Used Susemihl Su 260 for sale (3,820)

Condition: good (used), Year of construction: 2008, functionality: fully functional, power: 2 kW (2.72 HP), Sales: SGT Strahlmaschinen AG, Switzerland; Turbine type: 2 x TC 260 D; 2 x 4 kW Hnsdpfx Ajwbhkaeiyol

Condition: used, mileage: 4,44,000 km, power: 260 kW (353.50 HP), first registration: 12/2017, fuel type: diesel, number of seats: 31, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1181 * MB O 530 Citaro C2 * Powerful engine: 260 kW / 354 HP * New paintwork by previous owner in 2026 * First registration: 12/2017 - Model year: 2018 * 1/2/3/D/N/R - Voith gearbox * Retarder * LED destination display: front/side/side/rear Hsdpfjyw Ekisx Aiysnl * Control unit * Manual ramp * Air conditioning * Auxiliary heater * Fog lights * Interior video surveillance * Reversing camera * Driver protection screen * Radio * 31 seats * 68 standing places * Last workshop inspection on record (invoice approx. €3,700): - Renewal of tie rod right & left side - Axle alignment - DPF diesel particulate filter * Rear axle tyres: very good condition - at least 90% tread * Front axle: 30% tread * etc. * Overall condition: clean * The customer is required to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may still be in service / mileage and condition may vary * All information without guarantee * Subject to prior sale * Please refer to our terms and conditions

Condition: used, mileage: 3,71,140 km, power: 309 kW (420.12 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 10,170 kg, maximum load weight: 15,830 kg, overall weight: 26,000 kg, tire size: 315/80 R22,5, fuel: diesel, brakes: intarder, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 9,600 mm, Year of construction: 2012, construction height: 4,000 mm, number of beds: 1, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, Cylinder head gasket defective Hnodpfxjwzzkys Aiysl The used Iveco STRALIS AS 260 S42 Y/FS-CM Eco is a high-performance truck equipped with a 10,308 cc diesel engine producing 309 kW (420 hp). First registered on 03/12/2012, the vehicle has a mileage of 371,140 km. It complies with the Euro 5 emissions standard and features an automatic transmission. With a length of 9,600 mm, a width of 2,550 mm and a height of 4,000 mm, this truck offers a permissible gross vehicle weight of 26,000 kg. The yellow (metallic) vehicle is equipped with a green emissions sticker (class 4) and comes with practical features such as a steering axle, reversing camera, and integrated air conditioning. It offers seating for two persons and has two doors. The truck has previously had one owner and is in used condition. In addition to the technical specifications, the seller offers various flexible sales and service options, including the possibility of viewing and delivery within Germany. Sale exclusively to traders (agriculture, self-employed professionals, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: used, mileage: 8,35,837 km, power: 309 kW (420.12 HP), first registration: 11/2010, fuel type: diesel, empty load weight: 9,580 kg, maximum load weight: 16,420 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: intarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 9,480 mm, Year of construction: 2010, construction height: 3,850 mm, number of beds: 1, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, trailer coupling, The Iveco STRALIS AS 260 S42 Y/FS-CM is a versatile used truck, ideal for commercial use or export. First registered in November 2010 and with a mileage of 835,837 km, this vehicle is powered by a powerful diesel engine that delivers 309 kW (420 hp) and meets Euro 5 emissions standards. Equipped with an automatic transmission and a steerable and liftable axle, the STRALIS offers excellent maneuverability and is flexible in use. The vehicle is presented in a striking yellow metallic paint finish. With an overall height of 3,850 mm, a width of 2,550 mm and a length of 9,480 mm, it is designed for heavy load transport and has a permissible gross vehicle weight of 26,000 kg. The equipment includes two doors and two seats, air conditioning and an INTARDER braking system, which provides additional safety. The truck is approved as a truck and has a green environmental sticker (4), which allows it to be used in environmental zones. With only one previous owner and regular maintenance, the STRALIS is ready for efficient use. Steering and lifting axle Only sold to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale. Hodpfx Ajr Uzgcoiyjnl

Condition: used, mileage: 3,66,769 km, power: 309 kW (420.12 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 9,630 kg, maximum load weight: 16,370 kg, overall weight: 26,000 kg, tire size: 315/80 R22,5, fuel: diesel, brakes: intarder, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 9,500 mm, Year of construction: 2011, construction height: 4,000 mm, number of beds: 1, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, Shifts up to 2nd gear. The used Iveco STRALIS AS 260 S42 is a reliable truck of emission class Euro 5, making it ideal for commercial operators in sectors such as agriculture and export. Equipped with a powerful 309 kW (420 HP) engine and a displacement of 10,308 cc, it offers impressive performance. The truck features an automatic transmission and has a mileage of 366,769 km. Hnodpfxeupac Io Aiyel First registered in October 2011, the vehicle is in good condition and is supported by a green environmental badge. The yellow metallic paintwork gives the vehicle a striking appearance. Useful features such as a steering axle, lift axle, and an INTARDER system provide enhanced handling and safety. In addition, the installed air conditioning ensures driving comfort. This Iveco truck has a total height of 4,000 mm, a width of 2,500 mm, and a length of 9,500 mm, with a permissible gross weight of 26,000 kg. For transport purposes, the vehicle offers cargo options and a trailer hitch mechanism (AHK). Interested buyers can inspect the vehicle without prior appointment from Monday to Friday or on Saturdays. Sale only to commercial operators (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: like new (used), Vacuum machine Hodpexru Tgefx Aiyenl Manufacturer: Supervac Lid with plexiglass window On wheels with brakes Microprocessor control with vacuum sensor Integral vacuum pump with motor protection Reliable and easy to service Easy to clean Simple to operate Chamber dimensions: 800x730x250mm Seal lenght: 4x 660mm

Condition: used, Year of construction: 2017, We offer you: CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Hedpfewtd A Nox Aiysnl Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Technical specifications: Travel distances: - X-axis travel: 2,600 mm - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Main spindle: - Speed range: 20 - 15,000 rpm - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table - Clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Technical features: - ICS (internal coolant supply) 40 bar - Coolant spray gun - Rotating viewing window - Tropical package - Dynamic package Accessories: - Paper band filter 600l - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x Oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, pictured tools, and clamping devices are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, Helium leak detector Manufacturer: Pfeiffer Type: HLT 260 Condition: Tested and ready for use Hnjdec S D A Tepfx Aiyol Connection: 230V Delivery time: ex stock (u.ue.V.)

Condition: ready for operation (used), A conventional lead and feed screw lathe Antonio Anslemi is available. Center height: 260mm, center distance: 1500mm, swing diameter over bed/support/gap bed: 520mm/320mm/670mm, bed width: 370mm, speed: 1400rpm, tailstock quill diameter: 65mm, tailstock stroke: 240mm, machine dimensions X/Y/Z: approx. 3000mm/1200mm/1500mm, weight: approx. 2500kg. An on-site inspection is possible. Hnsdpfx Aieyvixuoyjl

Year of construction: 2022, condition: ready for operation (used), Binder FED 260 Drying Oven Incubator Heating Oven Brooding Cabinet No. 1148 Set Temperature: 300°C Dimensions (interior): 650mm × 515mm × 780mm (W x D x H) Dimensions (exterior): 810mm × 760mm × 940mm (W x D x H) Weight: approx. 84 kg Hnedpjyvug Refx Aiysl Power: 2.30 kW Year of manufacture: 2022 You are welcome to arrange a viewing appointment. We can arrange affordable shipping for you upon request! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop to view more of our offers. All company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and are reserved.

Condition: used, Year of construction: 2010, operating hours: 26,827 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 2,600 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 42 kVA, controller manufacturer: Siemens, controller model: 840 D SL Operate, workpiece weight (max.): 6 kg, total height: 2,800 mm, total length: 7,000 mm, total width: 5,000 mm, table width: 700 mm, table length: 2,900 mm, table load: 2,150 kg, rotational speed (max.): 8,000 rpm, overall weight: 14,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 8,280 h, spindle motor power: 23,500 W, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, We are offering this used Deckel Maho DMF 260 / 700 vertical machining center, year of manufacture 2010. X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm CNC control: Siemens 840 D SL Operate Main spindle: Spindle speed range: 8,000 rpm Main spindle drive power: 23.5 kW Tool holder: SK 40 Worktable: Clamping surface: 2,900 x 700 mm Max. table load: 2,150 kg Tool magazine: Number of tool pockets: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent pocket: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Feed rates: Rapid traverse (X / Y / Z): 40 m/min Max. feed rate: 40,000 mm/min Max. feed force: 8 kN Total power requirement: 42 kVA Machine weight approx.: 14.5 t Space requirements approx.: 7.0 x 5.0 x 2.8 m Hnsdpfsytruxsx Aiyol Chip conveyor Coolant system High-pressure cooling Internal coolant supply Paper band filter 2x rotary windows Tool magazine, 30 positions Probe Operation mode 4 Prepared for a 4th axis At approx. 7,500 spindle hours, the X-axis and tool changer were overhauled. If you have any questions or require further information, feel free to send us a message or give us a call. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in the technical data and specifications, and subject to prior sale!

Condition: new, Year of construction: 2024, Special price: €45,000 (instead of €52,500) excl. VAT. Hnedpfx Aopq R Rdoiyol Available immediately! Included Premium Features: - Heidenhain ND5023 3-Axis Position Readout - 5-Position Longitudinal Stop for the Saddle - SRW-Amestra Multifix C Quick-Change Toolholder with 4 Inserts - LED Workstation Lighting - Set of Spinelli Leveling Pads Standard Features: - Double Mechanical Clutch - Electromagnetic Brake - Rapid Traverses - Air Device on the Tailstock to Facilitate Movement Along the Bed - Cast Iron Bed, Legs, Headstock, Tailstock, and Slide - Bed Guides are Induction-Hardened and Ground - Headstock with Induction-Hardened and Ground Gears - Spindle Mounted on High-Precision Bearings - Friction-Free Slide Sliding - Electrical System in an Airtight Cabinet with Siemens and/or Schneider Components - Spindle Reduction Sleeve - 2 Dead Centers - Chuck Guard with Microswitch Turret Plexiglas guard, rear guard along the entire length of the machine, lead screw and feed rod guards, emergency stop button - Chip tank on wheels - Cooling system with electric pump - Central lubrication of the guideways with automatic pump - Follow and fixed steady rest - Service tools and wrenches, test certificate, electrical diagram, operation and maintenance manual - Machine built according to EC standards Optional equipment: - 3-/4-jaw chuck Technical specifications - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing without bridge: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speeds: 12 - Spindle speeds: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Modular threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametrical pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill stroke: 200 mm - Tailstock quill mount: MK5 - Total weight: 3200 kg

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 245 A, welding current at 100% duty cycle: 210 A, welding current (min.): 5 A, welding current (max.): 260 A, Rehm Invertig 260 AC/DC Digital – Water-cooled TIG ACDC 3-month warranty Refurbished, tested, serviced, and ready for immediate use Specifications: Hnedpfx Aieywgpaoysl 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 Step Pre gas / Post gas Start current / End current Up slope / Down slope Frequency adjustable AC Balance AC Frequency Electode option Including Parweld PRO20 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), Year of construction: 2024, Binder CB 260 Incubator with O2 control The incubator is unused and originally packaged. Model CB 260 | CO2 Incubators with Thermal Sterilization and Sterilizable CO2 Sensor Advantages • Safety thanks to maximum protection against contamination of cell cultures • Reliability due to consistent comfort conditions for cells • User-friendly thanks to easy routine cleaning and convenient operation Hnodpfjxaungox Aiyel • Cost-effective operation without consumables PRODUCT DESCRIPTION The high-performance and versatile CB CO₂ incubator is suitable for cell testing in substance research and medical studies. With a wide range of options and accessories, the BINDER incubator easily fulfils complex cultivation tasks or individually specified growth conditions at low oxygen concentration. KEY FEATURES • Optimized dual-chamber humidification system with anti-condensation protection • Proven anti-contamination concept with 180°C thermal sterilization • Hot air sterilized CO₂ sensor with single-source infrared technology • Seamless inner chamber made of stainless steel with stainless steel bead slide-in supports • Fanless interior with Venturi CO₂ gas mixing nozzle • Intuitively operated touch controller • Internal measurement data recording system, data export via USB interface in a common format • Fault diagnostics system with visual and audible alarm Connections: Ethernet, USB, volt-free alarm contact CO₂ Fail Safe System for pH safety of cell cultures

Condition: used, mileage: 50,000 km, power: 77 kW (104.69 HP), first registration: 11/2021, fuel type: diesel, empty load weight: 2,039 kg, overall weight: 4,540 kg, next inspection (TÜV): 03/2028, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, total length: 4,973 mm, construction height: 2,330 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), onboard computer, soot filter, * Appointment scheduling for consultation and test drives = shorter waiting times: * Your time is valuable and should not be spent waiting. Therefore, we kindly ask you to schedule an appointment by phone for consultation or a test drive. * Service booklet * Non-smoker vehicle * This vehicle comes with a well-maintained service history * Last service was carried out at 40,109 km TRANSMISSION / CHASSIS * Engine: 2.0 L – 77 kW TDCi CAT * Drive type: Front-wheel drive * 6-speed manual transmission LIGHT & VISIBILITY * Intermittent and adjustable windshield wipers * Headlight level adjustment * Turn indicators integrated in exterior mirrors ENTERTAINMENT * Audio system 21: Digital radio reception (DAB / DAB+) with 8" multifunction display * Mobile phone interface * Multifunction steering wheel ASSISTANCE SYSTEMS & SAFETY * Driver assistance system: Crosswind Assist * Driver assistance system: Hill Start Assist * Driver-side airbag * Passenger-side airbag * Passenger airbag deactivation * Seatbelt pretensioners for driver and passenger * Anti-lock braking system (ABS) * Electronic Stability Program (ESP) COMFORT * Additional electric heater * Rear wing doors without glazing * On-board computer Hnedpfxeyr Uldo Aiyol * Diesel particulate filter * Start/stop system * Air conditioning * Black exterior mirrors * Rear tailgate/boot handle in black * Daytime running lights * Automatic headlights * And much more * All information provided without guarantee. This is not a guaranteed specification. Subject to error and prior sale. * Our services: * Financing available with or without down payment * Registration service * Trade-in of your old car * Delivery possible * Tire service, winter and summer tires available at extra cost * We speak several languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak * We look forward to your visit!

Condition: used, Year of construction: 2013, axle configuration: 4x4, fuel type: diesel, color: red, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 15.950 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.560 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Hnsdpsv Tiqmjfx Aiyel Delivery terms: EXW Max. horizontal reach: 1610 m Transport dimensions (LxWxH): 12,01x2,38x2,71 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: HA260PX Year of build: 2013 Condition: Used Data: Max. working height: 25,60 m Platform height: 23,60 m Max. reach: 16,10 m Platform lifting capacity: 230kg Platform dimensions LxW: 1,80 x 0,74 m Swivel range: 360° Max. climbing capacity: 40% Total dimensions LxWxH: 12,01 x 2,38 x 2,71 m Movable up to working height: 25,60 m Wheel pressure max.: 64,5 kN Ground clearance: 0,30 m Drive type: Diesel Own weight: 15.950 kg Special features: Rotating work basket, basket arm/vertical rotation angle 140°, all-wheel drive, differential lock, permanently installed soot filter. Location: 41468 Neuss immediately available

Condition: excellent (used), Stock number: 2896 Manufacturer: Heraeus Year of manufacture: Machine number: 7406922 Type / Model: MR 260 Hnodpfxjurf H Rs Aiysl Interior width x height:: 260 x 160 mm Interior depth: 500 mm Temperature: up to 1000 °C Connection: Accessories/equipment: Condition: very good Weight: 0.15 t Dimensions: 1,100 x 700 x 1,600 mm

Condition: used, power: 189 kW (256.97 HP), fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: air conditioning, PRIVATE NEGOTIATION CHASSIS CAB XB 260FA 14 TON WHEELBASE 4500 mm. VEHICLE OPTIONS: - Reinforced mechanical cab suspension; - Fog lights; - Pneumatically adjustable steering column; - ADR; - Spare wheel; - PX-7 engine; - 200L fuel tank; - Rear underrun protection bar; - Rear light brackets; - Warranty Plus Vehicle 3 years - 200,000 km. Vehicle available at our Calcinato location: Via Statale, 98 – 25011 Calcinato (BS) Email: info. Tel. Offer valid for contracts and registrations until 30/04/2026, pending approval. - We accept trade-ins of any vehicle subject to appraisal. - Financing or Leasing available for any amount according to customer needs. We are EXPERTS in remote negotiations, offering you the best solution for purchasing our vehicles even if you live far from the Province of Bergamo. Please verify the features of the published vehicle. Lodotruck s.r.l. declines any responsibility for possible unintentional discrepancies in the description shown in this advertisement. If you are interested in the vehicle, please reply to the ad indicating: your city and phone number. In case of a trade-in, indicate: make, model, colour, month and year of registration, mileage, main accessories, gearbox, KW/HP, and condition of the vehicle (preferably with attached photos). With this information, we can reply to you more quickly. CUSTOMER SERVICE OPENING HOURS: Hnedjvc Ixbepfx Aiyel Monday to Friday 8:30 AM - 12:30 PM / 2:00 PM - 6:30 PM Saturday: 8:30 AM - 12:30 PM

Condition: used, power: 189 kW (256.97 HP), fuel type: diesel, empty load weight: 12,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2026, Equipment: air conditioning, PRIVATE NEGOTIATION Hnedpfx Aiswkk Aqeyel CHASSIS CAB XB 260FA 12 TON - WHEELBASE 3900 mm. Vehicle available at our Calcinato branch: Via Statale, 98 - 25011 Calcinato (BS) Email: info. Tel. Offer valid for contracts and registrations until 30/04/2026, subject to approval. - We accept trade-ins of any vehicle, subject to appraisal. - Financing or leasing solutions available for any amount according to the customer's needs. We are SPECIALISTS in remote transactions and can offer you the best solution to purchase our vehicles even if you live far from the Province of Bergamo. We invite you to verify the specifications of the listed vehicle. Lodotruck S.r.l. accepts no liability for any unintentional discrepancies with the description shown in the advert. If you are interested in this vehicle, when responding to the ad, please indicate: city and telephone number. In case of a trade-in, please specify: make, model, colour, month and year of registration, mileage, main features, transmission, kW/HP, and vehicle condition (preferably with photos attached). With this information, we can reply to you more promptly. CUSTOMER SERVICE HOURS: Monday to Friday: 8:30 a.m. to 12:30 p.m. / 2:00 p.m. to 6:30 p.m. Saturday: 8:30 a.m. to 12:30 p.m.

Year of construction: 2011, condition: ready for operation (used), Miter range: 90°/30°, saw band inclination: 2°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: 3350mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 2000mm/1650mm/1850mm, weight: approx. 650kg. An on-site inspection is possible. Hedpoyttvwsfx Aiysnl

Condition: used, Year of construction: 2024, _____Basic equipment: two ploughshares mounted on the frame with king pin Collision protection via spring flaps Center pin secured against accidental triggering Hydraulic swivel device left-right Hydraulic installation with 4 quick hydraulic couplings and 1 unpressurized return connection Kerb deflector left-right Three-point mounting plate CAT 2N, 2 and 3N Overpressure valve Double-acting swivel cylinder Pendulum compensation up to 8° Adjustable sliding skids Central sliding skid with PU foot Spacer block for 40° end stop angle Municipal paint RAL 2011 Warning flags with holder LED lighting (only from 260 to 340) Steel scraper barOptional equipment:Three-point linkage Cat IIBoundary lights Selector valve for synchronous control 12 VSteel scraper barPicture serves as an example,Location:null Hnodpfxju Hv Szs Aiyol

Condition: used, Year of construction: 2010, Diskus Werke DDS 750 XRE Double-Sided Surface Grinding Machine Hjdpfx Aisx Squvsyenl Not in working condition - power unit and control unit removed; Siemens Sinumerik 840D; 2 vertical grinding spindles; workpiece - grinding size 2-80mm; working width max. 420mm; grinding wheel dimensions: outer diam 750/inner diam 250mm; width 80mm; machine dimensions W/D/H=5000/4000/3100mm; weight 13.000kg; 400V/50Hz; 115kW This machine is considered as Dual use acc. to 2B201b and requires an export licence!

Condition: used, Year of construction: 2011, Case maker Hnedpfswdgfzjx Aiyjl Kolbus DA 260 Year: 2011 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic case counter - Board magazin for manual loading - Board cutter: PS - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 104 mm Max. mechanical speed: Up to 40 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, working width: 2,000 mm, total length: 6,000 mm, overall weight: 3,000 kg, cutting height (max.): 35 mm, TECHNICAL DETAILS Working width min.: 520 mm Working width max.: 2,200 mm Cutting height (max.): 35 mm Maximum passage height at existing milling cutters: 35 mm Feed speed: not adjustable (fixed setting, value not specified; estimated at approx. 8–10 m/min) MACHINE DETAILS Type of input power: Alternating current (AC) Dimensions & Weight Hnodpfxjyttdhj Aiyol Dimensions (L x W x H): 6,000 x 4,000 x 3,000 mm Weight: 3,000 kg EQUIPMENT Soundproof cabin Five processing axes per side, mechanically adjustable

Condition: used, cutting diameter 260 mm band length 450 x 40 x 2 mm capacity 60 degrees: square 240 mm Hnsdpfx Ajyt R Ikeiyel 260 x 180 total power requirement 2,0/2,6 kW weight of the machine ca. 1,4 t dimensions 2,1 x 1,7 x 1,0 m