Used Consumption Goods for sale (25,284)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 0990200191, For sale is a professional Canon Colorado 1650 UVgel large-format printer for industrial roll-to-roll printing. Rjdpfx As Agu Hksiroch The machine is in good used condition with typical signs of wear and tear. It can be switched on and displays the status "Ready" on the control panel. IMPORTANT: A test print could not be performed as no printing material is currently available. Therefore, the actual printing function and print quality, as well as the condition of the print heads, could not be fully verified. Technical data * Manufacturer: Canon * Model: Colorado 1650 * Printing technology: UVgel * Maximum material width: 1,625 mm * Printing inks: CMYK (Canon UVgel 460) * Print resolution: up to 1,800 dpi * Matte and gloss printing via FLXfinish+ * Automatic material feed with dual roll system * Professional roll-to-roll large-format printer Operating hours according to display * Material consumed: 29,559.7 m² * Material length: 20,835.9 m * Actually printed area: 22,664.1 m² * Total ink consumption: 247.554 liters The counter readings are documented in the pictures. Condition and features The machine is in good external condition. The mechanics, roll guide, control panel, and ink supply can be seen in the photos. Four Canon UVgel-460 ink containers (CMYK) are included. No definitive statement can be made about the current fill levels. A complete functional test was not possible due to the lack of printing material. Therefore, the machine is sold expressly as a used device, with the printing function unverified, in its current condition. The machine is of particular interest to advertising technicians, printing companies, large-format printing businesses, or as a source of spare parts. Collection and transport Due to its size and weight of approximately 740 kg, professional collection and suitable transport are required.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 32-00-0153-5 / 32-00-0114, type of input current: AC, total height: 2,622 mm, total width: 1,911 mm, total length: 3,764 mm, overall weight: 1,150 kg, input frequency: 50 Hz, operating pressure: 6 bar, Equipment: documentation/manual, 2x ETT Packaging Technology Tray Erectors (Cardboard Tray Erectors) – TF 30 L (2014) + TF2 (2020) – including complete documentation For sale are two used, high-quality tray erectors from the renowned German manufacturer ETT Packaging Technology (Made in Germany). Both machines come from a company liquidation, have been dismantled, and properly disassembled. They are in good, functional condition (only dusty) and come with complete documentation (layout, CE declaration of conformity, parts lists, electrical diagrams, operating manual, etc.). All format tools are available. Machine 1: Tray Erector TF 30 L • Machine No.: 32-00-0114 • Year of manufacture: 2014 • Weight: 2,600 kg • Power: 15 kVA • Connection: 3x400 V/N/PE 50 Hz • Air consumption: 30 NL/min at 6 bar • Dimensions (L x W x H): 3,677 x 1,603 x 2,408 mm Rcedpfx Aioz R Ucxoreh Negotiable net price: €25,000 Processable formats (Fefco 0453, hot glue): 1. 292 × 187 × 218 mm – approx. 25 pieces/min. 2. 396 × 286 × 241 mm – approx. 23 pieces/min. 3. 592 × 388 × 300 mm – approx. 18 pieces/min. Equipment (excerpt): Control cabinet Rittal, frequency inverter SEW, hot melt gluing device Nordson, control system Siemens S7-300, operating panel Siemens. Machine 2: Tray Erector TF2 • Machine No.: 32-00-0153-5 • Year of manufacture: 2020 • Weight: 1,150 kg • Power: 11 kVA • Connection: 3x400 AC/N/PE 50 Hz • Air consumption: 300 NL/min at 6 bar • Dimensions (L x W x H): 3,764 x 1,911 x 2,621.5 mm Negotiable net price: €35,000 Processable formats (Fefco 0453, hot glue): 1. 320 × 235 × 120 mm – approx. 25 pieces/min. 2. 395 × 290 × 243 mm – approx. 23 pieces/min. 3. 590 × 385 × 309 mm – approx. 18 pieces/min. Equipment (excerpt): Control cabinet Rittal/ETT, frequency inverter SEW, hot melt gluing device Nordson, control system Siemens 1512SP, operating panel Siemens KTP700. Both machines are Made in Germany, with high-quality components (Siemens, Nordson, SEW, Rittal) and are ideal for professional use in end-of-line packaging. Condition: good and functional, only dusty. All format tools are available. The machines have been dismantled and properly disassembled. Terms of sale: Commercial sale. Delivery and collection possible by arrangement. Location: 41564 Kaarst-Holzbüttgen. Upon request, we will gladly send you further documents, detailed layouts, parts lists, and current pictures of the machines. Inspection possible by appointment.

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece length (max.): 2,480 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, table length: 2,480 mm, table width: 1,250 mm, CNC – MORBIDELLI UNIVERSAL 2412 TV (SCM Group) Technical specifications: Machine dimensions: approx. 4320 x 1800 x 2100 mm Machine weight: 2100 kg Working range of X-axis: 2480 mm Working range of Y-axis: 1250 mm Z-axis stroke: 150 mm Maximum workpiece thickness: 80 mm X/Y axis speed: up to 78 m/min Z-axis speed: up to 24 m/min Power supply: 3 x 400 V / 50–60 Hz Total installed power: 16.5 kW Rated current: 29 A Operating pressure: minimum 7 bar Compressed air consumption: 100–200 NL/min Drilling unit: - 12 vertical spindles - 6 horizontal spindles (2+2 in the X-axis and 1+1 in the Y-axis) + integrated grooving saw in the X-axis. Milling spindle: - power: 6.6 - 7.5 kW - speed: 1500-24000 rpm - clamping system: HSK 63F - tool rack with 10 positions Beam-type work table: 6 beams Software: Xilog Plus + PanelMac Windows XP Rcjdpfo Aduqaox Airsh Additional equipment: Suction cups Light curtain safety gate Vacuum pump 90 m3/hour Features: Suitable for MDF, chipboard, and solid wood Robust and reliable construction. Easy operation and maintenance. The machine is suitable for small to medium-sized production facilities. Inspection and testing on site are available. The machine is in good technical condition and has been regularly maintained.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, We offer for sale 2 units of MIWE roll-in e+ 6.08 rotary gas ovens (Model 2011). The ovens are in very good condition, fully functional, and have only been used 2 days a week. They are truly in excellent condition. The price for one oven is €12,000 net. In the case of purchasing both units, the price is negotiable. Baking trays and trolley systems are not included in the price. 30 trolley systems with baking trays are available. Technical specifications of the equipment (applicable to 1 unit): • Baking tray dimensions: 60 x 80 cm (600 x 800 mm) • Baking area capacity: 8.6 to 9.6 m² (depending on the number of trolley levels, 18–20) • External dimensions of the frame: 155 x 160 x 256 cm (Width x Depth x Height) • Minimum clear ceiling height: 285 cm (for exhaust, condensation, and service access) • Weight of the empty oven: approx. 1,350 kg • Heating medium: Natural gas (type H / G20), operating pressure 20 mbar • Heating power of the burner: 60 – 75 kW • Electrical connection: 3N~ 400 V / 50 Hz, power consumption of electronics and motors approx. 2.6 kW • Recommended fuse rating: 16 A Rodpfx As Aghxwsirsch • Water and drain connection: Water supply R 3/4" (cold, softened, 2-6 bar), temperature-resistant drain DN 50

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Rcodjxlngajpfx Airjh Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm Rsdez I Eggepfx Airsch very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: used, Year of construction: 2008, CEFLA FINISHING EASY 2000 DUO D Automatic Spray Coating Machine - Manufacturer: Cefla - Model: EASY-DUO D - Year of manufacture: 2008 - Working width: 1,300 mm - Operator side: left - Price: machine has not been overhauled (Overhaul available upon request) - Duo-style spray gun drive - Dry extraction - Exhaust air capacity: 12,000 m³/h - Belt conveyor system - Feed speed: continuously adjustable ~ 2–8 m/min - Belt cleaning via roller cleaning system - With paint recovery - Paint circuits installed: 2 - Number of spray guns installed: 4 (Up to 8 spray guns can be installed as an option) - Height-adjustable spray guns - Number of paint pumps: 0 Rodpe Agvccofx Airoch - Supply air filter panel - Explosion-proof design - Suitable for solvent-based paints - Suitable for water-based paints - Used machine, in good condition - Length: 4,867 mm - Width: 3,708 mm - Height: 2,780 mm - Total power consumption: 18 kW - Location: in stock - Voltage fluctuations: max. +/- 5% _____ Optionally, we can also provide you with a quote for the installation and commissioning of the system, as well as employee training . Upon request, we also offer regular maintenance and servicing of the machine. For more information, please feel free to contact us!

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. Rcjdpfx Aijztyxdsrjh The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: S/70032, grinding width: 1,360 mm, power: 49 kW (66.62 HP), height adjustment type: electric, The refurbished automatic wide-belt sanding machine is designed for calibrating and final sanding of solid wood. This model belongs to the higher range of automatic wide-belt sanding machines, characterized by an exceptionally rigid frame, top-quality sanding performance, and versatile applications. Rcsdpez D Ufdjfx Airoh Main components: 1. Steel roller – 15 kW 2. Hard rubber roller – 15 kW 3. Mechanically adjustable platen – 11 kW + Brushing/cleaning unit at the outlet (without tooling). Sanding width 1360 mm Working thickness 3 – 160 mm Motorized adjustment of working thickness with LCD display Automatic centering of the feed belt Total maximum power consumption 49.8 kW Conveyor in good condition CE safety standard Weight approx. 4000 kg

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, 🔬 Eppendorf 5810 R Centrifuge Specifications Rcodpfj Ad I Ekex Airoh • Maximum Rotational Speed: 14,000 rpm (depends on the rotor) • Maximum Relative Centrifugal Force (RCF): 20,913 × g • Maximum Chamber Capacity: 4 × 750 mL (3 Liters total capacity) • Temperature Control Range: -9 °C to +40 °C • Programs & Memory: 35 user-defined program slots • Acceleration / Braking Ramps: 10 / 10 independent profiles • Timer Range: 1 to 99 minutes or continuous operation • Cooling Features: • FastTemp function for rapid pre-cooling of the rotor chamber • Continuous cooling to maintain temperature when the lid is closed and the unit is idle • ECO shut-off that turns off the compressor after 8 hours of inactivity to save energy • Safety Configurations: Automatic rotor detection with speed limitations, automatic imbalance detection, steel-armored safety chamber, and a motorized lid lock. • Noise Level: Less than 70 dB(A) • Power Consumption: Maximum 1,650 W 🌀 Eppendorf FA-45-30-11 Rotor Specifications • Rotor Angle: 45° • Maximum Capacity: 30 × 1.5 mL / 2.0 mL micro test tubes • Maximum Speed (with 5810 R): 14,000 rpm • Maximum RCF (with 5810 R): 20,817 × g • Maximum Centrifugation Radius: 9.5 cm • Maximum Load Weight: 30 × 3.5 g (includes weight of adapter, tube, and liquid content) • Maximum Tube Diameter Compatibility: 11 mm • Lid Type: Aerosol-tight aluminum rotor lid with Eppendorf QuickLock mechanism for fast, one-handed locking. • Adapter Adaptability: Can accommodate 0.2 mL PCR tubes (max RCF: 16,200 × g, radius: 7.4 cm) via optional conical adapters. Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Compact electric rotary oven Sveba-Dahlen with rotary platform, suitable for bakeries with limited space. Touch control panel with Sveba-Dahlen system Dual fans for even airflow Powerful heat exchanger - fast heating with low consumption Strong overlapping insulation - effectively prevents heat leakage Stainless steel exterior and interior - keeps the surface temperature low and makes cleaning easier Strongly constructed stainless steel hood for efficient collection of fumes when the door is opened Parameters Sheet size: 600 x 800 mm Outer dimensions of the oven (w x h): 1450 x 1333 x 2445 Heating: electricity (60kW) Number of trolleys: 3 pcs Trolley dimensions (w, h, h): 675 x 825 x 1795 mm Rodetltr Nopfx Airech Oven is in very good condition. Used only 5 years in small bakery.

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Rcodpfx Aiszacwdoreh Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: excellent (used), Year of construction: 2015, working width: 3,000 mm, total height: 1,000 mm, cutting height (max.): 10 mm, The ATOM FlashCut EASY 888 L30 plotter is an advanced digital knife cutting machine designed for precise and rapid cutting of a wide range of materials, including leather, textiles, foams, and plastics. It is especially valued in the footwear, leather goods, and technical gasket/component manufacturing industries. ⸻ 📐 Technical Specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Key Features • Versatility: The plotter enables cutting of various materials, from soft leathers to rigid plastics. • Ergonomics: Its compact and ergonomic design ensures ease of operation and space savings in the production facility. • Vacuum system: The dual-zone vacuum system ensures stable material hold during the cutting process. • Cutting head: Supports various tools, including oscillating knives and crease tools, enhancing production flexibility. ⸻ 🏭 Industrial Applications The ATOM FlashCut EASY 888 L30 plotter is used in: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising materials production ⸻ 🛠️ Additional Information Rodpfoy D Sa Dsx Airsch The L30 model is particularly recommended for companies seeking a solution that combines high cutting precision with production efficiency. With the ability to process large material formats and support multiple cutting tools, this plotter is suitable for both serial manufacturing and individual project tasks.

Condition: excellent (used), Year of construction: 2008, The ATOM FlashCut 3010 plotter is an advanced digital knife cutting machine designed for precise and fast cutting of a wide range of materials, such as leather, textiles, foams, and plastics. It is particularly valued in the footwear, leather goods, and gasket/component manufacturing industries. ⸻ 📐 Technical specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg Rodey D E R Nepfx Airsch ⸻ ⚙️ Main features • Versatility: The plotter enables cutting of various materials, from soft leathers to hard plastics. • Ergonomics: Compact and ergonomic design ensures easy operation and space-saving installation in production facilities. • Vacuum system: Dual-zone vacuum system ensures stable material hold-down during cutting. • Cutting head: Supports multiple tools, including oscillating knives and creasing tools, providing greater production flexibility. ⸻ 🏭 Industrial applications The ATOM FlashCut EASY 3010 plotter is used for: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising material production ⸻ 🛠️ Additional information The 3010 model is especially recommended for companies seeking a solution that combines high cutting precision with production efficiency. Thanks to its ability to process large-format materials and support for various cutting tools, this plotter is suitable for both serial production and custom projects.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, type of input current: AC, space requirement width: 762 mm, space requirement length: 1,468 mm, space requirement height: 1,278 mm, overall weight: 300 kg, warranty duration: 6 months, Equipment: CE marking, Two coordinated CNC milling machines / special machines for the fully automated series production of consumables. The product is repeatedly requested in large quantities in international online and retail trade; worldwide, there are only a few manufacturers that produce this product. THE MACHINES – KFM25: produces the blank from the solid material – PFM25: processes the functionally critical high-end profile EQUIPMENT – Process: Infeed via conveyor belt → Machining → Ejection – Industrial control with touch operation, quantity input and counter – System software configured for 6 products, easy changeover Rcjdpfx Aj Afbvroireh – Closed-loop stepper motors, milling spindle 2.2 kW/ER20 – Integrated vacuum, extraction Ø 90 mm – CE marking with declaration of conformity – 1-day on-site training included during handover TECHNICAL DATA – Year of construction 2025, used, very good condition – 230 V / 50 Hz, pneumatics 6–8 bar – Repeatability approx. ± 0.01 mm – Weight approx. 150 kg per machine PERFORMANCE – approx. 40,000 pieces / 1-2 shifts per machine and month – Material consumption approx. €0.10 / piece – Achievable selling prices up to approx. €3.80 / piece Inspection with test run possible in Germany at short notice, handover by arrangement. Sold as seen, excluding any warranty for material defects and only to businesses. All information is based on experience and is without guarantee. Only the written purchase agreement is binding.

Condition: used, Year of construction: 2015, functionality: fully functional, This is a 100-liter electric tilting, rapid-cooking kettle from the premium manufacturer MKN, type Optima 850. After a comprehensive inspection, the unit is in flawless, good used condition, with a 6-month warranty on all electrical parts. !!! Price upon request !!! You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Checked & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1200 x 850 x 700 mm Inner kettle: Diameter 665 mm, 500 mm deep Power connection: V: 400 / kW: 21 Weight: 225 kg Serial number: 15202757 Type: 2023007S Nominal capacity: 113 liters Usable capacity: 100 liters Year of manufacture: 2015 Electromotive tilting device with hand switch Inner kettle: Ø 630 mm, 397 mm deep, material 1.4404 Heating time: 26 min. Power selector switch Limit switch Temperature controller Safety temperature monitor Indicator lights Tube heating element Pilot heating element Contactor Water solenoid valve Level controller with level electrode Electrical fixed connection IPX5 Fittings: Vent and bleed valve, safety valve Condition: Used, major inspection carried out, fully functional Further information: Double-jacketed kettle with separate, integrated and maintenance-free steam generation system VAPRO for rapid heating times and low energy and water consumption as well as high efficiency Short heating times thanks to the rapid steam system VAPRO - protects the food and saves time Automatic monitoring and replenishment of operating water, ensuring constant readiness for operation Standard equipment with 3 cooking levels (gentle simmering, medium and strong boiling) Rcodpfx Ae Af Itveirsh Thermostatic or electronic temperature control Standard with double-walled hinged lid and mixing tap The tilting angle of the kettle of more than 90 degrees makes pouring, emptying and cleaning easier Ideal kettle support prevents the pouring jet from shifting and guarantees complete emptying The large pouring height allows for problem-free emptying into larger containers All fittings and instruments are integrated into the side frame Tilting manually or electromotively Standard prepared for connection to an energy optimization system with a potential-free contact Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 1,15,00,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Rcjdpev Nwgnofx Aireh Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: excellent (used), Year of construction: 2025, STASZAK KWE-100 Professional Electric Smoking & Cooking Chamber / Smokehouse – 100–130 kg – 2025 For sale: STASZAK KWE-100 professional electric smoking and cooking chamber with integrated wood-chip smoke generator, manufactured in 2025. Lightly used and in excellent working condition. Suitable for processing meat, sausages, poultry, fish, cheese and other food products. Rodpfx Asz It Hhoirech The integrated smoke generator uses natural wood chips, allowing different wood varieties to be used depending on the required smoking process and flavour. Original purchase price: £22,000. ### Manufacturer & Support Manufactured by PPHU STASZAK, an established Polish manufacturer of professional smoking and thermal-processing equipment with over 25 years of industry experience. The manufacturer remains in operation, with technical support, servicing and spare parts available. ### Capacity & Functions Production capacity: approx. 100–130 kg per batch / 1 smoking trolley, depending on the product and loading arrangement. Supplied with 2 stainless-steel smoking trolleys – one operating trolley and one spare/loading trolley, allowing the next batch to be prepared during operation. Processes include: - Hot and cold smoking - Cooking - Roasting and baking up to 160°C - Drying - Cooling - Automatic chamber washing/cleaning ### Technical Data Model: KWE-100 Year: 2025 Dimensions (L × W × H): 1300 × 1300 × 2300 mm Electric motor: 3.0 kW Chamber heating: 28 kW Smoke generator heater: 0.9 kW Total power consumption: 31.9 kW Power supply: 400 V, 3-phase Weight: approx. 1,000 kg Includes extractor fan, chimney, 2 stainless-steel trolleys and a selection of spare parts. Control menu available in Polish, English and Russian. ### Documentation & Demonstration Supplied with technical and operating documentation, including electrical wiring diagrams/schematics. The machine is currently installed, connected and fully operational and can be inspected and demonstrated before purchase. A live video demonstration via WhatsApp can be arranged. Additional photos, documentation and operating videos are available on request. ### Dismantling & Transport Dismantling and preparation for collection are included in the sale price. Assistance with loading will also be provided where reasonably possible. Transport/delivery can be arranged at additional cost, depending on destination. Assistance with reassembly/installation may also be available by prior arrangement at additional cost. Alternatively, the buyer may arrange their own transport. For overseas buyers, we can cooperate with the buyer's chosen transport company and assist with collection. ### Price £10,900 ONO – No VAT applicable. Located in the United Kingdom. Please contact me for further information, photos, documentation, videos, live demonstration or inspection. Other equipment also available separately: AK-Ramon AS-30 Bowl Cutter (30 L) – very good condition. Vacuum Tumbler – approx. 100–120 kg capacity. Photos and further information available on request.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, Professional Two-Needle Post Bed Machine DÜRKOPP ADLER 868-290020 M-TYPE (ECO Version) For sale is a top-class, industrial post bed machine from the renowned German brand Dürkopp Adler, model 868-290020 from the prestigious M-TYPE series. Manufactured in Europe (Czech Republic), guaranteeing the highest quality of workmanship and legendary component fit. The machine is in very good visual and technical condition – well-maintained, clean, fully functional, and ready for immediate use. 🌟 Key advantages of this unit: 🤖 Operator panel and automatic locking: The machine features automatic start and end locks controlled from an advanced control panel. The machine automatically and precisely secures the stitch to prevent unraveling, which significantly speeds up the sewing process, guarantees repeatability, and saves thread. Precise 3 mm needle spacing: A very dense, elegant, and desirable spacing. Ideal for luxurious edge stitching, delicate upholstery, and premium leather goods. The machine is equipped with a complete, original sewing set and is immediately ready for operation in this configuration. Powerful stitch length up to 12 mm: Allows for both standard construction seams and beautiful, very long decorative stitches, which are highly desirable in modern upholstery. Adjustable presser foot stroke up to 9 mm: The machine has manual adjustment of the presser foot stroke height. This allows it to “climb” and smoothly move over material thicknesses, transverse seams, or multiple layers of leather without slowing down or losing the stitch. Triple transport (feed dog, needle, presser foot): A robust mechanism that easily handles the heaviest materials. The machine sews perfectly evenly, without puckering or shifting the material layers – indispensable for thick leather, artificial leather, and upholstery fabrics. ECO version – Reliability and simplicity: A design devoid of complex electronics and pneumatics, eliminating the risk of costly failures of computer components. This machine is designed for trouble-free, long-term operation, in which the operator has full, manual control over each stitch. Energy-efficient motor with needle positioning: A modern drive provides quiet operation, high performance, and drastically reduced power consumption. The motor is equipped with an automatic needle positioning function, which significantly speeds up and simplifies the work (the needle always stops in the desired position, e.g., embedded in the material when turning the component). Application: The machine is ideal for professional workshops and production lines involved in: Automotive upholstery (seats, door panels, steering wheels, dashboards) Furniture upholstery (sofas, armchairs, mattresses) Heavy leather goods (bags, suitcases, belts, shoes) The machine is prepared for operation with a 3 mm spacing. For a decisive customer, there is also a technical possibility of configuring it for an 8 mm or 16 mm spacing. Rsdpfx As Adl H Esiroch Delivery to the customer by courier is possible.

Condition: used, CNC turning machine MONFORTS Type RNC 300 MultiTurn Rcjdpfxjzfau Ae Airoh with driven tools and Y-axis Year of manufacture 2005 CNC control FANUC Series 18i-TB Swinging diameter over bed 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 Volt, 50 Hz, 63 Amp. - hydrostatic guideways for the X, Y and Z axes - with tailstock, chuck and collet chuck - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - collet chuck HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 driven tools with collet ER 25 - chip conveyor with integrated coolant system - approx. 20,000 operating hours Footprint of the machine with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: like new (used), Year of construction: 2018, operating hours: 47 h, functionality: fully functional, Cold Jet i³ MicroClean – Compact Dry Ice Blasting Machine For sale: a used Cold Jet i³ MicroClean dry ice blasting machine, built in 2018 and with only 47 operating hours. The machine is fully functional and in very good condition. The i³ MicroClean is designed for precision dry ice cleaning. The optional DX pellet-shaving upgrade allows the machine to work with loose 3 mm pellets and dry ice nuggets. It can also be used with dry ice blocks. Machine details - Manufacturer: Cold Jet - Model: i³ MicroClean - Year of manufacture: 2018 - Operating hours: 47 - Condition: Used, fully functional - DX pellet-shaving upgrade: Available for €2,000 - Dry ice capacity with DX: approximately 4 kg Rjdpfoydpy Tjx Airjch - Variable feed rate: 0–0.23 kg/min, depending on pellet or nugget size and condition - Air consumption: approximately 0.85–1.4 m³/min at 5.5 bar, depending on nozzle - Included: 20 ft blast hose, applicator, and nozzle - Warranty: 1 year 1 x 20' blast hose 1 x Coldjet applicator 1 x nozzle Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice Cold Jet i³ MicroClean, Cold Jet i3 MicroClean, Cold Jet i³ MicroClean DX, Cold Jet MicroClean DX, Cold Jet dry ice blaster, dry ice blasting machine, dry ice blasting equipment, precision dry ice cleaning machine, compact dry ice blasting machine, dry ice pellet blaster, 3 mm dry ice pellet blaster, dry ice pellet-shaving machine, dry ice microparticle blasting machine, dry ice nugget blaster, industrial dry ice cleaning machine, low air consumption dry ice blaster, used Cold Jet machine, used dry ice blasting machine, dry ice cleaning equipment for sale.

Condition: excellent (used), functionality: fully functional, mileage: 5,580 km, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 7,300 kg, empty load weight: 6,600 kg, operation weight: 8,200 kg, number of seats: 2, Year of construction: 2012, operating hours: 5,580 h, Equipment: adjustable chassis, all wheel drive, differential lock, hydraulics, An authorized SUBARU dealer in Łaziska Górne presents a CATERPILLAR AP 300 paver. The machine has no accident history, comes from the first owner, and was used exclusively in Sweden. The AP300 is a small to medium-sized paver with a spreading width of 1.75 m to 4.0 m, making this model ideal for work on city streets, bike paths, sidewalks, shoulders, and other small to medium-sized areas. NOTE! We have two identical CAT 300 units available (see the last photos) - this orange one has only 2061 operating hours. The price is lower before refurbishment compared to the yellow one. A significant discount is available when purchasing two units. - Transport is possible within the European Union. ===•••===== A narrowing attachment allows spreading to a width of up to 700 mm (27 inches) for work in trenches and other narrow spaces. Technologically advanced options, such as eco mode, are available. Automatic filling, activation of the feeder system with a single touch, and an automated driving mode make the combination of this paver with the table an extremely efficient and versatile solution for small and medium-sized contractors. ====•••===== Machine type: Wheel-mounted asphalt paver Cat C3.3B engine Redpfx Aioy Szcksrsch Engine power 55 kW / 73.8 HP Operating weight 8000–8200 kg Transport weight 6600 kg Standard working width 1.75–3.42 m Maximum spreading width 4.0 m Minimum spreading width 700 mm Maximum output 406 t/h Max. travel speed 16 km/h Max. paving speed 61 m/min Wheelbase 1950 mm Transport and working dimensions Parameter Value Transport length 5029 mm Transport width 1938 mm Transport height 2645 mm Working length 5047 mm Working width 3180 mm Height with canopy 3415 mm Operating capacities System Capacity Fuel tank 110 l Engine oil 13.2 l Cooling system 9 l Flushing system tank 28 l Model features wheel drive providing good mobility on urban construction sites, ability to work in very narrow trenches (from 700 mm), automatic control of material feed, ECO mode to reduce fuel consumption, SE34 V or SE34 VT screed, good operator visibility and compact dimensions. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers - Please contact us directly by phone to get your best price :)

Condition: used, functionality: fully functional, Core Analytical Performance • Mass Range: m/z 15 – 1,650 • Scan Rate: 5,200 atomic mass units per second (u/sec) • Mass Accuracy: 0.1 u across the entire mass range • Mass Stability: < 0.1 u over a 24-hour period • Dynamic Range: > 6.5 × 10⁶ • Mass Resolution: Three user-selectable settings (Full Width at Half Maximum): • Unit: 0.7 u • Wide: 1.2 u • Widest: 2.5 u Ionization & Hardware Configuration • Supported Ionization Sources: Electrospray Ionization (ESI), Atmospheric Pressure Chemical Ionization (APCI), Nanospray with HPLC-Chip Cube MS interface, and Multimode source (simultaneous ESI and APCI). • Collision Cell: High-pressure, hexapole geometry equipped with linear acceleration to eliminate cross-talk and optimize fragmentation. • Scan Modes: MS scan, MS/MS Product Ion scan, Multiple Reaction Monitoring (MRM), Precursor Ion scan, Neutral Loss/Gain scan, and Selected Ion Monitoring (SIM). • Polarity Switching: Fast positive/negative switching programmed by time segments. • Vacuum System: One triple-stage turbomolecular pump backed by a standard mechanical foreline roughing pump. Physical & Utility Requirements • Dimensions: Approximately 18.5" H × 43.5" W × 26" D (47 cm × 111 cm × 66 cm) • Weight: ~236.5 lbs (107.5 kg) • Power Supply: 200 – 240 VAC, Single-phase, max consumption around 2700–2850 VA Rcsdpfx Ais Aaylzorjh Good working condition. Please check out our other listings as well.

Condition: excellent (used), CATALOGUE NUMBER: 6916 TECHNICAL DATA - Max. width of workpiece: 200mm - Max. height of workpiece: 150mm - 2 sanding units: upper – metal roller + shoe + metal roller lower – metal roller + shoe + metal roller from above: - pressure roller, metal - sanding unit - slip pressure roller, metal - cleaning brush - conveyor belt from below: - conveyor belt - 2 slip metal rollers, smooth - sanding unit - pressure roller, metal - cleaning brush - delivery roller - electrically adjustable sanding height - pneumatic oscillation of sanding belts - stepless feed rate adjustment - feed motors 0.55kW - main motors 2x4kW - air consumption 6-8 bar - diameter of dust extraction nozzles 3x80mm, 1x120mm - overall dimensions L/W/H 1800x2070x2000mm, weight 1422kg - Made in Germany, unpainted - Very good condition, used sander Net price: 22900 PLN Net price: 5326 EUR Rsdpfszty Npex Airsch Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may be subject to change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2019, Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 Injection Moulding Machine General Information Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Country of Origin: Germany CE Marked: Yes Availability: Immediately available Location: Belgium ----- Technical Specifications Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Control System: NC5 Plus / C-Dias Machine Weight: 67,600 kg Maximum Operating Pressure: 210 bar Power Supply: 3 × 400 V / 50 Hz Connected Load: 204 kVA Rated Current: 552 A ----- Operating Hours PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Heating Hours: 29,982.7 hours ----- Description Well-maintained Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 all-electric high-performance injection moulding machine built in 2019. The EL-EXIS series is specifically designed for applications requiring exceptional productivity, fast cycle times, high precision and reduced energy consumption. It is particularly suitable for packaging applications, thin-wall products and technical mouldings. The machine is equipped with the advanced NC5 Plus / C-Dias control system and remains in very good operating condition. Inspection under power can be arranged by appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. Rcedpfo Afbz Uox Aireh It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Availability: Immediately available Location: Belgium Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Machine Weight: 67,600 kg PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Maximum Operating Pressure: 210 bar