Used Submersible Pump Awk 15 Kw 50 L S for sale (1,11,051)

Condition: used, saw blade diameter 315/350 mm capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm Dcedpfx Aboxf I Uwjcen capacity 90 degrees: flat 160x90 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m Unused display machine!!! Includes saw blade and base cabinet • For right and left miter cuts up to 45°, end stop at 90° and at 45° left • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • 2 speeds: 30 + 60 rpm • Automatic cooling directly on the saw blade • Length stop, assembly tool

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical Dcedpfx Absxabkzecon grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Year of construction: 1995, condition: used, machine/vehicle number: 30-S/70, circulation-Ø: ueber Bett 625 mm max. center distance: 1500 mm spindle boring: 105 mm spindle speed: 6,6 - 2000 rpm Djdpfx As Nzhdebcocn space needed: 4400 x 2050 x 1820 mm weight: 5200 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 3,600 h, functionality: fully functional, outer dimension length: 7,500 mm, A very well-functioning laser cutting system from GLORYSTAR – 1500 x 3000 mm with shuttle table, equipped with an IPG 3.0 kW laser, was used by us for the production of personalized metal signs – mostly in the 2.0 mm range, but it can of course cut thicker materials as well. The machine is still in daily use and can, of course, be demonstrated under power in operation. Included with the laser and in the price are an air dryer and air reservoir. A Glorystar technician is available for modifications if required. Djdpfx Abowzr Szjcocn

Condition: used, Year of construction: 2023, operating hours: 43 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: ALMIG HLA-06-150 (10 bar) with 150 liter compressed air tank The compressor has 43 operating hour and is available immediately. 3 cylinders Pressure: 10 bar Rated power: 4.0 kW Delivery quantity at 7 bar: 450 l / min Compressed air outlet: 1/2 " Dimensions length x width x height: 1357 x 507 x 1070 mm Dedexc Hzkopfx Abcscn Weight: 169 kg Visit our store. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: good (used), power: 220 kW (299.12 HP), fuel type: diesel, color: yellow, Year of construction: 2016, operating hours: 9,120 h, Equipment: air conditioning, Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Empty weight: 26.100 kg Djdsw Un S Aspfx Abcocn Functional Bucket capacity: 5 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: VCEL150HH00005075 Other information Tyre brand: Triangle Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,1x3,2x3,9 Production country: SE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: new, saw blade diameter 315/350 mm capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 160x90 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m The large workshop saw with sophisticated technology. (20070) • For miter cuts right and left up to 45°, end stop at 90° and at 45° left • For sawing steel, stainless steel, and, to a limited extent, aluminum profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Conical safety clutch made of hardened steel to protect the saw blades. • Large base plate made of solid cast iron for maximum stability and low-vibration sawing • 2 speeds: 30 + 60 rpm Dsdpfx Aed Iin Tebcscn • Powerful special gear with elastic clutch for heavy-duty use • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in the handle with restart lock • Length stop, assembly tool ATTENTION: Price does not include saw blade!!!

Condition: new, width of the strips 150 mm Dcedjxabf Eopfx Abcsn band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: good (used), Year of construction: 2021, General information Field of application: Construction Serial number: 200012083 Weights Empty weight: 7.200 kg Functional Bucket capacity: 4 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Dcsdpfx Abew Uk Sxjcon Other information Fits to following machines: Volvo L150H Bucket type: Loader bucket Delivery terms: EXW Production country: AT Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 150 h, load capacity: 500 kg, lifting height: 3,250 mm, fuel type: electric, mast type: standard, construction height: 2,137 mm, fork length: 1,200 mm, total length: 1,600 mm, drive type: Elektro, construction width: 1,300 mm, net weight: 1,750 kg, High-lift pallet truck Dsdpfow Sbfqjx Abcocn Load center: 600 Mast type: Standard Technical condition: Good Battery voltage: 26V Battery capacity: 210Ah Battery year: 2020 Description: Cantilevered pedestrian stacker with 360° rotatable bale clamp, arms 300 x 1,000 mm, opening range 790 to 1,630 mm Rotating device, 3rd valve, 4th valve, pulse control, CE certificate,

Condition: good (used), Year of construction: 2003, Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Dcsdpfxjwkg Txs Abcsn Hours - 79.000

Condition: used, mileage: 54,780 km, power: 81 kW (110.13 HP), first registration: 06/1993, fuel type: diesel, color: blue, Equipment: tail-lift, * Our internal no.: 1127 * MB Unimog 417/20 * First registered: France - Utility company, in Germany since 2021 and inspected by MB. * Tail lift * Winch - Manufacturer: Werner u. Co. Maschinenfabrik GmbH Seilwindenbau * Very good tires * Battery replaced new at MB, 05/2025 * Year of manufacture: 1992 - First registration: 06/1993 * NEW trailer couplings (2 pieces) included loose. * Driver's door trim included loose, as well as a cover for the cockpit. * etc. * Chassis: clean * Engine: clean / dry Dedpfxswvd D Ee Abcscn * Very good overall condition * All information without guarantee * Subject to prior sale * Please refer to our General Terms and Conditions

Condition: used, fuel type: diesel, Year of construction: 2017, operating hours: 1,002 h, Compact dumper – total weight 2,836 kg – engine 19.20 kW – 1,002 hours = More information = Year of manufacture: 2017 Model year: 2017 Drive: Wheeled Unladen weight: 2,836 kg For more information, please contact Miguel Cubas. Djdpexcygaofx Abcscn = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Year of construction: 2025, condition: new, Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of chain bags (flat pouches) with regular or irregular shape, optional with hanging hole, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are continues filled per machine cycle, whereby a higher output will be achieved per minute. For the production process 2 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-180)xW(50-90)mm; filling capacity max. 100ml; max. speed of the machine in neutral: 150 cycles/minute; 4.5kW; 12m³/h; machine dimensions: (L)3500x(W)970x(H)1500mm; weight: 1400kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and/or other modules (such as conveyor etc.) shown on the picture are optional modules to this position and only depicted for demonstration purposes. The machine is suitable for variety of composite films. We gladly verify and confirm on basis of sampling the compatibility of the respective composite film. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Dcodpsv Nlutjfx Abcon Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Year of construction: 2001, Laser marking system Djdjq Abnnjpfx Abcecn Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: good (used), Gear motor, electric motor -Motor comes from: Gansow scrubber dryer -Connection: 24 volts -Speed: 160 rpm -Power: 1 kW -Shaft diameter: Ø 25 mm -Number: 8 available -Price: per piece Dcedpfsdv H E Iox Abcsn -Dimensions: 390/140/H160 mm -Weight: 13 kg

Condition: like new (used), Woma 150Z P16 2000 bar at 20 ltr/min at 1800 rpm Djdsd Hny Aspfx Abcjcn

Condition: used, mileage: 54,780 km, power: 81 kW (110.13 HP), first registration: 06/1993, fuel type: diesel, color: blue, Equipment: tail-lift, * Our internal no.: 1127 * MB Unimog 417/20 * First registration: France – Used by an energy supplier, in Germany since 2021 and serviced by MB. * Tail lift (LBW) * Winch – Manufacturer: Werner u. Co. Maschinenfabrik GmbH Seilwindenbau * Very good tyres * Battery replaced by MB in 05/2025 * Year of manufacture: 1992 – First registration 06/1993 * NEW trailer hitches (2 pieces) included separately. * Driver’s door trim included separately, as well as a cover for the dashboard. * etc. * Frame: clean * Engine: clean / dry Dcodpfx Abewu N Elscjn * Very good overall condition * All information provided without guarantee * Subject to prior sale * Please refer to our terms and conditions

Year of construction: 2003, condition: ready for operation (used), Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible. Dcjdpexaph Ujfx Abcen

Year of construction: 2025, condition: new, Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape, hanging hole optional, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-225)xW(65-120)mm; filling capacity: max. 180ml; max. speed of the machine in neutral: 75 cycles/minute (corresponds to max. 150 bags/min); 5.5kW; 13m³/h; machine dimensions: (L)4290x(W)970x(H)1500mm; weight: 1800kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and/or other modules (such as conveyor etc.) shown on the picture are optional modules to this position and only depicted for demonstration purposes. The machine is suitable for variety of composite films. We gladly verify and confirm on basis of sampling the compatibility of the respective composite film. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Dcjdpfx Aov Nlvwobcjn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette Dcedpolzm Eqjfx Abcjn - control cabinet fixed on the back of the machine weight 2500 kg

Condition: excellent (used), Year of construction: 2007, Technical data: Material thickness: 0.5 – 20 mm Max. processing width: 1500 mm Number of units: 3 Infinitely variable feed: 0 – 4 m/min Grinding motor drive power: 4 x 3.0 kW Motor power: 12.6 kW Dimensions (L x W x H): approx. 2730 x 1500 x 1550 mm Weight: approx. 2.3 tons Application areas: Double-sided deburring of flame-cut, punched, laser-cut, autogenously cut parts, as well as waterjet-cut components Djdpjw U Dmisfx Abcecn Condition: Very good condition, due to little use Operating hours: 35,000 Scope of delivery: Machine with LISSMAC extraction system

Year of construction: 2025, condition: new, Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of chain bags (flat pouches) with regular or irregular shape, optional with hanging hole, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-225)xW(65-120)mm; filling capacity: max. 180ml; max. speed of the machine in neutral: 75 cycles/minute (corresponds to max. 150 bags/min); 6.5kW; 13m³/h; machine dimensions: (L)4290x(W)970x(H)1500mm; weight: 1900kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and/or other modules (such as conveyor etc.) shown on the picture are optional modules to this position and only depicted for demonstration purposes. The machine is suitable for variety of composite films. We gladly verify and confirm on basis of sampling the compatibility of the respective composite film. Djdpsv Nlv Dofx Abcscn That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape, hanging hole optional, with zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-225)xW(65-120)mm; filling capacity: max. 180ml; max. speed of the machine in neutral: 75 cycles/minute (corresponds to max. 150 bags/min); 6.5kW; 13m³/h; machine dimensions: (L)4900x(W)970x(H)1500mm; weight: 2000kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and/or other modules (such as conveyor etc.) shown on the picture are optional modules to this position and only depicted for demonstration purposes. The machine is suitable for variety of composite films. We gladly verify and confirm on basis of sampling the compatibility of the respective composite film. Dcedpfev Nlv Rox Abcjn That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape and a spout on top. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-225)xW(65-120)mm; filling capacity: max. 180ml; max. speed of the machine in neutral: 75 cycles/minute (corresponds to max. 150 bags/min); 6.5kW; 18m³/h; machine dimensions: (L)4290x(W)970x(H)1450mm; weight: 2100kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and/or other modules (such as conveyor etc.) shown on the picture are optional modules to this position and only depicted for demonstration purposes. The machine is suitable for variety of composite films. We gladly verify and confirm on basis of sampling the compatibility of the respective composite film. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Dcsdpfxsv Nlwbs Abcjn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.