Used Stainless Curve for sale (6,891)

Condition: used, tank capacity: 200 l, GENERAL INFORMATION Equipment: Butterfly valve Design: upright Remarks: Hand lever for butterfly valve missing Inner diameter: 600 mm Knedpfx Aox Dlvisansf Total height: 1,800 mm Power: 0.75 kW Top cover: welded lid with folding segment Agitator: propeller Base type: mobile on castors Location: Bremen Nameplate: Volume: 200 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Last application: pharmaceutical industry TANK Number of legs: 4 pcs EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATIONS Leg material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 volts Agitator arrangement: eccentric in top cover Agitator equipment: speed control via frequency converter (see photos)

Condition: used, Used Breddo model LORWW 100 US gallon (378 litre) capacity stainless steel vertical jacketed mixing vessel/Likwifier. Has approximately 1200mm diameter X 470mm deep tank with welded cone bottom and flat open top with hinged lids. Has approximately 250mm diameter bottom entry general purpose impeller belt driven by 30 hp 415 volt 3/50 1500 rpm motor with Allen-Bradley Powerflex 70 inverter drive. Also includes baffle bar. External jacket rated 125 psi (8.6 bar) working pressure at -20/+400 degf (-29/204 degc). Mounted on stainless steel mobile base with diaphragm pump local controls. Knsdpfx Ajx Hwb Ssanjf Specifications: Capacity: 100 gal Diameter: 3.94' Height: 1.54' Vertical/Horizontal: Vertical Type of stainless: Stainless Steel Legs/Lugs: Mounted on stainless steel mobile base

Condition: used, tank capacity: 1,00,000 l, GENERAL Equipment: Crane lugs Design: Vertical Internal diameter: 4,000 mm Total height: 8,950 mm Support type: Feet Location: Outdoor storage Technical documentation: Drawing Volume: 100,000 litres Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 7,000 mm Last intended use: Fruit juice TANK Number of feet: 8 pcs Knodpfxox Dlvco Aansf EQUIPMENT Manway / Dome: In cylinder Outlet: 70 mm MATERIAL SPECIFICATION Feet material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Top wall thickness: 4 mm

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Capacity: 4,000 L Diameter: 1,800 mm Straight Side: 2,450 mm Material of construction: Stainless Steel Type Of Heads: Welded Dished Top and Bottom Internal Pressure: 6 bar Knodox Hwbxspfx Aanof Jacket Pressure: 9 bar Internal Temperature: 130°C Type of stainless: Stainless Steel Legs/Lugs: 4 Lugs

Condition: used, tank capacity: 2,200 l, GENERAL INFORMATION Remarks: 1 welded stainless steel strut over the tank opening; 1 tank with 1 dent at the transition between cylinder and conical bottom (see photos) Internal diameter: 1,490 mm Total height: 2,450 mm Top: open Location: Bremen Volume: 2,200 litres Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,190 mm Last application: food TANK Lower bottom: conical bottom EQUIPMENT Note: outlet cut off Knjdpfox Dlu Ejx Aanef Outlet: 150 mm

Condition: used, Reportedly unused 304 stainless steel vessel manufactured by ROLEC Prozess und Brautechnik GMBH. New 2015. Total volume 160,000 litre, useful capacity 120,000 litre. Max. working over pressure 0,9 bar (15 PSI)-Conical angle: 70 °-Double jacket. Vessel :Material: stainless steel 1.4301 (304) - Tank support: 4 stainless steel feet with floor plates Cooling :Cooling liquid: glycol - Water temperature: -3°C - Cooling section cone: 1 - Cooling surface of the cone: 12 m² - Cooling surface of the side walls: 48 m² Vessel dimensions :Inner Ø : 3900 mm (12' - 9 5/10") - Outer Ø : 4100 mm (13' - 5 4/10") - Shell height : 9000 mm (29' - 6 3/10") - Cone outlet height : 1000 mm (3' - 3 4/10") - Total height : 13600 mm (41' - 0 1/10") plus platform and fittings - Various inlets and outlets Specifications: Capacity: 31,700.6 gal Diameter: 13.12' Height: 44.62' Type Of Heads: Conical Vertical/Horizontal: Vertical Type of stainless: 304 Legs/Lugs: 4 stainless steel feet with floor plates Knodsx Hv Ttjpfx Aansf

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: spray head Design: upright Remarks: Manhole diameter 420 mm; 2 longitudinal sight glasses in the cylinder; outlet fitting (disc valve) incomplete Inner diameter: 1,040 mm Total height: 2,350 mm Agitator: agitator flange Base type: height-adjustable feet Ksdpfjx Dluxsx Aansnf Location: Bremen Volume: 1,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,190 mm TANK Number of feet: 4 pcs EQUIPMENT Manhole / Dome: on the top cover Outlet: 60 mm MATERIAL PROPERTIES Feet material: stainless steel AGITATOR 1 Agitator arrangement: eccentric on top cover

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Kjdox Hv U Rspfx Aanenf Specifications: Power: 11 kW

Condition: used, tank capacity: 2,200 l, GENERAL Equipment: crane lugs Design: vertical Remarks: Manhole diameter approx. 465 mm; cone height approx. 650 mm; discharge fitting no longer available Knedpfsx Dlulex Aanof Internal diameter: 1,290 mm Total height: 3,100 mm Agitator: agitator flange Stand type: height-adjustable feet Location: Bremen Volume: 2,200 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,500 mm Last application: foodstuff TANK Bottom: conical bottom Number of feet: 3 pcs EQUIPMENT Manhole / access: top head Note: minor residues Outlet: 70 mm MATERIAL SPECIFICATION Leg material: stainless steel AGITATOR 1 Agitator arrangement: eccentric in top head

Condition: used, Comprehensively tested, used Winkworth reportedly model GU660 stainless steel ribbon blender. Manufacturer: Winkworth Material: Stainless steel Capacity: 660 litre (product dependent) Mixing trough: 1,750mm long x 700mm wide x 790mm deep Discharge Type: air operated discharge value Type Of Blades: single interupted ribbon Motor: 7.5kw, 1450rpm, 415volt, 3/50 motor through Opperman type HTM7 gearbox rated 38.2/1 reduction rated, 37rpm output. Knodpfx Ajx Hv Uwjanof Also includes: Hinged lid with clamps. -Control panel with castell key interlock. -Mild steel mobile base. A video of this mixer is available below. Specifications: Capacity: 23.3 ft³ Material of construction: Stainless steel Width: 27.56" Horsepower: 10 hp Length: 68.9" Dimensions: 68.90in x 27.56in x 31.10in

Year of construction: 2020, condition: used, tank capacity: 2,700 l, GENERAL INFORMATION Equipment: Disc valve, spray head Design: upright Year of construction: 2020 Notes: Stated total height according to drawing; CE marking and declaration of conformity available only for 2 vessels External diameter: 1,650 mm Internal diameter: 1,450 mm Total height: 2,550 mm Heating/cooling: available Insulation: available Max. allowable operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Base type: height-adjustable feet Location: outdoor storage Technical documentation: drawing, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Volume: 2,700 litres Double jacket volume: 10.0 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,250 mm Previous application: brewery VESSEL Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: stainless steel EQUIPMENT Manhole / dome: in cylinder Outlet: DN32 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel Knjdpfx Aaox Dlpcsnjf

Condition: used, Comprehensively tested and refurbished, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 750 litre Mixing trough: 1000mm wide x 1500mm long Discharge Type: pneumatically operated twin bomb door discharge Type Of Blades: Twin shaft paddles Motor: 15 kw 415 volt 3/50 motor Also includes: Mild steel frame A video of this mixer is available below. Kodpjx Hv Uqofx Aanjnf

Condition: used, tank capacity: 1,020 l, GENERAL Design: horizontal Remarks: Cooling system consisting of a copper pipe installed along the entire length of the tank; various manufacturers, therefore slight differences in design (for example, the tank from manufacturer Müller has a different frame and varying pressure ratings compared to the other two tanks, see photos) Heating/Cooling: available Insulation: available Max. permitted operating temperature: 50 °C Max. permitted operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Stand type: Frame Location: outdoor storage Nameplate: Volume: 1,020 liters Double jacket volume: 3.0 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: brewery TANK Max. permitted operating temperature: 50 °C INSULATION Insulating jacket: hermetically welded Ksdpox Dln Sefx Aanjnf Insulation material: PU foam Insulation jacket material: stainless steel FEATURES Manhole / Dome: handhole MATERIAL SPECIFICATION Temperature control system material: copper

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2016 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. A video of this mixer is available below. Knjdpox Hv Ukjfx Aanjf Specifications: Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: used, GENERAL INFORMATION Speed: 690 / 1410 rpm Explosion protection: The motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Impeller diameter: 130 mm Power: 2.6 / 4.4 kW Agitator: Disperser Other: Shaft material: 1.4401 (V4A) Stator basket material: 1.4541 (V2A) Total length approx. 1,450 mm Location: Bremen Ksdpfex Dln Eox Aanjnf Shaft diameter: 30 mm Shaft length: 770 mm Condition: used AGITATOR 1 Voltage: 380 Volt

Condition: used, Used Oliver & Batlle model HM-15 stainless steel bead mill. Has stainless steel jacketed chamber which measures approximately 450mm long x 250mm diameter. Approximate total capacity 15 litre (product dependent). Kodpsx Hv Udjfx Aanenf This equipment has a stainless steel rotor belt driven by 18.5kw, 415volt, 3/50, 1460rpm motor. Click on the link below to see a video of the machine running.

Condition: used, GENERAL Impeller diameter: 200 mm Agitator: Propeller Other: Total length approx. 1,060 mm Knedpfxox Dlnrj Aanjf Location: Bremen Shaft diameter: 35 mm Shaft length: 910 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used

Condition: used, Unused from new Caldereria Teruel (Spain) approximately 1,000 litre 316L stainless steel IBC. Internal measures approximately 1110mm diameter X 1230mm straight side. Mounted on stainless steel forkliftable base. Hinged manway lid on top dish with fast release clamp. 40mm side bottom discharge with valve. Includes 12 months warranty. In stock and immediately available. Specifications: Material Grade: 316L Stainless Steel Kjdpex Hv T Tofx Aansnf Dimensions: 1110mm diameter X 1230mm straight side

Condition: used, tank capacity: 1,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Remarks: 1 ventilation line inside the vessel; outlet reduced via several fittings to an internal diameter of approx. 19 mm; mobile frame made of V2A Speed: 389 rpm External diameter: 1,250 mm Internal diameter: 1,200 mm Overall width: 1,900 mm Overall height: 2,850 mm Overall length: 1,700 mm Heating/cooling: available Power: 7.5 kW Max. permissible operating temperature: 150°C Max. permissible operating overpressure: 3.5 bar Max. overpressure: 4.0 bar Agitator: Disc agitator Base type: mobile frame Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,000 litres Double jacket volume: 64.0 litres Product-contact material: V4A 1.4401/04 (AISI 316) Condition: used Last application: fermenter in a biotechnology company VESSEL Max. permissible operating temperature: 150°C HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Outlet: available MATERIAL SPECIFICATION Temperature control system material: V4A 1.4401 (AISI 316) AGITATOR 1 Voltage: 400/690 V Interference suppressor: Knodpex Dlnlsfx Aansf Agitator arrangement: centrally mounted on top head Agitator equipment: mounting and operating instructions for the agitator are available

Condition: used, Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & screen. Unit direct driven with motor/gearbox. Has approximate throughput capacity of 30,000 l/h (product dependent). Equipped With: Per RD 13/06/25 on hold for CcM Technologies, UK. Knsdpfx Asx Hv T Hjanof

Condition: used, tank capacity: 318 l, GENERAL INFORMATION Design: vertical Remarks: Radii of the heating coil inside the tank (see photos); handhole diameter approx. 300 mm Outer diameter: 880 mm Inner diameter: 740 mm Total height: 1,550 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: agitator flange Base type: feet Location: Bremen Kedpfx Aaox Dlnfonjnf Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 318 litres Double jacket volume: 21.0 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: cosmetics TANK Max. permissible operating temperature: 143 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: handhole Outlet: 38 mm MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) Feet material: stainless steel AGITATOR 1 Agitator arrangement: eccentric on the top head

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Kodpfx Aasx Hv Tysnenf Click on the link below to see a video of the machine running.

Condition: used, Year of construction: 2022, tank capacity: 150 l, GENERAL Equipment: Control cabinet (without guarantee) Design: upright Year of manufacture: 2022 Speed: 1500 RPM External diameter: 770 mm Kedpfox Dlm Uex Aansnf Internal diameter: 610 mm Total height: 1,650 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 80 °C Max. permissible operating overpressure: 1.5 bar Max. overpressure: 1.5 bar Agitator: propeller type of base: mobile on castors Location: external storage Cylinder temperature control: double jacket Nameplate: Volume: 150 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: unused TANK Max. permissible operating temperature: 70 °C Number of legs: 4 pcs HEATING / COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 50 mm EQUIPMENT Manway / Dome: handhole Outlet: available MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Leg material: stainless steel AGITATOR 1 Agitator arrangement: eccentric, in top cover

Condition: used, Used Alfa Laval model BTPX 205SGD-34CDP-50 stainless steel clarifier centrifuge. Skid mounted system with steam sterilization provision. Direct driven by 6.5 kW 415V 3/50 2900 rpm motor. Maximum bowl speed 9650 rpm. Includes some tools. Knjdpfxjx Hv Tme Aanef

Condition: used, tank capacity: 30 l, GENERAL Design: vertical Speed: 27.9 - 142.9 rpm Total width: 1,000 mm Total height: 1,680 mm Total length: 1,500 mm Heating/Cooling: available Power: 0.37 kW Max. permissible operating temperature: 151 °C Max. permissible operating pressure: 4.0 bar Max. overpressure: 1.0 bar Top cover: removable/hinged top cover Agitator: anchor agitator Agitator tool: homogeniser Mounting type: frame Nameplate: Vacuum: 1.0 bar Volume: 30 litres Jacket volume: 1.6 litres Condition: used Last application: pharmaceutical VESSEL Max. permissible operating temperature: 120 °C Bottom: conical bottom AGITATOR 2 Agitator arrangement: bottom-mounted AGITATOR 1 Voltage: 220/380 Volt Knedpjx Dlm Iofx Aanjf Agitator arrangement: centrally mounted in the top cover Agitator equipment: anchor agitator with Teflon scrapers; the drive power of 10 kW indicated on the nameplate most likely refers to the homogeniser