Used Swing-Arm Punch for sale (8,804)

Condition: good (used), Year of construction: 2021, With patented MULTIFORCE end-lift system! The punching press automatically adjusts the cutting force to the size of the punching tool. It does not matter how resistant or thick the material to be cut is. Cutting table: 1,000 x 500 mm Arm reach: 370 mm Maximum cutting power: 25 t – 245 kN Dimensions: 1,000 x 1,140 x 1,710 mm Net weight (with oil): 1,020 kg Ijdpfxoy Inwyo Amyjat

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1210496, type of input current: three-phase, total height: 1,260 mm, total width: 441 mm, total length: 852 mm, input voltage: 400 V, type of cooling: water, welding power (max.): 35 kVA, Equipment: documentation/manual, We offer this used medium-duty PEI POINT BSP 136 INVERTER rocker arm spot welder FR, year of manufacture 2012. Iajdoy Eyipopfx Amyet Manufacturer: PEI POINT Model: BSP 136 INVERTER Year of manufacture: 2012 Condition: used Category Id: 905 Type Id: 1918 Type: MEDIUM-DUTY ROCKER ARM SPOT WELDER FR If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: repair required (used), Machine number: 63882 Type / Model: 8LES pressing force: 22 t table: 900 x 450 mm punch width: 350 mm Installation height without / with support plate: mm Stroke: 8 to 150 mm Condition: Disassembled, needs to be assembled, not tested Iasdpfx Amogd R Sgsyot The cylinder holder of the machine was broken. Spare part was made - see also pictures. Price as-is, price after assembly on request.

Condition: new, functionality: fully functional, machine/vehicle number: 005119, Year of construction: 2016, Equipment: documentation/manual, Slewing arm – spare part – König Loader KA SL260 Complete new 25x25 KA-SL V4 thread drive with mounting parts for a loader for the lifting movement of the slewing arm – automation of the production machine (Reishauer) Koenig Automation AG – Switzerland, Item 005119 new and unused – procured as a spare part Price / details on request. All technical information is subject to typing errors/mistakes. We sell exclusively to countries of the European Community. Iasdpfsx Tqhlex Amyst

Condition: used, Year of construction: 2019, Base frame, carousel and swing arm of a Kuka KR 360 R2830 industrial robot with: Ijdpex A D Rcjfx Amysat - Axis 2 motor: Siemens 1FK7105-5AY81-1YY3-Z - Counterbalance GA16

Condition: excellent (used), Here we offer a Bosch swivel arm robot SCARA SR8 with control unit. Bosch swivel arm robot SCARA SR8 Control unit Type: SCARA SR8 Condition: pre-owned / used Iodpfjdyaibox Amyoat Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2017, load capacity: 3,000 kg, Auction of a nearly new exhibition machine! Iasdpeygxabjfx Amyet TECHNICAL DETAILS Load capacity: 3.0 t Number of suction pads: 8

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Iaodpfx Amoy Sfbksyot Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: good (used), Renz Punch 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 perforation tool (4x4mm square) and a hanger cutting module. Side tables are also included. Manufacturer’s description: Perforating machine with a working width of up to 700 mm. Designed for continuous operation and heavy loads. Foot pedal-activated operation. Perforation of up to 40 sheets (4.5 mm) in a single cycle. Quick and easy replacement of perforation strips. Available with or without a hanger cutout. Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. The machine operates on a 3-phase, 380V power supply. Weight: 325 kg. Isdpfx Amoy N Dwlsyoat Made in Germany.

Condition: good (used), Renz Punch 500 Perforator This device is in very good condition. New model with adjustable controls. Electric drive, foot pedal control. The set includes a 3:1 perforation tool, a 4x4mm hole, and a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a suspension slot Available with QSA slots (quick format change by disabling selected needles without removing the slot) Available with two-piece slots – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) Iaodpfx Amoy Hgltjyot 3-phase powered Weight: 120 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Included: Sheetmaster, Toolmaster TOP machine Price on request Ijdpex Ifcmjfx Amyeat

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 square perforation tool with a cutout for the hanger. Iajdpfx Amoyzt Nhsyot Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Requires a 3-phase, 380V power supply. Weight: 400 kg

Condition: good (used), Year of construction: 2008, Industrial robot Manufacturer: Kuka Type: KR150-2 Swingarm Carbon Year of manufacture: 2008 Weight: 1267 kg Kuka Controller KRC2ed05 Control weight: 205 kg Processor: 2 GHz Operating system: WinXP Software version: V5.6.6 Kuka Teach Pendant KCP2ed05 Kuka Connection cables 7m/15m Special construction with extended carbon upper arm. This allows axis 3 to swing further to the rear. Originally, it was a KR150-2 Series 2000 from 2008. Isdpfx Aoq N A Hpsmyeat 11526ä

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Iajdpeywdt Asfx Amyjt Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. Iasdpfjuzv Tzsx Amyst After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Iaedpfx Amoymn Hwjyot Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: good (used), Load capacity: 50 kg Iasdpfx Ajh Ri Svjmyot Working length: 7000 mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, System: • Hexagon Absolute Arm 8340, 7-Axis • RS6 Kit • CP-C Installed • Magnetic Base with Mounting Ring • Certified Length Standard – 1016mm (40 inch) • Leap Frog Kit Computer & Software: • Inspire Single Seat License • BendingStudio TUBE • BendingStudio CAD Wizard Isdpfx Amoymnvroyjat

Condition: used, Year of construction: 2000, plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD Iaodpfx Amocqxv Teyot 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 225 - table 300-400 (4) - 1x SOLD 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 9557, punching force: 110 t, stroke rate (max.): 28 1/min, working height: 990 mm, overall weight: 3,400 kg, hole diameter: 40 mm, TECHNICAL DETAILS Punching force: 110 t Punching capacity: Ø 40 x 20 mm Notching: 750 Stroke rate: 28 strokes/min Working height: 990 mm Iodoy Iwwvepfx Amyeat MACHINE DETAILS Control: conventional Dimensions & Weight Space requirement (L x W x H): approx. 2,300 x 1,300 x 2,300 mm Machine weight: approx. 3,400 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 70,119 h, machine/vehicle number: A0111A0021, controller model: TruControl 1000, laser source model: Festkörperlaser, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, Equipment: CE marking, safety light barrier, TECHNICAL DETAILS Working area: 2,500 x 1,270 mm Parts flap: 300 x 500 mm Clamping claws: 2 units Laser Solid-state laser: TruDisk 3001 LLK outlets: 1 unit Fiber optic cable: 10 m Cutting head Lens focal length: 200 mm MACHINE DETAILS Operating hours Laser on-time: 70,119 h Total operating hours: 73,936 h Control Laser control: TruControl 1000 Screen size: 15" EQUIPMENT Robust, easily accessible C-frame Precision linear guide system for high-accuracy processing Linear magazine including 2 clamping claws Maintenance-free drives Repositioning device with programmable hold-down Brush tables Good parts container Chip bin Enclosed beam guidance via fiber optic cable ContourLine FocusLine NitroLine Chiller unit Diode-pumped excitation for long service life Upgradeable for up to 3 additional LLK outlets Quick-change cutting head system ControlLine Electro-hydraulic punching head Programmable hold-down plate Tool length compensation Punch lubrication spray Slug extraction system Open control based on Bosch PNC-P Control panel with TFT color display Teleservice via Internet Automatic shutdown USB port Network connection CE marking Multi-beam light barriers Laser source safety monitoring system Quick disconnect for hydraulics Scatter radiation protection Additional LLK outlet for operation with Trumpf system MultiTool function Ijdpfx Amoy R Uatjyjat MultiBend function Thread forming function Marking / fast embossing function Roller and deburring technology function Softpunch function Adaptive stroke calibration Spray lubrication for die Additional clamping claw Individually opening clamping claws Height-adjustable clamping claws Automatic clamping claw closing Repositioning cylinder with height-adjustable pressure pieces Sensor for parts chute Loading/unloading aid for brush tables Vibration-damped foundation Chip conveyor with tilting bin Liftable brush segment Parts conveyor belt

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, operating hours: 13,817 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, punching force: 22 t, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,200 W Laser model: High-frequency excited CO2 laser TLF 3200W Press force: 22 t X-axis travel: 2,585 mm Y-axis travel: 1,280 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Laser beam hours: 13,817 h Laser on hours: 71,637 h Iasdpfx Amjy Iz H Ijyjt Operating hours: 80,188 h EQUIPMENT - Sturdy C-frame - Linear guide with integrated magazine - Maintenance-free three-phase servo motors - Programmable hold-down for repositioning - Sensor-monitored part chute 500x500 mm for punching and laser station - Ejector cylinder at the laser chute - Programmable cutting gas pressure control - Laser cutting head: 5'' lens, quick-change system, height control - Multi-beam light barriers - Quick shut-off hydraulics - Extraction system - Compact dust extractor - Protective device against stray radiation at the cutting head - Brush table - Sign function / rapid beading - Softpunch - Small parts blow-out device - Repositioning cylinder - Warp detection - Chip conveyor

Condition: new, Year of construction: 2024, punching force: 115 t, power: 11 kW (14.96 HP), PLACE OF PRODUCTION : TURKEY WARRANTY PERIOD : 12 MONTHS DELIVERY DATE : YOUR QUESTION DELIVERY METHOD : EXW BURSA/TURKEY STANDARD FEATURES : - 12 separate hydraulic pistons and 2 separate foot controls for two people to work at the same time - 2Adjustable piston stroke distance for faster work - 3Central lubrication system - 4Backrest with electric switch - 5Working lamp - 65 separate workstations on the same body: 6.1 - Ø26 mm punch and matrix and standard drilling tools 6.2 - Full round and full square material cutting knife set 6.3 - Angle cutting knife set Iedpfevfynmox Amyjat 6.4 - Blade and sheet metal cutting knives 6.5 - U-notching knife set TECHNICAL SPECIFICATIONS : Drilling force115 t Extension355 mm Stroke80 mm Strokes per min. (with 20 mm stroke)25Sheet thickness (max.))Ø 34 x 26 mm Working height935 mm Cutting capacity600 x 15 mm380 x 25 mm Steel angle 45° (1 foot)80 x 80 x 10 mmSteel angle 90°150 x 150 x 150 x 16 mm Blade length610 mmRound55 mmSquare50 mm Material thickness13 mm Width2,040 mmDepth950 mm Engine power11.0 Kw Mains voltage400 V50 Hz Height2,180 mm Weight2,920 kg

Condition: new, Year of construction: 2024, punching force: 85 t, power: 7.5 kW (10.20 HP), PLACE OF PRODUCTION : TURKEY WARRANTY PERIOD : 12 MONTHS DELIVERY DATE : INQUIRY DELIVERY METHOD : EXW BURSA/TURKEY STANDARD FEATURES : - 12 separate hydraulic pistons and 2 separate foot controls for two people to work at the same time - 2Adjustable piston stroke distance for faster work - 3Central lubrication system - 4Backrest with electric switch - 5Working lamp - 65 separate workstations on the same body: 6.1 - Ø22 mm punch and matrix and standard drilling tools 6.2 - Full round and full square material cutting knife set 6.3 - Angle cutting knife set 6.4 - Blade and sheet metal cutting knives 6.5 - U-notching knife set TECHNICAL SPECIFICATIONS : Iaodevfyngjpfx Amyst Ton 85. Engine power Kw 7.5 Dimensions: mm 1,920 x 950 x 2,040 (L x W x H). Weight: 2.315 Kg: 2.315 Kg DRILLING Drilling capacity: mm Ø 33 x Thickness 20 mm. Indentation depth: mm 355. Drilling stroke: mm 80. Working height: mm 1,080. CUTTING: Sheets: mm 380 x 20. mm 480 x 15. Blade length: mm 482. Round bars: mm Ø 50. Square bars: mm 50. 90° corner profiles: 150 x 150 x 15 mm. 45° angle profiles: mm 80 x 8. SPRAYING: Max thickness: mm 13. Width: mm 52. Depth: mm 100. Working height: mm 940.

Condition: new, Year of construction: 2024, punching force: 55 t, PLACE OF PRODUCTION : TURKEY WARRANTY PERIOD : 12 MONTHS DELIVERY DATE : YOUR QUESTION DELIVERY METHOD : EXW BURSA/TURKEY STANDARD FEATURES : - 12 separate hydraulic pistons and 2 separate foot controls for two people to work at the same time - 2Adjustable piston stroke distance for faster work - 3Central lubrication system - 4Backrest with electric switch Cy7Od27J0W - 5Working lamp - 65 separate workstations on the same body: 6.1 - Ø22 mm punch and matrix and standard drilling tools 6.2 - Full round and full square material cutting knife set 6.3 - Angle cutting knife set 6.4 - Blade and sheet metal cutting knives 6.5 - U-notching knife set HOLE PUNCH HKM 55 Diameter Ø Ø 20 x 20 mm at maximum thickness Diameter x thickness (xt) Ø 40 x 10 mm Thickness at maximum diameter Ø 100 x 3 mm Work course 60 mm Number of courses x 25 Groove depth 255 mm Working height 1030 mm FULL MATERIAL SHEAR HKM 55 Iaedpfx Amevg D Nksyet Round / quadrangular Ø 40- 40 mm ANGLE IRON HKM 55 CUTTING SCISSOR Upright angle (90°) 120 x 120 x 12 mm Angle bracket (45°) 70 x 10 mm Working height 1130 mm SHEET METAL SHEARS (BLADE CUTTING) HKM 55 Flat sheet 200 x 20 mm Flat sheet 300 x 15 mm Blade length 317 mm Angle cut 80 x 15 mm Working height 900 mm NOTCHING HKM 55 Material thickness 10 mm Width 45 mm Depth 90 mm Working height 900 mm SPECIAL MOLDS HKM 55 U-I profile knives (UPN - IPN cut 120 x 58 mm T profile blades 80 x 9 mm Special notch set 100 x 100 x 10 mm V crimping 250 x 12 mm Maximum llama crimping V crimping 500x3 mm Sheet metal bending maximum Punch at notch 125 mm Jaw depth Punch Ø 38 x8 mm in the notch section Sheet metal bending maximum TECHNICAL SPECIFICATIONS HKM 55 Engine power 5. 5 kW Weight 1520 kg Machine dimensions (LxWxH) 1500x950x1880 mm Pressure 55 tons