Used Steel for sale (16,560)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,500 h, lifting height: 14,000 mm, overall weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled 14 meter crawler articulated work platform for 200kg and 120kg with electronic scales for sale! only 78cm clearance width and 1.95m clearance height! 2-man basket with 1.4m width, can be removed from the ladder with 2 bolts! Power and compressed air connection is available in the basket and can be used Can be operated almost silently with petrol or 230V power (so work is also possible at weekends) all functions (driving, supporting, lifting etc.) can be done with electricity as well as petrol! Good condition, white non-marking crawlers, every service carried out! functional and ready for use! (currently TÜV expired) a current TÜV inspection can also be issued on request. If you have any questions, just call or send an email Kwedevmbzqspfx Abcsw

Condition: reconditioned (used), Sorting machine overhauled and ready for operation the price is depending on condition and equipment, software and hardware status 2008 - 2014 they like to come with material for trial sorting. the machines are for slag, shredder residue, residual fractions, cable, aluminum, Va, Ne about 12-120mm depending on the fraction 1-2 screen cuts should be made. Functionality induction and magnetizability, discharge with air approx. 3- 9 to throughput depending on material up to 40 to Kjdpfjt Rv Naox Abcoww

Condition: good (used), functionality: fully functional, Used stainless steel auger for sale. This auger was used for dipping diced potato in a preservative before packing but not limited to this. Kwjdpsvkximsfx Abcjw

Condition: good (used), Rarely available. Idaho Little Gem 40" former for the production of potato croquettes etc. These are the industry standard machines used to produce for the World's leading fast food chains etc. Kwodpfxeigrvpo Abcsw

Condition: good (used), Dimensions belt: 2.960 length, 600 width, 1.030 heighth. Kwjdjtu Hhxjpfx Abcew

Condition: new, thickness of jaw 200 mm max. clamping width 205 mm weight of the machine ca. 21 Kg dimensions 430x200x195 mm Workbench vice with: Set of pipe jaws Kwodpfju Img Eex Abcow

Condition: good (used), Marel Stainless Steel floor weighing scale Marel weigher indicator M2200-P02 110-230 Vac, 0.24-0.12 A Ksdpox Il Ntjfx Abcoww Dimensions scale: 900 mm x 900 mm.

Condition: good (used), Floor weighing scale K-PZ Weigher indicator Type: KPZ 52E-9-1 Maximum weight: 300 kg Ksdpfxsx Hz Dqe Abcoww Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Including ramp

Condition: used, functionality: fully functional, The sardine eviscerator is an industrial device designed to automate the evisceration process in seafood production lines, specifically for processing sardines and other species of similar size. Its design increases operational efficiency, reduces manual labor and improves process quality. The eviscerator positions each sardine using guides, makes a precise abdominal cut and extracts the viscera using suction, leaving the fish in suspension for subsequent washing and packing. Kwjdpfxswny N Uo Abcjw

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H With manual gate valve Gas strut opening lid Internal stainless mesh screen Mobile on lockable castors Ksdpfx Asurf Twobceww Some with pneumatic vibration device. Some with level sensor device In excellent condition

Condition: good (used), Year of construction: 2011, Fuji Flow Wrapper High speed horizontal form- fill - seal machine Type: FW3410/B Year of construction: 2011 Zodiac HC terminal printer 200 V, 3 Ph, 50/60 Hz, 30 A Belt width: 250 mm, seal length: 300 mm Dimensions: 3360 mm x 1200 mm x 1900 mm. Kwjdpfjv T D D Usx Abcow

Condition: new, 45 to. no. of strokes 24 Hub/min hole diameter in sheet thickness max. Ø 27 in 13 mm 80x80x8 60x60x6 mm flat steel 300x10/200x13 mm 7 mm engine output 2.2 kW range L-W-H 1550x820x1540 mm weight 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment Kwodpfxjyv N Ays Abcew - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device

Condition: new, flat steel 350 x 15 mm round bar steel 35 mm square edge steel 30 mm L-beam 80x80x8 mm hole diameter in sheet thickness Ø 27 in 13 / Ø 20 in 18 mm blade length 356 mm engine output 3.0 kW Kwjdpfx Aoyv Nafobcsw Stroke rate 34 Punching capacity max. 500 kN weight 950 kg dimensions 1300x1100x1850 mm Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm)

Condition: used, Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotation. Mill is equipped with electric cabinet, belt cover and set of screens (6 pcs). Specifications: Horsepower: 75 kW Material Of Construction: Stainless steel Number Of Hammers/Row: 96 hammers / 24 rows Kwodpfx Aboyhc N Aecew Type: "U" type hammers

Condition: used, for sheet thickness up to: 7 mm blade length: 175 mm Round material up to: 20 mm square material up to: 18 mm space requirement: 1000 x 770 x 690 mm Kwodpfsdp U Apsx Abcjw hand-guided

Condition: used, machine/vehicle number: PA 1107, flat steel capacity: 80 x 10 mm electrical connection: 380 V, 1,3 kW space needed: 1000 x 650 x 1480 mm weight: 400 kg Kodpfxeby Dq Ro Abcsww

Year of construction: 1998, condition: ready for operation (used), machine/vehicle number: 2131, Max. pressure: 55 kN Kwsdpfx Aonacy Tebcsw Throat: 175 mm Adjustable punching stroke: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Notching stroke adjustable: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Floor space required: 1170 x 620 x 1470 mm weight: 930 kg

Condition: excellent (used), Cup wheel diameter: 180 mm Cup wheel speed: 2,900 rpm Electrical connection: 380 V, 2,900 rpm, 0.9 kW Kwsdpfxew Tk Nue Abcew Oscillating table dimensions: 200 x 350 mm Oscillating table, tiltable Oscillating table swivels +/- 20° Required space: 750 x 350 x 1,270 mm

Condition: good (used), for sheet thickness up to: 8 mm flat iron: 80 x 12 mm square iron: 20 mm round iron: 18 mm weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame) Kwodpotx Uqasfx Abcow

Condition: used, Year of construction: 1996, 10 mm Punching force 55 to 40x10 mm flat steel 300x15 oder 200x20 mm L-beam 90° 120x120x10 mm Kedpfxsyv N Iio Abceww L-beam 45° 70x70x7 mm 40 mm square edge steel 40 mm 37 /min. throat 250 mm weight of the machine ca. 1.800 kg

Condition: used, Year of construction: 1984, hole diameter in sheet thickness Ø 30 in 12 mm hole diameter in sheet thickness Ø 19 in 19 mm Kwjdpfxsyv N Ebo Abcew pressure capacity max. 45 to weight of the machine ca. 1.700 kg

Condition: used, machine weight ab. 960 kg Kedpfx Aboyv Np Hecsww dimensions 1300 x 800 x 1600 mm

Condition: used, Length: 520 cm Belt width: 50 cm Conveyor width: 62 cm The machine is ready for operation Please check my other listings too Kwjdpeywfcfefx Abcjw

Condition: used, The tank is insulated with 8 cm thick polystyrene, double-jacketed with a steel outer shell and acid-resistant sheet metal inside. Free loading. The tank has a manway, which is not visible in the photo. Kodpfeywfb Uex Abceww

Condition: used, Discharge height: 175 cm Kedpfxeywdzaj Abceww Feeding table size: 115 x 75 cm Total height: 252 cm Total length: 120 cm Total width: 110 cm Please check my other listings as well.