Used Streamfeeder Reliant 1500 for sale (4,385)

Condition: new, functionality: fully functional, turning diameter over cross slide: 438 mm, spindle bore: 85 mm, turning diameter over bed slide: 660 mm, center height: 330 mm, turning length: 1,500 mm, quill stroke: 165 mm, quill diameter: 85 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, bed width: 400 mm, quill mount: MK 5, Equipment: rotational speed infinitely variable, Tip height: 330 mm Center distance: 1500 mm Spindle bore: 85 mm Spindle nose according to DIN 55029: Camlock D8 Gear stages: 12 Spindle speed range: 15-1500 rpm Drive power: 11 kW Weight approx. 2135 kg Ffsdpjm E Umiofx Afpsu Features and more: Each gear stage is infinitely variable from 50% to 100% Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,500 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,670 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 2,135 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Center height: 260 mm Center distance: 1500 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Fjdjctutmspfx Afpjfu Weight approx. 2135 kg Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 65 mm, turning diameter: 500 mm, center height: 250 mm, turning length: 1,500 mm, feed length X-axis: 380 mm, feed length Z-axis: 1,500 mm, rotational speed (max.): 1,600 rpm, Centre height over bed: 250 mm Swing over bed: 500 mm Swing over gap: 700 mm Swing over cross slide: 310 mm Fedpfeyguiljx Afpsfu Bed width: 380 mm Usable gap width: 360 mm Minimum / maximum speed: 28–1600 rpm Spindle nose type: CAMLOCK 6" Spindle bore: 65 mm Tailstock quill diameter: 70 mm Tailstock quill travel: 220 mm Tailstock quill length: 370 mm Tailstock taper: Morse No. 5 Cross slide travel: 380 mm Tool slide travel: 180 mm Travelling steady rest (max turning Ø): 220 mm Fixed steady rest (max turning Ø): 220 mm Main motor power: 10 kW Number of standard threads: 254 Longitudinal feeds min/max: 0.085–1.08 mm Cross feeds min/max: 0.042–0.54 mm Carriage bearing length on bed: 600 mm Cross slide length: 600 mm Cross slide width: 230 mm Net weight: 2.600 kg Machine complete with: - Type C tool post - Fixed steady rest - Travelling steady rest

Condition: new, pressure 200 t stroke 400 mm daylight longitudinal/sideways 1490 /400 mm Ffedpfx Afoygxz Eepsu dayligth 900 mm liter capacity 22 l Motor output 7,5 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,67 x 1,0 x 2,5 m Presses can be operated both by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee

Year of construction: 2024, condition: refurbished (used), functionality: fully functional, Grinder for shafts and bores after complete overhaul and reconstruction. Ffedjfhk Iuepfx Afpeu

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, workpiece weight (max.): 1,500 kg, total height: 24,920 mm, total length: 43,670 mm, total width: 30,700 mm, table width: 700 mm, table length: 1,600 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 8,000 rpm, spindle motor power: 11 W, spindle nose: Iso 40, tool length: 250 mm, tool diameter: 75 mm, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Fedorkn Iispfx Afpefu Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 500 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: excellent (used), Year of construction: 2004, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, Axes: X = 2500 mm, Y = 1100 mm, Z = 1500 mm. Fully functional, from ongoing production. Two units available. Price: 6,500 EUR per unit. Fjdpfxeyc E Evs Afpofu

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, laser wavelength: 1,064 nm, table length: 1,500 mm, table width: 3,000 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 8,500 kg, warranty duration: 24 months, space requirement height: 2,400 mm, space requirement length: 8,550 mm, working range: 1,500 mm, Equipment: cooling unit, safety light barrier, XL class = processing area X 1550 mm x Y 3050 mm x Z 150 mm High-precision linear axis system with 6 - 12 KW laser power Double change table system, laser processing at one working height! (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Maximum dimensions (L × W × H (with table 8504) × 2310 × 2400 mm / laser machine 6.5 T + external loading table 2T = 8.5 tons Power supply depends on the laser source (6kW) 400V/50Hz 3 phases / 27kW Fedpfx Ajr D Nfkefpefu Process gas control for: oxygen / nitrogen / compressed air depending on the material and process Simple and highly precise laser processing - laser cutting at high speed and quality

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 3,050 mm, table width: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, skyCUBE XL class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XL class, manufactured by PFEIFER technology in Saxony, Germany, has been designed for your professional cutting applications. It combines a new level of productivity with cost-effectiveness and precision. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, offering you the highest level of safety. The ergonomic design with a pull-out worktable makes machine loading easier. Drawers in the lower section of the machine collect cutting waste. Optimize quality and cutting speed even with thick materials thanks to 6kW laser power—even when cutting with compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Naturally, you’re always on the safe side when operating the skyCUBE laser! Ffjdpfxot A N A Rs Afpsu The skyTUBE Pro is a Class 1 laser system. There is no risk of exposure to laser beam emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass and a perfectly shielded cutting area reliably protect you from the hazards of laser radiation, while an independent safety system allows loading without interrupting production. Select the laser power best suited to your needs; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a brand-new laser machine manufactured by us) Maximum dimensions (L×W×H): 2310×8505×2505 mm / Laser machine 4.0 T Power supply depending on laser source (6kW) 400V/50Hz 3 phase / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on material and process Laser processing made easy and highly precise – high-speed, high-quality laser cutting

Condition: used, Year of construction: 1965, Dimensions (L/W/H) 10460,0 × 5715,0 × 5537 mm spindle head adjustment horizontal 3160 mm spindle head adjustment vertikal 1000 mm hobbing length 2250 mm Ffsdpouh E Tbefx Afpju weight of the machine ca. ca. 76660 kg t

Condition: used, Year of construction: 1960, grinding diameter ca. 360 mm grinding length 1500 mm serial number 12013 Fsdpfx Aow Sya Tsfpsfu

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you the following: Manufacturer: DMG Mori Model: NTX 2000/1500 2nd Gen Year of manufacture: 2020 Control: Celos Fanuc F31iB5, Mapps 4 Technical Data: Maximum turning diameter: 670 mm Turning length: 1,538 mm Bar capacity: max. 65 mm Travel axes: X1 axis: 675 mm Y axis: ±150 mm Z1 axis: 1,562 + 164 mm B axis: ±120° A axis: 1,542 mm X2 axis: 200 mm Y2 axis: ±40 mm Z2 axis: 1,542 mm Main spindle: Maximum spindle speed: 5,000 rpm Drive power: 15/15/11 kW Torque: 421/302/256 Nm Spindle nose: JIS A2-6 Spindle bore: Ø 73 mm Counter spindle: Maximum spindle speed: 5,000 rpm Drive power: 15/15/11 kW Torque: 421/302/256 Nm Spindle nose: JIS A2-6 Spindle bore: Ø 73 mm Milling spindle: Speed range: 0–12,000 rpm Drive power: 28/23 kW Tool holder: Capto C6 Number of tool positions: 76 Max. tool diameter: Ø 70/Ø 130 mm Fodpeyfl N Tofx Afpefu Max. tool length: 400 mm Max. tool weight: 8 kg Turret: No. of tool holders: 12 Speed of driven tools: 12,000 rpm Square tool shank length: 20 mm Boring bar shank diameter: Ø 32 mm Drive power: 5.5/5.5/3.7 kW Torque: 16.9/13.1/8 Nm Rapid traverse: X axis: 50 m/min Y axis: 40 m/min Z axis: 50 m/min A axis: 36 m/min X2 axis: 25 m/min Y2 axis: 18 m/min Z2 axis: 40 m/min B axis: 100 rpm Through-bore clamping device: Ø 67 mm Operating hours: approx. 15,050 h Spindle hours: approx. 4,210 h Technical features and accessories: - Kitagawa 8-inch through-bore chuck BB208A621 Ø 210 mm on main and counter spindle - Dual foot switch for spindle 1 and spindle 2 - Chuck cylinder stroke monitoring (linear position monitoring) for spindle 1 and spindle 2 - Full indexing of the tool spindle - Turret tailstock function - Suitable coolant: water-soluble coolant - Chip conveyor - Hydrajet MS30-1000/70 bar coolant system - Coolant chiller - Air blast device for chuck (spindle 2) - Interface for mist extractor - Manual tool presetting device installed on the machine (removable, spindle 1 and spindle 2) - Fully closed control loops for X, Y, and Z axes (tool spindle) - In-machine workpiece measuring system, Renishaw RMP600 - 4-color signal tower - Multi-dry filter - Voltage: 380 V, Frequency: 50 Hz - Alternating spindle speed - Prepared for 3D quickSET - Open pocket and island milling - High-speed fixed cycle - X-axis direction, JIS/ISO-compliant - 3D machine model - Transformer Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change and errors. Prior sale reserved!

Condition: good (used), Year of construction: 1980, 4-jaw chuck Length: 1500 mm Width: 500 mm Height: 1500 mm Weight: 900 kg Ffedpfx Afswry Ixjpeu

Condition: new, Year of construction: 2025, pressing force: 1,500 t, table width: 1,500 mm, table length: 2,400 mm, retraction force: 500 t, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 1500/500 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered for maximum frame rigidity, precise parallelism, and long-lasting operation in high-tonnage deep drawing applications requiring large bolster dimensions. Thanks to the 8-guide H-frame body, the ram and table movements remain controlled and stable throughout the pressing process. The CHSP 1500/500 model, with 1500-ton main ram and 500-ton blank holder capacity, is developed for large-dimension dies, deep drawing, and precise forming operations. The vibration stress-relieved welded steel frame delivers high durability and reliability under heavy-duty industrial conditions. ⚙️ Standard Equipment • Welded steel construction, 8-guide H-frame design • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronic contamination warning for the filter • Monitoring of hydraulic oil temperature and system status via display • Off-line filtering and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-guide H-frame design Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Fedpfx Afjx N Ukijpjfu Capacity (Ram / Blank Holder): 1500 / 500 tons Moving / Fixed Table: 1500 × 2400 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Blank Holder Cylinder: Ø360 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,500 t, table width: 1,500 mm, table length: 2,400 mm, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8 Guides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are engineered for deep drawing, forming, and heavy-duty shaping applications that require high tonnage. The 8-guide H-frame structure delivers maximum rigidity and stability during pressing operations, ensuring parallelism and perpendicularity tolerances are maintained. The CHP 1500 model, equipped with a large bolster, robust hydraulic system, and high stroke capacity, provides a reliable solution for sectors such as automotive, defense, heavy metal forming, and industrial production lines. The frame is stress-relieved by vibration, guaranteeing long-lasting and stable operation. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame press structure • Vibration stress-relieved main frame • Bronze Zr14 slide bearings • WPQR and WPS welding applications approved by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • Touch screen panel (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Operator safety protection systems • SIEMENS/SCHNEIDER electrical components 📐 Technical Specifications – CHP 1500 Type: Steel construction, 8-guide H-frame press Frame Material: St52 – ERDEMIR Slide Bearings: Bronze Zr14 Capacity (Ram): 1500 Ton Moving Bolster Size: 1500 × 2400 mm Fixed Bolster Size: 1500 × 2400 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration stress-relief Welding: WPQR and WPS certified by TURK-AK, EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø620 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approximate Height: 6250 mm Ffjdpfx Asx N T R Ujfpsu Approximate Width: 3750 mm Approximate Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 70 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: good (used), Code: 0242 Brand: MVM - ITALY Model: T 1500 - CE Standard Professional wood turning lathe with copying device for wood, plaster, composite materials and various - CE Standard Technical data: Single-phase motor 220 Volt - Kw 2,5 Copying device: the copying device is a unit mounted on the rear bench. It can reproduce weather with wooden samples or with metallic templates thanks to its modern view. It is a practical and manageable tool, it permits large time saving, in batch production or mass production, too. The feed is given by a confortable wheel rotation, the wheel is mounted on the machine fore side Fsdpfx Afjxykwkspjfu Distance between centres mm 1500 Height of centre mm 220 Tool support Spindle revolutions 4 speeds Spindle cone n° 2 Counter centre n° 3 Overall dimensions mm 2350 x 650 x 1200 h Weight kg 325

Condition: good (used), functionality: fully functional, Year of construction: 2000, load capacity: 1,500 kg, platform length: 3,300 mm, platform width: 1,450 mm, Well-maintained GEDA construction hoist from first ownership: – Rack and pinion construction hoist GEDA 1500 Z/ZP – Platform type B, 3.30 x 1.45 m – 1 loading door, 1 unloading flap – Suitable for up to 7 persons and loads – Load capacity 1500 kg – Lifting speed 12/30 m/min – Base unit GEDA 1200 ZP Ffjdpfsyfxdkjx Afpou – Cable reel with drag cable approx. 50 m – Safety catch device – Steel masts with rack and pinion available upon request – Mast wall brackets on request – Landing gates on request – Possible accessories, see photos 9-11 – Year of manufacture: 2000, first owner – Good condition, little used – Sale from location Karlsruhe / Southern Germany – Inspection by appointment possible

Year of construction: 2025, condition: new, SPIRAL PIPE MACHINE Metformer MTR1500 is intended for the production of round ducts of the SPIRO type. The produced channel complies with the DIN EN 12237, BS and Eurovent standards. Device for uncoiling a sheet of metal strip with a vertically adjustable brake Forming strips for the production of pipes Fast, burr-free cutting thanks to circular cutting knives Control from the LCD touch screen Essential Automatic Lubrication System Automatic angle control automatic shear during pipe production Remote access and control Reporting system (production quantity daily-weekly-monthly) Automatic error detection, Engine power 10.5 kW (smooth regulation) ELECTRICITY 380V / 3PH 50 / 60HZ AIR PRESSURE 6-8 BAR HYDRAULIC OIL AMOUNT 10L + 6L Ffodpfxep T Smlo Afpsu CALCULATED SHEET THICKNESS (GALVANIZED) 0.5-1.2 CALCULATED SHEET THICKNESS (CHROME) 0.4-0.7 DIAMETER RANGE 100-1250 MM PLATE WIDTH TO USE 137MM PRODUCT SIZE 250MM-3000MM (option 6000MM) MACHINE DIMENSIONS 1600 (W) 2400 (HEIGHT) X3050 (Length) COFFEE TABLE 3Mx 1 pcs. (OPTION 3Mx2 pcs.) MACHINE WEIGHT 1950kg STANDARD DIMENSIONS: Ø125, Ø150, Ø160, Ø180, Ø200, Ø224, Ø250, Ø280, Ø300, Ø315, Ø350, Ø400, Ø450, Ø500, Ø560, Ø600, Ø630, Ø700, Ø710, Ø1125.1000, Ø900 Ø1250

Condition: new, spindle bore: 105 mm, turning diameter: 500 mm, turning diameter over bed slide: 300 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, type of input current: three-phase, overall weight: 2,600 kg, three-jaw chuck diameter: 315 mm, New lathe with large bore. Brand: KMS Type: CS6250C TDC: 1500 mm Turning diameter over bed: Ø 500 mm Turning diameter over slide: Ø 300 mm Turning diameter in pocket: Ø 710 mm Turning length in pocket: 240 mm Bed width: 390 mm Spindle passage: Ø 105 mm Spindle speeds: 12 (36 - 1600 rpm) Tailstock spindle diameter: 75 mm Tailstock range: 150 mm Ffsdpjvxz R Njfx Afpeu Tailstock mounting: MC5 Machine dimensions: ± 3132 x 975 x 1270 mm (L x W x H) Machine weight: ± 2600 kg Machine equipped with: - Longitudinal and cross feed. - Rapid traverse on longitudinal and cross feed. - Adjustable and movable stops for automatic longitudinal feed. - Thread cutting axis (cutting of Metric/Inch/Module/DP thread possible. - Quick-change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, passage 100 mm (Camlock). - 4-jaw chuck Ø 400, passage 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Fixed steady rest Ø 120- Ø 260 mm. - Follow steady rest Ø 20 – Ø80 mm. - Coolant device.

Condition: as good as new (ex-display), The Numturn S 560/1500 is a state-of-the-art CNC Flat Bed Lathe designed for the Lathes category, offering high performance for large workpieces. This machine boasts a robust box-way design that ensures maximum precision while facilitating heavy machining tasks. Its powerful Siemens servo motor drives the main spindle through a 4-step transmission, allowing for infinitely variable spindle speeds and high torque across various speeds. Equipped with an 8-station VDI tool changer, the Numturn S 560/1500 maximizes productivity and flexibility in operations. The user-friendly Siemens 828D control enables quick setup through two electronic hand-wheels, resembling manual lathe operation for enhanced user experience. With a hydraulic tailstock featuring high clamping force and a reliable automatic central lubrication system, maintenance is efficient and straightforward. For those looking to enhance their productivity, the Numturn S 560/1500 represents an excellent solution in CNC Flat Bed Lathes. To learn more about this machine or to request a quote, don’t hesitate to contact us. Ffodpfx Aeuyg Ersfpou

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: AL-X20390, conveyor belt width: 1,500 mm, Air-cooled portable heating press for welding PVC/PU conveyor belts up to a width of 1500 mm. Model GAMMA 1500 by FONMAR. The unit is unused. Ffjdpfx Aeydb Ucefpou

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 990-185, overall weight: 4,500 kg, input current: 80 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 1,000 l, noise level: 83 dB, Equipment: cooling unit, emergency stop, The WEIMA TH1500 briquetting press compacts all materials suitable for pressing within a single die. The resulting briquette is dimensionally stable and alternately ejected, ensuring smooth and continuous operation. The axial piston hydraulic pump, powered by a 30 kW motor, produces up to 7 briquette cubes per minute. Fodpfx Asxtm Ilofpofu A distinctive feature of this model is the precision die where the pressing process takes place. The movement sequences of the cylinders and the die are monitored and controlled by a displacement measurement system, ensuring high accuracy, repeatability, and consistent briquette quality. Technical Data: Hydraulic system motor power: 30 kW Operating voltage: 400 V / 50 Hz Nominal current: 80 A Protection fuse: 125 A Current drawn by hydraulic system: 55 A Machine weight: 4500 kg Oil tank capacity: 1000 l Output: approx. 7 briquette cubes/min Other available machines: Serial no. 990-184 – Year 2014

Condition: new, Year of construction: 2025, total width: 20,800 mm, overall weight: 600 kg, input voltage: 400 V, type of input current: DC, input frequency: 50 Hz, pressure: 5 bar, compressed air connection: 6 bar, electrical fuse: 32 A, power: 0.004 kW (0.01 HP), maximum load weight: 350 kg, cage diameter: 1,500 mm, - New machine made entirely of stainless steel including wash pump - Automatic basket drive - Push-button to rotate the basket outside of the cleaning procedure - Tank cover and mesh filter under the basket made of stainless steel - Dry-running protection - Door safety switch - Connections for plate phase separator (oil separator) - Internal basket width: 1500 mm - Usable height from basket bottom to nozzle rack lower edge: 750 mm - Flat jet nozzles Ffodpfxjqpdlze Afpeu - Wash pressure: 4.5 bar - Return bend used as condenser for low water consumption - Includes 20 kg LCT Power Star 50-730 - Delivery time upon request

Condition: used, • Manufacturer: MHG Strahlanlagen GmbH • Max. glass thickness: 70 mm • Max. glass size: height 1500 mm, length 3,000 mm • Open top • Dimensions: L 6200 x W 2500 x H 3000 mm • Total height: 2300 mm Ffodpfx Afexu Au Dspsu • Number of nozzles: 2 + 1 manual hand gun • Complete documentation available • Blasting speed steplessly adjustable: 100 – 500 mm/s • Blasting nozzle diameter: 6.5 mm • Air consumption at 6 bar (L/min): 1200 litres with 2 nozzles • Connection values: 230/400 V/50 Hz/3x16 A

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. Fodpfx Afou Nzwuepofu The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *