Used Straw Packing for sale (2,830)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, overall weight: 300 kg, product height (max.): 2,000 mm, product height (min.): 600 mm, The Rollertech-E PM 2000 is a machine designed for automatic pallet wrapping where traditional wrapping methods are not possible due to dimensions, load instability or lack of access to a turntable. TECHNICAL DATA • Wrapping height: 2000 mm • Display: 7-inch touchscreen • Control system: PLC controller • Charger: Built-in, high-frequency, 110–240 VAC, 50–60 Hz, 0.4 kW • Power supply: Batteries: 2 × AGM 12V, 85 Ah (24 VDC total) • Performance: Up to 100 pallets (80 pallets for PM version) per charge • Machine weight: 300 kg • Pallet height sensor: Photoelectric sensor • Pallet height: Manually set via control panel • Programs: 99 pre-programmed cycles • Speed adjustment: Lifting, lowering, upper and lower rotation • Photo sensor delay: Adjustable • Cycle types: Lifting; Lowering; Lifting and lowering with reinforcements at defined heights; Start from specific height; Top-only wrapping; Bottom-only wrapping Ppsdpfown Hc Iox Abheu • Password protection: Available for parameter security • Diagnostics: Shown on display • Charging monitoring: Shown on display • Distance from pallet: 110 cm • Minimum pallet weight: 80 kg (without film) • Minimum pallet dimensions: 40 × 40 cm • Film roll height: 500 mm • Maximum film roll diameter: 275 mm • Film core diameter: 76 mm • Maximum film roll weight: 20 kg • Maximum film thickness: 35 microns

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NM-FF2026, Equipment: CE marking, Frozen fish weighing dispenser integrated into the fish feeding, sorting, 10 kg weighing and packaging line. Designed for installation in the customer's premises, taking into account the dimensions and ceiling height. Multi-head dosing device MBP 14C2 EW 60. Number of heads: 14 pcs. Weighing type: weight sensors. Weighing accuracy: 0.1 – 1.5 gr. Pocket volume: 5 liters. Dosing in one cycle: max. 4000 gr. Pocket opening type: from two sides. Nominal speed: up to 180 cycles/min. Pocket drive: stepper motors. Air dehumidifier: above 0 degrees. Electricity AC 240V, 50 Hz, Consumption 1.0 kW; Equipment weight: 800 kg. Machine dimensions: 2600 x 2600 x 1450 mm (for clarification) Control: 12.1 ” touch-sensitive display. Number of programs: up to 99. Room temperature range: from 0 C to + 40 C; External vibration compensation: 4 built-in load sensors for external vibration compensation. Protection class: IP 66, condensation-resistant, completely washable Automatic zeroing: Yes. Self-diagnostics: Yes. Remote diagnostics: Yes. RCU cable. Conformity: CE. -Flow Pack type packaging machine PFM Zenith EW Servo. Equipment for forming pre-cut packages from a film roll. Packaging data: −Package width 100 - 320 mm. −Package length 80 - 400 mm. −Max. package volume 6 liters. −Max. roll width 700 mm. −Film roll diameter max. 350 mm. Mechanical speed: up to 90 cycles per minute. The actual speed will be specified after tests with real product and packaging material. THE BASIC SET OF THE MACHINE INCLUDES: The machine frame, electrical cabinet, melting jaws, vertical melter support made of stainless steel. Roll holder with centering cones. One forming tube made of stainless steel for pillow-type packaging (diameter optional). Photo sensor for printed film and encoder for determining the length of the package. Vacuum belts for film feeding. Machine version with a slope for product and packaging safety. Product holding mechanism before jaws. Packaging support. Vertical seam sealing bar with pneumatic drive. Machine functions are controlled via PLC Siemens. Photo sensor for working with printed film. Possibility to save up to 99 different programs. Machine control via touch sensitive panel 12.2". Machine self-diagnosis. Notes: The machine is designed to work with hot jaws MACHINE DIMENSIONS (base model): Height: 1600 mm. Width: 1280 mm. Depth: 2200 mm. Weight 550Kg. Air consumption: 350 NL/minute. Electricity consumption: 4 Kw. Psdpfjv Dit Nsx Abhjpu Connection: 400 V. 3 Ph. - 50 Hz. 2. Multifunctional line, in accordance with the requirements and premises of the customer. Designed for feeding fish from IFQ, sorting, accumulating in containers, as needed, weighing 10 kg, forming cardboard boxes and feeding tilted boxes to sealing and pallets. The line consists of: - c) Feed conveyor to weighing 10 kg - d) Reversible conveyor for feeding filled boxes to sealing - e) Reversible conveyor with control from scales with two weighing places - f) Roller, gravity, conveyor for feeding empty boxes to 10 kg weighing places - g) Roller conveyor for feeding empty boxes to the 1kg packing table - h) Work table for packing 1kg packages into boxes - i) Rotary table for accumulating 1kg packages - j) Product feed conveyor to the MFG - k) Conveyor for feeding products from the MFG to the packer - l) Conveyor for feeding 1kg packages to the Rotary table - m) carton former, automatic - n) carton sealer -p) Xray

Condition: like new (used), Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: JSUP-1703, PAPER STRAW PRODUCTION LINES FOR BEVERAGE CARTONS (U-SHAPE & I-SHAPE) Location: Poland (European Union) Manufacturer: Zhejiang Jinshen Machinery Manufacture Co., Ltd. Year of Manufacture: 2023 Condition: Excellent – Installed, commissioned, tested and fully operational Availability: Immediate Complete Turnkey Production Solution for Beverage Carton Paper Straws Unique opportunity to acquire two nearly new production lines for paper straws used in aseptic beverage cartons (milk, juice and beverage packaging). The equipment was professionally installed and successfully commissioned in Poland. All machines are fully functional and available for immediate inspection. Line 1 – U-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Flexible straw forming machine JSFP-2021-30 U-shape automatic packing machine JSUP-1703 Microwave dryer 2 × circulation heaters Carton filling machine Conveyor assembly line Vision inspection system Capacity: up to 600–800 pcs/min Suitable for beverage carton applications requiring individually packed U-shaped paper straws. Line 2 – I-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Microwave dryer Vision inspection system I-shape straw packing machine 2 × carton filling machines Capacity: up to 800–900 pcs/min Designed for straight paper straws used in beverage carton packaging systems. Advantages ✅ Machines located in the European Union ✅ No waiting time for production in China ✅ No import duties or overseas shipping delays ✅ Installed and successfully tested ✅ Immediate availability ✅ Modern Delta PLC control systems ✅ Vision inspection systems included ✅ Suitable for food-grade production Technical Highlights Straw diameter: 3.0 – 8.0 mm Production speed: up to 100 m/min Podpfx Abezb Uwlohspu PLC control: Delta HMI touch screens Ethernet communication Automatic counting and monitoring Food-grade manufacturing standard Remote maintenance capability Ideal For Paper straw manufacturers Beverage packaging suppliers Dairy packaging producers Contract packaging companies Investors entering sustainable packaging markets Sale Options Complete package (both lines) U-shape line separately I-shape line separately Inspection The equipment can be inspected under power at our facility in Poland. Additional photos, videos, technical documentation and machine specifications are available upon request. Contact METALTON Sp. z o.o. Poland For detailed information, pricing and viewing appointments, please contact us directly. Keywords: Paper Straw Machine, U Shape Straw Machine, I Shape Straw Machine, Tetra Pak Straw Production Line, Beverage Carton Straw Line, Paper Straw Packaging Machine, Sustainable Packaging Equipment, Straw Manufacturing Line, Beverage Packaging Machinery.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Cameras for Premier Tech – suitable for high-speed compression balers. Used very little, practically new. Can be used for bags measuring 465x365x1320 mm. Ppodpfxozckp Ho Abhju

Condition: used, Year of construction: 2011, We are offering this used Pacepacker Services Blu‑Robot Manipulator (Model 2.8/120) for sale. The robotic arm is in well-maintained condition and comes from industrial use. Ideal for applications such as material handling, packaging, palletizing, or automation processes. Ppedjy Rr Dvopfx Abhou Technical specifications (according to nameplate): Manufacturer: Pacepacker Services Ltd., England Model: Blu‑Robot Manipulator (2.8/120) Serial number: M11‑0239 Year of manufacture: 2011 Condition: Used, fully functional If you have any questions or require further information, please feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Ppodpozbxvljfx Abhju Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), functionality: fully functional, total length: 5,200 mm, total height: 1,700 mm, total width: 1,350 mm, overall weight: 950 kg, I am offering for sale a General System Pack packaging machine in excellent condition. The machine was originally purchased for a project that was later discontinued. During its operation, we were completely satisfied with its performance. It worked reliably, without any technical issues, and was always properly maintained and operated according to the manufacturer's recommendations. Ppodozcyv Ajpfx Abheu The machine is currently out of operation. The price of a new machine of this type is €70,000–80,000. The machine is suitable for packaging a wide variety of products and supports packaging in a modified atmosphere (MAP) to help extend product shelf life. It is suitable both for facilities focused on packaging one or several specific products and for operations with a wide range of packaged products requiring extended shelf life. Compatible packaging materials include: BOPP films Perforated and laminated films Films with paper or aluminum layers PE films (with PE sealing) The machine is available for inspection upon request. Additional information can be provided to serious buyers. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor.  Type of Machine: Butter Packaging Machine Capacity: ± 600 Kg/h Butter Brick Dimensions: 125mm length x 55mm width x 40 mm height Weight: 250 grams Machine Weight: 840 kg Packaging type: Aluminium and Parchment Paper Pedpfx Abjzhlmijhepu Motor power: 1,5 kW

Condition: used, Technical details: table height: 800 mm table rotating: 360 ° table: 800 mm height over floor: 940 mm temperature: max. 450 °C electrics - voltage/frequency: 220/50 V/Hz total power requirement: 1,1 kW space requirements of the machine approx.: T:0,8xB:1,0xH:1,6 m Psdpfx Abou Nu E Sjhopu With this machine can be packed parts respectively shrink-wrapped. There is a table with 4 stations on the machine. Can be purchased together with vaccum welding machine. i.D. *

Condition: good (used), Year of construction: 2009, Manufacturer: Audion Elektro Type: AVP 600-2 Year of construction: 2009 Power 0.7kW AUDION Veggiepack is a unique semi-automatic packaging machine for round vegetables, such as lettuce, cabbage, broccoli, cauliflower etc. The product is dense polypropylene or they are wrapped in styrofoam so that no unnecessary foil is left around the product. The product is protected from damage and the round packaging underlines its appearance. Product features: Sealed at the bottom of the product Empty foil and product separately Film positioning with photocell sensor Fast warm-up time No air compressor required Adjustable packing density Ppsdpfx Abeht Hkkshou AVP 600 specifications The size of the machine (HxWxH): 1230x830x960mm Machine weight: 220 kg Sealing bar: heat seal Film: (perforated) CPP, OPP, polystyrene Foil thickness: approx. 15 microns Foil width: 520-600 mm Product Length: Up to 220mm Product Height: Up to 175mm Production capacity: Max. 550 / hour Voltage: 230V / 1ph / 50Hz Power consumption: 700 watts

Condition: new, Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Ppsdpfxsh Euqle Abhju Mr. Simon Blank Included in the scope of delivery: 1x workbench frame, new Material color: anthracite Overall width: approx. 1,400 mm Overall height: approx. 900 mm Overall depth: approx. 600 mm 1x worktop, new Overall width: approx. 1,400 mm Overall depth: approx. 600 mm Notes: - The workbenches are delivered disassembled. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope. Our services at a glance: (Prices on request) Assembly and installation Please note our general assembly conditions. Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems. Delivery with our own fleet (without unloading)

Condition: new, Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Pedev Tlilepfx Abhepu Height: variable Included in delivery: 1x Workbench frame, new Material color: gray Workbench frame legs: height adjustable 1x Worktop, new Material: Multiplex Material thickness: 38 mm Total width: 1,725 mm Total depth: 750 mm Possible delivery time: 10-12 weeks Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Psdpfxoth N Shs Abhspu Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 3,180 x 700 mm / 2 levels / (184.00€ incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (186.00€ incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (188.00€ incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (190.00€ incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (192.00€ incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (194.00€ incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (198.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Basic dimensions: Width: approx. 2,500 mm Height: approx. 938 mm Depth: approx. 900 mm Technical data for the workbench: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x workbench stand, used Material color: anthracite Stand height: 900 mm Stand depth: 900 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( screwed framework ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm clear width: 2,300 mm 08x Locking pin, second-hand Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,500 mm Depth chipboard: 900 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,280 mm Depth chipboard: 900 mm Surface: possibly coated (two-piece if required) 06x drilling screw, new Finish: galvanized Dimensions: 6.3 x 70 mm 04x Z-bracket, used for locking / inserting chipboard galvanized surface Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 2,500 x 600 mm / 2 levels / (221.00€ net) Workbench 2,500 x 700 mm / 2 levels / (229.00€ net) Workbench 2.500 x 800 mm / 2 levels / (238,00€ net) Workbench 2,500 x 1,000 mm / 2 levels / (254.00€ net) Workbench 2,500 x 1,050 mm / 2 levels / (259.00€ net) Ppsdpjtgkwmefx Abhju Workbench 2,500 x 1,100 mm / 2 levels / (263.00€ net) Workbench 2,500 x 1,200 mm / 2 levels / (271.00€ net) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Dimensions of the workbench: approx. 2,940 x 800 x 985 mm (W x D x H) Dimensions of the shelving unit: approx. 1,730 x 320 x 985 mm (W x D x H) The scope of delivery includes: 03 x Shelving upright S-1, completely galvanized Overall height: 1,972 mm Depth up to a height of 985 mm: 800 mm Depth above a height of 985 mm: 320 mm 02 x Shelving upright S-1, completely galvanized Overall height: 985 mm Depth: 800 mm 10 x Plastic cover caps 10 x Steel feet 33 x Shelf crossbars, S - 2, 1,650 mm clear width 10 x Shelf crossbars, S - 1, 600 mm clear width 28 x Shelf inserts, H 25, 300 x 800 mm 04 x Shelf inserts, H 25, 150 x 800 mm 06 x Shelf inserts, H 12, 600 x 320 mm 03 x Shelf inserts, H 12, 450 x 320 mm 14 x Storage bins, new, approx. 350 x 210 x 150 mm, blue Ppjdehy Nl Iepfx Abhou 15 x Storage bins, new, approx. 500 x 315 x 200 mm, blue Note: The waste bin is not included in the offer! Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply. Shelf inspection Shelving inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet of vehicles (without unloading)

Condition: used, Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data for the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 3,200 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,980 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 06x drilling screw, new Finish: galvanized Dimensions: 6.3 x 70 mm 08x Z-bracket, used for locking / inserting chipboard Surface galvanized Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 3,200 x 700 mm / 2 levels / (271.00€ incl. 19% VAT) Workbench 3.200 x 800 mm / 2 levels / (282,00€ incl. 19% VAT) Workbench 3.200 x 900 mm / 2 levels / (293,00€ incl. 19% VAT) Workbench 3,200 x 1,000 mm / 2 levels / (304.00€ incl. 19% VAT) Workbench 3,200 x 1,050 mm / 2 levels / (309.00€ incl. 19% VAT) Workbench 3.200 x 1.100 mm / 2 levels / (315,00€ incl. 19% VAT) Workbench 3,200 x 1,200 mm / 2 levels / (325.00€ incl. 19% VAT) Ppedpethfddjfx Abhju Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 3,180 x 700 mm / 2 levels / (184.00€ incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (186.00€ incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (188.00€ incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (190.00€ incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (192.00€ incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (194.00€ incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (198.00€ incl. 19% VAT) Ppjdpfx Absthi Huehou Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Basic dimensions: Width: approx. 2,470 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x workbench stand, used Material color: anthracite Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( screwed framework ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm clear width: 2,300 mm 08x Locking pin, second-hand Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. Ppodpfxjth N Sls Abhju - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 2,470 x 700 mm / 2 levels / (166.00€ incl. 19% VAT) Workbench frame 2,470 x 800 mm / 2 levels / (168.00€ incl. 19% VAT) Workbench frame 2,470 x 900 mm / 2 levels / (170.00€ incl. 19% VAT) Workbench frame 2,470 x 1,000 mm / 2 levels / (172.00€ incl. 19% VAT) Workbench frame 2,470 x 1,050 mm / 2 levels / (174.00€ incl. 19% VAT) Workbench frame 2,470 x 1,100 mm / 2 levels / (176.00€ incl. 19% VAT) Workbench frame 2,470 x 1,200 mm / 2 levels / (178.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank The scope of delivery includes: 1x workbench frame, new Material color: anthracite Overall width: approx. 1,750 mm Overall height: approx. 865 mm Overall depth: approx. 600 mm 1x worktop, new Overall width: approx. 1,750 mm Material thickness: approx. 35 mm Overall depth: approx. 600 mm Ppsdpeh Euk Ujfx Abheu Notes: - The workbenches are delivered unassembled. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Please note our general assembly conditions. Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems. Delivery with our own fleet (without unloading)

Condition: good (used), Note: The images are for illustrative purposes only. - The workbench frames are commissioned unassembled; - Production time is typically approximately 3-5 business days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Included in delivery: 4x square tubes, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole pitch: 75 x 50 mm Drill hole diameter: 13 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 1x chipboard, used Thickness Chipboard: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: coated if necessary (two-part if necessary) 6x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 Pedpfxjwgicbs Abhopu 16x washers: M12 Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: new, Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Height: adjustable from 750 - 1,250 mm Scope of delivery includes: 01x Workbench frame, new Frame color: grey Bench leg adjustment: 700-1,250 mm adjustable 01x Drawer cabinet, new Cabinet color: grey Door color: blue Lockable: yes Number of drawers: 3 pcs Drawer height: 115 mm 01x Worktop, new Material: multiplex Ppodpfx Absv Tm Icehju Material thickness: 38 mm Total width: 1,725 mm Total depth: 750 mm Possible delivery time: 10-12 weeks Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for pick-up. Any additional transport or shipping of this item is subject to extra charges, which can be quoted separately by us depending on the delivery location and delivery scope.

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Podpfoqzky Esx Abhjpu Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: used, functionality: fully functional, Packing machine for tuna and other fish. - Great convenience for the placement of fish. - Empty cans are fed from the air and full cans are discharged from a single lane. - Centralized fattening system - Herfraga’ cutting quality: unbeatable packaging presentation. The most versatile. Cans be packed: - Round up to 100 to 150 mm diameter. - Oval (OL-240). - Rectangular (RR-725). Podpfxewn Dqij Abhjpu - Maximum height: 120mm TECHNICAL CHARACTERISTICS: Production: up to 50 cans/minute maximum. (depending on the type of format) Diameters to be packed: 100-150 mm. Height of cans: max. 120mm. Shape of cans: round, oval or rectangular.

Year of construction: 2006, condition: excellent (used), Manual packaging machine. Ppsdpfxsiz S Ifs Abhsu

Year of construction: 2015, condition: good (used), Smurfit Kappa Case Packing Machine Previously being used for glass bottles, in various sizes and configurations. Pjdszg Hd Hepfx Abhjpu *Videos available on request*