts and possibly bearings need to be replaced - collection from warehouse / shipping option available - price on request

Condition: excellent (used), Year of construction: 1997, Romanian Lathe SARO SPS 1250x9000, Manufacturer: Saro Targoviste, Year of Manufacture: 1997. Chuck diameter: 1250 mm, Maximum swing over bed: 1250 mm, Spindle diameter: 250 mm, Distance between centers: 9000 mm, Maximum swing over slide: 920 mm, Maximum workpiece weight between centers: 15,000 kg. Grinding attachment available! Video of the machine under power available. Weight approximately 25 tons. Blodpsy Icbaefx Aktjp

Condition: used, ELB PERFEKT BD 8 SPS is a surface grinder engineered for precision, high accuracy and reliability. Capacities: table 1360×590 mm; grinding length 1250 mm; max grinding 600×400 mm; travels X900 Z540 Y400; table load 900 kg. Specs: wheel 400×100 mm, 1440 rpm, bore 127 mm, spindle cone 60 mm; grinding spindle motor 20 kW; supply 3×400 V 50 Hz; total power 18.5 kW; machine weight ≈5400 kg. Accessories: paper filtration, electrical magnetic chuck 1200×600 mm, redressing device, lamp, central lubrication. Achieves tight tolerances; ideal for automotive, aerospace, tooling, medical and watchmaking. Bedpfoyxn Igex Aktelp

Condition: good (used), Diosna SP 120 spiral mixer - used - 120 kg dough capacity - 2 speeds - 2 timers - stainless steel bowl and spiral hook - machine in good working condition / bakery condition Bodo Agvp Espfx Aktslp - collection from warehouse / shipping option available - price on request

Condition: used, maximum load weight: 22,310 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 11/2003, next inspection (TÜV): 11/2026, loading space length: 13,530 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 89 m³, Year of construction: 2003, Equipment: ABS, 2-axle Schmitz Cargobull SKO 18 insulated box semi-trailer VIN: WSMS7160000454173 Chassis / Components: * Jost support legs * Air suspension / lifting and lowering * 2 x SAF axles with disc brakes * ABS / EBS * Tires: 385/65 R22.5 * Remaining tread: approx. 60-70% * 15-pin electrical connector * 2 x 7-pin electrical connector * 2-line compressed air connection * 1 x storage box * Spare wheel Body: * Schmitz insulated box * Closed box body * Rear roll-up door * L x W x H: 13.53 m x 2.49 m x 2.65 m * Cargo space: approx. 89 m³ * Load securing rails on both sides * Diamond-plate flooring in the rear area Weights: * Gross vehicle weight: 29,000 kg * Unladen weight: 6,690 kg * Payload: 22,310 kg Other: * First registration: 11/14/2003 * MOT: 11/2026 * SP: We won't leave you alone even after the purchase: We will help you obtain export or short-term registration plates. Transporting your vehicle within Germany is also possible. Just contact us – we will be happy to help! We speak German, English and Russian. All information without guarantee. Subject to changes, errors, printing and spelling errors, and prior sale. ---About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sale of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. For us, it's not just about the vehicle, but also about the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably – from the first contact to the handover of your vehicle. See for yourself. We look forward to your inquiry! ---Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports Blede Afa Exjpfx Aktsp We will support you in organizing special transports. Export and short-term registration plates We will help you obtain export or short-term registration plates. Customs formalities We will also be happy to assist you with customs matters. Vehicle transport If desired, we will organize the transport of your vehicle within Germany.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 8-2, mileage: 23,969 km, power: 265 kW (360.30 HP), first registration: 12/2013, fuel type: diesel, overall weight: 22,000 kg, axle configuration: 4x4, color: yellow, driver cabin: day cab, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2013, operating hours: 1,724 h, Equipment: EBS, power assisted steering, seat heater, equipped with a Zaugg SP 3000-800-5-C snowplow Blodpe Ad Rvxsfx Aktsp Ready for operation.

Condition: used, Siemens PLC SCALANCE X212-2 6GK5212-2BB00-2AA3 RA2287 Manufacturer: Siemens Model: 6GK5212-2BB00-2AA3 Condition: Used Transmission rate: 10 Mbit/s, 100 Mbit/s Interfaces Number of electrical connections for network components or end devices: 12 Number of 10/100 Mbit/s RJ45 ports / integrated with retaining collar: 12 Number of 100 Mbit/s ST(BFOC) ports for multimode: 2 Operating voltage / of the signaling contacts at DC / nominal value: 24 V Operating current / of the signaling contacts at DC / maximum: 0.1 A Maximum current drawn: 0.33 A Design of the electrical connection for power supply: 4-pole terminal block Type of electrical connection for signaling contact: 2-pole terminal block Bodpfx Ajtp Tvzjktjlp Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg