Used Swing Out Arm for sale (13,422)

Condition: excellent (used), Here we offer a Bosch swivel arm robot SCARA SR8 with control unit. Bosch swivel arm robot SCARA SR8 Control unit Type: SCARA SR8 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Ltedpfxsdyaibj Aanja Written order possible by email or fax

Condition: excellent (used), Hydraulic Swing Arm Punch Press Manufacturer: Pedersen Stock no.: 3751 Lsdpfxex A Hwlo Aanota Model: 273 M * Pressing force: 20 tons * Stroke: 150 mm * Throat depth: mm * Table size: 1020x505 mm * Punch size: 760x530 mm * Motor power: kW * Weight: approx. 650 kg

Condition: repair required (used), Machine number: 63882 Type / Model: 8LES pressing force: 22 t table: 900 x 450 mm punch width: 350 mm Installation height without / with support plate: mm Ledpfx Aasgd R Sgjneta Stroke: 8 to 150 mm Condition: Disassembled, needs to be assembled, not tested The cylinder holder of the machine was broken. Spare part was made - see also pictures. Price as-is, price after assembly on request.

Condition: used, functionality: fully functional, Swing-arm punching machine Universally applicable swing-arm punching machine, notable for the following features: Quick and easy tool setup Infinitely adjustable return stroke Frame made from robust steel construction User-friendly arrangement of controls Safe electric two-hand operation Stroke counter Technical details Type: 1028C Punching force: 200 kN Table width: 1,000 mm Table depth: 500 mm Swing-arm size: 550 x 550 mm Stroke: 8 – 80 mm Motor output: 2.2 kW / 400 V / 50 Hz Oil requirement (ISO VG 46): approx. 60 L Dimensions: 1,000 x 950 mm Ltodpsw Rb Amefx Aanja Weight: 1,140 kg

Condition: new, carrying capacity 3,0 t number of suction cups 8 suction cup dia. -- Year of construction 2017 - NEW - exhibition machine In contrast to most vacuum systems / lifting systems, the SOLIDswing constructed so that the recorded disk always remains vertical when it is recorded vertically. The plate can without precise positioning of the Suction cups are accommodated and this is independent of the balance Ltedpfx Ajtv Rhcoanea Way of working much faster and safer than with conventional manual ones Vacuum systems.

Condition: good (used), Year of construction: 2008, Industrial robot Manufacturer: Kuka Model: KR150-2 Swingarm Carbon Year of manufacture: 2008 Weight: 1267 kg Kuka Controller: KRC2ed05 Weight: 205 kg Processor: 2 GHz Operating system: WinXP Software version: V5.6.6 Kuka teach pendant: KCP2ed05 Kuka connection cables: 7m/15m Ljdpfoq N A Hpsx Aansta Custom design with extended carbon upper arm. This allows axis 3 to swing further to the rear. Originally a KR150-2 Series 2000 from 2008.

Condition: good (used), Load capacity: 50 kg Ledeh Ri Svspfx Aanota Working length: 7000 mm

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee Lodpfx Aasx Itrpsnjta - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... Lodpfxsx Itrco Aanjta We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. Ltjdpex Itq Eofx Aanja - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Cantilever shelf, double-sided, new goods Data: - H: approx. 400 cm - W: approx. 256 cm - L: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle dimension: approx. 131 cm Ljdox Dkr Aepfx Aaneta - New goods from the factory - Double-sided - 500 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 4 storage levels (5 storage levels) - Delivery time approx. 4 weeks Shelf consists of: - 015 x stands, double-sided, including base approx. 400cm made of IPE160. - 120 x cantilever arms approx. 120 cm made of IPE 80, without deflectors - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf uprights and cantilever arms can be statically verified, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Brackets made of angle steel, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €12,450.00 net plus statutory VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany Lodpsx Dkrpjfx Aansta - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. Lsdpfx Aaex Dkq Sonjta - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm Ljdpsx Dkq Ejfx Aansta - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Lodpfox Dkqrjx Aanjta Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.

Condition: like new (used), functionality: fully functional, total length: 400 mm, Suitable with: KRC2 KR210 series and KR150 series Lsdjq Hd Sdspfx Aansta Length: 40 cm (makes KR210 a KR210 L150) Condition: Refurbished and repainted to KUKA's orange

Condition: good (used), Atom SE 25 Hydraulic Arm Press This machine is in perfect condition and ready to operate. It is ideal for die-cutting difficult materials, particularly in the leather goods and printing industries. It can be used with both leather goods and bookbinding dies. It cuts paper, cardboard, leather, plastic, etc. Pressure: 25 tons Power: 380V Table dimensions: 1000mm x 500mm Ltjdpfx Asx Nc Agoanoa Hammer dimensions: 500mm Maximum stroke: 90mm Motor power: 0.9kW Weight: 1030kg Two-handed control.

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 8300 kg Additional Equipment RDS arm control software Portable laptop configured for operation This ROMER Absolute Arm 7730 was manufactured in 2017. It features a 3.0 m measurement range, volumetric accuracy of ±0.040 mm, and weighs 8.3 kg. Designed for ease of use with a Zero-G counterbalance, carbon fiber tubes, and continuous rotation of the main axis. Includes a mobility package with batteries and Wi-Fi, and a magnetic base for versatile mounting. If you are looking to get high-quality measuring capabilities consider the ROMER Absolute Arm 7730 machine we have for sale. Contact us for more information. Application Types Ledpfxsx D Nxuo Aaneta Measuring

Condition: used, Year of construction: 2000, sheet length: 4.100sheet thickness: 12total power requirements: 30weight approx.: 16300messurements (LxWxH): 5350 x 2250 x 2250back gauge: 1000New Price: approx. 100,000 EURO Condition: Used, very good condition Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: - Operating manual in GERMAN - Machine and equipment comply with CE regulations Lodpfx Ajwiatvsanjta

Condition: used, machine/vehicle number: YS2P4X2000208xxxx, mileage: 2,50,000 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 21382 Specifications: - 2012 model - EU approved until 17.10.2026 - Km: approx. 250,000 - Euro 5 - 4x2 - 280 hp - Wheelbase: 430 cm - Winter approved tires (see pictures) - New two-year inspection on printer - Automatic - Radio/DAB - Ready for delivery Description: 2012 Scania P280 4x2 lift dumper that has recently been EU approved. The printer has also been checked and approved. Ltedpfxoxfgb Ne Aanja Ready for delivery. Km: 250000 HK: 280 Technical approved: Yes EU-approved until: 17.10.2026 Own weight: 10940 Total Weight: 21500 Payload: 10485 Width: 255 Length: 730 Euro: 5 Model: P280 Gearbox: Automatic

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Ltedjd Akygjpfx Aanea Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: used, Year of construction: 1973, Storage location: Nattheim Ltsdpsvvkt Usfx Aanoa

Condition: ready for operation (used), Year of construction: 2011, This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information. Ltsdsx Enknepfx Aanja Application Types Robotics

Condition: used, machine/vehicle number: W1T9642411045xxxx, mileage: 2,18,000 km, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 22097 Specifications: EU approved until 06.08.2026 Mileage: approx. 218,000 km (may increase) Transmission: Automatic Suspension: steel front, air rear Retarder Euro 6, 530 hp Good tires Steering on 4th axle JOAB body 24T hook with articulated arm Remote control Wheelbase: 340 cm Air horns Extra lights Bunk Radio/CD Climate control / AC Video available Delivery by agreement Description: 2020 Mercedes tridem hook truck.Container can be included at an additional cost.24T JOAB hook with articulated arm and remote control. Ltedpfx Aasx Nl I Ejnea Km: 218000 HK: 530 Technical approved: Yes EU-approved until: 06.08.2026 Own weight: 14200 Total Weight: 35500 Payload: 21225 Width: 254 Length: 887 Euro: 6 Model: 2020 Mercedes Arocs 3253 Tridem Krokbil Gearbox: Automatic

Condition: ready for operation (used), Year of construction: 2019, General Data Machine weight 260 kg Main Drive Number of axis 6 Additional Equipment High Pulse Welding Power Source Kit: Phases: 3*400V / Operating Range: 20-450A / Welding Voltage: 15-36.5 V / Protection Class: IP23 / Programs: MIG/MAG, Pulse ARC, MMA/s /Components: Torch, cables, wire feed mechanism, wire spool with bracket. Automatic Burner Cleaning Station: Functions: Pneumatic cutter for nozzle cleaning, wire cutting, silicone foaming. Ltodpex D E D Tjfx Aanoa This 3-axis KUKA KR8 R2100-2 arc HW was manufactured in 2019. Ideal for precise and efficient automation tasks, this welding robot is a robust option for industries requiring high reliability and performance. Consider the opportunity to buy this KUKA KR8 R2100-2 arc HW welding robot. Contact us for more information. Application Types Robotics